engicam: common: Move common board code
Move possible common board code into common area
from supported boards.
Cc: Stefano Babic <sbabic@denx.de>
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
diff --git a/board/engicam/common/Makefile b/board/engicam/common/Makefile
index 6fd039c..6630fea 100644
--- a/board/engicam/common/Makefile
+++ b/board/engicam/common/Makefile
@@ -3,4 +3,5 @@
# SPDX-License-Identifier: GPL-2.0+
#
+obj-y := board.o
obj-$(CONFIG_SPL_BUILD) += spl.o
diff --git a/board/engicam/common/board.c b/board/engicam/common/board.c
new file mode 100644
index 0000000..8a83608
--- /dev/null
+++ b/board/engicam/common/board.c
@@ -0,0 +1,56 @@
+/*
+ * Copyright (C) 2016 Amarula Solutions B.V.
+ * Copyright (C) 2016 Engicam S.r.l.
+ * Author: Jagan Teki <jagan@amarulasolutions.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <mmc.h>
+#include <asm/arch/sys_proto.h>
+
+#include "board.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifdef CONFIG_ENV_IS_IN_MMC
+void mmc_late_init(void)
+{
+ char cmd[32];
+ char mmcblk[32];
+ u32 dev_no = mmc_get_env_dev();
+
+ setenv_ulong("mmcdev", dev_no);
+
+ /* Set mmcblk env */
+ sprintf(mmcblk, "/dev/mmcblk%dp2 rootwait rw", dev_no);
+ setenv("mmcroot", mmcblk);
+
+ sprintf(cmd, "mmc dev %d", dev_no);
+ run_command(cmd, 0);
+}
+#endif
+
+int board_init(void)
+{
+ /* Address of boot parameters */
+ gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+
+#ifdef CONFIG_NAND_MXS
+ setup_gpmi_nand();
+#endif
+
+#ifdef CONFIG_VIDEO_IPUV3
+ setup_display();
+#endif
+
+ return 0;
+}
+
+int dram_init(void)
+{
+ gd->ram_size = imx_ddr_size();
+
+ return 0;
+}
diff --git a/board/engicam/common/board.h b/board/engicam/common/board.h
new file mode 100644
index 0000000..9717e40
--- /dev/null
+++ b/board/engicam/common/board.h
@@ -0,0 +1,12 @@
+/*
+ * Copyright (C) 2016 Amarula Solutions B.V.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _BOARD_H_
+#define _BOARD_H_
+void mmc_late_init(void);
+void setup_gpmi_nand(void);
+void setup_display(void);
+#endif /* _BOARD_H_ */
diff --git a/board/engicam/geam6ul/geam6ul.c b/board/engicam/geam6ul/geam6ul.c
index 408b476..c992035 100644
--- a/board/engicam/geam6ul/geam6ul.c
+++ b/board/engicam/geam6ul/geam6ul.c
@@ -20,6 +20,8 @@
#include <asm/arch/sys_proto.h>
#include <asm/imx-common/iomux-v3.h>
+#include "../common/board.h"
+
DECLARE_GLOBAL_DATA_PTR;
#ifdef CONFIG_NAND_MXS
@@ -47,7 +49,7 @@
IOMUX_PADS(PAD_NAND_READY_B__RAWNAND_READY_B | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
};
-static void setup_gpmi_nand(void)
+void setup_gpmi_nand(void)
{
struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
@@ -88,24 +90,6 @@
}
#endif /* CONFIG_NAND_MXS */
-#ifdef CONFIG_ENV_IS_IN_MMC
-static void mmc_late_init(void)
-{
- char cmd[32];
- char mmcblk[32];
- u32 dev_no = mmc_get_env_dev();
-
- setenv_ulong("mmcdev", dev_no);
-
- /* Set mmcblk env */
- sprintf(mmcblk, "/dev/mmcblk%dp2 rootwait rw", dev_no);
- setenv("mmcroot", mmcblk);
-
- sprintf(cmd, "mmc dev %d", dev_no);
- run_command(cmd, 0);
-}
-#endif
-
int board_late_init(void)
{
switch ((imx6_src_get_boot_mode() & IMX6_BMODE_MASK) >>
@@ -131,25 +115,6 @@
return 0;
}
-int board_init(void)
-{
- /* Address of boot parameters */
- gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
-
-#ifdef CONFIG_NAND_MXS
- setup_gpmi_nand();
-#endif
-
- return 0;
-}
-
-int dram_init(void)
-{
- gd->ram_size = imx_ddr_size();
-
- return 0;
-}
-
#ifdef CONFIG_SPL_BUILD
/* MMC board initialization is needed till adding DM support in SPL */
#if defined(CONFIG_FSL_ESDHC) && !defined(CONFIG_DM_MMC)
diff --git a/board/engicam/icorem6/icorem6.c b/board/engicam/icorem6/icorem6.c
index a881d83..cb4613b 100644
--- a/board/engicam/icorem6/icorem6.c
+++ b/board/engicam/icorem6/icorem6.c
@@ -21,6 +21,8 @@
#include <asm/imx-common/iomux-v3.h>
#include <asm/imx-common/video.h>
+#include "../common/board.h"
+
DECLARE_GLOBAL_DATA_PTR;
#ifdef CONFIG_NAND_MXS
@@ -48,7 +50,7 @@
