blob: 5ae035b986b492d17c983444f8cfaebdeffb826a [file] [log] [blame]
/*
* Ethernet driver for TI TMS320DM644x (DaVinci) chips.
*
* Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
*
* Parts shamelessly stolen from TI's dm644x_emac.c. Original copyright
* follows:
*
* ----------------------------------------------------------------------------
*
* dm644x_emac.c
*
* TI DaVinci (DM644X) EMAC peripheral driver source for DV-EVM
*
* Copyright (C) 2005 Texas Instruments.
*
* ----------------------------------------------------------------------------
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
* ----------------------------------------------------------------------------
* Modifications:
* ver. 1.0: Sep 2005, Anant Gole - Created EMAC version for uBoot.
* ver 1.1: Nov 2005, Anant Gole - Extended the RX logic for multiple descriptors
*
*/
#include <common.h>
#include <command.h>
#include <net.h>
#include <miiphy.h>
#include <asm/arch/emac_defs.h>
#ifdef CONFIG_DRIVER_TI_EMAC
#ifdef CONFIG_CMD_NET
unsigned int emac_dbg = 0;
#define debug_emac(fmt,args...) if (emac_dbg) printf(fmt,##args)
/* Internal static functions */
static int dm644x_eth_hw_init (void);
static int dm644x_eth_open (void);
static int dm644x_eth_close (void);
static int dm644x_eth_send_packet (volatile void *packet, int length);
static int dm644x_eth_rcv_packet (void);
static void dm644x_eth_mdio_enable(void);
static int gen_init_phy(int phy_addr);
static int gen_is_phy_connected(int phy_addr);
static int gen_get_link_speed(int phy_addr);
static int gen_auto_negotiate(int phy_addr);
/* Wrappers exported to the U-Boot proper */
int eth_hw_init(void)
{
return(dm644x_eth_hw_init());
}
int eth_init(bd_t * bd)
{
return(dm644x_eth_open());
}
void eth_halt(void)
{
dm644x_eth_close();
}
int eth_send(volatile void *packet, int length)
{
return(dm644x_eth_send_packet(packet, length));
}
int eth_rx(void)
{
return(dm644x_eth_rcv_packet());
}
void eth_mdio_enable(void)
{
dm644x_eth_mdio_enable();
}
/* End of wrappers */
static u_int8_t dm644x_eth_mac_addr[] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
/*
* This function must be called before emac_open() if you want to override
* the default mac address.
*/
void dm644x_eth_set_mac_addr(const u_int8_t *addr)
{
int i;
for (i = 0; i < sizeof (dm644x_eth_mac_addr); i++) {
dm644x_eth_mac_addr[i] = addr[i];
}
}
/* EMAC Addresses */
static volatile emac_regs *adap_emac = (emac_regs *)EMAC_BASE_ADDR;
static volatile ewrap_regs *adap_ewrap = (ewrap_regs *)EMAC_WRAPPER_BASE_ADDR;
static volatile mdio_regs *adap_mdio = (mdio_regs *)EMAC_MDIO_BASE_ADDR;
/* EMAC descriptors */
static volatile emac_desc *emac_rx_desc = (emac_desc *)(EMAC_WRAPPER_RAM_ADDR + EMAC_RX_DESC_BASE);
static volatile emac_desc *emac_tx_desc = (emac_desc *)(EMAC_WRAPPER_RAM_ADDR + EMAC_TX_DESC_BASE);
static volatile emac_desc *emac_rx_active_head = 0;
static volatile emac_desc *emac_rx_active_tail = 0;
static int emac_rx_queue_active = 0;
/* Receive packet buffers */
static unsigned char emac_rx_buffers[EMAC_MAX_RX_BUFFERS * (EMAC_MAX_ETHERNET_PKT_SIZE + EMAC_PKT_ALIGN)];
/* PHY address for a discovered PHY (0xff - not found) */
static volatile u_int8_t active_phy_addr = 0xff;
phy_t phy;
static void dm644x_eth_mdio_enable(void)
{
u_int32_t clkdiv;
clkdiv = (EMAC_MDIO_BUS_FREQ / EMAC_MDIO_CLOCK_FREQ) - 1;
adap_mdio->CONTROL = (clkdiv & 0xff) |
MDIO_CONTROL_ENABLE |
MDIO_CONTROL_FAULT |
MDIO_CONTROL_FAULT_ENABLE;
while (adap_mdio->CONTROL & MDIO_CONTROL_IDLE) {;}
}
/*
* Tries to find an active connected PHY. Returns 1 if address if found.
