Merge git://git.denx.de/u-boot-nand-flash
diff --git a/arch/arm/include/asm/imx-common/regs-bch.h b/arch/arm/include/asm/imx-common/regs-bch.h
index a33d341..5c47783 100644
--- a/arch/arm/include/asm/imx-common/regs-bch.h
+++ b/arch/arm/include/asm/imx-common/regs-bch.h
@@ -148,6 +148,7 @@
#define BCH_FLASHLAYOUT0_ECC0_ECC30 (0xf << 12)
#define BCH_FLASHLAYOUT0_ECC0_ECC32 (0x10 << 12)
#define BCH_FLASHLAYOUT0_GF13_0_GF14_1 (1 << 10)
+#define BCH_FLASHLAYOUT0_GF13_0_GF14_1_OFFSET 10
#define BCH_FLASHLAYOUT0_DATA0_SIZE_MASK 0xfff
#define BCH_FLASHLAYOUT0_DATA0_SIZE_OFFSET 0
@@ -178,6 +179,7 @@
#define BCH_FLASHLAYOUT1_ECCN_ECC30 (0xf << 12)
#define BCH_FLASHLAYOUT1_ECCN_ECC32 (0x10 << 12)
#define BCH_FLASHLAYOUT1_GF13_0_GF14_1 (1 << 10)
+#define BCH_FLASHLAYOUT1_GF13_0_GF14_1_OFFSET 10
#define BCH_FLASHLAYOUT1_DATAN_SIZE_MASK 0xfff
#define BCH_FLASHLAYOUT1_DATAN_SIZE_OFFSET 0
diff --git a/configs/db-mv784mp-gp_defconfig b/configs/db-mv784mp-gp_defconfig
index d11377f..c9859a8 100644
--- a/configs/db-mv784mp-gp_defconfig
+++ b/configs/db-mv784mp-gp_defconfig
@@ -4,4 +4,5 @@
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_SETEXPR is not set
+CONFIG_NAND_PXA3XX=y
CONFIG_SPI_FLASH=y
diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c
index cb27ff2..2f2172b 100644
--- a/drivers/mtd/mtdcore.c
+++ b/drivers/mtd/mtdcore.c
@@ -1125,12 +1125,22 @@
}
EXPORT_SYMBOL_GPL(mtd_is_locked);
-int mtd_block_isbad(struct mtd_info *mtd, loff_t ofs)
+int mtd_block_isreserved(struct mtd_info *mtd, loff_t ofs)
{
- if (!mtd->_block_isbad)
- return 0;
if (ofs < 0 || ofs > mtd->size)
return -EINVAL;
+ if (!mtd->_block_isreserved)
+ return 0;
+ return mtd->_block_isreserved(mtd, ofs);
+}
+EXPORT_SYMBOL_GPL(mtd_block_isreserved);
+
+int mtd_block_isbad(struct mtd_info *mtd, loff_t ofs)
+{
+ if (ofs < 0 || ofs > mtd->size)
+ return -EINVAL;
+ if (!mtd->_block_isbad)
+ return 0;
return mtd->_block_isbad(mtd, ofs);
}
EXPORT_SYMBOL_GPL(mtd_block_isbad);
diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c
index cfbaa3d..cddfb16 100644
--- a/drivers/mtd/mtdpart.c
+++ b/drivers/mtd/mtdpart.c
@@ -321,6 +321,13 @@
}
#endif
+static int part_block_isreserved(struct mtd_info *mtd, loff_t ofs)
+{
+ struct mtd_part *part = PART(mtd);
+ ofs += part->offset;
+ return part->master->_block_isreserved(part->master, ofs);
+}
+
static int part_block_isbad(struct mtd_info *mtd, loff_t ofs)
{
struct mtd_part *part = PART(mtd);
@@ -459,6 +466,8 @@
slave->mtd._unlock = part_unlock;
if (master->_is_locked)
slave->mtd._is_locked = part_is_locked;
+ if (master->_block_isreserved)
+ slave->mtd._block_isreserved = part_block_isreserved;
if (master->_block_isbad)
slave->mtd._block_isbad = part_block_isbad;
if (master->_block_markbad)
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 41ebfea..b6dfb0e 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -56,6 +56,13 @@
endchoice
+config NAND_PXA3XX
+ bool "Support for NAND on PXA3xx and Armada 370/XP/38x"
+ select SYS_NAND_SELF_INIT
+ help
+ This enables the driver for the NAND flash device found on
+ PXA3xx processors (NFCv1) and also on Armada 370/XP (NFCv2).
+
comment "Generic NAND options"
# Enhance depends when converting drivers to Kconfig which use this config
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index 46dce72..64d1675 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -34,6 +34,7 @@
obj-y += nand_util.o
obj-y += nand_ecc.o
obj-y += nand_base.o
+obj-y += nand_timings.o
endif # not spl
@@ -61,6 +62,7 @@
obj-$(CONFIG_NAND_MXS) += mxs_nand.o
obj-$(CONFIG_NAND_NDFC) += ndfc.o
obj-$(CONFIG_NAND_NOMADIK) += nomadik.o
+obj-$(CONFIG_NAND_PXA3XX) += pxa3xx_nand.o
obj-$(CONFIG_NAND_S3C2410) += s3c2410_nand.o
obj-$(CONFIG_NAND_SPEAR) += spr_nand.o
obj-$(CONFIG_TEGRA_NAND) += tegra_nand.o
diff --git a/drivers/mtd/nand/atmel_nand_ecc.h b/drivers/mtd/nand/atmel_nand_ecc.h
index b2d2682..79e3994 100644
--- a/drivers/mtd/nand/atmel_nand_ecc.h
+++ b/drivers/mtd/nand/atmel_nand_ecc.h
@@ -170,4 +170,7 @@
#define PMECC_MAX_TIMEOUT_US (100 * 1000)
+/* Reserved bytes in oob area */
+#define PMECC_OOB_RESERVED_BYTES 2
+
#endif
diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c
index 9e0429a..192be7d 100644
--- a/drivers/mtd/nand/denali.c
+++ b/drivers/mtd/nand/denali.c
@@ -18,8 +18,10 @@
static int onfi_timing_mode = NAND_DEFAULT_TIMINGS;
-/* We define a macro here that combines all interrupts this driver uses into
- * a single constant value, for convenience. */
+/*
+ * We define a macro here that combines all interrupts this driver uses into
+ * a single constant value, for convenience.
+ */
#define DENALI_IRQ_ALL (INTR_STATUS__DMA_CMD_COMP | \
INTR_STATUS__ECC_TRANSACTION_DONE | \
INTR_STATUS__ECC_ERR | \
@@ -34,8 +36,10 @@
INTR_STATUS__INT_ACT | \
INTR_STATUS__LOCKED_BLK)
-/* indicates whether or not the internal value for the flash bank is
- * valid or not */
+/*
+ * indicates whether or not the internal value for the flash bank is
+ * valid or not
+ */
#define CHIP_SELECT_INVALID -1
#define SUPPORT_8BITECC 1
@@ -46,11 +50,14 @@
*/
#define mtd_to_denali(m) container_of(m->priv, struct denali_nand_info, nand)
-/* These constants are defined by the driver to enable common driver
- * configuration options. */
+/*
+ * These constants are defined by the driver to enable common driver
+ * configuration options.
+ */
#define SPARE_ACCESS 0x41
#define MAIN_ACCESS 0x42
#define MAIN_SPARE_ACCESS 0x43
+#define PIPELINE_ACCESS 0x2000
#define DENALI_UNLOCK_START 0x10
#define DENALI_UNLOCK_END 0x11
@@ -67,8 +74,10 @@
#define ADDR_CYCLE 1
#define STATUS_CYCLE 2
-/* this is a helper macro that allows us to
- * format the bank into the proper bits for the controller */
+/*
+ * this is a helper macro that allows us to
+ * format the bank into the proper bits for the controller
+ */
#define BANK(x) ((x) << 24)
/* Interrupts are cleared by writing a 1 to the appropriate status bit */
@@ -140,7 +149,7 @@
* read/write data. The operation is performed by writing the address value
* of the command to the device memory followed by the data. This function
* abstracts this common operation.
-*/
+ */
static void index_addr(struct denali_nand_info *denali,
uint32_t address, uint32_t data)
{
@@ -156,8 +165,10 @@
*pdata = readl(denali->flash_mem + INDEX_DATA_REG);
}
-/* We need to buffer some data for some of the NAND core routines.
- * The operations manage buffering that data. */
+/*
+ * We need to buffer some data for some of the NAND core routines.
+ * The operations manage buffering that data.
+ */
static void reset_buf(struct denali_nand_info *denali)
{
denali->buf.head = 0;
@@ -173,8 +184,7 @@
static void reset_bank(struct denali_nand_info *denali)
{
uint32_t irq_status;
- uint32_t irq_mask = INTR_STATUS__RST_COMP |
- INTR_STATUS__TIME_OUT;
+ uint32_t irq_mask = INTR_STATUS__RST_COMP | INTR_STATUS__TIME_OUT;
clear_interrupts(denali);
@@ -188,7 +198,7 @@
/* Reset the flash controller */
static uint32_t denali_nand_reset(struct denali_nand_info *denali)
{
- uint32_t i;
+ int i;
for (i = 0; i < denali->max_banks; i++)
writel(INTR_STATUS__RST_COMP | INTR_STATUS__TIME_OUT,
@@ -232,7 +242,6 @@
uint32_t twhr[6] = {120, 80, 80, 60, 60, 60};
uint32_t tcs[6] = {70, 35, 25, 25, 20, 15};
- uint32_t tclsrising = 1;
uint32_t data_invalid_rhoh, data_invalid_rloh, data_invalid;
uint32_t dv_window = 0;
uint32_t en_lo, en_hi;
@@ -256,9 +265,8 @@
data_invalid_rloh = (en_lo + en_hi) * CLK_X + trloh[mode];
- data_invalid =
- data_invalid_rhoh <
- data_invalid_rloh ? data_invalid_rhoh : data_invalid_rloh;
+ data_invalid = data_invalid_rhoh < data_invalid_rloh ?
+ data_invalid_rhoh : data_invalid_rloh;
dv_window = data_invalid - trea[mode];
@@ -268,10 +276,10 @@
acc_clks = DIV_ROUND_UP(trea[mode], CLK_X);
- while (((acc_clks * CLK_X) - trea[mode]) < 3)
+ while (acc_clks * CLK_X - trea[mode] < 3)
acc_clks++;
- if ((data_invalid - acc_clks * CLK_X) < 2)
+ if (data_invalid - acc_clks * CLK_X < 2)
debug("%s, Line %d: Warning!\n", __FILE__, __LINE__);
addr_2_data = DIV_ROUND_UP(tadl[mode], CLK_X);
@@ -279,19 +287,17 @@
re_2_re = DIV_ROUND_UP(trhz[mode], CLK_X);
we_2_re = DIV_ROUND_UP(twhr[mode], CLK_X);
cs_cnt = DIV_ROUND_UP((tcs[mode] - trp[mode]), CLK_X);
- if (!tclsrising)
- cs_cnt = DIV_ROUND_UP(tcs[mode], CLK_X);
if (cs_cnt == 0)
cs_cnt = 1;
if (tcea[mode]) {
- while (((cs_cnt * CLK_X) + trea[mode]) < tcea[mode])
+ while (cs_cnt * CLK_X + trea[mode] < tcea[mode])
cs_cnt++;
}
/* Sighting 3462430: Temporary hack for MT29F128G08CJABAWP:B */
- if ((readl(denali->flash_reg + MANUFACTURER_ID) == 0) &&
- (readl(denali->flash_reg + DEVICE_ID) == 0x88))
+ if (readl(denali->flash_reg + MANUFACTURER_ID) == 0 &&
+ readl(denali->flash_reg + DEVICE_ID) == 0x88)
acc_clks = 6;
writel(acc_clks, denali->flash_reg + ACC_CLKS);
@@ -308,6 +314,7 @@
static uint32_t get_onfi_nand_para(struct denali_nand_info *denali)
{
int i;
+
/*
* we needn't to do a reset here because driver has already
* reset all the banks before
@@ -324,8 +331,11 @@
nand_onfi_timing_set(denali, i);
- /* By now, all the ONFI devices we know support the page cache */
- /* rw feature. So here we enable the pipeline_rw_ahead feature */
+ /*
+ * By now, all the ONFI devices we know support the page cache
+ * rw feature. So here we enable the pipeline_rw_ahead feature
+ */
+
return 0;
}
@@ -348,8 +358,10 @@
{
uint32_t tmp;
- /* Workaround to fix a controller bug which reports a wrong */
- /* spare area size for some kind of Toshiba NAND device */
+ /*
+ * Workaround to fix a controller bug which reports a wrong
+ * spare area size for some kind of Toshiba NAND device
+ */
if ((readl(denali->flash_reg + DEVICE_MAIN_AREA_SIZE) == 4096) &&
(readl(denali->flash_reg + DEVICE_SPARE_AREA_SIZE) == 64)) {
writel(216, denali->flash_reg + DEVICE_SPARE_AREA_SIZE);
@@ -379,7 +391,7 @@
writel(0, denali->flash_reg + DEVICE_WIDTH);
break;
default:
- debug("Spectra: Unknown Hynix NAND (Device ID: 0x%x)."
