Merge https://source.denx.de/u-boot/custodians/u-boot-marvell

- i2c-gpio: Correctly handle new {sda, scl}-gpios bindings (Chris)
- mvebu: x240: Use i2c-gpio instead of built in controller (Chris)
diff --git a/arch/arm/dts/ac5-98dx35xx-atl-x240.dts b/arch/arm/dts/ac5-98dx35xx-atl-x240.dts
index 820ec18..c19b259 100644
--- a/arch/arm/dts/ac5-98dx35xx-atl-x240.dts
+++ b/arch/arm/dts/ac5-98dx35xx-atl-x240.dts
@@ -16,7 +16,7 @@
 		gpio0 = &gpio0;
 		gpio1 = &gpio1;
 		spi0 = &spi0;
-		i2c0 = &i2c0;
+		i2c0 = &i2cgpio;
 		usb0 = &usb0;
 		pinctrl0 = &pinctrl0;
 	};
@@ -40,6 +40,19 @@
 			default-state = "on";
 		};
 	};
+
+	i2cgpio: i2c-gpio-0 {
+			compatible = "i2c-gpio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pinctrl-names = "default";
+			pinctrl-0 =  <&i2c0_gpio>;
+			scl-gpios = <&gpio0 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+			sda-gpios = <&gpio0 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+			i2c-gpio,delay-us = <2>;
+			status = "okay";
+		 };
 };
 
 &nand {
@@ -70,9 +83,7 @@
 	status = "okay";
 };
 
-&i2c0 {
-	status = "okay";
-
+&i2cgpio {
 	mux@71 {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -177,8 +188,8 @@
 	 * LED_OE_N              [23]
 	 * USB_PWR_FLT_N         [24]
 	 * SFP_INT_N             [25]
-	 * I2C0_SCL              [26]
-	 * I2C0_SDA              [27]
+	 * I2C0_SCL              [26] (GPIO)
+	 * I2C0_SDA              [27] (GPIO)
 	 * USB_EN                [28]
 	 * MONITOR_INT_N         [29]
 	 * XM1_MDC               [30]
@@ -201,7 +212,7 @@
 	/*	     0    1    2    3    4    5    6    7    8    9 */
 	pin-func = < 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
 		     0xff 0xff 1    1    1    1    0xff 0xff 0    0
-		     0    0    0    0    0    0    1    1    0    0
+		     0    0    0    0    0    0    0xff 0xff 0    0
 		     1    1    1    1    0    0    0    0    0    0
 		     0    0    0    1    1    1    >;
 
@@ -209,4 +220,9 @@
 		marvell,pins = <0 1 2 3 4 5 6 7 8 9 10 11 16 17>;
 		marvell,function = <2>;
 	};
+
+	i2c0_gpio: i2c0-gpio-pins {
+		marvell,pins = <26 27>;
+		marvell,function = <0>;
+	};
 };
diff --git a/configs/x240_defconfig b/configs/x240_defconfig
index a78cb3c..7d2b860 100644
--- a/configs/x240_defconfig
+++ b/configs/x240_defconfig
@@ -42,6 +42,7 @@
 CONFIG_GPIO_HOG=y
 CONFIG_DM_PCA953X=y
 CONFIG_DM_I2C=y
+CONFIG_DM_I2C_GPIO=y
 CONFIG_SYS_I2C_MVTWSI=y
 CONFIG_I2C_MUX=y
 CONFIG_I2C_MUX_PCA954x=y
diff --git a/drivers/i2c/i2c-gpio.c b/drivers/i2c/i2c-gpio.c
index 4ed9e9e..c1fc290 100644
--- a/drivers/i2c/i2c-gpio.c
+++ b/drivers/i2c/i2c-gpio.c
@@ -339,7 +339,7 @@
 	/* "gpios" is deprecated and replaced by "sda-gpios" + "scl-gpios". */
 	ret = gpio_request_list_by_name(dev, "gpios", bus->gpios,
 					ARRAY_SIZE(bus->gpios), 0);
-	if (ret == -ENOENT) {
+	if (ret == 0) {
 		ret = gpio_request_by_name(dev, "sda-gpios", 0,
 					   &bus->gpios[PIN_SDA], 0);
 		if (ret < 0)