Restructure POST directory to support of other CPUs, boards, etc.
diff --git a/post/cpu/mpc8xx/ether.c b/post/cpu/mpc8xx/ether.c
new file mode 100644
index 0000000..8c87b59
--- /dev/null
+++ b/post/cpu/mpc8xx/ether.c
@@ -0,0 +1,631 @@
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/*
+ * Ethernet test
+ *
+ * The Serial Communication Controllers (SCC) listed in ctlr_list array below
+ * are tested in the loopback ethernet mode.
+ * The controllers are configured accordingly and several packets
+ * are transmitted. The configurable test parameters are:
+ * MIN_PACKET_LENGTH - minimum size of packet to transmit
+ * MAX_PACKET_LENGTH - maximum size of packet to transmit
+ * TEST_NUM - number of tests
+ */
+
+#ifdef CONFIG_POST
+
+#include <post.h>
+#if CONFIG_POST & CFG_POST_ETHER
+#if defined(CONFIG_8xx)
+#include <commproc.h>
+#elif defined(CONFIG_MPC8260)
+#include <asm/cpm_8260.h>
+#else
+#error "Apparently a bad configuration, please fix."
+#endif
+
+#include <command.h>
+#include <net.h>
+#include <serial.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define MIN_PACKET_LENGTH 64
+#define MAX_PACKET_LENGTH 256
+#define TEST_NUM 1
+
+#define CTLR_SCC 0
+
+extern void spi_init_f (void);
+extern void spi_init_r (void);
+
+/* The list of controllers to test */
+#if defined(CONFIG_MPC823)
+static int ctlr_list[][2] = { {CTLR_SCC, 1} };
+#else
+static int ctlr_list[][2] = { };
+#endif
+
+#define CTRL_LIST_SIZE (sizeof(ctlr_list) / sizeof(ctlr_list[0]))
+
+static struct {
+ void (*init) (int index);
+ void (*halt) (int index);
+ int (*send) (int index, volatile void *packet, int length);
+ int (*recv) (int index, void *packet, int length);
+} ctlr_proc[1];
+
+static char *ctlr_name[1] = { "SCC" };
+
+/* Ethernet Transmit and Receive Buffers */
+#define DBUF_LENGTH 1520
+
+#define TX_BUF_CNT 2
+
+#define TOUT_LOOP 100
+
+static char txbuf[DBUF_LENGTH];
+
+static uint rxIdx; /* index of the current RX buffer */
+static uint txIdx; /* index of the current TX buffer */
+
+/*
+ * SCC Ethernet Tx and Rx buffer descriptors allocated at the
+ * immr->udata_bd address on Dual-Port RAM
+ * Provide for Double Buffering
+ */
+
+typedef volatile struct CommonBufferDescriptor {
+ cbd_t rxbd[PKTBUFSRX]; /* Rx BD */
+ cbd_t txbd[TX_BUF_CNT]; /* Tx BD */
+} RTXBD;
+
+static RTXBD *rtx;
+
+ /*
+ * SCC callbacks
+ */
+
+static void scc_init (int scc_index)
+{
+ bd_t *bd = gd->bd;
+
+ static int proff[] =
+ { PROFF_SCC1, PROFF_SCC2, PROFF_SCC3, PROFF_SCC4 };
+ static unsigned int cpm_cr[] =
+ { CPM_CR_CH_SCC1, CPM_CR_CH_SCC2, CPM_CR_CH_SCC3,
+CPM_CR_CH_SCC4 };
+
+ int i;
+ scc_enet_t *pram_ptr;
+
+ volatile immap_t *immr = (immap_t *) CFG_IMMR;
+
+ immr->im_cpm.cp_scc[scc_index].scc_gsmrl &=
+ ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+
+#if defined(CONFIG_FADS)
+#if defined(CONFIG_MPC860T) || defined(CONFIG_MPC86xADS)
+ /* The FADS860T and MPC86xADS don't use the MODEM_EN or DATA_VOICE signals. */
+ *((uint *) BCSR4) &= ~BCSR4_ETHLOOP;
+ *((uint *) BCSR4) |= BCSR4_TFPLDL | BCSR4_TPSQEL;
+ *((uint *) BCSR1) &= ~BCSR1_ETHEN;
+#else
+ *((uint *) BCSR4) &= ~(BCSR4_ETHLOOP | BCSR4_MODEM_EN);
+ *((uint *) BCSR4) |= BCSR4_TFPLDL | BCSR4_TPSQEL | BCSR4_DATA_VOICE;
+ *((uint *) BCSR1) &= ~BCSR1_ETHEN;
+#endif
+#endif
+
+ pram_ptr = (scc_enet_t *) & (immr->im_cpm.cp_dparam[proff[scc_index]]);
+
+ rxIdx = 0;
+ txIdx = 0;
+
+#ifdef CFG_ALLOC_DPRAM
+ rtx = (RTXBD *) (immr->im_cpm.cp_dpmem +
+ dpram_alloc_align (sizeof (RTXBD), 8));
+#else
+ rtx = (RTXBD *) (immr->im_cpm.cp_dpmem + CPM_SCC_BASE);
+#endif
+
+#if 0
+
+#if (defined(PA_ENET_RXD) && defined(PA_ENET_TXD))
+ /* Configure port A pins for Txd and Rxd.
