arm: vexpress: Add a devicetree files for juno

Sync these file, obtained from Linux v5.15.

Add a note for the maintainer, and SPDX lines where they are missing.
The added lines are:

   SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause

Note, this matches the text in those files, but is not the same as the
GPL-2.0 of some files.

[1] https://releases.linaro.org/android/reference-lcr/juno/7.1-17.05/

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 9cddab3..d53bae2 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -1149,7 +1149,10 @@
 dtb-$(CONFIG_TARGET_GE_B1X5V2) += imx6dl-b1x5v2.dtb
 dtb-$(CONFIG_TARGET_MX53PPD) += imx53-ppd.dtb
 
+# TODO(Linus Walleij <linus.walleij@linaro.org>): Should us a single vexpress
+# Kconfig option to build all of these. See examples above.
 dtb-$(CONFIG_TARGET_VEXPRESS_CA9X4) += vexpress-v2p-ca9.dtb
+dtb-$(CONFIG_TARGET_VEXPRESS64_JUNO) += juno-r2.dtb
 
 dtb-$(CONFIG_TARGET_TOTAL_COMPUTE) += total_compute.dtb
 
diff --git a/arch/arm/dts/juno-base.dtsi b/arch/arm/dts/juno-base.dtsi
new file mode 100644
index 0000000..6288e10
--- /dev/null
+++ b/arch/arm/dts/juno-base.dtsi
@@ -0,0 +1,831 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "juno-clocks.dtsi"
+#include "juno-motherboard.dtsi"
+
+/ {
+	/*
+	 *  Devices shared by all Juno boards
+	 */
+
+	memtimer: timer@2a810000 {
+		compatible = "arm,armv7-timer-mem";
+		reg = <0x0 0x2a810000 0x0 0x10000>;
+		clock-frequency = <50000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x0 0x2a820000 0x20000>;
+		status = "disabled";
+		frame@2a830000 {
+			frame-number = <1>;
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x10000 0x10000>;
+		};
+	};
+
+	mailbox: mhu@2b1f0000 {
+		compatible = "arm,mhu", "arm,primecell";
+		reg = <0x0 0x2b1f0000 0x0 0x1000>;
+		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+		#mbox-cells = <1>;
+		clocks = <&soc_refclk100mhz>;
+		clock-names = "apb_pclk";
+	};
+
+	smmu_gpu: iommu@2b400000 {
+		compatible = "arm,mmu-400", "arm,smmu-v1";
+		reg = <0x0 0x2b400000 0x0 0x10000>;
+		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+		#iommu-cells = <1>;
+		#global-interrupts = <1>;
+		power-domains = <&scpi_devpd 1>;
+		dma-coherent;
+		status = "disabled";
+	};
+
+	smmu_pcie: iommu@2b500000 {
+		compatible = "arm,mmu-401", "arm,smmu-v1";
+		reg = <0x0 0x2b500000 0x0 0x10000>;
+		interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+		#iommu-cells = <1>;
+		#global-interrupts = <1>;
+		dma-coherent;
+		status = "disabled";
+	};
+
+	smmu_etr: iommu@2b600000 {
+		compatible = "arm,mmu-401", "arm,smmu-v1";
+		reg = <0x0 0x2b600000 0x0 0x10000>;
+		interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+		#iommu-cells = <1>;
+		#global-interrupts = <1>;
+		dma-coherent;
+		power-domains = <&scpi_devpd 0>;
+	};
+
+	gic: interrupt-controller@2c010000 {
+		compatible = "arm,gic-400", "arm,cortex-a15-gic";
+		reg = <0x0 0x2c010000 0 0x1000>,
+		      <0x0 0x2c02f000 0 0x2000>,
+		      <0x0 0x2c04f000 0 0x2000>,
+		      <0x0 0x2c06f000 0 0x2000>;
+		#address-cells = <1>;
+		#interrupt-cells = <3>;
+		#size-cells = <1>;
+		interrupt-controller;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>;
+		ranges = <0 0 0x2c1c0000 0x40000>;
+
+		v2m_0: v2m@0 {
+			compatible = "arm,gic-v2m-frame";
+			msi-controller;
+			reg = <0 0x10000>;
+		};
+
+		v2m@10000 {
+			compatible = "arm,gic-v2m-frame";
+			msi-controller;
+			reg = <0x10000 0x10000>;
+		};
+
+		v2m@20000 {
+			compatible = "arm,gic-v2m-frame";
+			msi-controller;
+			reg = <0x20000 0x10000>;
+		};
+
+		v2m@30000 {
+			compatible = "arm,gic-v2m-frame";
+			msi-controller;
+			reg = <0x30000 0x10000>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	/*
+	 * Juno TRMs specify the size for these coresight components as 64K.
+	 * The actual size is just 4K though 64K is reserved. Access to the
+	 * unmapped reserved region results in a DECERR response.
