riscv: cpu: fu740: Add support for cpu fu740
Add SiFive fu740 cpu to support RISC-V arch
Signed-off-by: Green Wan <green.wan@sifive.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index 63665d2..a8a61a9 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -61,6 +61,7 @@
# platform-specific options below
source "arch/riscv/cpu/ax25/Kconfig"
source "arch/riscv/cpu/fu540/Kconfig"
+source "arch/riscv/cpu/fu740/Kconfig"
source "arch/riscv/cpu/generic/Kconfig"
# architecture-specific options below
diff --git a/arch/riscv/cpu/fu740/Kconfig b/arch/riscv/cpu/fu740/Kconfig
new file mode 100644
index 0000000..3a5f6e4
--- /dev/null
+++ b/arch/riscv/cpu/fu740/Kconfig
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Copyright (C) 2020-2021 SiFive, Inc
+# Pragnesh Patel <pragnesh.patel@sifive.com>
+
+config SIFIVE_FU740
+ bool
+ select ARCH_EARLY_INIT_R
+ select RAM
+ select SPL_RAM if SPL
+ imply CPU
+ imply CPU_RISCV
+ imply RISCV_TIMER if (RISCV_SMODE || SPL_RISCV_SMODE)
+ imply SPL_SIFIVE_CLINT
+ imply CMD_CPU
+ imply SPL_CPU
+ imply SPL_OPENSBI
+ imply SPL_LOAD_FIT
+ imply SMP
+ imply CLK_SIFIVE
+ imply CLK_SIFIVE_PRCI
+ imply SIFIVE_SERIAL
+ imply MACB
+ imply MII
+ imply SPI
+ imply SPI_SIFIVE
+ imply MMC
+ imply MMC_SPI
+ imply MMC_BROKEN_CD
+ imply CMD_MMC
+ imply DM_GPIO
+ imply SIFIVE_GPIO
+ imply CMD_GPIO
+ imply MISC
+ imply SIFIVE_OTP
+ imply DM_PWM
+ imply PWM_SIFIVE
diff --git a/arch/riscv/cpu/fu740/Makefile b/arch/riscv/cpu/fu740/Makefile
new file mode 100644
index 0000000..5ef8ac1
--- /dev/null
+++ b/arch/riscv/cpu/fu740/Makefile
@@ -0,0 +1,12 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Copyright (C) 2020-2021 SiFive, Inc
+# Pragnesh Patel <pragnesh.patel@sifive.com>
+
+ifeq ($(CONFIG_SPL_BUILD),y)
+obj-y += spl.o
+else
+obj-y += dram.o
+obj-y += cpu.o
+obj-y += cache.o
+endif
diff --git a/arch/riscv/cpu/fu740/cache.c b/arch/riscv/cpu/fu740/cache.c
new file mode 100644
index 0000000..680955c
--- /dev/null
+++ b/arch/riscv/cpu/fu740/cache.c
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2020-2021 SiFive, Inc
+ *
+ * Authors:
+ * Pragnesh Patel <pragnesh.patel@sifive.com>
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <linux/bitops.h>
+#include <asm/global_data.h>
+
+/* Register offsets */
+#define L2_CACHE_CONFIG 0x000
+#define L2_CACHE_ENABLE 0x008
+
+#define MASK_NUM_WAYS GENMASK(15, 8)
+#define NUM_WAYS_SHIFT 8
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int cache_enable_ways(void)
+{
+ const void *blob = gd->fdt_blob;
+ int node;
+ fdt_addr_t base;
+ u32 config;
+ u32 ways;
+
+ volatile u32 *enable;
+
+ node = fdt_node_offset_by_compatible(blob, -1,
+ "sifive,fu740-c000-ccache");
+
+ if (node < 0)
+ return node;
+
+ base = fdtdec_get_addr_size_auto_parent(blob, 0, node, "reg", 0,
+ NULL, false);
+ if (base == FDT_ADDR_T_NONE)
+ return FDT_ADDR_T_NONE;
+
+ config = readl((volatile u32 *)base + L2_CACHE_CONFIG);
+ ways = (config & MASK_NUM_WAYS) >> NUM_WAYS_SHIFT;
+
+ enable = (volatile u32 *)(base + L2_CACHE_ENABLE);
+
+ /* memory barrier */
+ mb();
+ (*enable) = ways - 1;
+ /* memory barrier */
+ mb();
+ return 0;
+}
diff --git a/arch/riscv/cpu/fu740/cpu.c b/arch/riscv/cpu/fu740/cpu.c
new file mode 100644
index 0000000..f13c189
--- /dev/null
+++ b/arch/riscv/cpu/fu740/cpu.c
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018, Bin Meng <bmeng.cn@gmail.com>
+ */
+
+#include <irq_func.h>
+#include <asm/cache.h>
+
+/*
+ * cleanup_before_linux() is called just before we call linux
+ * it prepares the processor for linux
+ *
+ * we disable interrupt and caches.
+ */
+int cleanup_before_linux(void)
+{
+ disable_interrupts();
+
+ cache_flush();
+
+ return 0;
+}
diff --git a/arch/riscv/cpu/fu740/dram.c b/arch/riscv/cpu/fu740/dram.c
new file mode 100644
index 0000000..1dc77ef
--- /dev/null
+++ b/arch/riscv/cpu/fu740/dram.c
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018, Bin Meng <bmeng.cn@gmail.com>
+ */
+
+#include <common.h>
+#include <fdtdec.h>
+#include <init.h>
+#include <linux/sizes.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int dram_init(void)
+{
+ return fdtdec_setup_mem_size_base();
+}
+
+int dram_init_banksize(void)
+{
+ return fdtdec_setup_memory_banksize();
+}
+
+ulong board_get_usable_ram_top(ulong total_size)
+{
+#ifdef CONFIG_64BIT
+ /*
+ * Ensure that we run from first 4GB so that all
+ * addresses used by U-Boot are 32bit addresses.