+ */
+ immr->im_ioport.iop_papar |= (PA_ENET_RXD | PA_ENET_TXD);
+ immr->im_ioport.iop_padir &= ~(PA_ENET_RXD | PA_ENET_TXD);
+ immr->im_ioport.iop_paodr &= ~PA_ENET_TXD;
+#elif (defined(PB_ENET_RXD) && defined(PB_ENET_TXD))
+ /* Configure port B pins for Txd and Rxd.
+ */
+ immr->im_cpm.cp_pbpar |= (PB_ENET_RXD | PB_ENET_TXD);
+ immr->im_cpm.cp_pbdir &= ~(PB_ENET_RXD | PB_ENET_TXD);
+ immr->im_cpm.cp_pbodr &= ~PB_ENET_TXD;
+#else
+#error Configuration Error: exactly ONE of PA_ENET_[RT]XD, PB_ENET_[RT]XD must be defined
+#endif
+
+#if defined(PC_ENET_LBK)
+ /* Configure port C pins to disable External Loopback
+ */
+ immr->im_ioport.iop_pcpar &= ~PC_ENET_LBK;
+ immr->im_ioport.iop_pcdir |= PC_ENET_LBK;
+ immr->im_ioport.iop_pcso &= ~PC_ENET_LBK;
+ immr->im_ioport.iop_pcdat &= ~PC_ENET_LBK; /* Disable Loopback */
+#endif /* PC_ENET_LBK */
+
+ /* Configure port C pins to enable CLSN and RENA.
+ */
+ immr->im_ioport.iop_pcpar &= ~(PC_ENET_CLSN | PC_ENET_RENA);
+ immr->im_ioport.iop_pcdir &= ~(PC_ENET_CLSN | PC_ENET_RENA);
+ immr->im_ioport.iop_pcso |= (PC_ENET_CLSN | PC_ENET_RENA);
+
+ /* Configure port A for TCLK and RCLK.
+ */
+ immr->im_ioport.iop_papar |= (PA_ENET_TCLK | PA_ENET_RCLK);
+ immr->im_ioport.iop_padir &= ~(PA_ENET_TCLK | PA_ENET_RCLK);
+
+ /*
+ * Configure Serial Interface clock routing -- see section 16.7.5.3
+ * First, clear all SCC bits to zero, then set the ones we want.