+	 */
+	etf@20010000 { /* etf0 */
+		compatible = "arm,coresight-tmc", "arm,primecell";
+		reg = <0 0x20010000 0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+
+		in-ports {
+			port {
+				etf0_in_port: endpoint {
+					remote-endpoint = <&main_funnel_out_port>;
+				};
+			};
+		};
+
+		out-ports {
+			port {
+				etf0_out_port: endpoint {
+				};
+			};
+		};
+	};
+
+	tpiu@20030000 {
+		compatible = "arm,coresight-tpiu", "arm,primecell";
+		reg = <0 0x20030000 0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+		in-ports {
+			port {
+				tpiu_in_port: endpoint {
+					remote-endpoint = <&replicator_out_port0>;
+				};
+			};
+		};
+	};
+
+	/* main funnel on Juno r0, cssys0 funnel on Juno r1/r2 as per TRM*/
+	main_funnel: funnel@20040000 {
+		compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+		reg = <0 0x20040000 0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+
+		out-ports {
+			port {
+				main_funnel_out_port: endpoint {
+					remote-endpoint = <&etf0_in_port>;
+				};
+			};
+		};
+
+		main_funnel_in_ports: in-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				main_funnel_in_port0: endpoint {
+					remote-endpoint = <&cluster0_funnel_out_port>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				main_funnel_in_port1: endpoint {
+					remote-endpoint = <&cluster1_funnel_out_port>;
+				};
+			};
+		};
+	};
+
+	etr@20070000 {
+		compatible = "arm,coresight-tmc", "arm,primecell";
+		reg = <0 0x20070000 0 0x1000>;
+		iommus = <&smmu_etr 0>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+		arm,scatter-gather;
+		in-ports {
+			port {
+				etr_in_port: endpoint {
+					remote-endpoint = <&replicator_out_port1>;
+				};
+			};
+		};
+	};
+
+	stm@20100000 {
+		compatible = "arm,coresight-stm", "arm,primecell";
+		reg = <0 0x20100000 0 0x1000>,
+		      <0 0x28000000 0 0x1000000>;
+		reg-names = "stm-base", "stm-stimulus-base";
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+		out-ports {
+			port {
+				stm_out_port: endpoint {
+				};
+			};
+		};
+	};
+
+	replicator@20120000 {
+		compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
+		reg = <0 0x20120000 0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+
+		out-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* replicator output ports */
+			port@0 {
+				reg = <0>;
+				replicator_out_port0: endpoint {
+					remote-endpoint = <&tpiu_in_port>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				replicator_out_port1: endpoint {
+					remote-endpoint = <&etr_in_port>;
+				};
+			};
+		};
+		in-ports {
+			port {
+				replicator_in_port0: endpoint {
+				};
+			};
+		};
+	};
+
+	cpu_debug0: cpu-debug@22010000 {
+		compatible = "arm,coresight-cpu-debug", "arm,primecell";
+		reg = <0x0 0x22010000 0x0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+	};
+
+	etm0: etm@22040000 {
+		compatible = "arm,coresight-etm4x", "arm,primecell";
+		reg = <0 0x22040000 0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+		out-ports {
+			port {
+				cluster0_etm0_out_port: endpoint {
+					remote-endpoint = <&cluster0_funnel_in_port0>;
+				};
+			};
+		};
+	};
+
+	funnel@220c0000 { /* cluster0 funnel */
+		compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+		reg = <0 0x220c0000 0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+		out-ports {
+			port {
+				cluster0_funnel_out_port: endpoint {
+					remote-endpoint = <&main_funnel_in_port0>;
+				};
+			};
+		};
+
+		in-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				cluster0_funnel_in_port0: endpoint {
+					remote-endpoint = <&cluster0_etm0_out_port>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				cluster0_funnel_in_port1: endpoint {
+					remote-endpoint = <&cluster0_etm1_out_port>;
+				};
+			};
+		};
+	};
+
+	cpu_debug1: cpu-debug@22110000 {
+		compatible = "arm,coresight-cpu-debug", "arm,primecell";
+		reg = <0x0 0x22110000 0x0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+	};
+
+	etm1: etm@22140000 {
+		compatible = "arm,coresight-etm4x", "arm,primecell";
+		reg = <0 0x22140000 0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+		out-ports {
+			port {
+				cluster0_etm1_out_port: endpoint {
+					remote-endpoint = <&cluster0_funnel_in_port1>;
+				};
+			};
+		};
+	};
+
+	cpu_debug2: cpu-debug@23010000 {
+		compatible = "arm,coresight-cpu-debug", "arm,primecell";
+		reg = <0x0 0x23010000 0x0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+	};
+
+	etm2: etm@23040000 {
+		compatible = "arm,coresight-etm4x", "arm,primecell";
+		reg = <0 0x23040000 0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+		out-ports {
+			port {
+				cluster1_etm0_out_port: endpoint {
+					remote-endpoint = <&cluster1_funnel_in_port0>;
+				};
+			};
+		};
+	};
+
+	funnel@230c0000 { /* cluster1 funnel */
