* Patch by Stephan Linz, 09 Mar 2004
- Add support for the SSV ADNP/ESC1 (Nios Softcore)
* Patch by George G. Davis, 9 Mar 2004:
fix recent build failure for SA1100 target
* Patch by Travis Sawyer, 09 Mar 2004:
Support native interrupt mode for the IBM440GX.
Previously it was running in 440GP compatibility mode.
diff --git a/board/ssv/common/cmd_sled.c b/board/ssv/common/cmd_sled.c
new file mode 100644
index 0000000..6ca054c
--- /dev/null
+++ b/board/ssv/common/cmd_sled.c
@@ -0,0 +1,162 @@
+/*
+ * (C) Copyright 2004, Li-Pro.Net <www.li-pro.net>
+ * Stephan Linz <linz@li-pro.net>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <status_led.h>
+
+#if defined(CONFIG_STATUS_LED)
+
+/* !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
+ * !!!!! Q u i c k & D i r t y H a c k !!!!!
+ * !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
+ * !!!!! !!!!!
+ * !!!!! Next type definition was coming from original !!!!!
+ * !!!!! status LED driver drivers/status_led.c and !!!!!
+ * !!!!! should exported for using here. !!!!!
+ * !!!!! !!!!!
+ * !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! */
+
+typedef struct {
+ led_id_t mask;
+ int state;
+ int period;
+ int cnt;
+} led_dev_t;
+
+extern led_dev_t led_dev[];
+
+#if (CONFIG_COMMANDS & CFG_CMD_BSP)
+int do_sled (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+{
+ int led_id = 0;
+
+ if (argc > 1) {
+#ifdef STATUS_LED_BOOT
+ if (!strcmp (argv[1], "boot")) {
+ led_id = STATUS_LED_BOOT + 1;
+ }
+#endif
+#ifdef STATUS_LED_RED
+ if (!strcmp (argv[1], "red")) {
+ led_id = STATUS_LED_RED + 1;
+ }
+#endif
+#ifdef STATUS_LED_YELLOW
+ if (!strcmp (argv[1], "yellow")) {
+ led_id = STATUS_LED_YELLOW + 1;
+ }
+#endif
+#ifdef STATUS_LED_GREEN
+ if (!strcmp (argv[1], "green")) {
+ led_id = STATUS_LED_GREEN + 1;
+ }
+#endif
+ }
+
+ switch (argc) {
+ case 1:
+#if (STATUS_LED_BITS > 3)
+ for (; led_id < 4; led_id++)
+#elif (STATUS_LED_BITS > 2)
+ for (; led_id < 3; led_id++)
+#elif (STATUS_LED_BITS > 1)
+ for (; led_id < 2; led_id++)
+#elif (STATUS_LED_BITS > 0)
+ for (; led_id < 1; led_id++)
+#else
+#error "*** STATUS_LED_BITS not correct defined ***"
+#endif
+ {
+ printf ("Status LED '%s' is %s\n",
+ led_id == STATUS_LED_BOOT ? "boot"
+ : led_id == STATUS_LED_RED ? "red"
+ : led_id == STATUS_LED_YELLOW ? "yellow"
+ : led_id ==
+ STATUS_LED_GREEN ? "green" : "unknown",
+ led_dev[led_id].state ==
+ STATUS_LED_ON ? "on" : led_dev[led_id].
+ state ==
+ STATUS_LED_OFF ? "off" : led_dev[led_id].
+ state ==
+ STATUS_LED_BLINKING ? "blinking" : "unknown");
+ }
+ return 0;
+ case 2:
+ if (led_id) {
+ printf ("Status LED '%s' is %s\n", argv[1],
+ led_dev[led_id - 1].state ==
+ STATUS_LED_ON ? "on" : led_dev[led_id -
+ 1].state ==
+ STATUS_LED_OFF ? "off" : led_dev[led_id -
+ 1].state ==
+ STATUS_LED_BLINKING ? "blinking" : "unknown");
+ return 0;
+ } else
+ break;
+ case 3:
+ if (led_id) {
+ if (!strcmp (argv[2], "on")) {
+ status_led_set (led_id - 1, STATUS_LED_ON);
+ return 0;
+ } else if (!strcmp (argv[2], "off")) {
+ status_led_set (led_id - 1, STATUS_LED_OFF);
+ return 0;
+ } else if (!strcmp (argv[2], "blink")) {
+ status_led_set (led_id - 1,
+ STATUS_LED_BLINKING);
+ return 0;
+ } else
+ break;
+ } else
+ break;
+ default:
+ break;
+ }
+ printf ("Usage:\n%s\n", cmdtp->usage);
+ return 1;
+}
+
+#ifdef STATUS_LED_BOOT
+#ifdef STATUS_LED_RED
+#ifdef STATUS_LED_YELLOW
+#ifdef STATUS_LED_GREEN
+#define __NAME_STR " - name: boot|red|yellow|green\n"
+#else
+#define __NAME_STR " - name: boot|red|yellow\n"
+#endif
+#else
+#define __NAME_STR " - name: boot|red\n"
+#endif
+#else
+#define __NAME_STR " - name: boot\n"
+#endif
+#else
+#define __NAME_STR " - name: (no such defined)\n"
+#endif
+
+U_BOOT_CMD (sled, 3, 0, do_sled,
+ "sled - check and set status led\n",
+ "sled [name [state]]\n" __NAME_STR " - state: on|off|blink\n");
+#endif /* CFG_CMD_BSP */
+#endif /* CONFIG_STATUS_LED */