+ */
+
+ immr->im_cpm.cp_sicr &= ~SICR_ENET_MASK;
+ immr->im_cpm.cp_sicr |= SICR_ENET_CLKRT;
+#else
+ /*
+ * SCC2 receive clock is BRG2
+ * SCC2 transmit clock is BRG3
+ */
+ immr->im_cpm.cp_brgc2 = 0x0001000C;
+ immr->im_cpm.cp_brgc3 = 0x0001000C;
+
+ immr->im_cpm.cp_sicr &= ~0x00003F00;
+ immr->im_cpm.cp_sicr |= 0x00000a00;
+#endif /* 0 */
+
+
+ /*
+ * Initialize SDCR -- see section 16.9.23.7
+ * SDMA configuration register
+ */
+ immr->im_siu_conf.sc_sdcr = 0x01;
+
+
+ /*
+ * Setup SCC Ethernet Parameter RAM
+ */
+
+ pram_ptr->sen_genscc.scc_rfcr = 0x18; /* Normal Operation and Mot byte ordering */
+ pram_ptr->sen_genscc.scc_tfcr = 0x18; /* Mot byte ordering, Normal access */
+
+ pram_ptr->sen_genscc.scc_mrblr = DBUF_LENGTH; /* max. ET package len 1520 */
+
+ pram_ptr->sen_genscc.scc_rbase = (unsigned int) (&rtx->rxbd[0]); /* Set RXBD tbl start at Dual Port */
+ pram_ptr->sen_genscc.scc_tbase = (unsigned int) (&rtx->txbd[0]); /* Set TXBD tbl start at Dual Port */
+
+ /*
+ * Setup Receiver Buffer Descriptors (13.14.24.18)
+ * Settings:
+ * Empty, Wrap
+ */
+
+ for (i = 0; i < PKTBUFSRX; i++) {
+ rtx->rxbd[i].cbd_sc = BD_ENET_RX_EMPTY;
+ rtx->rxbd[i].cbd_datlen = 0; /* Reset */
+ rtx->rxbd[i].cbd_bufaddr = (uint) NetRxPackets[i];
+ }
+
+ rtx->rxbd[PKTBUFSRX - 1].cbd_sc |= BD_ENET_RX_WRAP;
+
+ /*
+ * Setup Ethernet Transmitter Buffer Descriptors (13.14.24.19)
+ * Settings:
+ * Add PADs to Short FRAMES, Wrap, Last, Tx CRC
+ */
+
+ for (i = 0; i < TX_BUF_CNT; i++) {
+ rtx->txbd[i].cbd_sc =
+ (BD_ENET_TX_PAD | BD_ENET_TX_LAST | BD_ENET_TX_TC);
+ rtx->txbd[i].cbd_datlen = 0; /* Reset */
+ rtx->txbd[i].cbd_bufaddr = (uint) (&txbuf[0]);
+ }
+
+ rtx->txbd[TX_BUF_CNT - 1].cbd_sc |= BD_ENET_TX_WRAP;
+
+ /*
+ * Enter Command: Initialize Rx Params for SCC
+ */
+
+ do { /* Spin until ready to issue command */
+ __asm__ ("eieio");
+ } while (immr->im_cpm.cp_cpcr & CPM_CR_FLG);
+ /* Issue command */
+ immr->im_cpm.cp_cpcr =
+ ((CPM_CR_INIT_RX << 8) | (cpm_cr[scc_index] << 4) |
+ CPM_CR_FLG);
+ do { /* Spin until command processed */
+ __asm__ ("eieio");
+ } while (immr->im_cpm.cp_cpcr & CPM_CR_FLG);
+
+ /*
+ * Ethernet Specific Parameter RAM
+ * see table 13-16, pg. 660,
+ * pg. 681 (example with suggested settings)
+ */
+
+ pram_ptr->sen_cpres = ~(0x0); /* Preset CRC */
+ pram_ptr->sen_cmask = 0xdebb20e3; /* Constant Mask for CRC */
+ pram_ptr->sen_crcec = 0x0; /* Error Counter CRC (unused) */
+ pram_ptr->sen_alec = 0x0; /* Alignment Error Counter (unused) */
+ pram_ptr->sen_disfc = 0x0; /* Discard Frame Counter (unused) */
+ pram_ptr->sen_pads = 0x8888; /* Short Frame PAD Characters */
+
+ pram_ptr->sen_retlim = 15; /* Retry Limit Threshold */
+ pram_ptr->sen_maxflr = 1518; /* MAX Frame Length Register */
+ pram_ptr->sen_minflr = 64; /* MIN Frame Length Register */
+
+ pram_ptr->sen_maxd1 = DBUF_LENGTH; /* MAX DMA1 Length Register */
+ pram_ptr->sen_maxd2 = DBUF_LENGTH; /* MAX DMA2 Length Register */
+
+ pram_ptr->sen_gaddr1 = 0x0; /* Group Address Filter 1 (unused) */