+ debug("Spectra: Unknown Hynix NAND (Device ID: 0x%x).\n"
"Will use default parameter values instead.\n",
device_id);
}
@@ -396,11 +408,9 @@
denali->total_used_banks = 1;
for (i = 0; i < denali->max_banks; i++) {
- index_addr(denali, (uint32_t)(MODE_11 | (i << 24) | 0), 0x90);
- index_addr(denali, (uint32_t)(MODE_11 | (i << 24) | 1), 0);
- index_addr_read_data(denali,
- (uint32_t)(MODE_11 | (i << 24) | 2),
- &id[i]);
+ index_addr(denali, MODE_11 | (i << 24) | 0, 0x90);
+ index_addr(denali, MODE_11 | (i << 24) | 1, 0);
+ index_addr_read_data(denali, MODE_11 | (i << 24) | 2, &id[i]);
if (i == 0) {
if (!(id[i] & 0x0ff))
@@ -453,18 +463,19 @@
static uint32_t denali_nand_timing_set(struct denali_nand_info *denali)
{
- uint32_t id_bytes[5], addr;
- uint8_t i, maf_id, device_id;
+ uint32_t id_bytes[8], addr;
+ uint8_t maf_id, device_id;
+ int i;
- /* Use read id method to get device ID and other
- * params. For some NAND chips, controller can't
- * report the correct device ID by reading from
- * DEVICE_ID register
- * */
- addr = (uint32_t)MODE_11 | BANK(denali->flash_bank);
- index_addr(denali, (uint32_t)addr | 0, 0x90);
- index_addr(denali, (uint32_t)addr | 1, 0);
- for (i = 0; i < 5; i++)
+ /*
+ * Use read id method to get device ID and other params.
+ * For some NAND chips, controller can't report the correct
+ * device ID by reading from DEVICE_ID register
+ */
+ addr = MODE_11 | BANK(denali->flash_bank);
+ index_addr(denali, addr | 0, 0x90);
+ index_addr(denali, addr | 1, 0);
+ for (i = 0; i < 8; i++)
index_addr_read_data(denali, addr | 2, &id_bytes[i]);
maf_id = id_bytes[0];
device_id = id_bytes[1];
@@ -485,7 +496,8 @@
detect_partition_feature(denali);
- /* If the user specified to override the default timings
+ /*
+ * If the user specified to override the default timings
* with a specific ONFI mode, we apply those changes here.
*/
if (onfi_timing_mode != NAND_DEFAULT_TIMINGS)
@@ -494,7 +506,8 @@
return 0;
}
-/* validation function to verify that the controlling software is making
+/*
+ * validation function to verify that the controlling software is making
* a valid request
*/
static inline bool is_flash_bank_valid(int flash_bank)
@@ -504,7 +517,7 @@
static void denali_irq_init(struct denali_nand_info *denali)
{
- uint32_t int_mask = 0;
+ uint32_t int_mask;
int i;
/* Disable global interrupts */
@@ -519,12 +532,14 @@
denali_irq_enable(denali, int_mask);
}
-/* This helper function setups the registers for ECC and whether or not
- * the spare area will be transferred. */
+/*
+ * This helper function setups the registers for ECC and whether or not
+ * the spare area will be transferred.
+ */
static void setup_ecc_for_xfer(struct denali_nand_info *denali, bool ecc_en,
bool transfer_spare)
{
- int ecc_en_flag = 0, transfer_spare_flag = 0;
+ int ecc_en_flag, transfer_spare_flag;
/* set ECC, transfer spare bits if needed */
ecc_en_flag = ecc_en ? ECC_ENABLE__FLAG : 0;
@@ -536,19 +551,19 @@
writel(transfer_spare_flag, denali->flash_reg + TRANSFER_SPARE_REG);
}
-/* sends a pipeline command operation to the controller. See the Denali NAND
+/*
+ * sends a pipeline command operation to the controller. See the Denali NAND
* controller's user guide for more information (section 4.2.3.6).
*/
static int denali_send_pipeline_cmd(struct denali_nand_info *denali,
- bool ecc_en, bool transfer_spare,
- int access_type, int op)
+ bool ecc_en, bool transfer_spare,
+ int access_type, int op)
{
uint32_t addr, cmd, irq_status;
static uint32_t page_count = 1;
setup_ecc_for_xfer(denali, ecc_en, transfer_spare);
- /* clear interrupts */
clear_interrupts(denali);
addr = BANK(denali->flash_bank) | denali->page;
@@ -576,12 +591,15 @@
/* helper function that simply writes a buffer to the flash */
static int write_data_to_flash_mem(struct denali_nand_info *denali,
- const uint8_t *buf, int len)
+ const uint8_t *buf, int len)
{
- uint32_t i = 0, *buf32;
+ uint32_t *buf32;
+ int i;
- /* verify that the len is a multiple of 4. see comment in
- * read_data_from_flash_mem() */
+ /*
+ * verify that the len is a multiple of 4.
+ * see comment in read_data_from_flash_mem()
+ */
BUG_ON((len % 4) != 0);
/* write the data to the flash memory */
@@ -593,19 +611,17 @@
/* helper function that simply reads a buffer from the flash */
static int read_data_from_flash_mem(struct denali_nand_info *denali,
- uint8_t *buf, int len)
+ uint8_t *buf, int len)
{
- uint32_t i, *buf32;
+ uint32_t *buf32;
+ int i;
/*
- * we assume that len will be a multiple of 4, if not
- * it would be nice to know about it ASAP rather than
- * have random failures...
- * This assumption is based on the fact that this
- * function is designed to be used to read flash pages,
- * which are typically multiples of 4...
+ * we assume that len will be a multiple of 4, if not it would be nice
+ * to know about it ASAP rather than have random failures...
+ * This assumption is based on the fact that this function is designed
+ * to be used to read flash pages, which are typically multiples of 4.
*/
-
BUG_ON((len % 4) != 0);
/* transfer the data from the flash */
@@ -667,8 +683,8 @@
static void read_oob_data(struct mtd_info *mtd, uint8_t *buf, int page)
{
struct denali_nand_info *denali = mtd_to_denali(mtd);
- uint32_t irq_mask = INTR_STATUS__LOAD_COMP,
- irq_status = 0, addr = 0x0, cmd = 0x0;
+ uint32_t irq_mask = INTR_STATUS__LOAD_COMP;
+ uint32_t irq_status, addr, cmd;
denali->page = page;
@@ -676,15 +692,18 @@
DENALI_READ) == 0) {
read_data_from_flash_mem(denali, buf, mtd->oobsize);
- /* wait for command to be accepted
- * can always use status0 bit as the mask is identical for each
- * bank. */
+ /*
+ * wait for command to be accepted
+ * can always use status0 bit as the
+ * mask is identical for each bank.
+ */
irq_status = wait_for_irq(denali, irq_mask);
if (irq_status == 0)
printf("page on OOB timeout %d\n", denali->page);
- /* We set the device back to MAIN_ACCESS here as I observed
+ /*
+ * We set the device back to MAIN_ACCESS here as I observed
* instability with the controller if you do a block erase
* and the last transaction was a SPARE_ACCESS. Block erase
* is reliable (according to the MTD test infrastructure)
@@ -696,12 +715,14 @@
}
}
-/* this function examines buffers to see if they contain data that
+/*
+ * this function examines buffers to see if they contain data that
* indicate that the buffer is part of an erased region of flash.
*/
static bool is_erased(uint8_t *buf, int len)
{
- int i = 0;
+ int i;
+
for (i = 0; i < len; i++)
if (buf[i] != 0xFF)
return false;
@@ -711,12 +732,7 @@
/* programs the controller to either enable/disable DMA transfers */
static void denali_enable_dma(struct denali_nand_info *denali, bool en)
{
- uint32_t reg_val = 0x0;
-
- if (en)
- reg_val = DMA_ENABLE__FLAG;
-
- writel(reg_val, denali->flash_reg + DMA_ENABLE);
+ writel(en ? DMA_ENABLE__FLAG : 0, denali->flash_reg + DMA_ENABLE);
readl(denali->flash_reg + DMA_ENABLE);
}
@@ -753,12 +769,12 @@
index_addr(denali, mode | denali->page, 0x2000 | op | page_count);
/* 2. set memory high address bits 23:8 */
- index_addr(denali, mode | ((uint32_t)(addr >> 16) << 8), 0x2200);
+ index_addr(denali, mode | ((addr >> 16) << 8), 0x2200);
/* 3. set memory low address bits 23:8 */
- index_addr(denali, mode | ((uint32_t)addr << 8), 0x2300);
+ index_addr(denali, mode | ((addr & 0xffff) << 8), 0x2300);
- /* 4. interrupt when complete, burst len = 64 bytes*/
+ /* 4. interrupt when complete, burst len = 64 bytes */
index_addr(denali, mode | 0x14000, 0x2400);
#endif
}
@@ -1018,17 +1034,18 @@
{
struct denali_nand_info *denali = mtd_to_denali(mtd);
int status = denali->status;
+
denali->status = 0;
return status;
}
-static void denali_erase(struct mtd_info *mtd, int page)
+static int denali_erase(struct mtd_info *mtd, int page)
{
struct denali_nand_info *denali = mtd_to_denali(mtd);
+
uint32_t cmd, irq_status;
- /* clear interrupts */
clear_interrupts(denali);
/* setup page read request for access type */
@@ -1041,9 +1058,9 @@
if (irq_status & INTR_STATUS__ERASE_FAIL ||
irq_status & INTR_STATUS__LOCKED_BLK)
- denali->status = NAND_STATUS_FAIL;
- else
- denali->status = 0;
+ return NAND_STATUS_FAIL;
+
+ return 0;
}
static void denali_cmdfunc(struct mtd_info *mtd, unsigned int cmd, int col,
@@ -1062,10 +1079,11 @@
case NAND_CMD_READID:
case NAND_CMD_PARAM:
reset_buf(denali);
- /* sometimes ManufactureId read from register is not right
+ /*
+ * sometimes ManufactureId read from register is not right
* e.g. some of Micron MT29F32G08QAA MLC NAND chips
* So here we send READID cmd to NAND insteand
- * */
+ */
addr = MODE_11 | BANK(denali->flash_bank);
index_addr(denali, addr | 0, cmd);
index_addr(denali, addr | 1, col & 0xFF);
@@ -1187,6 +1205,9 @@
denali->nand.ecc.mode = NAND_ECC_HW;
denali->nand.ecc.size = CONFIG_NAND_DENALI_ECC_SIZE;
+ /* no subpage writes on denali */
+ denali->nand.options |= NAND_NO_SUBPAGE_WRITE;
+
/*
* Tell driver the ecc strength. This register may be already set
* correctly. So we read this value out.
diff --git a/drivers/mtd/nand/denali.h b/drivers/mtd/nand/denali.h
index a258df0..93b5725 100644
--- a/drivers/mtd/nand/denali.h
+++ b/drivers/mtd/nand/denali.h
@@ -5,6 +5,9 @@
* SPDX-License-Identifier: GPL-2.0+
*/
+#ifndef __DENALI_H__
+#define __DENALI_H__
+
#include <linux/mtd/nand.h>
#define DEVICE_RESET 0x0
@@ -381,9 +384,6 @@
#define CUSTOM_CONF_PARAMS 0
-#ifndef _LLD_NAND_
-#define _LLD_NAND_
-
#define INDEX_CTRL_REG 0x0
#define INDEX_DATA_REG 0x10
@@ -463,4 +463,4 @@
uint32_t max_banks;
};
-#endif /*_LLD_NAND_*/
+#endif /* __DENALI_H__ */
diff --git a/drivers/mtd/nand/docg4.c b/drivers/mtd/nand/docg4.c
index b9121c3..c1c1ff8 100644
--- a/drivers/mtd/nand/docg4.c
+++ b/drivers/mtd/nand/docg4.c
@@ -717,7 +717,7 @@
return read_page(mtd, nand, buf, page, 1);
}
-static void docg4_erase_block(struct mtd_info *mtd, int page)
+static int docg4_erase_block(struct mtd_info *mtd, int page)
{
struct nand_chip *nand = mtd->priv;
struct docg4_priv *doc = nand->priv;
@@ -760,6 +760,8 @@
write_nop(docptr);
poll_status(docptr);
write_nop(docptr);
+
+ return nand->waitfunc(mtd, nand);
}
static int read_factory_bbt(struct mtd_info *mtd)
@@ -972,7 +974,7 @@
nand->read_buf = docg4_read_buf;
nand->write_buf = docg4_write_buf16;
nand->scan_bbt = nand_default_bbt;
- nand->erase_cmd = docg4_erase_block;
+ nand->erase = docg4_erase_block;
nand->ecc.read_page = docg4_read_page;
nand->ecc.write_page = docg4_write_page;
nand->ecc.read_page_raw = docg4_read_page_raw;
diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c
index b3a0edb..d457d53 100644
--- a/drivers/mtd/nand/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/fsl_elbc_nand.c
@@ -621,6 +621,19 @@
static struct fsl_elbc_ctrl *elbc_ctrl;
+/* ECC will be calculated automatically, and errors will be detected in
+ * waitfunc.
