commit aa0d99fc285a0b4ca71245c0c3ba8c00f8b51983
author Alison Wang <b18965@freescale.com> Mon Mar 26 21:49:05 2012 +0000
committer jason <jason@jason-ThinkPad-T61.(none)> Thu Sep 20 20:39:27 2012 +0800
tree b5d08e72a224b9e7b9768c4f822bb6366f034da7
parent 32dbaafa5a1fda97dbf99e6627309e7570dc14ca

ColdFire: Clean up checkpatch warnings for MCF532x/MCF537x/MCF5301x

Signed-off-by: Alison Wang <b18965@freescale.com>

board/freescale/m5329evb/nand.c

diff --git a/board/freescale/m5329evb/nand.c b/board/freescale/m5329evb/nand.c
index 16025f9..c70c98c 100644
--- a/board/freescale/m5329evb/nand.c
+++ b/board/freescale/m5329evb/nand.c
@@ -2,7 +2,7 @@
  * (C) Copyright 2000-2003
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
+ * Copyright (C) 2004-2007, 2012 Freescale Semiconductor, Inc.
  * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
  *
  * See file CREDITS for list of people who contributed to this
@@ -67,18 +67,18 @@
 
 int board_nand_init(struct nand_chip *nand)
 {
-	volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
+	gpio_t *gpio = (gpio_t *) MMAP_GPIO;
 
 	/*
 	 * set up pin configuration - enabled 2nd output buffer's signals
 	 * (nand_ngpio - nCE USB1/2_PWR_EN, LATCH_GPIOs, LCD_VEEEN, etc)
 	 * to use nCE signal
 	 */
-	gpio->par_timer &= ~GPIO_PAR_TIN3_TIN3;
-	gpio->pddr_timer |= 0x08;
-	gpio->ppd_timer |= 0x08;
-	gpio->pclrr_timer = 0;
-	gpio->podr_timer = 0;
+	clrbits_8(&gpio->par_timer, GPIO_PAR_TIN3_TIN3);
+	setbits_8(&gpio->pddr_timer, 0x08);
+	setbits_8(&gpio->ppd_timer, 0x08);
+	out_8(&gpio->pclrr_timer, 0);
+	out_8(&gpio->podr_timer, 0);
 
 	nand->chip_delay = 60;
 	nand->ecc.mode = NAND_ECC_SOFT;