+		compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+		reg = <0 0x230c0000 0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+		out-ports {
+			port {
+				cluster1_funnel_out_port: endpoint {
+					remote-endpoint = <&main_funnel_in_port1>;
+				};
+			};
+		};
+
+		in-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				cluster1_funnel_in_port0: endpoint {
+					remote-endpoint = <&cluster1_etm0_out_port>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				cluster1_funnel_in_port1: endpoint {
+					remote-endpoint = <&cluster1_etm1_out_port>;
+				};
+			};
+			port@2 {
+				reg = <2>;
+				cluster1_funnel_in_port2: endpoint {
+					remote-endpoint = <&cluster1_etm2_out_port>;
+				};
+			};
+			port@3 {
+				reg = <3>;
+				cluster1_funnel_in_port3: endpoint {
+					remote-endpoint = <&cluster1_etm3_out_port>;
+				};
+			};
+		};
+	};
+
+	cpu_debug3: cpu-debug@23110000 {
+		compatible = "arm,coresight-cpu-debug", "arm,primecell";
+		reg = <0x0 0x23110000 0x0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+	};
+
+	etm3: etm@23140000 {
+		compatible = "arm,coresight-etm4x", "arm,primecell";
+		reg = <0 0x23140000 0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+		out-ports {
+			port {
+				cluster1_etm1_out_port: endpoint {
+					remote-endpoint = <&cluster1_funnel_in_port1>;
+				};
+			};
+		};
+	};
+
+	cpu_debug4: cpu-debug@23210000 {
+		compatible = "arm,coresight-cpu-debug", "arm,primecell";
+		reg = <0x0 0x23210000 0x0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+	};
+
+	etm4: etm@23240000 {
+		compatible = "arm,coresight-etm4x", "arm,primecell";
+		reg = <0 0x23240000 0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+		out-ports {
+			port {
+				cluster1_etm2_out_port: endpoint {
+					remote-endpoint = <&cluster1_funnel_in_port2>;
+				};
+			};
+		};
+	};
+
+	cpu_debug5: cpu-debug@23310000 {
+		compatible = "arm,coresight-cpu-debug", "arm,primecell";
+		reg = <0x0 0x23310000 0x0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+	};
+
+	etm5: etm@23340000 {
+		compatible = "arm,coresight-etm4x", "arm,primecell";
+		reg = <0 0x23340000 0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+		out-ports {
+			port {
+				cluster1_etm3_out_port: endpoint {
+					remote-endpoint = <&cluster1_funnel_in_port3>;
+				};
+			};
+		};
+	};
+
+	gpu: gpu@2d000000 {
+		compatible = "arm,juno-mali", "arm,mali-t624";
+		reg = <0 0x2d000000 0 0x10000>;
+		interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "job", "mmu", "gpu";
+		clocks = <&scpi_dvfs 2>;
+		power-domains = <&scpi_devpd 1>;
+		dma-coherent;
+		/* The SMMU is only really of interest to bare-metal hypervisors */
+		/* iommus = <&smmu_gpu 0>; */
+		status = "disabled";
+	};
+
+	sram: sram@2e000000 {
+		compatible = "arm,juno-sram-ns", "mmio-sram";
+		reg = <0x0 0x2e000000 0x0 0x8000>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x0 0x2e000000 0x8000>;
+
+		cpu_scp_lpri: scp-sram@0 {
+			compatible = "arm,juno-scp-shmem";
+			reg = <0x0 0x200>;
+		};
+
+		cpu_scp_hpri: scp-sram@200 {
+			compatible = "arm,juno-scp-shmem";
+			reg = <0x200 0x200>;
+		};
+	};
+
+	pcie_ctlr: pcie@40000000 {
+		compatible = "arm,juno-r1-pcie", "plda,xpressrich3-axi", "pci-host-ecam-generic";
+		device_type = "pci";
+		reg = <0 0x40000000 0 0x10000000>;	/* ECAM config space */
+		bus-range = <0 255>;
+		linux,pci-domain = <0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		dma-coherent;
+		ranges = <0x01000000 0x00 0x00000000 0x00 0x5f800000 0x0 0x00800000>,
+			 <0x02000000 0x00 0x50000000 0x00 0x50000000 0x0 0x08000000>,
+			 <0x42000000 0x40 0x00000000 0x40 0x00000000 0x1 0x00000000>;
+		/* Standard AXI Translation entries as programmed by EDK2 */
+		dma-ranges = <0x02000000 0x0 0x2c1c0000 0x0 0x2c1c0000 0x0 0x00040000>,
+			     <0x02000000 0x0 0x80000000 0x0 0x80000000 0x0 0x80000000>,
+			     <0x43000000 0x8 0x00000000 0x8 0x00000000 0x2 0x00000000>;
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &gic 0 GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 2 &gic 0 GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 3 &gic 0 GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 4 &gic 0 GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+		msi-parent = <&v2m_0>;
+		status = "disabled";
+		iommu-map-mask = <0x0>;	/* RC has no means to output PCI RID */
+		iommu-map = <0x0 &smmu_pcie 0x0 0x1>;
+	};
+
+	scpi {
+		compatible = "arm,scpi";
+		mboxes = <&mailbox 1>;
+		shmem = <&cpu_scp_hpri>;
+
+		clocks {
+			compatible = "arm,scpi-clocks";
+
+			scpi_dvfs: clocks-0 {
+				compatible = "arm,scpi-dvfs-clocks";
+				#clock-cells = <1>;
+				clock-indices = <0>, <1>, <2>;
+				clock-output-names = "atlclk", "aplclk","gpuclk";
+			};
+			scpi_clk: clocks-1 {
