sunxi: clock: support D1/R528 PLL6 clock
The PLL_PERIPH0 clock changed a bit in the D1/R528/T113s SoCs: there is
new P0 divider at bits [18:16], and the M divider is 1.
Add code to support this version of "PLL6".
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
diff --git a/arch/arm/include/asm/arch-sunxi/clock_sun50i_h6.h b/arch/arm/include/asm/arch-sunxi/clock_sun50i_h6.h
index 9895c2c..8471e11 100644
--- a/arch/arm/include/asm/arch-sunxi/clock_sun50i_h6.h
+++ b/arch/arm/include/asm/arch-sunxi/clock_sun50i_h6.h
@@ -249,6 +249,8 @@
#define CCM_PLL6_CTRL_EN BIT(31)
#define CCM_PLL6_LOCK_EN BIT(29)
#define CCM_PLL6_LOCK BIT(28)
+#define CCM_PLL6_CTRL_P0_SHIFT 16
+#define CCM_PLL6_CTRL_P0_MASK (0x7 << CCM_PLL6_CTRL_P0_SHIFT)
#define CCM_PLL6_CTRL_N_SHIFT 8
#define CCM_PLL6_CTRL_N_MASK (0xff << CCM_PLL6_CTRL_N_SHIFT)
#define CCM_PLL6_CTRL_DIV1_SHIFT 0
diff --git a/arch/arm/mach-sunxi/clock_sun50i_h6.c b/arch/arm/mach-sunxi/clock_sun50i_h6.c
index d32e334..daae994 100644
--- a/arch/arm/mach-sunxi/clock_sun50i_h6.c
+++ b/arch/arm/mach-sunxi/clock_sun50i_h6.c
@@ -110,16 +110,26 @@
{
struct sunxi_ccm_reg *const ccm =
(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
- int m = IS_ENABLED(CONFIG_MACH_SUN50I_H6) ? 4 : 2;
-
uint32_t rval = readl(&ccm->pll6_cfg);
int n = ((rval & CCM_PLL6_CTRL_N_MASK) >> CCM_PLL6_CTRL_N_SHIFT) + 1;
- int div1 = ((rval & CCM_PLL6_CTRL_DIV1_MASK) >>
- CCM_PLL6_CTRL_DIV1_SHIFT) + 1;
int div2 = ((rval & CCM_PLL6_CTRL_DIV2_MASK) >>
- CCM_PLL6_CTRL_DIV2_SHIFT) + 1;
- /* The register defines PLL6-2X or PLL6-4X, not plain PLL6 */
- return 24000000 / m * n / div1 / div2;
+ CCM_PLL6_CTRL_DIV2_SHIFT) + 1;
+ int div1, m;
+
+ if (IS_ENABLED(CONFIG_SUNXI_GEN_NCAT2)) {
+ div1 = ((rval & CCM_PLL6_CTRL_P0_MASK) >>
+ CCM_PLL6_CTRL_P0_SHIFT) + 1;
+ m = 1;
+ } else {
+ div1 = ((rval & CCM_PLL6_CTRL_DIV1_MASK) >>
+ CCM_PLL6_CTRL_DIV1_SHIFT) + 1;
+ if (IS_ENABLED(CONFIG_MACH_SUN50I_H6))
+ m = 4;
+ else
+ m = 2;
+ }
+
+ return 24000000U * n / m / div1 / div2;
}
int clock_twi_onoff(int port, int state)