* If no active PHY (or more than one PHY) found returns 0.
* Sets active_phy_addr variable.
*/
static int dm644x_eth_phy_detect(void)
{
u_int32_t phy_act_state;
int i;
active_phy_addr = 0xff;
if ((phy_act_state = adap_mdio->ALIVE) == 0)
return(0); /* No active PHYs */
debug_emac("dm644x_eth_phy_detect(), ALIVE = 0x%08x\n", phy_act_state);
for (i = 0; i < 32; i++) {
if (phy_act_state & (1 << i)) {
if (phy_act_state & ~(1 << i))
return(0); /* More than one PHY */
else {
active_phy_addr = i;
return(1);
}
}
}
return(0); /* Just to make GCC happy */
}
/* Read a PHY register via MDIO inteface. Returns 1 on success, 0 otherwise */
int dm644x_eth_phy_read(u_int8_t phy_addr, u_int8_t reg_num, u_int16_t *data)
{
int tmp;
while (adap_mdio->USERACCESS0 & MDIO_USERACCESS0_GO) {;}
adap_mdio->USERACCESS0 = MDIO_USERACCESS0_GO |
MDIO_USERACCESS0_WRITE_READ |
((reg_num & 0x1f) << 21) |
((phy_addr & 0x1f) << 16);
/* Wait for command to complete */
while ((tmp = adap_mdio->USERACCESS0) & MDIO_USERACCESS0_GO) {;}
if (tmp & MDIO_USERACCESS0_ACK) {
*data = tmp & 0xffff;
return(1);
}
*data = -1;
return(0);
}
/* Write to a PHY register via MDIO inteface. Blocks until operation is complete. */
int dm644x_eth_phy_write(u_int8_t phy_addr, u_int8_t reg_num, u_int16_t data)
{
while (adap_mdio->USERACCESS0 & MDIO_USERACCESS0_GO) {;}
adap_mdio->USERACCESS0 = MDIO_USERACCESS0_GO |
MDIO_USERACCESS0_WRITE_WRITE |
((reg_num & 0x1f) << 21) |
((phy_addr & 0x1f) << 16) |
(data & 0xffff);
/* Wait for command to complete */
while (adap_mdio->USERACCESS0 & MDIO_USERACCESS0_GO) {;}
return(1);
}
/* PHY functions for a generic PHY */
static int gen_init_phy(int phy_addr)
{
int ret = 1;
if (gen_get_link_speed(phy_addr)) {
/* Try another time */
ret = gen_get_link_speed(phy_addr);
}
return(ret);
}
static int gen_is_phy_connected(int phy_addr)
{
u_int16_t dummy;
return(dm644x_eth_phy_read(phy_addr, PHY_PHYIDR1, &dummy));
}
static int gen_get_link_speed(int phy_addr)
{
u_int16_t tmp;
if (dm644x_eth_phy_read(phy_addr, MII_STATUS_REG, &tmp) && (tmp & 0x04))
return(1);
return(0);
}
static int gen_auto_negotiate(int phy_addr)
{
u_int16_t tmp;
if (!dm644x_eth_phy_read(phy_addr, PHY_BMCR, &tmp))
return(0);
/* Restart Auto_negotiation */
tmp |= PHY_BMCR_AUTON;
dm644x_eth_phy_write(phy_addr, PHY_BMCR, tmp);
/*check AutoNegotiate complete */
udelay (10000);
if (!dm644x_eth_phy_read(phy_addr, PHY_BMSR, &tmp))
return(0);
if (!(tmp & PHY_BMSR_AUTN_COMP))
return(0);
return(gen_get_link_speed(phy_addr));
}
/* End of generic PHY functions */
#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
static int dm644x_mii_phy_read(char *devname, unsigned char addr, unsigned char reg, unsigned short *value)
{
return(dm644x_eth_phy_read(addr, reg, value) ? 0 : 1);
}
static int dm644x_mii_phy_write(char *devname, unsigned char addr, unsigned char reg, unsigned short value)
{
return(dm644x_eth_phy_write(addr, reg, value) ? 0 : 1);
}
int dm644x_eth_miiphy_initialize(bd_t *bis)
{
miiphy_register(phy.name, dm644x_mii_phy_read, dm644x_mii_phy_write);
return(1);
}
#endif
/*
* This function initializes the emac hardware. It does NOT initialize
* EMAC modules power or pin multiplexors, that is done by board_init()
* much earlier in bootup process. Returns 1 on success, 0 otherwise.