+				compatible = "arm,scpi-variable-clocks";
+				#clock-cells = <1>;
+				clock-indices = <3>;
+				clock-output-names = "pxlclk";
+			};
+		};
+
+		scpi_devpd: power-controller {
+			compatible = "arm,scpi-power-domains";
+			num-domains = <2>;
+			#power-domain-cells = <1>;
+		};
+
+		scpi_sensors0: sensors {
+			compatible = "arm,scpi-sensors";
+			#thermal-sensor-cells = <1>;
+		};
+	};
+
+	thermal-zones {
+		pmic {
+			polling-delay = <1000>;
+			polling-delay-passive = <100>;
+			thermal-sensors = <&scpi_sensors0 0>;
+		};
+
+		soc {
+			polling-delay = <1000>;
+			polling-delay-passive = <100>;
+			thermal-sensors = <&scpi_sensors0 3>;
+		};
+
+		big_cluster_thermal_zone: big-cluster {
+			polling-delay = <1000>;
+			polling-delay-passive = <100>;
+			thermal-sensors = <&scpi_sensors0 21>;
+			status = "disabled";
+		};
+
+		little_cluster_thermal_zone: little-cluster {
+			polling-delay = <1000>;
+			polling-delay-passive = <100>;
+			thermal-sensors = <&scpi_sensors0 22>;
+			status = "disabled";
+		};
+
+		gpu0_thermal_zone: gpu0 {
+			polling-delay = <1000>;
+			polling-delay-passive = <100>;
+			thermal-sensors = <&scpi_sensors0 23>;
+			status = "disabled";
+		};
+
+		gpu1_thermal_zone: gpu1 {
+			polling-delay = <1000>;
+			polling-delay-passive = <100>;
+			thermal-sensors = <&scpi_sensors0 24>;
+			status = "disabled";
+		};
+	};
+
+	smmu_dma: iommu@7fb00000 {
+		compatible = "arm,mmu-401", "arm,smmu-v1";
+		reg = <0x0 0x7fb00000 0x0 0x10000>;
+		interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+		#iommu-cells = <1>;
+		#global-interrupts = <1>;
+		dma-coherent;
+	};
+
+	smmu_hdlcd1: iommu@7fb10000 {
+		compatible = "arm,mmu-401", "arm,smmu-v1";
+		reg = <0x0 0x7fb10000 0x0 0x10000>;
+		interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+		#iommu-cells = <1>;
+		#global-interrupts = <1>;
+	};
+
+	smmu_hdlcd0: iommu@7fb20000 {
+		compatible = "arm,mmu-401", "arm,smmu-v1";
+		reg = <0x0 0x7fb20000 0x0 0x10000>;
+		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+		#iommu-cells = <1>;
+		#global-interrupts = <1>;
+	};
+
+	smmu_usb: iommu@7fb30000 {
+		compatible = "arm,mmu-401", "arm,smmu-v1";
+		reg = <0x0 0x7fb30000 0x0 0x10000>;
+		interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+		#iommu-cells = <1>;
+		#global-interrupts = <1>;
+		dma-coherent;
+	};
+
+	dma@7ff00000 {
+		compatible = "arm,pl330", "arm,primecell";
+		reg = <0x0 0x7ff00000 0 0x1000>;
+		#dma-cells = <1>;
+		#dma-channels = <8>;
+		#dma-requests = <32>;
+		interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+		iommus = <&smmu_dma 0>,
+			 <&smmu_dma 1>,
+			 <&smmu_dma 2>,
+			 <&smmu_dma 3>,
+			 <&smmu_dma 4>,
+			 <&smmu_dma 5>,
+			 <&smmu_dma 6>,
+			 <&smmu_dma 7>,
+			 <&smmu_dma 8>;
+		clocks = <&soc_faxiclk>;
+		clock-names = "apb_pclk";
+	};
+
+	hdlcd@7ff50000 {
+		compatible = "arm,hdlcd";
+		reg = <0 0x7ff50000 0 0x1000>;
+		interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+		iommus = <&smmu_hdlcd1 0>;
+		clocks = <&scpi_clk 3>;
+		clock-names = "pxlclk";
+
+		port {
+			hdlcd1_output: endpoint {
+				remote-endpoint = <&tda998x_1_input>;
+			};
+		};
+	};
+
+	hdlcd@7ff60000 {
+		compatible = "arm,hdlcd";
+		reg = <0 0x7ff60000 0 0x1000>;
+		interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+		iommus = <&smmu_hdlcd0 0>;
+		clocks = <&scpi_clk 3>;
+		clock-names = "pxlclk";
+
+		port {
+			hdlcd0_output: endpoint {
+				remote-endpoint = <&tda998x_0_input>;
+			};
+		};
+	};
+
+	soc_uart0: serial@7ff80000 {
+		compatible = "arm,pl011", "arm,primecell";
+		reg = <0x0 0x7ff80000 0x0 0x1000>;
+		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&soc_uartclk>, <&soc_refclk100mhz>;
+		clock-names = "uartclk", "apb_pclk";
+	};
+
+	i2c@7ffa0000 {
+		compatible = "snps,designware-i2c";
+		reg = <0x0 0x7ffa0000 0x0 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <400000>;
+		i2c-sda-hold-time-ns = <500>;
+		clocks = <&soc_smc50mhz>;
+
+		hdmi-transmitter@70 {
+			compatible = "nxp,tda998x";
+			reg = <0x70>;
+			port {
+				tda998x_0_input: endpoint {
+					remote-endpoint = <&hdlcd0_output>;
+				};
+			};
+		};
+
+		hdmi-transmitter@71 {
+			compatible = "nxp,tda998x";
+			reg = <0x71>;
+			port {
+				tda998x_1_input: endpoint {
+					remote-endpoint = <&hdlcd1_output>;
+				};
+			};
+		};
+	};
+
+	usb@7ffb0000 {
+		compatible = "generic-ohci";
+		reg = <0x0 0x7ffb0000 0x0 0x10000>;
+		interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+		iommus = <&smmu_usb 0>;
+		clocks = <&soc_usb48mhz>;
+	};
+
+	usb@7ffc0000 {
+		compatible = "generic-ehci";
+		reg = <0x0 0x7ffc0000 0x0 0x10000>;
+		interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+		iommus = <&smmu_usb 0>;
+		clocks = <&soc_usb48mhz>;
+	};
+
+	memory-controller@7ffd0000 {
