dm: usb: exynos: Add driver model support to exynos EHCI
Update this driver with driver model support for USB.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Marek Vasut <marex@denx.de>
diff --git a/drivers/usb/host/ehci-exynos.c b/drivers/usb/host/ehci-exynos.c
index f3c077d..86cf631 100644
--- a/drivers/usb/host/ehci-exynos.c
+++ b/drivers/usb/host/ehci-exynos.c
@@ -8,6 +8,7 @@
*/
#include <common.h>
+#include <dm.h>
#include <fdtdec.h>
#include <libfdt.h>
#include <malloc.h>
@@ -24,19 +25,73 @@
/* Declare global data pointer */
DECLARE_GLOBAL_DATA_PTR;
+#ifdef CONFIG_DM_USB
+struct exynos_ehci_platdata {
+ struct usb_platdata usb_plat;
+ fdt_addr_t hcd_base;
+ fdt_addr_t phy_base;
+ struct gpio_desc vbus_gpio;
+};
+#endif
+
/**
* Contains pointers to register base addresses
* for the usb controller.
*/
struct exynos_ehci {
+ struct ehci_ctrl ctrl;
struct exynos_usb_phy *usb;
struct ehci_hccr *hcd;
+#ifndef CONFIG_DM_USB
struct gpio_desc vbus_gpio;
+#endif
};
+#ifndef CONFIG_DM_USB
static struct exynos_ehci exynos;
+#endif
-#ifdef CONFIG_OF_CONTROL
+#ifdef CONFIG_DM_USB
+static int ehci_usb_ofdata_to_platdata(struct udevice *dev)
+{
+ struct exynos_ehci_platdata *plat = dev_get_platdata(dev);
+ const void *blob = gd->fdt_blob;
+ unsigned int node;
+ int depth;
+
+ /*
+ * Get the base address for XHCI controller from the device node
+ */
+ plat->hcd_base = dev_get_addr(dev);
+ if (plat->hcd_base == FDT_ADDR_T_NONE) {
+ debug("Can't get the XHCI register base address\n");
+ return -ENXIO;
+ }
+
+ depth = 0;
+ node = fdtdec_next_compatible_subnode(blob, dev->of_offset,
+ COMPAT_SAMSUNG_EXYNOS_USB_PHY, &depth);
+ if (node <= 0) {
+ debug("XHCI: Can't get device node for usb3-phy controller\n");
+ return -ENODEV;
+ }
+
+ /*
+ * Get the base address for usbphy from the device node
+ */
+ plat->phy_base = fdtdec_get_addr(blob, node, "reg");
+ if (plat->phy_base == FDT_ADDR_T_NONE) {
+ debug("Can't get the usbphy register address\n");
+ return -ENXIO;
+ }
+
+ /* Vbus gpio */
+ gpio_request_by_name(dev, "samsung,vbus-gpio", 0,
+ &plat->vbus_gpio, GPIOD_IS_OUT);
+
+ return 0;
+}
+#else
static int exynos_usb_parse_dt(const void *blob, struct exynos_ehci *exynos)
{
fdt_addr_t addr;
@@ -215,6 +270,7 @@
set_usbhost_phy_ctrl(POWER_USB_HOST_PHY_CTRL_DISABLE);
}
+#ifndef CONFIG_DM_USB
/*
* EHCI-initialization
* Create the appropriate control structures to manage
@@ -268,3 +324,57 @@
return 0;
}
+#endif
+
+#ifdef CONFIG_DM_USB
+static int ehci_usb_probe(struct udevice *dev)
+{
+ struct exynos_ehci_platdata *plat = dev_get_platdata(dev);
+ struct exynos_ehci *ctx = dev_get_priv(dev);
+ struct ehci_hcor *hcor;
+
+ ctx->hcd = (struct ehci_hccr *)plat->hcd_base;
+ ctx->usb = (struct exynos_usb_phy *)plat->phy_base;
+ hcor = (struct ehci_hcor *)((uint32_t)ctx->hcd +
+ HC_LENGTH(ehci_readl(&ctx->hcd->cr_capbase)));
+
+ /* setup the Vbus gpio here */
+ if (dm_gpio_is_valid(&plat->vbus_gpio))
+ dm_gpio_set_value(&plat->vbus_gpio, 1);
+
+ setup_usb_phy(ctx->usb);
+
+ return ehci_register(dev, ctx->hcd, hcor, NULL, 0, USB_INIT_HOST);
+}
+
+static int ehci_usb_remove(struct udevice *dev)
+{
+ struct exynos_ehci *ctx = dev_get_priv(dev);
+ int ret;
+
+ ret = ehci_deregister(dev);
+ if (ret)
+ return ret;
+ reset_usb_phy(ctx->usb);
+
+ return 0;
+}
+
+static const struct udevice_id ehci_usb_ids[] = {
+ { .compatible = "samsung,exynos-ehci" },
+ { }
+};
+
+U_BOOT_DRIVER(usb_ehci) = {
+ .name = "ehci_exynos",
+ .id = UCLASS_USB,
+ .of_match = ehci_usb_ids,
+ .ofdata_to_platdata = ehci_usb_ofdata_to_platdata,
+ .probe = ehci_usb_probe,
+ .remove = ehci_usb_remove,
+ .ops = &ehci_usb_ops,
+ .priv_auto_alloc_size = sizeof(struct exynos_ehci),
+ .platdata_auto_alloc_size = sizeof(struct exynos_ehci_platdata),
+ .flags = DM_FLAG_ALLOC_PRIV_DMA,
+};
+#endif