*/
static int dm644x_eth_hw_init(void)
{
u_int32_t phy_id;
u_int16_t tmp;
int i;
dm644x_eth_mdio_enable();
for (i = 0; i < 256; i++) {
if (adap_mdio->ALIVE)
break;
udelay(10);
}
if (i >= 256) {
printf("No ETH PHY detected!!!\n");
return(0);
}
/* Find if a PHY is connected and get it's address */
if (!dm644x_eth_phy_detect())
return(0);
/* Get PHY ID and initialize phy_ops for a detected PHY */
if (!dm644x_eth_phy_read(active_phy_addr, PHY_PHYIDR1, &tmp)) {
active_phy_addr = 0xff;
return(0);
}
phy_id = (tmp << 16) & 0xffff0000;
if (!dm644x_eth_phy_read(active_phy_addr, PHY_PHYIDR2, &tmp)) {
active_phy_addr = 0xff;
return(0);
}
phy_id |= tmp & 0x0000ffff;
switch (phy_id) {
case PHY_LXT972:
sprintf(phy.name, "LXT972 @ 0x%02x", active_phy_addr);
phy.init = lxt972_init_phy;
phy.is_phy_connected = lxt972_is_phy_connected;
phy.get_link_speed = lxt972_get_link_speed;
phy.auto_negotiate = lxt972_auto_negotiate;
break;
case PHY_DP83848:
sprintf(phy.name, "DP83848 @ 0x%02x", active_phy_addr);
phy.init = dp83848_init_phy;
phy.is_phy_connected = dp83848_is_phy_connected;
phy.get_link_speed = dp83848_get_link_speed;
phy.auto_negotiate = dp83848_auto_negotiate;
break;
default:
sprintf(phy.name, "GENERIC @ 0x%02x", active_phy_addr);
phy.init = gen_init_phy;
phy.is_phy_connected = gen_is_phy_connected;
phy.get_link_speed = gen_get_link_speed;
phy.auto_negotiate = gen_auto_negotiate;
}
printf("Ethernet PHY: %s\n", phy.name);
return(1);
}
/* Eth device open */
static int dm644x_eth_open(void)
{
dv_reg_p addr;
u_int32_t clkdiv, cnt;
volatile emac_desc *rx_desc;
debug_emac("+ emac_open\n");
/* Reset EMAC module and disable interrupts in wrapper */
adap_emac->SOFTRESET = 1;
while (adap_emac->SOFTRESET != 0) {;}
adap_ewrap->EWCTL = 0;
for (cnt = 0; cnt < 5; cnt++) {
clkdiv = adap_ewrap->EWCTL;
}
rx_desc = emac_rx_desc;
adap_emac->TXCONTROL = 0x01;
adap_emac->RXCONTROL = 0x01;
/* Set MAC Addresses & Init multicast Hash to 0 (disable any multicast receive) */
/* Using channel 0 only - other channels are disabled */
adap_emac->MACINDEX = 0;
adap_emac->MACADDRHI =
(dm644x_eth_mac_addr[3] << 24) |
(dm644x_eth_mac_addr[2] << 16) |
(dm644x_eth_mac_addr[1] << 8) |
(dm644x_eth_mac_addr[0]);
adap_emac->MACADDRLO =
(dm644x_eth_mac_addr[5] << 8) |
(dm644x_eth_mac_addr[4]);
adap_emac->MACHASH1 = 0;
adap_emac->MACHASH2 = 0;
/* Set source MAC address - REQUIRED */
adap_emac->MACSRCADDRHI =
(dm644x_eth_mac_addr[3] << 24) |
(dm644x_eth_mac_addr[2] << 16) |
(dm644x_eth_mac_addr[1] << 8) |
(dm644x_eth_mac_addr[0]);
adap_emac->MACSRCADDRLO =
(dm644x_eth_mac_addr[4] << 8) |
(dm644x_eth_mac_addr[5]);
/* Set DMA 8 TX / 8 RX Head pointers to 0 */
addr = &adap_emac->TX0HDP;
for(cnt = 0; cnt < 16; cnt++)
*addr++ = 0;
addr = &adap_emac->RX0HDP;
for(cnt = 0; cnt < 16; cnt++)
*addr++ = 0;
/* Clear Statistics (do this before setting MacControl register) */
addr = &adap_emac->RXGOODFRAMES;
for(cnt = 0; cnt < EMAC_NUM_STATS; cnt++)
*addr++ = 0;
/* No multicast addressing */