+		compatible = "arm,pl354", "arm,primecell";
+		reg = <0 0x7ffd0000 0 0x1000>;
+		interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* last 16MB of the first memory area is reserved for secure world use by firmware */
+		reg = <0x00000000 0x80000000 0x0 0x7f000000>,
+		      <0x00000008 0x80000000 0x1 0x80000000>;
+	};
+
+	bus@8000000 {
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 15>;
+		interrupt-map = <0 0  0 &gic 0 GIC_SPI  68 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  1 &gic 0 GIC_SPI  69 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  2 &gic 0 GIC_SPI  70 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  3 &gic 0 GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  4 &gic 0 GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  5 &gic 0 GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  6 &gic 0 GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  7 &gic 0 GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  8 &gic 0 GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  9 &gic 0 GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 10 &gic 0 GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 11 &gic 0 GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 12 &gic 0 GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	site2: tlx-bus@60000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0x60000000 0x10000000>;
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0>;
+		interrupt-map = <0 0 &gic 0 GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
diff --git a/arch/arm/dts/juno-clocks.dtsi b/arch/arm/dts/juno-clocks.dtsi
new file mode 100644
index 0000000..b0f8cca
--- /dev/null
+++ b/arch/arm/dts/juno-clocks.dtsi
@@ -0,0 +1,46 @@
+// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+/*
+ * ARM Juno Platform clocks
+ *
+ * Copyright (c) 2013-2014 ARM Ltd
+ *
+ * This file is licensed under a dual GPLv2 or BSD license.
+ *
+ */
+/ {
+	/* SoC fixed clocks */
+	soc_uartclk: refclk7372800hz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <7372800>;
+		clock-output-names = "juno:uartclk";
+	};
+
+	soc_usb48mhz: clk48mhz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <48000000>;
+		clock-output-names = "clk48mhz";
+	};
+
+	soc_smc50mhz: clk50mhz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <50000000>;
+		clock-output-names = "smc_clk";
+	};
+
+	soc_refclk100mhz: refclk100mhz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+		clock-output-names = "apb_pclk";
+	};
+
+	soc_faxiclk: refclk400mhz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <400000000>;
+		clock-output-names = "faxi_clk";
+	};
+};
diff --git a/arch/arm/dts/juno-cs-r1r2.dtsi b/arch/arm/dts/juno-cs-r1r2.dtsi
new file mode 100644
index 0000000..eda3d9e
--- /dev/null
+++ b/arch/arm/dts/juno-cs-r1r2.dtsi
@@ -0,0 +1,85 @@
+// SPDX-License-Identifier: GPL-2.0
+/ {
+	funnel@20130000 { /* cssys1 */
+		compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+		reg = <0 0x20130000 0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+		out-ports {
+			port {
+				csys1_funnel_out_port: endpoint {
+					remote-endpoint = <&etf1_in_port>;
+				};
+			};
+		};
+		in-ports {
+			port {
+				csys1_funnel_in_port0: endpoint {
+				};
+			};
+
+		};
+	};
+
+	etf@20140000 { /* etf1 */
+		compatible = "arm,coresight-tmc", "arm,primecell";
+		reg = <0 0x20140000 0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+		in-ports {
+			port {
+				etf1_in_port: endpoint {
+					remote-endpoint = <&csys1_funnel_out_port>;
+				};
+			};
+		};
+		out-ports {
+			port {
+				etf1_out_port: endpoint {
+					remote-endpoint = <&csys2_funnel_in_port1>;
+				};
+			};
+		};
+	};
+
+	funnel@20150000 { /* cssys2 */
+		compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+		reg = <0 0x20150000 0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+		out-ports {
+			port {
+				csys2_funnel_out_port: endpoint {
+					remote-endpoint = <&replicator_in_port0>;
+				};
+			};
+		};
+
+		in-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			port@0 {
+				reg = <0>;
+				csys2_funnel_in_port0: endpoint {
+					slave-mode;
+					remote-endpoint = <&etf0_out_port>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				csys2_funnel_in_port1: endpoint {
+					slave-mode;
+					remote-endpoint = <&etf1_out_port>;
+				};
+			};
+
+		};
+	};
+};
diff --git a/arch/arm/dts/juno-motherboard.dtsi b/arch/arm/dts/juno-motherboard.dtsi
new file mode 100644
index 0000000..42b1754
--- /dev/null
+++ b/arch/arm/dts/juno-motherboard.dtsi
@@ -0,0 +1,303 @@
+// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+/*
+ * ARM Juno Platform motherboard peripherals
+ *
+ * Copyright (c) 2013-2014 ARM Ltd
+ *
+ * This file is licensed under a dual GPLv2 or BSD license.