+ */
+static int fsl_elbc_write_subpage(struct mtd_info *mtd, struct nand_chip *chip,
+ uint32_t offset, uint32_t data_len,
+ const uint8_t *buf, int oob_required)
+{
+ fsl_elbc_write_buf(mtd, buf, mtd->writesize);
+ fsl_elbc_write_buf(mtd, chip->oob_poi, mtd->oobsize);
+
+ return 0;
+}
+
static void fsl_elbc_ctrl_init(void)
{
elbc_ctrl = kzalloc(sizeof(*elbc_ctrl), GFP_KERNEL);
@@ -710,6 +723,7 @@
nand->ecc.read_page = fsl_elbc_read_page;
nand->ecc.write_page = fsl_elbc_write_page;
+ nand->ecc.write_subpage = fsl_elbc_write_subpage;
priv->fmr = (15 << FMR_CWTO_SHIFT) | (2 << FMR_AL_SHIFT);
diff --git a/drivers/mtd/nand/fsl_ifc_nand.c b/drivers/mtd/nand/fsl_ifc_nand.c
index 79fa88b..975b0d4 100644
--- a/drivers/mtd/nand/fsl_ifc_nand.c
+++ b/drivers/mtd/nand/fsl_ifc_nand.c
@@ -47,7 +47,7 @@
/* device info */
struct fsl_ifc regs;
- uint8_t __iomem *addr; /* Address of assigned IFC buffer */
+ void __iomem *addr; /* Address of assigned IFC buffer */
unsigned int cs_nand; /* On which chipsel NAND is connected */
unsigned int page; /* Last page written to / read from */
unsigned int read_bytes; /* Number of bytes read during command */
@@ -577,8 +577,15 @@
fsl_ifc_run_command(mtd);
- /* Chip sometimes reporting write protect even when it's not */
- out_8(ctrl->addr, in_8(ctrl->addr) | NAND_STATUS_WP);
+ /*
+ * The chip always seems to report that it is
+ * write-protected, even when it is not.
+ */
+ if (chip->options & NAND_BUSWIDTH_16)
+ ifc_out16(ctrl->addr,
+ ifc_in16(ctrl->addr) | NAND_STATUS_WP);
+ else
+ out_8(ctrl->addr, in_8(ctrl->addr) | NAND_STATUS_WP);
return;
case NAND_CMD_RESET:
@@ -618,7 +625,7 @@
len = bufsize - ctrl->index;
}
- memcpy_toio(&ctrl->addr[ctrl->index], buf, len);
+ memcpy_toio(ctrl->addr + ctrl->index, buf, len);
ctrl->index += len;
}
@@ -631,11 +638,16 @@
struct nand_chip *chip = mtd->priv;
struct fsl_ifc_mtd *priv = chip->priv;
struct fsl_ifc_ctrl *ctrl = priv->ctrl;
+ unsigned int offset;
- /* If there are still bytes in the IFC buffer, then use the
- * next byte. */
- if (ctrl->index < ctrl->read_bytes)
- return in_8(&ctrl->addr[ctrl->index++]);
+ /*
+ * If there are still bytes in the IFC buffer, then use the
+ * next byte.
+ */
+ if (ctrl->index < ctrl->read_bytes) {
+ offset = ctrl->index++;
+ return in_8(ctrl->addr + offset);
+ }
printf("%s beyond end of buffer\n", __func__);
return ERR_BYTE;
@@ -657,8 +669,7 @@
* next byte.
*/
if (ctrl->index < ctrl->read_bytes) {
- data = ifc_in16((uint16_t *)&ctrl->
- addr[ctrl->index]);
+ data = ifc_in16(ctrl->addr + ctrl->index);
ctrl->index += 2;
return (uint8_t)data;
}
@@ -681,7 +692,7 @@
return;
avail = min((unsigned int)len, ctrl->read_bytes - ctrl->index);
- memcpy_fromio(buf, &ctrl->addr[ctrl->index], avail);
+ memcpy_fromio(buf, ctrl->addr + ctrl->index, avail);
ctrl->index += avail;
if (len > avail)
diff --git a/drivers/mtd/nand/mxs_nand.c b/drivers/mtd/nand/mxs_nand.c
index 9c144a2..1d68901 100644
--- a/drivers/mtd/nand/mxs_nand.c
+++ b/drivers/mtd/nand/mxs_nand.c
@@ -68,6 +68,8 @@
};
struct nand_ecclayout fake_ecc_layout;
+static int chunk_data_size = MXS_NAND_CHUNK_DATA_CHUNK_SIZE;
+static int galois_field = 13;
/*
* Cache management functions
@@ -130,12 +132,12 @@
static uint32_t mxs_nand_ecc_chunk_cnt(uint32_t page_data_size)
{
- return page_data_size / MXS_NAND_CHUNK_DATA_CHUNK_SIZE;
+ return page_data_size / chunk_data_size;
}
static uint32_t mxs_nand_ecc_size_in_bits(uint32_t ecc_strength)
{
- return ecc_strength * MXS_NAND_BITS_PER_ECC_LEVEL;
+ return ecc_strength * galois_field;
}
static uint32_t mxs_nand_aux_status_offset(void)
@@ -157,8 +159,8 @@
* (page oob size - meta data size) * (bits per byte)
*/
ecc_strength = ((page_oob_size - MXS_NAND_METADATA_SIZE) * 8)
- / (MXS_NAND_BITS_PER_ECC_LEVEL *
- mxs_nand_ecc_chunk_cnt(page_data_size));
+ / (galois_field *
+ mxs_nand_ecc_chunk_cnt(page_data_size));
return round_down(ecc_strength, 2);
}
@@ -173,7 +175,7 @@
uint32_t block_mark_chunk_bit_offset;
uint32_t block_mark_bit_offset;
- chunk_data_size_in_bits = MXS_NAND_CHUNK_DATA_CHUNK_SIZE * 8;
+ chunk_data_size_in_bits = chunk_data_size * 8;
chunk_ecc_size_in_bits = mxs_nand_ecc_size_in_bits(ecc_strength);
chunk_total_size_in_bits =
@@ -460,6 +462,9 @@
mxs_dma_desc_append(channel, d);
+ /* Invalidate caches */
+ mxs_nand_inval_data_buf(nand_info);
+
/* Execute the DMA chain. */
ret = mxs_dma_go(channel);
if (ret) {
@@ -626,6 +631,9 @@
mxs_dma_desc_append(channel, d);
+ /* Invalidate caches */
+ mxs_nand_inval_data_buf(nand_info);
+
/* Execute the DMA chain. */
ret = mxs_dma_go(channel);
if (ret) {
@@ -972,6 +980,16 @@
struct mxs_bch_regs *bch_regs = (struct mxs_bch_regs *)MXS_BCH_BASE;
uint32_t tmp;
+ if (mtd->oobsize > MXS_NAND_CHUNK_DATA_CHUNK_SIZE) {
+ galois_field = 14;
+ chunk_data_size = MXS_NAND_CHUNK_DATA_CHUNK_SIZE * 2;
+ }
+
+ if (mtd->oobsize > chunk_data_size) {
+ printf("Not support the NAND chips whose oob size is larger then %d bytes!\n", chunk_data_size);
+ return -EINVAL;
+ }
+
/* Configure BCH and set NFC geometry */
mxs_reset_block(&bch_regs->hw_bch_ctrl_reg);
@@ -981,16 +999,18 @@
tmp |= MXS_NAND_METADATA_SIZE << BCH_FLASHLAYOUT0_META_SIZE_OFFSET;
tmp |= (mxs_nand_get_ecc_strength(mtd->writesize, mtd->oobsize) >> 1)
<< BCH_FLASHLAYOUT0_ECC0_OFFSET;
- tmp |= MXS_NAND_CHUNK_DATA_CHUNK_SIZE
- >> MXS_NAND_CHUNK_DATA_CHUNK_SIZE_SHIFT;
+ tmp |= chunk_data_size >> MXS_NAND_CHUNK_DATA_CHUNK_SIZE_SHIFT;
+ tmp |= (14 == galois_field ? 1 : 0) <<
+ BCH_FLASHLAYOUT0_GF13_0_GF14_1_OFFSET;
writel(tmp, &bch_regs->hw_bch_flash0layout0);
tmp = (mtd->writesize + mtd->oobsize)
<< BCH_FLASHLAYOUT1_PAGE_SIZE_OFFSET;
tmp |= (mxs_nand_get_ecc_strength(mtd->writesize, mtd->oobsize) >> 1)
<< BCH_FLASHLAYOUT1_ECCN_OFFSET;
- tmp |= MXS_NAND_CHUNK_DATA_CHUNK_SIZE
- >> MXS_NAND_CHUNK_DATA_CHUNK_SIZE_SHIFT;
+ tmp |= chunk_data_size >> MXS_NAND_CHUNK_DATA_CHUNK_SIZE_SHIFT;
+ tmp |= (14 == galois_field ? 1 : 0) <<
+ BCH_FLASHLAYOUT1_GF13_0_GF14_1_OFFSET;
writel(tmp, &bch_regs->hw_bch_flash0layout1);
/* Set *all* chip selects to use layout 0 */
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index c0e381a..9e8fc1f 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -29,26 +29,6 @@
*
*/
-#ifndef __UBOOT__
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-#include <linux/types.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/nand_ecc.h>
-#include <linux/mtd/nand_bch.h>
-#include <linux/interrupt.h>
-#include <linux/bitops.h>
-#include <linux/leds.h>
-#include <linux/io.h>
-#include <linux/mtd/partitions.h>
-#else
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <common.h>
#include <malloc.h>
@@ -65,19 +45,7 @@
#include <asm/io.h>
#include <asm/errno.h>
-/*
- * CONFIG_SYS_NAND_RESET_CNT is used as a timeout mechanism when resetting
- * a flash. NAND flash is initialized prior to interrupts so standard timers
- * can't be used. CONFIG_SYS_NAND_RESET_CNT should be set to a value
- * which is greater than (max NAND reset time / NAND status read time).
- * A conservative default of 200000 (500 us / 25 ns) is used as a default.
- */
-#ifndef CONFIG_SYS_NAND_RESET_CNT
-#define CONFIG_SYS_NAND_RESET_CNT 200000
-#endif
-
static bool is_module_text_address(unsigned long addr) {return 0;}
-#endif
/* Define default oob placement schemes for large and small page devices */
static struct nand_ecclayout nand_oob_8 = {
@@ -165,17 +133,8 @@
{
struct nand_chip *chip = mtd->priv;
-#ifndef __UBOOT__
- /* Release the controller and the chip */
- spin_lock(&chip->controller->lock);
- chip->controller->active = NULL;
- chip->state = FL_READY;
- wake_up(&chip->controller->wq);
- spin_unlock(&chip->controller->lock);
-#else
/* De-select the NAND device */
chip->select_chip(mtd, -1);
-#endif
}
/**
@@ -184,11 +143,7 @@
*
* Default read function for 8bit buswidth
*/
-#ifndef __UBOOT__
-static uint8_t nand_read_byte(struct mtd_info *mtd)
-#else
uint8_t nand_read_byte(struct mtd_info *mtd)
-#endif
{
struct nand_chip *chip = mtd->priv;
return readb(chip->IO_ADDR_R);
@@ -196,7 +151,6 @@
/**
* nand_read_byte16 - [DEFAULT] read one byte endianness aware from the chip
- * nand_read_byte16 - [DEFAULT] read one byte endianness aware from the chip
* @mtd: MTD device structure
*
* Default read function for 16bit buswidth with endianness conversion.
@@ -288,7 +242,7 @@
chip->write_buf(mtd, (uint8_t *)&word, 2);
}
-#if defined(__UBOOT__) && !defined(CONFIG_BLACKFIN)
+#if !defined(CONFIG_BLACKFIN)
static void iowrite8_rep(void *addr, const uint8_t *buf, int len)
{
int i;
@@ -331,11 +285,7 @@
*
* Default write function for 8bit buswidth.
*/
-#ifndef __UBOOT__
-static void nand_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
-#else
void nand_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
-#endif
{
struct nand_chip *chip = mtd->priv;
@@ -350,11 +300,7 @@
*
* Default read function for 8bit buswidth.
*/
-#ifndef __UBOOT__
-static void nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
-#else
void nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
-#endif
{
struct nand_chip *chip = mtd->priv;
@@ -369,11 +315,7 @@
*
* Default write function for 16bit buswidth.
*/
-#ifndef __UBOOT__
-static void nand_write_buf16(struct mtd_info *mtd, const uint8_t *buf, int len)
-#else
void nand_write_buf16(struct mtd_info *mtd, const uint8_t *buf, int len)
-#endif
{
struct nand_chip *chip = mtd->priv;
u16 *p = (u16 *) buf;
@@ -389,11 +331,7 @@
*
* Default read function for 16bit buswidth.