+ pram_ptr->sen_gaddr2 = 0x0; /* Group Address Filter 2 (unused) */
+ pram_ptr->sen_gaddr3 = 0x0; /* Group Address Filter 3 (unused) */
+ pram_ptr->sen_gaddr4 = 0x0; /* Group Address Filter 4 (unused) */
+
+#define ea bd->bi_enetaddr
+ pram_ptr->sen_paddrh = (ea[5] << 8) + ea[4];
+ pram_ptr->sen_paddrm = (ea[3] << 8) + ea[2];
+ pram_ptr->sen_paddrl = (ea[1] << 8) + ea[0];
+#undef ea
+
+ pram_ptr->sen_pper = 0x0; /* Persistence (unused) */
+ pram_ptr->sen_iaddr1 = 0x0; /* Individual Address Filter 1 (unused) */
+ pram_ptr->sen_iaddr2 = 0x0; /* Individual Address Filter 2 (unused) */
+ pram_ptr->sen_iaddr3 = 0x0; /* Individual Address Filter 3 (unused) */
+ pram_ptr->sen_iaddr4 = 0x0; /* Individual Address Filter 4 (unused) */
+ pram_ptr->sen_taddrh = 0x0; /* Tmp Address (MSB) (unused) */
+ pram_ptr->sen_taddrm = 0x0; /* Tmp Address (unused) */
+ pram_ptr->sen_taddrl = 0x0; /* Tmp Address (LSB) (unused) */
+
+ /*
+ * Enter Command: Initialize Tx Params for SCC
+ */
+
+ do { /* Spin until ready to issue command */
+ __asm__ ("eieio");
+ } while (immr->im_cpm.cp_cpcr & CPM_CR_FLG);
+ /* Issue command */
+ immr->im_cpm.cp_cpcr =
+ ((CPM_CR_INIT_TX << 8) | (cpm_cr[scc_index] << 4) |
+ CPM_CR_FLG);
+ do { /* Spin until command processed */
+ __asm__ ("eieio");
+ } while (immr->im_cpm.cp_cpcr & CPM_CR_FLG);
+
+ /*
+ * Mask all Events in SCCM - we use polling mode
+ */
+ immr->im_cpm.cp_scc[scc_index].scc_sccm = 0;
+
+ /*
+ * Clear Events in SCCE -- Clear bits by writing 1's
+ */
+
+ immr->im_cpm.cp_scc[scc_index].scc_scce = ~(0x0);
+
+
+ /*
+ * Initialize GSMR High 32-Bits
+ * Settings: Normal Mode
+ */
+
+ immr->im_cpm.cp_scc[scc_index].scc_gsmrh = 0;
+
+ /*
+ * Initialize GSMR Low 32-Bits, but do not Enable Transmit/Receive
+ * Settings:
+ * TCI = Invert
+ * TPL = 48 bits
+ * TPP = Repeating 10's
+ * LOOP = Loopback
+ * MODE = Ethernet
+ */
+
+ immr->im_cpm.cp_scc[scc_index].scc_gsmrl = (SCC_GSMRL_TCI |
+ SCC_GSMRL_TPL_48 |
+ SCC_GSMRL_TPP_10 |
+ SCC_GSMRL_DIAG_LOOP |
+ SCC_GSMRL_MODE_ENET);
+
+ /*
+ * Initialize the DSR -- see section 13.14.4 (pg. 513) v0.4
+ */
+
+ immr->im_cpm.cp_scc[scc_index].scc_dsr = 0xd555;
+
+ /*
+ * Initialize the PSMR
+ * Settings:
+ * CRC = 32-Bit CCITT
+ * NIB = Begin searching for SFD 22 bits after RENA
+ * LPB = Loopback Enable (Needed when FDE is set)
+ */
+ immr->im_cpm.cp_scc[scc_index].scc_psmr = SCC_PSMR_ENCRC |
+ SCC_PSMR_NIB22 | SCC_PSMR_LPB;
+
+#if 0
+ /*
+ * Configure Ethernet TENA Signal
+ */
+
+#if (defined(PC_ENET_TENA) && !defined(PB_ENET_TENA))
+ immr->im_ioport.iop_pcpar |= PC_ENET_TENA;
+ immr->im_ioport.iop_pcdir &= ~PC_ENET_TENA;
+#elif (defined(PB_ENET_TENA) && !defined(PC_ENET_TENA))
+ immr->im_cpm.cp_pbpar |= PB_ENET_TENA;
+ immr->im_cpm.cp_pbdir |= PB_ENET_TENA;
+#else
+#error Configuration Error: exactly ONE of PB_ENET_TENA, PC_ENET_TENA must be defined
+#endif
+
+#if defined(CONFIG_ADS) && defined(CONFIG_MPC860)
+ /*
+ * Port C is used to control the PHY,MC68160.