adap_emac->MACHASH1 = 0;
adap_emac->MACHASH2 = 0;
/* Create RX queue and set receive process in place */
emac_rx_active_head = emac_rx_desc;
for (cnt = 0; cnt < EMAC_MAX_RX_BUFFERS; cnt++) {
rx_desc->next = (u_int32_t)(rx_desc + 1);
rx_desc->buffer = &emac_rx_buffers[cnt * (EMAC_MAX_ETHERNET_PKT_SIZE + EMAC_PKT_ALIGN)];
rx_desc->buff_off_len = EMAC_MAX_ETHERNET_PKT_SIZE;
rx_desc->pkt_flag_len = EMAC_CPPI_OWNERSHIP_BIT;
rx_desc++;
}
/* Set the last descriptor's "next" parameter to 0 to end the RX desc list */
rx_desc--;
rx_desc->next = 0;
emac_rx_active_tail = rx_desc;
emac_rx_queue_active = 1;
/* Enable TX/RX */
adap_emac->RXMAXLEN = EMAC_MAX_ETHERNET_PKT_SIZE;
adap_emac->RXBUFFEROFFSET = 0;
/* No fancy configs - Use this for promiscous for debug - EMAC_RXMBPENABLE_RXCAFEN_ENABLE */
adap_emac->RXMBPENABLE = EMAC_RXMBPENABLE_RXBROADEN;
/* Enable ch 0 only */
adap_emac->RXUNICASTSET = 0x01;
/* Enable MII interface and Full duplex mode */
adap_emac->MACCONTROL = (EMAC_MACCONTROL_MIIEN_ENABLE | EMAC_MACCONTROL_FULLDUPLEX_ENABLE);
/* Init MDIO & get link state */
clkdiv = (EMAC_MDIO_BUS_FREQ / EMAC_MDIO_CLOCK_FREQ) - 1;
adap_mdio->CONTROL = ((clkdiv & 0xff) | MDIO_CONTROL_ENABLE | MDIO_CONTROL_FAULT);
if (!phy.get_link_speed(active_phy_addr))
return(0);
/* Start receive process */
adap_emac->RX0HDP = (u_int32_t)emac_rx_desc;
debug_emac("- emac_open\n");
return(1);
}
/* EMAC Channel Teardown */
static void dm644x_eth_ch_teardown(int ch)
{
dv_reg dly = 0xff;
dv_reg cnt;
debug_emac("+ emac_ch_teardown\n");
if (ch == EMAC_CH_TX) {
/* Init TX channel teardown */
adap_emac->TXTEARDOWN = 1;
for(cnt = 0; cnt != 0xfffffffc; cnt = adap_emac->TX0CP) {
/* Wait here for Tx teardown completion interrupt to occur
* Note: A task delay can be called here to pend rather than
* occupying CPU cycles - anyway it has been found that teardown
* takes very few cpu cycles and does not affect functionality */
dly--;
udelay(1);
if (dly == 0)
break;
}
adap_emac->TX0CP = cnt;
adap_emac->TX0HDP = 0;
} else {
/* Init RX channel teardown */
adap_emac->RXTEARDOWN = 1;
for(cnt = 0; cnt != 0xfffffffc; cnt = adap_emac->RX0CP) {
/* Wait here for Rx teardown completion interrupt to occur
* Note: A task delay can be called here to pend rather than
* occupying CPU cycles - anyway it has been found that teardown
* takes very few cpu cycles and does not affect functionality */
dly--;
udelay(1);
if (dly == 0)
break;
}
adap_emac->RX0CP = cnt;
adap_emac->RX0HDP = 0;
}
debug_emac("- emac_ch_teardown\n");
}
/* Eth device close */
static int dm644x_eth_close(void)
{
debug_emac("+ emac_close\n");
dm644x_eth_ch_teardown(EMAC_CH_TX); /* TX Channel teardown */
dm644x_eth_ch_teardown(EMAC_CH_RX); /* RX Channel teardown */
/* Reset EMAC module and disable interrupts in wrapper */
adap_emac->SOFTRESET = 1;
adap_ewrap->EWCTL = 0;
debug_emac("- emac_close\n");
return(1);
}
static int tx_send_loop = 0;
/*
* This function sends a single packet on the network and returns