*/
-#ifndef __UBOOT__
-static void nand_read_buf16(struct mtd_info *mtd, uint8_t *buf, int len)
-#else
void nand_read_buf16(struct mtd_info *mtd, uint8_t *buf, int len)
-#endif
{
struct nand_chip *chip = mtd->priv;
u16 *p = (u16 *) buf;
@@ -477,7 +415,7 @@
uint8_t buf[2] = { 0, 0 };
int ret = 0, res, i = 0;
- ops.datbuf = NULL;
+ memset(&ops, 0, sizeof(ops));
ops.oobbuf = buf;
ops.ooboffs = chip->badblockpos;
if (chip->options & NAND_BUSWIDTH_16) {
@@ -575,6 +513,23 @@
}
/**
+ * nand_block_isreserved - [GENERIC] Check if a block is marked reserved.
+ * @mtd: MTD device structure
+ * @ofs: offset from device start
+ *
+ * Check if the block is marked as reserved.
+ */
+static int nand_block_isreserved(struct mtd_info *mtd, loff_t ofs)
+{
+ struct nand_chip *chip = mtd->priv;
+
+ if (!chip->bbt)
+ return 0;
+ /* Return info from the table */
+ return nand_isreserved_bbt(mtd, ofs);
+}
+
+/**
* nand_block_checkbad - [GENERIC] Check if a block is marked bad
* @mtd: MTD device structure
* @ofs: offset from device start
@@ -602,50 +557,10 @@
return nand_isbad_bbt(mtd, ofs, allowbbt);
}
-#ifndef __UBOOT__
-/**
- * panic_nand_wait_ready - [GENERIC] Wait for the ready pin after commands.
- * @mtd: MTD device structure
- * @timeo: Timeout
- *
- * Helper function for nand_wait_ready used when needing to wait in interrupt
- * context.
- */
-static void panic_nand_wait_ready(struct mtd_info *mtd, unsigned long timeo)
-{
- struct nand_chip *chip = mtd->priv;
- int i;
-
- /* Wait for the device to get ready */
- for (i = 0; i < timeo; i++) {
- if (chip->dev_ready(mtd))
- break;
- touch_softlockup_watchdog();
- mdelay(1);
- }
-}
-#endif
-
/* Wait for the ready pin, after a command. The timeout is caught later. */
void nand_wait_ready(struct mtd_info *mtd)
{
struct nand_chip *chip = mtd->priv;
-#ifndef __UBOOT__
- unsigned long timeo = jiffies + msecs_to_jiffies(20);
-
- /* 400ms timeout */
- if (in_interrupt() || oops_in_progress)
- return panic_nand_wait_ready(mtd, 400);
-
- led_trigger_event(nand_led_trigger, LED_FULL);
- /* Wait until command is processed or timeout occurs */
- do {
- if (chip->dev_ready(mtd))
- break;
- touch_softlockup_watchdog();
- } while (time_before(jiffies, timeo));
- led_trigger_event(nand_led_trigger, LED_OFF);
-#else
u32 timeo = (CONFIG_SYS_HZ * 20) / 1000;
u32 time_start;
@@ -656,11 +571,31 @@
if (chip->dev_ready(mtd))
break;
}
-#endif
}
EXPORT_SYMBOL_GPL(nand_wait_ready);
/**
+ * nand_wait_status_ready - [GENERIC] Wait for the ready status after commands.
+ * @mtd: MTD device structure
+ * @timeo: Timeout in ms
+ *
+ * Wait for status ready (i.e. command done) or timeout.
+ */
+static void nand_wait_status_ready(struct mtd_info *mtd, unsigned long timeo)
+{
+ register struct nand_chip *chip = mtd->priv;
+ u32 time_start;
+
+ timeo = (CONFIG_SYS_HZ * timeo) / 1000;
+ time_start = get_timer(0);
+ while (get_timer(time_start) < timeo) {
+ if ((chip->read_byte(mtd) & NAND_STATUS_READY))
+ break;
+ WATCHDOG_RESET();
+ }
+};
+
+/**
* nand_command - [DEFAULT] Send command to NAND device
* @mtd: MTD device structure
* @command: the command to be sent
@@ -675,7 +610,6 @@
{
register struct nand_chip *chip = mtd->priv;
int ctrl = NAND_CTRL_CLE | NAND_CTRL_CHANGE;
- uint32_t rst_sts_cnt = CONFIG_SYS_NAND_RESET_CNT;
/* Write out the command to the device */
if (command == NAND_CMD_SEQIN) {
@@ -739,8 +673,8 @@
NAND_CTRL_CLE | NAND_CTRL_CHANGE);
chip->cmd_ctrl(mtd,
NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE);
- while (!(chip->read_byte(mtd) & NAND_STATUS_READY) &&
- (rst_sts_cnt--));
+ /* EZ-NAND can take upto 250ms as per ONFi v4.0 */
+ nand_wait_status_ready(mtd, 250);
return;
/* This applies to read commands */
@@ -778,7 +712,6 @@
int column, int page_addr)
{
register struct nand_chip *chip = mtd->priv;
- uint32_t rst_sts_cnt = CONFIG_SYS_NAND_RESET_CNT;
/* Emulate NAND_CMD_READOOB */
if (command == NAND_CMD_READOOB) {
@@ -816,7 +749,7 @@
/*
* Program and erase have their own busy handlers status, sequential
- * in, and deplete1 need no delay.
+ * in and status need no delay.
*/
switch (command) {
@@ -837,8 +770,8 @@
NAND_NCE | NAND_CLE | NAND_CTRL_CHANGE);
chip->cmd_ctrl(mtd, NAND_CMD_NONE,
NAND_NCE | NAND_CTRL_CHANGE);
- while (!(chip->read_byte(mtd) & NAND_STATUS_READY) &&
- (rst_sts_cnt--));
+ /* EZ-NAND can take upto 250ms as per ONFi v4.0 */
+ nand_wait_status_ready(mtd, 250);
return;
case NAND_CMD_RNDOUT:
@@ -903,39 +836,8 @@
nand_get_device(struct mtd_info *mtd, int new_state)
{
struct nand_chip *chip = mtd->priv;
-#ifndef __UBOOT__
- spinlock_t *lock = &chip->controller->lock;
- wait_queue_head_t *wq = &chip->controller->wq;
- DECLARE_WAITQUEUE(wait, current);
-retry:
- spin_lock(lock);
-
- /* Hardware controller shared among independent devices */
- if (!chip->controller->active)
- chip->controller->active = chip;
-
- if (chip->controller->active == chip && chip->state == FL_READY) {
- chip->state = new_state;
- spin_unlock(lock);
- return 0;
- }
- if (new_state == FL_PM_SUSPENDED) {
- if (chip->controller->active->state == FL_PM_SUSPENDED) {
- chip->state = FL_PM_SUSPENDED;
- spin_unlock(lock);
- return 0;
- }
- }
- set_current_state(TASK_UNINTERRUPTIBLE);
- add_wait_queue(wq, &wait);
- spin_unlock(lock);
- schedule();
- remove_wait_queue(wq, &wait);
- goto retry;
-#else
chip->state = new_state;
return 0;
-#endif
}
/**
@@ -989,23 +891,6 @@
chip->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1);
-#ifndef __UBOOT__
- if (in_interrupt() || oops_in_progress)
- panic_nand_wait(mtd, chip, timeo);
- else {
- timeo = jiffies + msecs_to_jiffies(timeo);
- while (time_before(jiffies, timeo)) {
- if (chip->dev_ready) {
- if (chip->dev_ready(mtd))
- break;
- } else {
- if (chip->read_byte(mtd) & NAND_STATUS_READY)
- break;
- }
- cond_resched();
- }
- }
-#else
u32 timer = (CONFIG_SYS_HZ * timeo) / 1000;
u32 time_start;
@@ -1019,7 +904,6 @@
break;
}
}
-#endif
led_trigger_event(nand_led_trigger, LED_OFF);
status = (int)chip->read_byte(mtd);
@@ -1028,162 +912,6 @@
return status;
}
-#ifndef __UBOOT__
-/**
- * __nand_unlock - [REPLACEABLE] unlocks specified locked blocks
- * @mtd: mtd info
- * @ofs: offset to start unlock from
- * @len: length to unlock
- * @invert: when = 0, unlock the range of blocks within the lower and
- * upper boundary address
- * when = 1, unlock the range of blocks outside the boundaries
- * of the lower and upper boundary address
- *
- * Returs unlock status.
- */
-static int __nand_unlock(struct mtd_info *mtd, loff_t ofs,
- uint64_t len, int invert)
-{
- int ret = 0;
- int status, page;
- struct nand_chip *chip = mtd->priv;
-
- /* Submit address of first page to unlock */
- page = ofs >> chip->page_shift;
- chip->cmdfunc(mtd, NAND_CMD_UNLOCK1, -1, page & chip->pagemask);
-
- /* Submit address of last page to unlock */
- page = (ofs + len) >> chip->page_shift;
- chip->cmdfunc(mtd, NAND_CMD_UNLOCK2, -1,
- (page | invert) & chip->pagemask);
-
- /* Call wait ready function */
- status = chip->waitfunc(mtd, chip);
- /* See if device thinks it succeeded */
- if (status & NAND_STATUS_FAIL) {
- pr_debug("%s: error status = 0x%08x\n",
- __func__, status);
- ret = -EIO;
- }
-
- return ret;
-}
-
-/**
- * nand_unlock - [REPLACEABLE] unlocks specified locked blocks
- * @mtd: mtd info
- * @ofs: offset to start unlock from
- * @len: length to unlock
- *
- * Returns unlock status.
- */
-int nand_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
-{
- int ret = 0;
- int chipnr;
- struct nand_chip *chip = mtd->priv;
-
- pr_debug("%s: start = 0x%012llx, len = %llu\n",
- __func__, (unsigned long long)ofs, len);
-
- if (check_offs_len(mtd, ofs, len))
- ret = -EINVAL;
-
- /* Align to last block address if size addresses end of the device */
- if (ofs + len == mtd->size)
- len -= mtd->erasesize;
-
- nand_get_device(mtd, FL_UNLOCKING);
-
- /* Shift to get chip number */
- chipnr = ofs >> chip->chip_shift;
-
- chip->select_chip(mtd, chipnr);
-
- /* Check, if it is write protected */
- if (nand_check_wp(mtd)) {
- pr_debug("%s: device is write protected!\n",
- __func__);
- ret = -EIO;
- goto out;
- }
-
- ret = __nand_unlock(mtd, ofs, len, 0);
-
-out:
- chip->select_chip(mtd, -1);
- nand_release_device(mtd);
-
- return ret;
-}
-EXPORT_SYMBOL(nand_unlock);
-
-/**
- * nand_lock - [REPLACEABLE] locks all blocks present in the device
- * @mtd: mtd info
- * @ofs: offset to start unlock from
- * @len: length to unlock
- *
- * This feature is not supported in many NAND parts. 'Micron' NAND parts do
- * have this feature, but it allows only to lock all blocks, not for specified
- * range for block. Implementing 'lock' feature by making use of 'unlock', for
- * now.
- *
- * Returns lock status.
- */
-int nand_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
-{
- int ret = 0;
- int chipnr, status, page;
- struct nand_chip *chip = mtd->priv;
-
- pr_debug("%s: start = 0x%012llx, len = %llu\n",
- __func__, (unsigned long long)ofs, len);
-
- if (check_offs_len(mtd, ofs, len))
- ret = -EINVAL;
-
- nand_get_device(mtd, FL_LOCKING);
-
- /* Shift to get chip number */
- chipnr = ofs >> chip->chip_shift;
-
- chip->select_chip(mtd, chipnr);
-
- /* Check, if it is write protected */
- if (nand_check_wp(mtd)) {
- pr_debug("%s: device is write protected!\n",
- __func__);
- status = MTD_ERASE_FAILED;
- ret = -EIO;
- goto out;
- }
-
- /* Submit address of first page to lock */
- page = ofs >> chip->page_shift;
- chip->cmdfunc(mtd, NAND_CMD_LOCK, -1, page & chip->pagemask);
-
- /* Call wait ready function */
- status = chip->waitfunc(mtd, chip);
- /* See if device thinks it succeeded */
- if (status & NAND_STATUS_FAIL) {
- pr_debug("%s: error status = 0x%08x\n",
- __func__, status);
- ret = -EIO;
- goto out;
- }
-
- ret = __nand_unlock(mtd, ofs, len, 0x1);
-
-out:
- chip->select_chip(mtd, -1);
- nand_release_device(mtd);
-
- return ret;
-}
-EXPORT_SYMBOL(nand_lock);
-#endif
-
/**
* nand_read_page_raw - [INTERN] read raw page data without ecc
* @mtd: mtd info structure
@@ -1341,8 +1069,7 @@
* ecc.pos. Let's make sure that there are no gaps in ECC positions.