+ */
+ immr->im_ioport.iop_pcdir |=
+ (PC_ENET_ETHLOOP | PC_ENET_TPFLDL | PC_ENET_TPSQEL);
+
+ immr->im_ioport.iop_pcdat |= PC_ENET_TPFLDL;
+ immr->im_ioport.iop_pcdat &= ~(PC_ENET_ETHLOOP | PC_ENET_TPSQEL);
+ *((uint *) BCSR1) &= ~BCSR1_ETHEN;
+#endif /* MPC860ADS */
+
+#if defined(CONFIG_AMX860)
+ /*
+ * Port B is used to control the PHY,MC68160.
+ */
+ immr->im_cpm.cp_pbdir |=
+ (PB_ENET_ETHLOOP | PB_ENET_TPFLDL | PB_ENET_TPSQEL);
+
+ immr->im_cpm.cp_pbdat |= PB_ENET_TPFLDL;
+ immr->im_cpm.cp_pbdat &= ~(PB_ENET_ETHLOOP | PB_ENET_TPSQEL);
+
+ immr->im_ioport.iop_pddir |= PD_ENET_ETH_EN;
+ immr->im_ioport.iop_pddat &= ~PD_ENET_ETH_EN;
+#endif /* AMX860 */
+
+#endif /* 0 */
+
+#ifdef CONFIG_RPXCLASSIC
+ *((uchar *) BCSR0) &= ~BCSR0_ETHLPBK;
+ *((uchar *) BCSR0) |= (BCSR0_ETHEN | BCSR0_COLTEST | BCSR0_FULLDPLX);
+#endif
+
+#ifdef CONFIG_RPXLITE
+ *((uchar *) BCSR0) |= BCSR0_ETHEN;
+#endif
+
+#ifdef CONFIG_MBX
+ board_ether_init ();
+#endif
+
+ /*
+ * Set the ENT/ENR bits in the GSMR Low -- Enable Transmit/Receive
+ */
+
+ immr->im_cpm.cp_scc[scc_index].scc_gsmrl |=
+ (SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+
+ /*
+ * Work around transmit problem with first eth packet
+ */
+#if defined (CONFIG_FADS)
+ udelay (10000); /* wait 10 ms */
+#elif defined (CONFIG_AMX860) || defined(CONFIG_RPXCLASSIC)
+ udelay (100000); /* wait 100 ms */
+#endif
+}
+
+static void scc_halt (int scc_index)
+{
+ volatile immap_t *immr = (immap_t *) CFG_IMMR;
+
+ immr->im_cpm.cp_scc[scc_index].scc_gsmrl &=
+ ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+ immr->im_ioport.iop_pcso &= ~(PC_ENET_CLSN | PC_ENET_RENA);
+}
+
+static int scc_send (int index, volatile void *packet, int length)
+{
+ int i, j = 0;
+
+ while ((rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY) && (j < TOUT_LOOP)) {
+ udelay (1); /* will also trigger Wd if needed */
+ j++;
+ }
+ if (j >= TOUT_LOOP)
+ printf ("TX not ready\n");
+ rtx->txbd[txIdx].cbd_bufaddr = (uint) packet;
+ rtx->txbd[txIdx].cbd_datlen = length;
+ rtx->txbd[txIdx].cbd_sc |=
+ (BD_ENET_TX_READY | BD_ENET_TX_LAST | BD_ENET_TX_WRAP);
+ while ((rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY) && (j < TOUT_LOOP)) {
+ udelay (1); /* will also trigger Wd if needed */
+ j++;
+ }
+ if (j >= TOUT_LOOP)
+ printf ("TX timeout\n");
+ i = (rtx->txbd[txIdx].