IOMUX_PADS(PAD_NANDF_D7__NAND_DATA07 | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
};
-static void setup_gpmi_nand(void)
+void setup_gpmi_nand(void)
{
struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
@@ -141,7 +143,7 @@
size_t display_count = ARRAY_SIZE(displays);
-static void setup_display(void)
+void setup_display(void)
{
struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
@@ -190,24 +192,6 @@
}
#endif /* CONFIG_VIDEO_IPUV3 */
-#ifdef CONFIG_ENV_IS_IN_MMC
-static void mmc_late_init(void)
-{
- char cmd[32];
- char mmcblk[32];
- u32 dev_no = mmc_get_env_dev();
-
- setenv_ulong("mmcdev", dev_no);
-
- /* Set mmcblk env */
- sprintf(mmcblk, "/dev/mmcblk%dp2 rootwait rw", dev_no);
- setenv("mmcroot", mmcblk);
-
- sprintf(cmd, "mmc dev %d", dev_no);
- run_command(cmd, 0);
-}
-#endif
-
int board_late_init(void)
{
switch ((imx6_src_get_boot_mode() & IMX6_BMODE_MASK) >>
@@ -235,29 +219,6 @@
return 0;
}
-int board_init(void)
-{
- /* Address of boot parameters */
- gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
-
-#ifdef CONFIG_NAND_MXS
- setup_gpmi_nand();
-#endif
-
-#ifdef CONFIG_VIDEO_IPUV3
- setup_display();
-#endif
-
- return 0;
-}
-
-int dram_init(void)
-{
- gd->ram_size = imx_ddr_size();
-
- return 0;
-}
-
#ifdef CONFIG_SPL_BUILD
/* MMC board initialization is needed till adding DM support in SPL */
#if defined(CONFIG_FSL_ESDHC) && !defined(CONFIG_DM_MMC)
diff --git a/board/engicam/icorem6_rqs/icorem6_rqs.c b/board/engicam/icorem6_rqs/icorem6_rqs.c
index 854a34e..bdd9e0e 100644
--- a/board/engicam/icorem6_rqs/icorem6_rqs.c
+++ b/board/engicam/icorem6_rqs/icorem6_rqs.c
@@ -20,38 +20,16 @@
#include <asm/arch/sys_proto.h>
#include <asm/imx-common/iomux-v3.h>
+#include "../common/board.h"
+
DECLARE_GLOBAL_DATA_PTR;
-int board_init(void)
-{
- /* Address of boot parameters */
- gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
-
- return 0;
-}
-
#ifdef CONFIG_ENV_IS_IN_MMC
int board_mmc_get_env_dev(int devno)
{
/* dev 0 for SD/eSD, dev 1 for MMC/eMMC */
return (devno == 3) ? 1 : 0;
}
-
-static void mmc_late_init(void)
-{
- char cmd[32];
- char mmcblk[32];
- u32 dev_no = mmc_get_env_dev();
-
- setenv_ulong("mmcdev", dev_no);
-
- /* Set mmcblk env */
- sprintf(mmcblk, "/dev/mmcblk%dp2 rootwait rw", dev_no);
- setenv("mmcroot", mmcblk);
-
- sprintf(cmd, "mmc dev %d", dev_no);
- run_command(cmd, 0);
-}
#endif
int board_late_init(void)
@@ -80,13 +58,6 @@
return 0;
}
-int dram_init(void)
-{
- gd->ram_size = imx_ddr_size();
-
- return 0;
-}
-
#ifdef CONFIG_SPL_BUILD
#include <spl.h>
diff --git a/board/engicam/isiotmx6ul/isiotmx6ul.c b/board/engicam/isiotmx6ul/isiotmx6ul.c
index fa36519..6607b04 100644
--- a/board/engicam/isiotmx6ul/isiotmx6ul.c
+++ b/board/engicam/isiotmx6ul/isiotmx6ul.c
@@ -20,6 +20,8 @@
#include <asm/arch/sys_proto.h>
#include <asm/imx-common/iomux-v3.h>
+#include "../common/board.h"
+
DECLARE_GLOBAL_DATA_PTR;
#ifdef CONFIG_NAND_MXS
@@ -47,7 +49,7 @@
IOMUX_PADS(PAD_NAND_READY_B__RAWNAND_READY_B | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
};
-static void setup_gpmi_nand(void)
+void setup_gpmi_nand(void)
{
struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
@@ -94,22 +96,6 @@
/* dev 0 for SD/eSD, dev 1 for MMC/eMMC */
return (devno == 0) ? 0 : 1;
}
-
-static void mmc_late_init(void)
-{
- char cmd[32];
- char mmcblk[32];
- u32 dev_no = mmc_get_env_dev();
-
- setenv_ulong("mmcdev", dev_no);
-
- /* Set mmcblk env */
- sprintf(mmcblk, "/dev/mmcblk%dp2 rootwait rw", dev_no);
- setenv("mmcroot", mmcblk);
-
- sprintf(cmd, "mmc dev %d", dev_no);
- run_command(cmd, 0);
-}
#endif
int board_late_init(void)
@@ -144,24 +130,6 @@
return 0;
}
-int board_init(void)
-{
- /* Address of boot parameters */
- gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
-
-#ifdef CONFIG_NAND_MXS
- setup_gpmi_nand();
-#endif
- return 0;
-}
-
-int dram_init(void)
-{
- gd->ram_size = imx_ddr_size();
-
- return 0;
-}
-
#ifdef CONFIG_SPL_BUILD
#include <spl.h>