*/
for (i = 0; i < eccfrag_len - 1; i++) {
- if (eccpos[i + start_step * chip->ecc.bytes] + 1 !=
- eccpos[i + start_step * chip->ecc.bytes + 1]) {
+ if (eccpos[i + index] + 1 != eccpos[i + index + 1]) {
gaps = 1;
break;
}
@@ -1638,6 +1365,7 @@
mtd->oobavail : mtd->oobsize;
uint8_t *bufpoi, *oob, *buf;
+ int use_bufpoi;
unsigned int max_bitflips = 0;
int retry_mode = 0;
bool ecc_fail = false;
@@ -1661,9 +1389,18 @@
bytes = min(mtd->writesize - col, readlen);
aligned = (bytes == mtd->writesize);
+ if (!aligned)
+ use_bufpoi = 1;
+ else
+ use_bufpoi = 0;
+
/* Is the current page in the buffer? */
if (realpage != chip->pagebuf || oob) {
- bufpoi = aligned ? buf : chip->buffers->databuf;
+ bufpoi = use_bufpoi ? chip->buffers->databuf : buf;
+
+ if (use_bufpoi && aligned)
+ pr_debug("%s: using read bounce buffer for buf@%p\n",
+ __func__, buf);
read_retry:
chip->cmdfunc(mtd, NAND_CMD_READ0, 0x00, page);
@@ -1685,7 +1422,7 @@
ret = chip->ecc.read_page(mtd, chip, bufpoi,
oob_required, page);
if (ret < 0) {
- if (!aligned)
+ if (use_bufpoi)
/* Invalidate page cache */
chip->pagebuf = -1;
break;
@@ -1694,7 +1431,7 @@
max_bitflips = max_t(unsigned int, max_bitflips, ret);
/* Transfer not aligned data */
- if (!aligned) {
+ if (use_bufpoi) {
if (!NAND_HAS_SUBPAGE_READ(chip) && !oob &&
!(mtd->ecc_stats.failed - ecc_failures) &&
(ops->mode != MTD_OPS_RAW)) {
@@ -1808,9 +1545,9 @@
int ret;
nand_get_device(mtd, FL_READING);
+ memset(&ops, 0, sizeof(ops));
ops.len = len;
ops.datbuf = buf;
- ops.oobbuf = NULL;
ops.mode = MTD_OPS_PLACE_OOB;
ret = nand_do_read_ops(mtd, from, &ops);
*retlen = ops.retlen;
@@ -1842,11 +1579,10 @@
static int nand_read_oob_syndrome(struct mtd_info *mtd, struct nand_chip *chip,
int page)
{
- uint8_t *buf = chip->oob_poi;
int length = mtd->oobsize;
int chunk = chip->ecc.bytes + chip->ecc.prepad + chip->ecc.postpad;
int eccsize = chip->ecc.size;
- uint8_t *bufpoi = buf;
+ uint8_t *bufpoi = chip->oob_poi;
int i, toread, sndrnd = 0, pos;
chip->cmdfunc(mtd, NAND_CMD_READ0, chip->ecc.size, page);
@@ -2219,7 +1955,7 @@
/**
- * nand_write_subpage_hwecc - [REPLACABLE] hardware ECC based subpage write
+ * nand_write_subpage_hwecc - [REPLACEABLE] hardware ECC based subpage write
* @mtd: mtd info structure
* @chip: nand chip info structure
* @offset: column address of subpage within the page
@@ -2479,13 +2215,8 @@
if (!writelen)
return 0;
-#ifndef __UBOOT__
- /* Reject writes, which are not page aligned */
- if (NOTALIGNED(to) || NOTALIGNED(ops->len)) {
-#else
/* Reject writes, which are not page aligned */
if (NOTALIGNED(to)) {
-#endif
pr_notice("%s: attempt to write non page aligned data\n",
__func__);
return -EINVAL;
@@ -2507,8 +2238,8 @@
blockmask = (1 << (chip->phys_erase_shift - chip->page_shift)) - 1;
/* Invalidate the page cache, when we write to the cached page */
- if (to <= (chip->pagebuf << chip->page_shift) &&
- (chip->pagebuf << chip->page_shift) < (to + ops->len))
+ if (to <= ((loff_t)chip->pagebuf << chip->page_shift) &&
+ ((loff_t)chip->pagebuf << chip->page_shift) < (to + ops->len))
chip->pagebuf = -1;
/* Don't allow multipage oob writes with offset */
@@ -2521,12 +2252,22 @@
int bytes = mtd->writesize;
int cached = writelen > bytes && page != blockmask;
uint8_t *wbuf = buf;
+ int use_bufpoi;
+ int part_pagewr = (column || writelen < (mtd->writesize - 1));
+
+ if (part_pagewr)
+ use_bufpoi = 1;
+ else
+ use_bufpoi = 0;
WATCHDOG_RESET();
- /* Partial page write? */
- if (unlikely(column || writelen < (mtd->writesize - 1))) {
+ /* Partial page write?, or need to use bounce buffer */
+ if (use_bufpoi) {
+ pr_debug("%s: using write bounce buffer for buf@%p\n",
+ __func__, buf);
cached = 0;
- bytes = min_t(int, bytes - column, (int) writelen);
+ if (part_pagewr)
+ bytes = min_t(int, bytes - column, writelen);
chip->pagebuf = -1;
memset(chip->buffers->databuf, 0xff, mtd->writesize);
memcpy(&chip->buffers->databuf[column], buf, bytes);
@@ -2597,9 +2338,9 @@
/* Grab the device */
panic_nand_get_device(chip, mtd, FL_WRITING);
+ memset(&ops, 0, sizeof(ops));
ops.len = len;
ops.datbuf = (uint8_t *)buf;
- ops.oobbuf = NULL;
ops.mode = MTD_OPS_PLACE_OOB;
ret = nand_do_write_ops(mtd, to, &ops);
@@ -2625,9 +2366,9 @@
int ret;
nand_get_device(mtd, FL_WRITING);
+ memset(&ops, 0, sizeof(ops));
ops.len = len;
ops.datbuf = (uint8_t *)buf;
- ops.oobbuf = NULL;
ops.mode = MTD_OPS_PLACE_OOB;
ret = nand_do_write_ops(mtd, to, &ops);
*retlen = ops.retlen;
@@ -2764,18 +2505,20 @@
}
/**
- * single_erase_cmd - [GENERIC] NAND standard block erase command function
+ * single_erase - [GENERIC] NAND standard block erase command function
* @mtd: MTD device structure
* @page: the page address of the block which will be erased
*
- * Standard erase command for NAND chips.
+ * Standard erase command for NAND chips. Returns NAND status.
*/
-static void single_erase_cmd(struct mtd_info *mtd, int page)
+static int single_erase(struct mtd_info *mtd, int page)
{
struct nand_chip *chip = mtd->priv;
/* Send commands to erase a block */
chip->cmdfunc(mtd, NAND_CMD_ERASE1, -1, page);
chip->cmdfunc(mtd, NAND_CMD_ERASE2, -1, -1);
+
+ return chip->waitfunc(mtd, chip);
}
/**
@@ -2858,9 +2601,7 @@
(page + pages_per_block))
chip->pagebuf = -1;
- chip->erase_cmd(mtd, page & chip->pagemask);
-
- status = chip->waitfunc(mtd, chip);
+ status = chip->erase(mtd, page & chip->pagemask);
/*
* See if operation failed and additional status checks are
@@ -3013,32 +2754,6 @@
return 0;
}
-#ifndef __UBOOT__
-/**
- * nand_suspend - [MTD Interface] Suspend the NAND flash
- * @mtd: MTD device structure
- */
-static int nand_suspend(struct mtd_info *mtd)
-{
- return nand_get_device(mtd, FL_PM_SUSPENDED);
-}
-
-/**
- * nand_resume - [MTD Interface] Resume the NAND flash
- * @mtd: MTD device structure
- */
-static void nand_resume(struct mtd_info *mtd)
-{
- struct nand_chip *chip = mtd->priv;
-
- if (chip->state == FL_PM_SUSPENDED)
- nand_release_device(mtd);
- else
- pr_err("%s called for a chip which is not in suspended state\n",
- __func__);
-}
-#endif
-
/* Set default functions */
static void nand_set_defaults(struct nand_chip *chip, int busw)
{
@@ -3090,11 +2805,7 @@
}
/* Sanitize ONFI strings so we can safely print them */
-#ifndef __UBOOT__
-static void sanitize_string(uint8_t *s, size_t len)
-#else
static void sanitize_string(char *s, size_t len)
-#endif
{
ssize_t i;
@@ -3160,11 +2871,7 @@
* Check the signature.
* Do not strictly follow the ONFI spec, maybe changed in future.
*/
-#ifndef __UBOOT__
- if (strncmp(ep->sig, "EPPS", 4)) {
-#else
if (strncmp((char *)ep->sig, "EPPS", 4)) {
-#endif
pr_debug("The signature is invalid.\n");
goto ext_out;
}
@@ -3695,11 +3402,7 @@
static bool find_full_id_nand(struct mtd_info *mtd, struct nand_chip *chip,
struct nand_flash_dev *type, u8 *id_data, int *busw)
{
-#ifndef __UBOOT__
- if (!strncmp(type->id, id_data, type->id_len)) {
-#else
if (!strncmp((char *)type->id, (char *)id_data, type->id_len)) {
-#endif
mtd->writesize = type->pagesize;
mtd->erasesize = type->erasesize;
mtd->oobsize = type->oobsize;
@@ -3709,6 +3412,8 @@
chip->options |= type->options;
chip->ecc_strength_ds = NAND_ECC_STRENGTH(type);
chip->ecc_step_ds = NAND_ECC_STEP(type);
+ chip->onfi_timing_mode_default =
+ type->onfi_timing_mode_default;
*busw = type->options & NAND_BUSWIDTH_16;
@@ -3781,7 +3486,7 @@
chip->onfi_version = 0;
if (!type->name || !type->pagesize) {
- /* Check is chip is ONFI compliant */
+ /* Check if the chip is ONFI compliant */
if (nand_flash_detect_onfi(mtd, chip, &busw))
goto ident_done;
@@ -3859,7 +3564,7 @@
}
chip->badblockbits = 8;
- chip->erase_cmd = single_erase_cmd;
+ chip->erase = single_erase;
/* Do not replace user supplied command function! */
if (mtd->writesize > 512 && chip->cmdfunc == nand_command)
@@ -3890,9 +3595,9 @@
type->name);
#endif
- pr_info("%dMiB, %s, page size: %d, OOB size: %d\n",
+ pr_info("%d MiB, %s, erase size: %d KiB, page size: %d, OOB size: %d\n",
(int)(chip->chipsize >> 20), nand_is_slc(chip) ? "SLC" : "MLC",
- mtd->writesize, mtd->oobsize);
+ mtd->erasesize >> 10, mtd->writesize, mtd->oobsize);
return type;
}
@@ -3959,6 +3664,39 @@
}
EXPORT_SYMBOL(nand_scan_ident);
+/*
+ * Check if the chip configuration meet the datasheet requirements.
+
+ * If our configuration corrects A bits per B bytes and the minimum
+ * required correction level is X bits per Y bytes, then we must ensure
+ * both of the following are true:
+ *
+ * (1) A / B >= X / Y
+ * (2) A >= X
+ *
+ * Requirement (1) ensures we can correct for the required bitflip density.
+ * Requirement (2) ensures we can correct even when all bitflips are clumped
+ * in the same sector.
+ */
+static bool nand_ecc_strength_good(struct mtd_info *mtd)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct nand_ecc_ctrl *ecc = &chip->ecc;
+ int corr, ds_corr;
+
+ if (ecc->size == 0 || chip->ecc_step_ds == 0)
+ /* Not enough information */
+ return true;
+
+ /*
+ * We get the number of corrected bits per page to compare
+ * the correction density.