+ cbd_sc & BD_ENET_TX_STATS) /* return only status bits */ ;
+ return i;
+}
+
+static int scc_recv (int index, void *packet, int max_length)
+{
+ int length = -1;
+
+ if (rtx->rxbd[rxIdx].cbd_sc & BD_ENET_RX_EMPTY) {
+ goto Done; /* nothing received */
+ }
+
+ if (!(rtx->rxbd[rxIdx].cbd_sc & 0x003f)) {
+ length = rtx->rxbd[rxIdx].cbd_datlen - 4;
+ memcpy (packet,
+ (void *) (NetRxPackets[rxIdx]),
+ length < max_length ? length : max_length);
+ }
+
+ /* Give the buffer back to the SCC. */
+ rtx->rxbd[rxIdx].cbd_datlen = 0;
+
+ /* wrap around buffer index when necessary */
+ if ((rxIdx + 1) >= PKTBUFSRX) {
+ rtx->rxbd[PKTBUFSRX - 1].cbd_sc =
+ (BD_ENET_RX_WRAP | BD_ENET_RX_EMPTY);
+ rxIdx = 0;
+ } else {
+ rtx->rxbd[rxIdx].cbd_sc = BD_ENET_RX_EMPTY;
+ rxIdx++;
+ }
+
+Done:
+ return length;
+}
+
+ /*
+ * Test routines
+ */
+
+static void packet_fill (char *packet, int length)
+{
+ char c = (char) length;
+ int i;
+
+ packet[0] = 0xFF;
+ packet[1] = 0xFF;
+ packet[2] = 0xFF;
+ packet[3] = 0xFF;
+ packet[4] = 0xFF;
+ packet[5] = 0xFF;
+
+ for (i = 6; i < length; i++) {
+ packet[i] = c++;
+ }
+}
+
+static int packet_check (char *packet, int length)
+{
+ char c = (char) length;
+ int i;
+
+ for (i = 6; i < length; i++) {
+ if (packet[i] != c++)
+ return -1;
+ }
+
+ return 0;
+}
+
+static int test_ctlr (int ctlr, int index)
+{
+ int res = -1;
+ char packet_send[MAX_PACKET_LENGTH];
+ char packet_recv[MAX_PACKET_LENGTH];
+ int length;
+ int i;
+ int l;
+
+ ctlr_proc[ctlr].init (index);
+
+ for (i = 0; i < TEST_NUM; i++) {
+ for (l = MIN_PACKET_LENGTH; l <= MAX_PACKET_LENGTH; l++) {
+ packet_fill (packet_send, l);
+
+ ctlr_proc[ctlr].send (index, packet_send, l);
+
+ length = ctlr_proc[ctlr].recv (index, packet_recv,
+ MAX_PACKET_LENGTH);
+
+ if (length != l || packet_check (packet_recv, length) < 0) {
+ goto Done;
+ }
+ }
+ }
+
+ res = 0;
+
+Done:
+
+ ctlr_proc[ctlr].halt (index);
+
+ /*
+ * SCC2 Ethernet parameter RAM space overlaps
+ * the SPI parameter RAM space. So we need to restore
+ * the SPI configuration after SCC2 ethernet test.
+ */
+#if defined(CONFIG_SPI)
+ if (ctlr == CTLR_SCC && index == 1) {
+ spi_init_f ();
+ spi_init_r ();
+ }
+#endif
+
+ if (res != 0) {
+ post_log ("ethernet %s%d test failed\n", ctlr_name[ctlr],
+ index + 1);
+ }
+
+ return res;
+}
+
+int ether_post_test (int flags)
+{
+ int res = 0;
+ int i;
+
+ ctlr_proc[CTLR_SCC].init = scc_init;
+ ctlr_proc[CTLR_SCC].halt = scc_halt;
+ ctlr_proc[CTLR_SCC].send = scc_send;
+ ctlr_proc[CTLR_SCC].recv = scc_recv;
+
+ for (i = 0; i < CTRL_LIST_SIZE; i++) {
+ if (test_ctlr (ctlr_list[i][0], ctlr_list[i][1]) != 0) {
+ res = -1;
+ }
+ }
+
+#if !defined(CONFIG_8xx_CONS_NONE)
+ serial_reinit_all ();
+#endif
+ return res;
+}
+
+#endif /* CONFIG_POST & CFG_POST_ETHER */
+
+#endif /* CONFIG_POST */