+ *
+ * This in-turn ensures that 32bit DMA capable
+ * devices work fine because DMA mapping APIs will
+ * provide 32bit DMA addresses only.
+ */
+ if (gd->ram_top > SZ_4G)
+ return SZ_4G;
+#endif
+ return gd->ram_top;
+}
diff --git a/arch/riscv/cpu/fu740/spl.c b/arch/riscv/cpu/fu740/spl.c
new file mode 100644
index 0000000..ea0b228
--- /dev/null
+++ b/arch/riscv/cpu/fu740/spl.c
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2020-201 SiFive, Inc
+ * Pragnesh Patel <pragnesh.patel@sifive.com>
+ */
+
+#include <dm.h>
+#include <log.h>
+
+int spl_soc_init(void)
+{
+ int ret;
+ struct udevice *dev;
+
+ /* DDR init */
+ ret = uclass_get_device(UCLASS_RAM, 0, &dev);
+ if (ret) {
+ debug("DRAM init failed: %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
diff --git a/arch/riscv/include/asm/arch-fu740/cache.h b/arch/riscv/include/asm/arch-fu740/cache.h
new file mode 100644
index 0000000..7d4fe99
--- /dev/null
+++ b/arch/riscv/include/asm/arch-fu740/cache.h
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2020-2021 SiFive, Inc.
+ *
+ * Authors:
+ * Pragnesh Patel <pragnesh.patel@sifve.com>
+ */
+
+#ifndef _CACHE_SIFIVE_H
+#define _CACHE_SIFIVE_H
+
+int cache_enable_ways(void);
+
+#endif /* _CACHE_SIFIVE_H */
diff --git a/arch/riscv/include/asm/arch-fu740/clk.h b/arch/riscv/include/asm/arch-fu740/clk.h
new file mode 100644
index 0000000..9f88361
--- /dev/null
+++ b/arch/riscv/include/asm/arch-fu740/clk.h
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) 2020-2021 SiFive Inc
+ *
+ * Authors:
+ * Pragnesh Patel <pragnesh.patel@sifive.com>
+ */
+
+#ifndef __CLK_SIFIVE_H
+#define __CLK_SIFIVE_H
+
+/* Note: This is a placeholder header for driver compilation. */
+
+#endif
diff --git a/arch/riscv/include/asm/arch-fu740/gpio.h b/arch/riscv/include/asm/arch-fu740/gpio.h
new file mode 100644
index 0000000..908e2e5
--- /dev/null
+++ b/arch/riscv/include/asm/arch-fu740/gpio.h
@@ -0,0 +1,38 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2020-2021 SiFive, Inc.
+ */
+
+#ifndef _GPIO_SIFIVE_H
+#define _GPIO_SIFIVE_H
+
+#define GPIO_INPUT_VAL 0x00
+#define GPIO_INPUT_EN 0x04
+#define GPIO_OUTPUT_EN 0x08
+#define GPIO_OUTPUT_VAL 0x0C
+#define GPIO_RISE_IE 0x18
+#define GPIO_RISE_IP 0x1C
+#define GPIO_FALL_IE 0x20
+#define GPIO_FALL_IP 0x24
+#define GPIO_HIGH_IE 0x28
+#define GPIO_HIGH_IP 0x2C
+#define GPIO_LOW_IE 0x30
+#define GPIO_LOW_IP 0x34
+#define GPIO_OUTPUT_XOR 0x40
+
+#define NR_GPIOS 16
+
+enum gpio_state {
+ LOW,
+ HIGH
+};
+
+/* Details about a GPIO bank */
+struct sifive_gpio_plat {
+ void *base; /* address of registers in physical memory */
+};
+
+#define SIFIVE_GENERIC_GPIO_NR(port, index) \
+ (((port) * NR_GPIOS) + ((index) & (NR_GPIOS - 1)))
+
+#endif /* _GPIO_SIFIVE_H */
diff --git a/arch/riscv/include/asm/arch-fu740/reset.h b/arch/riscv/include/asm/arch-fu740/reset.h
new file mode 100644
index 0000000..538ef87
--- /dev/null
+++ b/arch/riscv/include/asm/arch-fu740/reset.h
@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) 2020-2021 SiFive, Inc.
+ *
+ * Author: Sagar Kadam <sagar.kadam@sifive.com>
+ */
+
+#ifndef __RESET_SIFIVE_H
+#define __RESET_SIFIVE_H
+
+int sifive_reset_bind(struct udevice *dev, ulong count);
+
+#endif
diff --git a/arch/riscv/include/asm/arch-fu740/spl.h b/arch/riscv/include/asm/arch-fu740/spl.h
new file mode 100644
index 0000000..15ad9e7
--- /dev/null
+++ b/arch/riscv/include/asm/arch-fu740/spl.h
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2020-2021 SiFive, Inc.
+ *
+ * Authors:
+ * Pragnesh Patel <pragnesh.patel@sifve.com>
+ */
+
+#ifndef _SPL_SIFIVE_H
+#define _SPL_SIFIVE_H
+
+int spl_soc_init(void);
+
+#endif /* _SPL_SIFIVE_H */