+ */
+ corr = (mtd->writesize * ecc->strength) / ecc->size;
+ ds_corr = (mtd->writesize * chip->ecc_strength_ds) / chip->ecc_step_ds;
+
+ return corr >= ds_corr && ecc->strength >= chip->ecc_strength_ds;
+}
/**
* nand_scan_tail - [NAND Interface] Scan for the NAND device
@@ -3980,18 +3718,7 @@
!(chip->bbt_options & NAND_BBT_USE_FLASH));
if (!(chip->options & NAND_OWN_BUFFERS)) {
-#ifndef __UBOOT__
- nbuf = kzalloc(sizeof(*nbuf) + mtd->writesize
- + mtd->oobsize * 3, GFP_KERNEL);
- if (!nbuf)
- return -ENOMEM;
- nbuf->ecccalc = (uint8_t *)(nbuf + 1);
- nbuf->ecccode = nbuf->ecccalc + mtd->oobsize;
- nbuf->databuf = nbuf->ecccode + mtd->oobsize;
-#else
nbuf = kzalloc(sizeof(struct nand_buffers), GFP_KERNEL);
-#endif
-
chip->buffers = nbuf;
} else {
if (!chip->buffers)
@@ -4037,8 +3764,7 @@
case NAND_ECC_HW_OOB_FIRST:
/* Similar to NAND_ECC_HW, but a separate read_page handle */
if (!ecc->calculate || !ecc->correct || !ecc->hwctl) {
- pr_warn("No ECC functions supplied; "
- "hardware ECC not possible\n");
+ pr_warn("No ECC functions supplied; hardware ECC not possible\n");
BUG();
}
if (!ecc->read_page)
@@ -4069,8 +3795,7 @@
ecc->read_page == nand_read_page_hwecc ||
!ecc->write_page ||
ecc->write_page == nand_write_page_hwecc)) {
- pr_warn("No ECC functions supplied; "
- "hardware ECC not possible\n");
+ pr_warn("No ECC functions supplied; hardware ECC not possible\n");
BUG();
}
/* Use standard syndrome read/write page function? */
@@ -4094,9 +3819,8 @@
}
break;
}
- pr_warn("%d byte HW ECC not possible on "
- "%d byte page size, fallback to SW ECC\n",
- ecc->size, mtd->writesize);
+ pr_warn("%d byte HW ECC not possible on %d byte page size, fallback to SW ECC\n",
+ ecc->size, mtd->writesize);
ecc->mode = NAND_ECC_SOFT;
case NAND_ECC_SOFT:
@@ -4130,27 +3854,28 @@
ecc->read_oob = nand_read_oob_std;
ecc->write_oob = nand_write_oob_std;
/*
- * Board driver should supply ecc.size and ecc.bytes values to
- * select how many bits are correctable; see nand_bch_init()
- * for details. Otherwise, default to 4 bits for large page
- * devices.
+ * Board driver should supply ecc.size and ecc.strength values
+ * to select how many bits are correctable. Otherwise, default
+ * to 4 bits for large page devices.
*/
if (!ecc->size && (mtd->oobsize >= 64)) {
ecc->size = 512;
- ecc->bytes = 7;
+ ecc->strength = 4;
}
+
+ /* See nand_bch_init() for details. */
+ ecc->bytes = DIV_ROUND_UP(
+ ecc->strength * fls(8 * ecc->size), 8);
ecc->priv = nand_bch_init(mtd, ecc->size, ecc->bytes,
&ecc->layout);
if (!ecc->priv) {
pr_warn("BCH ECC initialization failed!\n");
BUG();
}
- ecc->strength = ecc->bytes * 8 / fls(8 * ecc->size);
break;
case NAND_ECC_NONE:
- pr_warn("NAND_ECC_NONE selected by board driver. "
- "This is not recommended!\n");
+ pr_warn("NAND_ECC_NONE selected by board driver. This is not recommended!\n");
ecc->read_page = nand_read_page_raw;
ecc->write_page = nand_write_page_raw;
ecc->read_oob = nand_read_oob_std;
@@ -4183,6 +3908,11 @@
ecc->layout->oobavail += ecc->layout->oobfree[i].length;
mtd->oobavail = ecc->layout->oobavail;
+ /* ECC sanity check: warn if it's too weak */
+ if (!nand_ecc_strength_good(mtd))
+ pr_warn("WARNING: %s: the ECC used on your system is too weak compared to the one required by the NAND chip\n",
+ mtd->name);
+
/*
* Set the number of read / write steps for one page depending on ECC
* mode.
@@ -4216,18 +3946,22 @@
chip->pagebuf = -1;
/* Large page NAND with SOFT_ECC should support subpage reads */
- if ((ecc->mode == NAND_ECC_SOFT) && (chip->page_shift > 9))
- chip->options |= NAND_SUBPAGE_READ;
+ switch (ecc->mode) {
+ case NAND_ECC_SOFT:
+ case NAND_ECC_SOFT_BCH:
+ if (chip->page_shift > 9)
+ chip->options |= NAND_SUBPAGE_READ;
+ break;
+
+ default:
+ break;
+ }
/* Fill in remaining MTD driver data */
mtd->type = nand_is_slc(chip) ? MTD_NANDFLASH : MTD_MLCNANDFLASH;
mtd->flags = (chip->options & NAND_ROM) ? MTD_CAP_ROM :
MTD_CAP_NANDFLASH;
mtd->_erase = nand_erase;
-#ifndef __UBOOT__
- mtd->_point = NULL;
- mtd->_unpoint = NULL;
-#endif
mtd->_read = nand_read;
mtd->_write = nand_write;
mtd->_panic_write = panic_nand_write;
@@ -4236,10 +3970,7 @@
mtd->_sync = nand_sync;
mtd->_lock = NULL;
mtd->_unlock = NULL;
-#ifndef __UBOOT__
- mtd->_suspend = nand_suspend;
- mtd->_resume = nand_resume;
-#endif
+ mtd->_block_isreserved = nand_block_isreserved;
mtd->_block_isbad = nand_block_isbad;
mtd->_block_markbad = nand_block_markbad;
mtd->writebufsize = mtd->writesize;
@@ -4254,7 +3985,7 @@
* properly set.
*/
if (!mtd->bitflip_threshold)
- mtd->bitflip_threshold = mtd->ecc_strength;
+ mtd->bitflip_threshold = DIV_ROUND_UP(mtd->ecc_strength * 3, 4);
return 0;
}
@@ -4299,44 +4030,6 @@
}
EXPORT_SYMBOL(nand_scan);
-#ifndef __UBOOT__
-/**
- * nand_release - [NAND Interface] Free resources held by the NAND device
- * @mtd: MTD device structure
- */
-void nand_release(struct mtd_info *mtd)
-{
- struct nand_chip *chip = mtd->priv;
-
- if (chip->ecc.mode == NAND_ECC_SOFT_BCH)
- nand_bch_free((struct nand_bch_control *)chip->ecc.priv);
-
- mtd_device_unregister(mtd);
-
- /* Free bad block table memory */
- kfree(chip->bbt);
- if (!(chip->options & NAND_OWN_BUFFERS))
- kfree(chip->buffers);
-
- /* Free bad block descriptor memory */
- if (chip->badblock_pattern && chip->badblock_pattern->options
- & NAND_BBT_DYNAMICSTRUCT)
- kfree(chip->badblock_pattern);
-}
-EXPORT_SYMBOL_GPL(nand_release);
-
-static int __init nand_base_init(void)
-{
- led_trigger_register_simple("nand-disk", &nand_led_trigger);
- return 0;
-}
-
-static void __exit nand_base_exit(void)
-{
- led_trigger_unregister_simple(nand_led_trigger);
-}
-#endif
-
module_init(nand_base_init);
module_exit(nand_base_exit);
diff --git a/drivers/mtd/nand/nand_bbt.c b/drivers/mtd/nand/nand_bbt.c
index cf4a82d..00f28a4 100644
--- a/drivers/mtd/nand/nand_bbt.c
+++ b/drivers/mtd/nand/nand_bbt.c
@@ -59,30 +59,15 @@
*
*/
-#ifndef __UBOOT__
-#include <linux/slab.h>
-#include <linux/types.h>
+#include <common.h>
+#include <malloc.h>
+#include <linux/compat.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/bbm.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/nand_ecc.h>
#include <linux/bitops.h>
-#include <linux/delay.h>
-#include <linux/vmalloc.h>
-#include <linux/export.h>
#include <linux/string.h>
-#else
-#include <common.h>
-#include <malloc.h>
-#include <linux/compat.h>
-
- #include <linux/mtd/mtd.h>
- #include <linux/mtd/bbm.h>
- #include <linux/mtd/nand.h>
- #include <linux/mtd/nand_ecc.h>
- #include <linux/bitops.h>
- #include <linux/string.h>
-#endif
#define BBT_BLOCK_GOOD 0x00
#define BBT_BLOCK_WORN 0x01
@@ -214,12 +199,12 @@
res = mtd_read(mtd, from, len, &retlen, buf);
if (res < 0) {
if (mtd_is_eccerr(res)) {
- pr_info("nand_bbt: ECC error in BBT at "
- "0x%012llx\n", from & ~mtd->writesize);
+ pr_info("nand_bbt: ECC error in BBT at 0x%012llx\n",
+ from & ~mtd->writesize);
return res;
} else if (mtd_is_bitflip(res)) {
- pr_info("nand_bbt: corrected error in BBT at "
- "0x%012llx\n", from & ~mtd->writesize);
+ pr_info("nand_bbt: corrected error in BBT at 0x%012llx\n",
+ from & ~mtd->writesize);
ret = res;
} else {
pr_info("nand_bbt: error reading BBT\n");
@@ -541,11 +526,7 @@
{
struct nand_chip *this = mtd->priv;
int i, chips;
-#ifndef __UBOOT__
- int bits, startblock, block, dir;
-#else
int startblock, block, dir;
-#endif
int scanlen = mtd->writesize + mtd->oobsize;
int bbtblocks;
int blocktopage = this->bbt_erase_shift - this->page_shift;
@@ -569,11 +550,6 @@
bbtblocks = mtd->size >> this->bbt_erase_shift;
}
-#ifndef __UBOOT__
- /* Number of bits for each erase block in the bbt */
- bits = td->options & NAND_BBT_NRBITS_MSK;
-#endif
-
for (i = 0; i < chips; i++) {
/* Reset version information */
td->version[i] = 0;
@@ -602,8 +578,8 @@
if (td->pages[i] == -1)
pr_warn("Bad block table not found for chip %d\n", i);
else
- pr_info("Bad block table found at page %d, version "
- "0x%02X\n", td->pages[i], td->version[i]);
+ pr_info("Bad block table found at page %d, version 0x%02X\n",
+ td->pages[i], td->version[i]);
}
return 0;
}
@@ -747,12 +723,10 @@
res = mtd_read(mtd, to, len, &retlen, buf);
if (res < 0) {
if (retlen != len) {
- pr_info("nand_bbt: error reading block "
- "for writing the bad block table\n");
+ pr_info("nand_bbt: error reading block for writing the bad block table\n");
return res;
}
- pr_warn("nand_bbt: ECC error while reading "
- "block for writing bad block table\n");
+ pr_warn("nand_bbt: ECC error while reading block for writing bad block table\n");
}
/* Read oob data */
ops.ooblen = (len >> this->page_shift) * mtd->oobsize;
@@ -1304,6 +1278,7 @@
int nand_default_bbt(struct mtd_info *mtd)
{
struct nand_chip *this = mtd->priv;
+ int ret;
/* Is a flash based bad block table requested? */
if (this->bbt_options & NAND_BBT_USE_FLASH) {
@@ -1322,13 +1297,30 @@
this->bbt_md = NULL;
}
- if (!this->badblock_pattern)
- nand_create_badblock_pattern(this);
+ if (!this->badblock_pattern) {
+ ret = nand_create_badblock_pattern(this);
+ if (ret)
+ return ret;
+ }
return nand_scan_bbt(mtd, this->badblock_pattern);
}
/**
+ * nand_isreserved_bbt - [NAND Interface] Check if a block is reserved
+ * @mtd: MTD device structure
+ * @offs: offset in the device
+ */
+int nand_isreserved_bbt(struct mtd_info *mtd, loff_t offs)
+{
+ struct nand_chip *this = mtd->priv;
+ int block;
+
+ block = (int)(offs >> this->bbt_erase_shift);
+ return bbt_get_entry(this, block) == BBT_BLOCK_RESERVED;
+}
+
+/**
* nand_isbad_bbt - [NAND Interface] Check if a block is bad
* @mtd: MTD device structure
* @offs: offset in the device
@@ -1342,9 +1334,8 @@
block = (int)(offs >> this->bbt_erase_shift);
res = bbt_get_entry(this, block);
- pr_debug("nand_isbad_bbt(): bbt info for offs 0x%08x: "
- "(block %d) 0x%02x\n",
- (unsigned int)offs, block, res);
+ pr_debug("nand_isbad_bbt(): bbt info for offs 0x%08x: (block %d) 0x%02x\n",
+ (unsigned int)offs, block, res);
switch (res) {
case BBT_BLOCK_GOOD:
diff --git a/drivers/mtd/nand/nand_ids.c b/drivers/mtd/nand/nand_ids.c
index 9ed0577..fdd0074 100644
--- a/drivers/mtd/nand/nand_ids.c
+++ b/drivers/mtd/nand/nand_ids.c
@@ -8,13 +8,8 @@
* published by the Free Software Foundation.
