sunxi: Select SUN8I_RSB more carefully
SUN8I_RSB should not be selected by MACH_SUN8I, because the hardware
is not present in half of those SoCs (H3/H5, R40, and V3s). Move the
selection to the SoCs where the hardware actually exists.
As it currently stands, selecting that option also requires using it in
some way, which is not the case for one A80 board. Since we have only
three A80 boards in total, we select it their via their defconfigs.
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
[Andre: fixing up Sunchip_CX-A99 build]
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index 7308f97..03054a3 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -260,6 +260,7 @@
select ARCH_SUPPORT_PSCI
select DRAM_SUN8I_A23
select PHY_SUN4I_USB
+ select SUN8I_RSB
select SUNXI_GEN_SUN6I
select SUPPORT_SPL
select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT
@@ -273,6 +274,7 @@
select ARCH_SUPPORT_PSCI
select DRAM_SUN8I_A33
select PHY_SUN4I_USB
+ select SUN8I_RSB
select SUNXI_GEN_SUN6I
select SUPPORT_SPL
select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT
@@ -283,6 +285,7 @@
select CPU_V7A
select DRAM_SUN8I_A83T
select PHY_SUN4I_USB
+ select SUN8I_RSB
select SUNXI_GEN_SUN6I
select MMC_SUNXI_HAS_NEW_MODE
select MMC_SUNXI_HAS_MODE_SWITCH
@@ -329,7 +332,6 @@
select DRAM_SUN9I
select SUN6I_PRCM
select SUNXI_GEN_SUN6I
- select SUN8I_RSB
select SUPPORT_SPL
config MACH_SUN50I
@@ -377,7 +379,6 @@
# The sun8i SoCs share a lot, this helps to avoid a lot of "if A23 || A33"
config MACH_SUN8I
bool
- select SUN8I_RSB
select SUN6I_PRCM
default y if MACH_SUN8I_A23
default y if MACH_SUN8I_A33
diff --git a/configs/Cubieboard4_defconfig b/configs/Cubieboard4_defconfig
index c66f29e..0377bb8 100644
--- a/configs/Cubieboard4_defconfig
+++ b/configs/Cubieboard4_defconfig
@@ -11,5 +11,6 @@
CONFIG_USB0_ID_DET="PH16"
CONFIG_USB1_VBUS_PIN="PH14"
CONFIG_USB3_VBUS_PIN="PH15"
+CONFIG_SUN8I_RSB=y
CONFIG_AXP_GPIO=y
CONFIG_AXP809_POWER=y
diff --git a/configs/Merrii_A80_Optimus_defconfig b/configs/Merrii_A80_Optimus_defconfig
index 0944e64..8fb6504 100644
--- a/configs/Merrii_A80_Optimus_defconfig
+++ b/configs/Merrii_A80_Optimus_defconfig
@@ -11,5 +11,6 @@
CONFIG_USB0_ID_DET="PH3"
CONFIG_USB1_VBUS_PIN="PH4"
CONFIG_USB3_VBUS_PIN="PH5"
+CONFIG_SUN8I_RSB=y
CONFIG_AXP_GPIO=y
CONFIG_AXP809_POWER=y