+ *
+ */
+
+/ {
+	mb_clk24mhz: clk24mhz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "juno_mb:clk24mhz";
+	};
+
+	mb_clk25mhz: clk25mhz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+		clock-output-names = "juno_mb:clk25mhz";
+	};
+
+	v2m_refclk1mhz: refclk1mhz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <1000000>;
+		clock-output-names = "juno_mb:refclk1mhz";
+	};
+
+	v2m_refclk32khz: refclk32khz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "juno_mb:refclk32khz";
+	};
+
+	mb_fixed_3v3: mcc-sb-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "MCC_SB_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		power-button {
+			debounce-interval = <50>;
+			wakeup-source;
+			linux,code = <116>;
+			label = "POWER";
+			gpios = <&iofpga_gpio0 0 0x4>;
+		};
+		home-button {
+			debounce-interval = <50>;
+			wakeup-source;
+			linux,code = <102>;
+			label = "HOME";
+			gpios = <&iofpga_gpio0 1 0x4>;
+		};
+		rlock-button {
+			debounce-interval = <50>;
+			wakeup-source;
+			linux,code = <152>;
+			label = "RLOCK";
+			gpios = <&iofpga_gpio0 2 0x4>;
+		};
+		vol-up-button {
+			debounce-interval = <50>;
+			wakeup-source;
+			linux,code = <115>;
+			label = "VOL+";
+			gpios = <&iofpga_gpio0 3 0x4>;
+		};
+		vol-down-button {
+			debounce-interval = <50>;
+			wakeup-source;
+			linux,code = <114>;
+			label = "VOL-";
+			gpios = <&iofpga_gpio0 4 0x4>;
+		};
+		nmi-button {
+			debounce-interval = <50>;
+			wakeup-source;
+			linux,code = <99>;
+			label = "NMI";
+			gpios = <&iofpga_gpio0 5 0x4>;
+		};
+	};
+
+	bus@8000000 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <0 0x8000000 0 0x8000000 0x18000000>;
+
+		motherboard-bus@8000000 {
+			compatible = "arm,vexpress,v2p-p1", "simple-bus";
+			#address-cells = <2>;  /* SMB chipselect number and offset */
+			#size-cells = <1>;
+			ranges = <0 0 0 0x08000000 0x04000000>,
+				 <1 0 0 0x14000000 0x04000000>,
+				 <2 0 0 0x18000000 0x04000000>,
+				 <3 0 0 0x1c000000 0x04000000>,
+				 <4 0 0 0x0c000000 0x04000000>,
+				 <5 0 0 0x10000000 0x04000000>;
+			arm,hbi = <0x252>;
+			arm,vexpress,site = <0>;
+
+			flash@0 {
+				/* 2 * 32MiB NOR Flash memory mounted on CS0 */
+				compatible = "arm,vexpress-flash", "cfi-flash";
+				reg = <0 0x00000000 0x04000000>;
+				bank-width = <4>;
+				/*
+				 * Unfortunately, accessing the flash disturbs
+				 * the CPU idle states (suspend) and CPU
+				 * hotplug of the platform. For this reason,
+				 * flash hardware access is disabled by default.