*
*/
-#ifndef __UBOOT__
-#include <linux/module.h>
-#include <linux/mtd/nand.h>
-#else
#include <common.h>
#include <linux/mtd/nand.h>
-#endif
#include <linux/sizes.h>
#define LP_OPTIONS NAND_SAMSUNG_LP_OPTIONS
@@ -61,6 +56,10 @@
{"SDTNRGAMA 64G 3.3V 8-bit",
{ .id = {0x45, 0xde, 0x94, 0x93, 0x76, 0x50} },
SZ_16K, SZ_8K, SZ_4M, 0, 6, 1280, NAND_ECC_INFO(40, SZ_1K) },
+ {"H27UCG8T2ATR-BC 64G 3.3V 8-bit",
+ { .id = {0xad, 0xde, 0x94, 0xda, 0x74, 0xc4} },
+ SZ_8K, SZ_8K, SZ_2M, 0, 6, 640, NAND_ECC_INFO(40, SZ_1K),
+ 4 },
LEGACY_ID_NAND("NAND 4MiB 5V 8-bit", 0x6B, 4, SZ_8K, SP_OPTIONS),
LEGACY_ID_NAND("NAND 4MiB 3,3V 8-bit", 0xE3, 4, SZ_8K, SP_OPTIONS),
@@ -189,6 +188,7 @@
{NAND_MFR_EON, "Eon"},
{NAND_MFR_SANDISK, "SanDisk"},
{NAND_MFR_INTEL, "Intel"},
+ {NAND_MFR_ATO, "ATO"},
{0x0, "Unknown"}
};
diff --git a/drivers/mtd/nand/nand_timings.c b/drivers/mtd/nand/nand_timings.c
new file mode 100644
index 0000000..53dcbd3
--- /dev/null
+++ b/drivers/mtd/nand/nand_timings.c
@@ -0,0 +1,252 @@
+/*
+ * Copyright (C) 2014 Free Electrons
+ *
+ * Author: Boris BREZILLON <boris.brezillon@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <common.h>
+#include <linux/kernel.h>
+#include <linux/mtd/nand.h>
+
+static const struct nand_sdr_timings onfi_sdr_timings[] = {
+ /* Mode 0 */
+ {
+ .tADL_min = 200000,
+ .tALH_min = 20000,
+ .tALS_min = 50000,
+ .tAR_min = 25000,
+ .tCEA_max = 100000,
+ .tCEH_min = 20000,
+ .tCH_min = 20000,
+ .tCHZ_max = 100000,
+ .tCLH_min = 20000,
+ .tCLR_min = 20000,
+ .tCLS_min = 50000,
+ .tCOH_min = 0,
+ .tCS_min = 70000,
+ .tDH_min = 20000,
+ .tDS_min = 40000,
+ .tFEAT_max = 1000000,
+ .tIR_min = 10000,
+ .tITC_max = 1000000,
+ .tRC_min = 100000,
+ .tREA_max = 40000,
+ .tREH_min = 30000,
+ .tRHOH_min = 0,
+ .tRHW_min = 200000,
+ .tRHZ_max = 200000,
+ .tRLOH_min = 0,
+ .tRP_min = 50000,
+ .tRST_max = 250000000000ULL,
+ .tWB_max = 200000,
+ .tRR_min = 40000,
+ .tWC_min = 100000,
+ .tWH_min = 30000,
+ .tWHR_min = 120000,
+ .tWP_min = 50000,
+ .tWW_min = 100000,
+ },
+ /* Mode 1 */
+ {
+ .tADL_min = 100000,
+ .tALH_min = 10000,
+ .tALS_min = 25000,
+ .tAR_min = 10000,
+ .tCEA_max = 45000,
+ .tCEH_min = 20000,
+ .tCH_min = 10000,
+ .tCHZ_max = 50000,
+ .tCLH_min = 10000,
+ .tCLR_min = 10000,
+ .tCLS_min = 25000,
+ .tCOH_min = 15000,
+ .tCS_min = 35000,
+ .tDH_min = 10000,
+ .tDS_min = 20000,
+ .tFEAT_max = 1000000,
+ .tIR_min = 0,
+ .tITC_max = 1000000,
+ .tRC_min = 50000,
+ .tREA_max = 30000,
+ .tREH_min = 15000,
+ .tRHOH_min = 15000,
+ .tRHW_min = 100000,
+ .tRHZ_max = 100000,
+ .tRLOH_min = 0,
+ .tRP_min = 25000,
+ .tRR_min = 20000,
+ .tRST_max = 500000000,
+ .tWB_max = 100000,
+ .tWC_min = 45000,
+ .tWH_min = 15000,
+ .tWHR_min = 80000,
+ .tWP_min = 25000,
+ .tWW_min = 100000,
+ },
+ /* Mode 2 */
+ {
+ .tADL_min = 100000,
+ .tALH_min = 10000,
+ .tALS_min = 15000,
+ .tAR_min = 10000,
+ .tCEA_max = 30000,
+ .tCEH_min = 20000,
+ .tCH_min = 10000,
+ .tCHZ_max = 50000,
+ .tCLH_min = 10000,
+ .tCLR_min = 10000,
+ .tCLS_min = 15000,
+ .tCOH_min = 15000,
+ .tCS_min = 25000,
+ .tDH_min = 5000,
+ .tDS_min = 15000,
+ .tFEAT_max = 1000000,
+ .tIR_min = 0,
+ .tITC_max = 1000000,
+ .tRC_min = 35000,
+ .tREA_max = 25000,
+ .tREH_min = 15000,
+ .tRHOH_min = 15000,
+ .tRHW_min = 100000,
+ .tRHZ_max = 100000,
+ .tRLOH_min = 0,
+ .tRR_min = 20000,
+ .tRST_max = 500000000,
+ .tWB_max = 100000,
+ .tRP_min = 17000,
+ .tWC_min = 35000,
+ .tWH_min = 15000,
+ .tWHR_min = 80000,
+ .tWP_min = 17000,
+ .tWW_min = 100000,
+ },
+ /* Mode 3 */
+ {
+ .tADL_min = 100000,
+ .tALH_min = 5000,
+ .tALS_min = 10000,
+ .tAR_min = 10000,
+ .tCEA_max = 25000,
+ .tCEH_min = 20000,
+ .tCH_min = 5000,
+ .tCHZ_max = 50000,
+ .tCLH_min = 5000,
+ .tCLR_min = 10000,
+ .tCLS_min = 10000,
+ .tCOH_min = 15000,
+ .tCS_min = 25000,
+ .tDH_min = 5000,
+ .tDS_min = 10000,
+ .tFEAT_max = 1000000,
+ .tIR_min = 0,
+ .tITC_max = 1000000,
+ .tRC_min = 30000,
+ .tREA_max = 20000,
+ .tREH_min = 10000,
+ .tRHOH_min = 15000,
+ .tRHW_min = 100000,
+ .tRHZ_max = 100000,
+ .tRLOH_min = 0,
+ .tRP_min = 15000,
+ .tRR_min = 20000,
+ .tRST_max = 500000000,
+ .tWB_max = 100000,
+ .tWC_min = 30000,
+ .tWH_min = 10000,
+ .tWHR_min = 80000,
+ .tWP_min = 15000,
+ .tWW_min = 100000,
+ },
+ /* Mode 4 */
+ {
+ .tADL_min = 70000,
+ .tALH_min = 5000,
+ .tALS_min = 10000,
+ .tAR_min = 10000,
+ .tCEA_max = 25000,
+ .tCEH_min = 20000,
+ .tCH_min = 5000,
+ .tCHZ_max = 30000,
+ .tCLH_min = 5000,
+ .tCLR_min = 10000,
+ .tCLS_min = 10000,
+ .tCOH_min = 15000,
+ .tCS_min = 20000,
+ .tDH_min = 5000,
+ .tDS_min = 10000,
+ .tFEAT_max = 1000000,
+ .tIR_min = 0,
+ .tITC_max = 1000000,
+ .tRC_min = 25000,
+ .tREA_max = 20000,
+ .tREH_min = 10000,
+ .tRHOH_min = 15000,
+ .tRHW_min = 100000,
+ .tRHZ_max = 100000,
+ .tRLOH_min = 5000,
+ .tRP_min = 12000,
+ .tRR_min = 20000,
+ .tRST_max = 500000000,
+ .tWB_max = 100000,
+ .tWC_min = 25000,
+ .tWH_min = 10000,
+ .tWHR_min = 80000,
+ .tWP_min = 12000,
+ .tWW_min = 100000,
+ },
+ /* Mode 5 */
+ {
+ .tADL_min = 70000,
+ .tALH_min = 5000,
+ .tALS_min = 10000,
+ .tAR_min = 10000,
+ .tCEA_max = 25000,
+ .tCEH_min = 20000,
+ .tCH_min = 5000,
+ .tCHZ_max = 30000,
+ .tCLH_min = 5000,
+ .tCLR_min = 10000,
+ .tCLS_min = 10000,
+ .tCOH_min = 15000,
+ .tCS_min = 15000,
+ .tDH_min = 5000,
+ .tDS_min = 7000,
+ .tFEAT_max = 1000000,
+ .tIR_min = 0,
+ .tITC_max = 1000000,
+ .tRC_min = 20000,
+ .tREA_max = 16000,
+ .tREH_min = 7000,
+ .tRHOH_min = 15000,
+ .tRHW_min = 100000,
+ .tRHZ_max = 100000,
+ .tRLOH_min = 5000,
+ .tRP_min = 10000,
+ .tRR_min = 20000,
+ .tRST_max = 500000000,
+ .tWB_max = 100000,
+ .tWC_min = 20000,
+ .tWH_min = 7000,
+ .tWHR_min = 80000,
+ .tWP_min = 10000,
+ .tWW_min = 100000,
+ },
+};
+
+/**
+ * onfi_async_timing_mode_to_sdr_timings - [NAND Interface] Retrieve NAND
+ * timings according to the given ONFI timing mode
+ * @mode: ONFI timing mode
+ */
+const struct nand_sdr_timings *onfi_async_timing_mode_to_sdr_timings(int mode)
+{
+ if (mode < 0 || mode >= ARRAY_SIZE(onfi_sdr_timings))
+ return ERR_PTR(-EINVAL);
+
+ return &onfi_sdr_timings[mode];
+}
+EXPORT_SYMBOL(onfi_async_timing_mode_to_sdr_timings);
diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
new file mode 100644
index 0000000..1565a9a
--- /dev/null
+++ b/drivers/mtd/nand/pxa3xx_nand.c
@@ -0,0 +1,1621 @@
+/*
+ * drivers/mtd/nand/pxa3xx_nand.c
+ *
+ * Copyright © 2005 Intel Corporation
+ * Copyright © 2006 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <nand.h>
+#include <asm/errno.h>
+#include <asm/io.h>
+#include <asm/arch/cpu.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/types.h>
+
+#include "pxa3xx_nand.h"
+
+/* Some U-Boot compatibility macros */
+#define writesl(a, d, s) __raw_writesl((unsigned long)a, d, s)
+#define readsl(a, d, s) __raw_readsl((unsigned long)a, d, s)
+#define writesw(a, d, s) __raw_writesw((unsigned long)a, d, s)
+#define readsw(a, d, s) __raw_readsw((unsigned long)a, d, s)
+#define writesb(a, d, s) __raw_writesb((unsigned long)a, d, s)
+#define readsb(a, d, s) __raw_readsb((unsigned long)a, d, s)
+
+#define TIMEOUT_DRAIN_FIFO 5 /* in ms */
+#define CHIP_DELAY_TIMEOUT 200
+#define NAND_STOP_DELAY 40
+#define PAGE_CHUNK_SIZE (2048)
+
+/*
+ * Define a buffer size for the initial command that detects the flash device:
+ * STATUS, READID and PARAM. The largest of these is the PARAM command,
+ * needing 256 bytes.