* positive number (number of bytes transmitted) or negative for error
*/
static int dm644x_eth_send_packet (volatile void *packet, int length)
{
int ret_status = -1;
tx_send_loop = 0;
/* Return error if no link */
if (!phy.get_link_speed (active_phy_addr)) {
printf ("WARN: emac_send_packet: No link\n");
return (ret_status);
}
/* Check packet size and if < EMAC_MIN_ETHERNET_PKT_SIZE, pad it up */
if (length < EMAC_MIN_ETHERNET_PKT_SIZE) {
length = EMAC_MIN_ETHERNET_PKT_SIZE;
}
/* Populate the TX descriptor */
emac_tx_desc->next = 0;
emac_tx_desc->buffer = (u_int8_t *) packet;
emac_tx_desc->buff_off_len = (length & 0xffff);
emac_tx_desc->pkt_flag_len = ((length & 0xffff) |
EMAC_CPPI_SOP_BIT |
EMAC_CPPI_OWNERSHIP_BIT |
EMAC_CPPI_EOP_BIT);
/* Send the packet */
adap_emac->TX0HDP = (unsigned int) emac_tx_desc;
/* Wait for packet to complete or link down */
while (1) {
if (!phy.get_link_speed (active_phy_addr)) {
dm644x_eth_ch_teardown (EMAC_CH_TX);
return (ret_status);
}
if (adap_emac->TXINTSTATRAW & 0x01) {
ret_status = length;
break;
}
tx_send_loop++;
}
return (ret_status);
}
/*
* This function handles receipt of a packet from the network
*/
static int dm644x_eth_rcv_packet (void)
{
volatile emac_desc *rx_curr_desc;
volatile emac_desc *curr_desc;
volatile emac_desc *tail_desc;
int status, ret = -1;
rx_curr_desc = emac_rx_active_head;
status = rx_curr_desc->pkt_flag_len;
if ((rx_curr_desc) && ((status & EMAC_CPPI_OWNERSHIP_BIT) == 0)) {
if (status & EMAC_CPPI_RX_ERROR_FRAME) {
/* Error in packet - discard it and requeue desc */
printf ("WARN: emac_rcv_pkt: Error in packet\n");
} else {
NetReceive (rx_curr_desc->buffer,
(rx_curr_desc->buff_off_len & 0xffff));
ret = rx_curr_desc->buff_off_len & 0xffff;
}
/* Ack received packet descriptor */
adap_emac->RX0CP = (unsigned int) rx_curr_desc;
curr_desc = rx_curr_desc;
emac_rx_active_head =
(volatile emac_desc *) rx_curr_desc->next;
if (status & EMAC_CPPI_EOQ_BIT) {
if (emac_rx_active_head) {
adap_emac->RX0HDP =
(unsigned int) emac_rx_active_head;
} else {
emac_rx_queue_active = 0;
printf ("INFO:emac_rcv_packet: RX Queue not active\n");
}
}
/* Recycle RX descriptor */
rx_curr_desc->buff_off_len = EMAC_MAX_ETHERNET_PKT_SIZE;
rx_curr_desc->pkt_flag_len = EMAC_CPPI_OWNERSHIP_BIT;
rx_curr_desc->next = 0;
if (emac_rx_active_head == 0) {
printf ("INFO: emac_rcv_pkt: active queue head = 0\n");
emac_rx_active_head = curr_desc;
emac_rx_active_tail = curr_desc;
if (emac_rx_queue_active != 0) {
adap_emac->RX0HDP =
(unsigned int) emac_rx_active_head;
printf ("INFO: emac_rcv_pkt: active queue head = 0, HDP fired\n");
emac_rx_queue_active = 1;
}
} else {
tail_desc = emac_rx_active_tail;
emac_rx_active_tail = curr_desc;
tail_desc->next = (unsigned int) curr_desc;
status = tail_desc->pkt_flag_len;
if (status & EMAC_CPPI_EOQ_BIT) {
adap_emac->RX0HDP = (unsigned int) curr_desc;
status &= ~EMAC_CPPI_EOQ_BIT;
tail_desc->pkt_flag_len = status;
}
}
return (ret);
}
return (0);
}
#endif /* CONFIG_CMD_NET */
#endif /* CONFIG_DRIVER_TI_EMAC */