+				 */
+				status = "disabled";
+				partitions {
+					compatible = "arm,arm-firmware-suite";
+				};
+			};
+
+			ethernet@200000000 {
+				compatible = "smsc,lan9118", "smsc,lan9115";
+				reg = <2 0x00000000 0x10000>;
+				interrupts = <3>;
+				phy-mode = "mii";
+				reg-io-width = <4>;
+				smsc,irq-active-high;
+				smsc,irq-push-pull;
+				clocks = <&mb_clk25mhz>;
+				vdd33a-supply = <&mb_fixed_3v3>;
+				vddvario-supply = <&mb_fixed_3v3>;
+			};
+
+			iofpga-bus@300000000 {
+				compatible = "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 3 0 0x200000>;
+
+				v2m_sysctl: sysctl@20000 {
+					compatible = "arm,sp810", "arm,primecell";
+					reg = <0x020000 0x1000>;
+					clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&mb_clk24mhz>;
+					clock-names = "refclk", "timclk", "apb_pclk";
+					#clock-cells = <1>;
+					clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
+					assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_sysctl 3>, <&v2m_sysctl 3>;
+					assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>;
+				};
+
+				apbregs@10000 {
+					compatible = "syscon", "simple-mfd";
+					reg = <0x010000 0x1000>;
+
+					led0 {
+						compatible = "register-bit-led";
+						offset = <0x08>;
+						mask = <0x01>;
+						label = "vexpress:0";
+						linux,default-trigger = "heartbeat";
+						default-state = "on";
+					};
+					led1 {
+						compatible = "register-bit-led";
+						offset = <0x08>;
+						mask = <0x02>;
+						label = "vexpress:1";
+						linux,default-trigger = "mmc0";
+						default-state = "off";
+					};
+					led2 {
+						compatible = "register-bit-led";
+						offset = <0x08>;
+						mask = <0x04>;
+						label = "vexpress:2";
+						linux,default-trigger = "cpu0";
+						default-state = "off";
+					};
+					led3 {
+						compatible = "register-bit-led";
+						offset = <0x08>;
+						mask = <0x08>;
+						label = "vexpress:3";
+						linux,default-trigger = "cpu1";
+						default-state = "off";
+					};
+					led4 {
+						compatible = "register-bit-led";
+						offset = <0x08>;
+						mask = <0x10>;
+						label = "vexpress:4";
+						linux,default-trigger = "cpu2";
+						default-state = "off";
+					};
+					led5 {
+						compatible = "register-bit-led";
+						offset = <0x08>;
+						mask = <0x20>;
+						label = "vexpress:5";
+						linux,default-trigger = "cpu3";
+						default-state = "off";
+					};
+					led6 {
+						compatible = "register-bit-led";
+						offset = <0x08>;
+						mask = <0x40>;
+						label = "vexpress:6";
+						default-state = "off";
+					};
+					led7 {
+						compatible = "register-bit-led";
+						offset = <0x08>;
+						mask = <0x80>;
+						label = "vexpress:7";
+						default-state = "off";
+					};
+				};
+
+				mmc@50000 {
+					compatible = "arm,pl180", "arm,primecell";
+					reg = <0x050000 0x1000>;
+					interrupts = <5>;
+					/* cd-gpios = <&v2m_mmc_gpios 0 0>;
+					wp-gpios = <&v2m_mmc_gpios 1 0>; */
+					max-frequency = <12000000>;
+					vmmc-supply = <&mb_fixed_3v3>;
+					clocks = <&mb_clk24mhz>, <&soc_smc50mhz>;
+					clock-names = "mclk", "apb_pclk";
+				};
+
+				kmi@60000 {
+					compatible = "arm,pl050", "arm,primecell";
+					reg = <0x060000 0x1000>;
+					interrupts = <8>;
+					clocks = <&mb_clk24mhz>, <&soc_smc50mhz>;
+					clock-names = "KMIREFCLK", "apb_pclk";
+				};
+
+				kmi@70000 {
+					compatible = "arm,pl050", "arm,primecell";
+					reg = <0x070000 0x1000>;
+					interrupts = <8>;
+					clocks = <&mb_clk24mhz>, <&soc_smc50mhz>;
+					clock-names = "KMIREFCLK", "apb_pclk";
+				};
+
+				watchdog@f0000 {
+					compatible = "arm,sp805", "arm,primecell";
+					reg = <0x0f0000 0x10000>;
+					interrupts = <7>;
+					clocks = <&mb_clk24mhz>, <&soc_smc50mhz>;
+					clock-names = "wdog_clk", "apb_pclk";
+				};
+
+				v2m_timer01: timer@110000 {
+					compatible = "arm,sp804", "arm,primecell";
+					reg = <0x110000 0x10000>;
+					interrupts = <9>;
+					clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&mb_clk24mhz>;
+					clock-names = "timclken1", "timclken2", "apb_pclk";
+				};
+
+				v2m_timer23: timer@120000 {
+					compatible = "arm,sp804", "arm,primecell";
+					reg = <0x120000 0x10000>;
+					interrupts = <9>;
+					clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&mb_clk24mhz>;
+					clock-names = "timclken1", "timclken2", "apb_pclk";
+				};
+
+				rtc@170000 {
+					compatible = "arm,pl031", "arm,primecell";
+					reg = <0x170000 0x10000>;
+					interrupts = <0>;
+					clocks = <&soc_smc50mhz>;
+					clock-names = "apb_pclk";
+				};
+
+				iofpga_gpio0: gpio@1d0000 {
+					compatible = "arm,pl061", "arm,primecell";
+					reg = <0x1d0000 0x1000>;
+					interrupts = <6>;
+					clocks = <&soc_smc50mhz>;
+					clock-names = "apb_pclk";
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/dts/juno-r2-u-boot.dtsi b/arch/arm/dts/juno-r2-u-boot.dtsi
new file mode 100644
index 0000000..7279066
--- /dev/null
+++ b/arch/arm/dts/juno-r2-u-boot.dtsi
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+/*
+ * ARM Juno Platform additions for U-Boot
+ */
+
+/ {
+	bus@8000000 {
+		motherboard-bus@8000000 {
+			/*
+			 * This should not be marked "disabled" in U-Boot. The
+			 * boot loader is not using some CPU idle states and
+			 * hotplug but may be very interested in accessing the
+			 * flash.
+			 */
+			flash@0 {
+				status = "okay";
+			};
+		};
+	};
+};
diff --git a/arch/arm/dts/juno-r2.dts b/arch/arm/dts/juno-r2.dts
new file mode 100644
index 0000000..52a6517
--- /dev/null
+++ b/arch/arm/dts/juno-r2.dts
@@ -0,0 +1,322 @@
+// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+/*
+ * ARM Ltd. Juno Platform
+ *
+ * Copyright (c) 2015 ARM Ltd.
+ *
+ * This file is licensed under a dual GPLv2 or BSD license.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "juno-base.dtsi"
+#include "juno-cs-r1r2.dtsi"
+
+/ {
+	model = "ARM Juno development board (r2)";
+	compatible = "arm,juno-r2", "arm,juno", "arm,vexpress";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &soc_uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&A72_0>;
+				};
+				core1 {
+					cpu = <&A72_1>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&A53_0>;
+				};
+				core1 {
+					cpu = <&A53_1>;
+				};
+				core2 {
+					cpu = <&A53_2>;
+				};
+				core3 {
+					cpu = <&A53_3>;
+				};
+			};
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			CPU_SLEEP_0: cpu-sleep-0 {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x0010000>;
+				local-timer-stop;
+				entry-latency-us = <300>;
+				exit-latency-us = <1200>;
+				min-residency-us = <2000>;
+			};
+
+			CLUSTER_SLEEP_0: cluster-sleep-0 {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x1010000>;
+				local-timer-stop;
+				entry-latency-us = <400>;
+				exit-latency-us = <1200>;
+				min-residency-us = <2500>;
+			};
+		};
+
+		A72_0: cpu@0 {
+			compatible = "arm,cortex-a72";
+			reg = <0x0 0x0>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&A72_L2>;
+			clocks = <&scpi_dvfs 0>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <450>;
+		};
+
+		A72_1: cpu@1 {
+			compatible = "arm,cortex-a72";
+			reg = <0x0 0x1>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&A72_L2>;
+			clocks = <&scpi_dvfs 0>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <450>;
+		};
+
+		A53_0: cpu@100 {
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x100>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&A53_L2>;
+			clocks = <&scpi_dvfs 1>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+			capacity-dmips-mhz = <485>;
+			dynamic-power-coefficient = <140>;
+		};
+
+		A53_1: cpu@101 {
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x101>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&A53_L2>;
+			clocks = <&scpi_dvfs 1>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+			capacity-dmips-mhz = <485>;
+			dynamic-power-coefficient = <140>;
+		};
+
+		A53_2: cpu@102 {
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x102>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&A53_L2>;
+			clocks = <&scpi_dvfs 1>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+			capacity-dmips-mhz = <485>;
+			dynamic-power-coefficient = <140>;
+		};
+
+		A53_3: cpu@103 {
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x103>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&A53_L2>;
+			clocks = <&scpi_dvfs 1>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+			capacity-dmips-mhz = <485>;
+			dynamic-power-coefficient = <140>;
+		};
+
+		A72_L2: l2-cache0 {
+			compatible = "cache";
+			cache-size = <0x200000>;
+			cache-line-size = <64>;
+			cache-sets = <2048>;
+		};
+
+		A53_L2: l2-cache1 {
+			compatible = "cache";
+			cache-size = <0x100000>;
+			cache-line-size = <64>;
+			cache-sets = <1024>;
+		};
+	};
+
+	pmu-a72 {
+		compatible = "arm,cortex-a72-pmu";
+		interrupts = <GIC_SPI 02 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 06 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&A72_0>,
+				     <&A72_1>;
+	};
+
+	pmu-a53 {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&A53_0>,
+				     <&A53_1>,
+				     <&A53_2>,
+				     <&A53_3>;
+	};
+};
+
+&memtimer {
+	status = "okay";
+};
+
+&pcie_ctlr {
+	status = "okay";
+};
+
+&smmu_pcie {
+	status = "okay";
+};
+
+&etm0 {
+	cpu = <&A72_0>;
+};
+
+&etm1 {
+	cpu = <&A72_1>;
+};
+
+&etm2 {
+	cpu = <&A53_0>;
+};
+
+&etm3 {
+	cpu = <&A53_1>;
+};
+
+&etm4 {
+	cpu = <&A53_2>;
+};
+
+&etm5 {
+	cpu = <&A53_3>;
+};
+
+&big_cluster_thermal_zone {
+	status = "okay";
+};
+
+&little_cluster_thermal_zone {
+	status = "okay";
+};
+
+&gpu0_thermal_zone {
+	status = "okay";
+};
+
+&gpu1_thermal_zone {
+	status = "okay";
+};
+
+&etf0_out_port {
+	remote-endpoint = <&csys2_funnel_in_port0>;
+};
+
+&replicator_in_port0 {
+	remote-endpoint = <&csys2_funnel_out_port>;
+};
+
+&csys1_funnel_in_port0 {
+	remote-endpoint = <&stm_out_port>;
+};
+
+&stm_out_port {
+	remote-endpoint = <&csys1_funnel_in_port0>;
+};
+
+&cpu_debug0 {
+	cpu = <&A72_0>;
+};
+
+&cpu_debug1 {
+	cpu = <&A72_1>;
+};
+
+&cpu_debug2 {
+	cpu = <&A53_0>;
+};
+
+&cpu_debug3 {
+	cpu = <&A53_1>;
+};
+
+&cpu_debug4 {
+	cpu = <&A53_2>;
+};
+
+&cpu_debug5 {
+	cpu = <&A53_3>;
+};