+ */
+#define INIT_BUFFER_SIZE 256
+
+/* registers and bit definitions */
+#define NDCR (0x00) /* Control register */
+#define NDTR0CS0 (0x04) /* Timing Parameter 0 for CS0 */
+#define NDTR1CS0 (0x0C) /* Timing Parameter 1 for CS0 */
+#define NDSR (0x14) /* Status Register */
+#define NDPCR (0x18) /* Page Count Register */
+#define NDBDR0 (0x1C) /* Bad Block Register 0 */
+#define NDBDR1 (0x20) /* Bad Block Register 1 */
+#define NDECCCTRL (0x28) /* ECC control */
+#define NDDB (0x40) /* Data Buffer */
+#define NDCB0 (0x48) /* Command Buffer0 */
+#define NDCB1 (0x4C) /* Command Buffer1 */
+#define NDCB2 (0x50) /* Command Buffer2 */
+
+#define NDCR_SPARE_EN (0x1 << 31)
+#define NDCR_ECC_EN (0x1 << 30)
+#define NDCR_DMA_EN (0x1 << 29)
+#define NDCR_ND_RUN (0x1 << 28)
+#define NDCR_DWIDTH_C (0x1 << 27)
+#define NDCR_DWIDTH_M (0x1 << 26)
+#define NDCR_PAGE_SZ (0x1 << 24)
+#define NDCR_NCSX (0x1 << 23)
+#define NDCR_ND_MODE (0x3 << 21)
+#define NDCR_NAND_MODE (0x0)
+#define NDCR_CLR_PG_CNT (0x1 << 20)
+#define NDCR_STOP_ON_UNCOR (0x1 << 19)
+#define NDCR_RD_ID_CNT_MASK (0x7 << 16)
+#define NDCR_RD_ID_CNT(x) (((x) << 16) & NDCR_RD_ID_CNT_MASK)
+
+#define NDCR_RA_START (0x1 << 15)
+#define NDCR_PG_PER_BLK (0x1 << 14)
+#define NDCR_ND_ARB_EN (0x1 << 12)
+#define NDCR_INT_MASK (0xFFF)
+
+#define NDSR_MASK (0xfff)
+#define NDSR_ERR_CNT_OFF (16)
+#define NDSR_ERR_CNT_MASK (0x1f)
+#define NDSR_ERR_CNT(sr) ((sr >> NDSR_ERR_CNT_OFF) & NDSR_ERR_CNT_MASK)
+#define NDSR_RDY (0x1 << 12)
+#define NDSR_FLASH_RDY (0x1 << 11)
+#define NDSR_CS0_PAGED (0x1 << 10)
+#define NDSR_CS1_PAGED (0x1 << 9)
+#define NDSR_CS0_CMDD (0x1 << 8)
+#define NDSR_CS1_CMDD (0x1 << 7)
+#define NDSR_CS0_BBD (0x1 << 6)
+#define NDSR_CS1_BBD (0x1 << 5)
+#define NDSR_UNCORERR (0x1 << 4)
+#define NDSR_CORERR (0x1 << 3)
+#define NDSR_WRDREQ (0x1 << 2)
+#define NDSR_RDDREQ (0x1 << 1)
+#define NDSR_WRCMDREQ (0x1)
+
+#define NDCB0_LEN_OVRD (0x1 << 28)
+#define NDCB0_ST_ROW_EN (0x1 << 26)
+#define NDCB0_AUTO_RS (0x1 << 25)
+#define NDCB0_CSEL (0x1 << 24)
+#define NDCB0_EXT_CMD_TYPE_MASK (0x7 << 29)
+#define NDCB0_EXT_CMD_TYPE(x) (((x) << 29) & NDCB0_EXT_CMD_TYPE_MASK)
+#define NDCB0_CMD_TYPE_MASK (0x7 << 21)
+#define NDCB0_CMD_TYPE(x) (((x) << 21) & NDCB0_CMD_TYPE_MASK)
+#define NDCB0_NC (0x1 << 20)
+#define NDCB0_DBC (0x1 << 19)
+#define NDCB0_ADDR_CYC_MASK (0x7 << 16)
+#define NDCB0_ADDR_CYC(x) (((x) << 16) & NDCB0_ADDR_CYC_MASK)
+#define NDCB0_CMD2_MASK (0xff << 8)
+#define NDCB0_CMD1_MASK (0xff)
+#define NDCB0_ADDR_CYC_SHIFT (16)
+
+#define EXT_CMD_TYPE_DISPATCH 6 /* Command dispatch */
+#define EXT_CMD_TYPE_NAKED_RW 5 /* Naked read or Naked write */
+#define EXT_CMD_TYPE_READ 4 /* Read */
+#define EXT_CMD_TYPE_DISP_WR 4 /* Command dispatch with write */
+#define EXT_CMD_TYPE_FINAL 3 /* Final command */
+#define EXT_CMD_TYPE_LAST_RW 1 /* Last naked read/write */
+#define EXT_CMD_TYPE_MONO 0 /* Monolithic read/write */
+
+/* macros for registers read/write */
+#define nand_writel(info, off, val) \
+ writel((val), (info)->mmio_base + (off))
+
+#define nand_readl(info, off) \
+ readl((info)->mmio_base + (off))
+
+/* error code and state */
+enum {
+ ERR_NONE = 0,
+ ERR_DMABUSERR = -1,
+ ERR_SENDCMD = -2,
+ ERR_UNCORERR = -3,
+ ERR_BBERR = -4,
+ ERR_CORERR = -5,
+};
+
+enum {
+ STATE_IDLE = 0,
+ STATE_PREPARED,
+ STATE_CMD_HANDLE,
+ STATE_DMA_READING,
+ STATE_DMA_WRITING,
+ STATE_DMA_DONE,
+ STATE_PIO_READING,
+ STATE_PIO_WRITING,
+ STATE_CMD_DONE,
+ STATE_READY,
+};
+
+enum pxa3xx_nand_variant {
+ PXA3XX_NAND_VARIANT_PXA,
+ PXA3XX_NAND_VARIANT_ARMADA370,
+};
+
+struct pxa3xx_nand_host {
+ struct nand_chip chip;
+ struct mtd_info *mtd;
+ void *info_data;
+
+ /* page size of attached chip */
+ int use_ecc;
+ int cs;
+
+ /* calculated from pxa3xx_nand_flash data */
+ unsigned int col_addr_cycles;
+ unsigned int row_addr_cycles;
+ size_t read_id_bytes;
+
+};
+
+struct pxa3xx_nand_info {
+ struct nand_hw_control controller;
+ struct pxa3xx_nand_platform_data *pdata;
+
+ struct clk *clk;
+ void __iomem *mmio_base;
+ unsigned long mmio_phys;
+ int cmd_complete, dev_ready;
+
+ unsigned int buf_start;
+ unsigned int buf_count;
+ unsigned int buf_size;
+ unsigned int data_buff_pos;
+ unsigned int oob_buff_pos;
+
+ unsigned char *data_buff;
+ unsigned char *oob_buff;
+
+ struct pxa3xx_nand_host *host[NUM_CHIP_SELECT];
+ unsigned int state;
+
+ /*
+ * This driver supports NFCv1 (as found in PXA SoC)
+ * and NFCv2 (as found in Armada 370/XP SoC).
+ */
+ enum pxa3xx_nand_variant variant;
+
+ int cs;
+ int use_ecc; /* use HW ECC ? */
+ int ecc_bch; /* using BCH ECC? */
+ int use_spare; /* use spare ? */
+ int need_wait;
+
+ unsigned int data_size; /* data to be read from FIFO */
+ unsigned int chunk_size; /* split commands chunk size */
+ unsigned int oob_size;
+ unsigned int spare_size;
+ unsigned int ecc_size;
+ unsigned int ecc_err_cnt;
+ unsigned int max_bitflips;
+ int retcode;
+
+ /* cached register value */
+ uint32_t reg_ndcr;
+ uint32_t ndtr0cs0;
+ uint32_t ndtr1cs0;
+
+ /* generated NDCBx register values */
+ uint32_t ndcb0;
+ uint32_t ndcb1;
+ uint32_t ndcb2;
+ uint32_t ndcb3;
+};
+
+static struct pxa3xx_nand_timing timing[] = {
+ { 40, 80, 60, 100, 80, 100, 90000, 400, 40, },
+ { 10, 0, 20, 40, 30, 40, 11123, 110, 10, },
+ { 10, 25, 15, 25, 15, 30, 25000, 60, 10, },
+ { 10, 35, 15, 25, 15, 25, 25000, 60, 10, },
+};
+
+static struct pxa3xx_nand_flash builtin_flash_types[] = {
+ { 0x46ec, 16, 16, &timing[1] },
+ { 0xdaec, 8, 8, &timing[1] },
+ { 0xd7ec, 8, 8, &timing[1] },
+ { 0xa12c, 8, 8, &timing[2] },
+ { 0xb12c, 16, 16, &timing[2] },
+ { 0xdc2c, 8, 8, &timing[2] },
+ { 0xcc2c, 16, 16, &timing[2] },
+ { 0xba20, 16, 16, &timing[3] },
+};
+
+static u8 bbt_pattern[] = {'M', 'V', 'B', 'b', 't', '0' };
+static u8 bbt_mirror_pattern[] = {'1', 't', 'b', 'B', 'V', 'M' };
+
+static struct nand_bbt_descr bbt_main_descr = {
+ .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
+ | NAND_BBT_2BIT | NAND_BBT_VERSION,
+ .offs = 8,
+ .len = 6,
+ .veroffs = 14,
+ .maxblocks = 8, /* Last 8 blocks in each chip */
+ .pattern = bbt_pattern
+};
+
+static struct nand_bbt_descr bbt_mirror_descr = {
+ .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
+ | NAND_BBT_2BIT | NAND_BBT_VERSION,
+ .offs = 8,
+ .len = 6,
+ .veroffs = 14,
+ .maxblocks = 8, /* Last 8 blocks in each chip */
+ .pattern = bbt_mirror_pattern
+};
+
+static struct nand_ecclayout ecc_layout_2KB_bch4bit = {
+ .eccbytes = 32,
+ .eccpos = {
+ 32, 33, 34, 35, 36, 37, 38, 39,
+ 40, 41, 42, 43, 44, 45, 46, 47,
+ 48, 49, 50, 51, 52, 53, 54, 55,
+ 56, 57, 58, 59, 60, 61, 62, 63},
+ .oobfree = { {2, 30} }
+};
+
+static struct nand_ecclayout ecc_layout_4KB_bch4bit = {
+ .eccbytes = 64,
+ .eccpos = {
+ 32, 33, 34, 35, 36, 37, 38, 39,
+ 40, 41, 42, 43, 44, 45, 46, 47,
+ 48, 49, 50, 51, 52, 53, 54, 55,
+ 56, 57, 58, 59, 60, 61, 62, 63,
+ 96, 97, 98, 99, 100, 101, 102, 103,
+ 104, 105, 106, 107, 108, 109, 110, 111,
+ 112, 113, 114, 115, 116, 117, 118, 119,
+ 120, 121, 122, 123, 124, 125, 126, 127},
+ /* Bootrom looks in bytes 0 & 5 for bad blocks */
+ .oobfree = { {6, 26}, { 64, 32} }
+};
+
+static struct nand_ecclayout ecc_layout_4KB_bch8bit = {
+ .eccbytes = 128,
+ .eccpos = {
+ 32, 33, 34, 35, 36, 37, 38, 39,
+ 40, 41, 42, 43, 44, 45, 46, 47,
+ 48, 49, 50, 51, 52, 53, 54, 55,
+ 56, 57, 58, 59, 60, 61, 62, 63},
+ .oobfree = { }
+};
+
+#define NDTR0_tCH(c) (min((c), 7) << 19)
+#define NDTR0_tCS(c) (min((c), 7) << 16)
+#define NDTR0_tWH(c) (min((c), 7) << 11)
+#define NDTR0_tWP(c) (min((c), 7) << 8)
+#define NDTR0_tRH(c) (min((c), 7) << 3)
+#define NDTR0_tRP(c) (min((c), 7) << 0)
+
+#define NDTR1_tR(c) (min((c), 65535) << 16)
+#define NDTR1_tWHR(c) (min((c), 15) << 4)
+#define NDTR1_tAR(c) (min((c), 15) << 0)
+
+/* convert nano-seconds to nand flash controller clock cycles */
+#define ns2cycle(ns, clk) (int)((ns) * (clk / 1000000) / 1000)
+
+static enum pxa3xx_nand_variant pxa3xx_nand_get_variant(void)
+{
+ /* We only support the Armada 370/XP/38x for now */
+ return PXA3XX_NAND_VARIANT_ARMADA370;
+}
+
+static void pxa3xx_nand_set_timing(struct pxa3xx_nand_host *host,
+ const struct pxa3xx_nand_timing *t)
+{
+ struct pxa3xx_nand_info *info = host->info_data;
+ unsigned long nand_clk = mvebu_get_nand_clock();
+ uint32_t ndtr0, ndtr1;
+
+ ndtr0 = NDTR0_tCH(ns2cycle(t->tCH, nand_clk)) |
+ NDTR0_tCS(ns2cycle(t->tCS, nand_clk)) |
+ NDTR0_tWH(ns2cycle(t->tWH, nand_clk)) |
+ NDTR0_tWP(ns2cycle(t->tWP, nand_clk)) |
+ NDTR0_tRH(ns2cycle(t->tRH, nand_clk)) |
+ NDTR0_tRP(ns2cycle(t->tRP, nand_clk));
+
+ ndtr1 = NDTR1_tR(ns2cycle(t->tR, nand_clk)) |
+ NDTR1_tWHR(ns2cycle(t->tWHR, nand_clk)) |
+ NDTR1_tAR(ns2cycle(t->tAR, nand_clk));
+
+ info->ndtr0cs0 = ndtr0;
+ info->ndtr1cs0 = ndtr1;
+ nand_writel(info, NDTR0CS0, ndtr0);
+ nand_writel(info, NDTR1CS0, ndtr1);
+}
+
+static void pxa3xx_nand_set_sdr_timing(struct pxa3xx_nand_host *host,
+ const struct nand_sdr_timings *t)
+{
+ struct pxa3xx_nand_info *info = host->info_data;
+ struct nand_chip *chip = &host->chip;
+ unsigned long nand_clk = mvebu_get_nand_clock();
+ uint32_t ndtr0, ndtr1;
+
+ u32 tCH_min = DIV_ROUND_UP(t->tCH_min, 1000);
+ u32 tCS_min = DIV_ROUND_UP(t->tCS_min, 1000);
+ u32 tWH_min = DIV_ROUND_UP(t->tWH_min, 1000);
+ u32 tWP_min = DIV_ROUND_UP(t->tWC_min - tWH_min, 1000);
+ u32 tREH_min = DIV_ROUND_UP(t->tREH_min, 1000);
+ u32 tRP_min = DIV_ROUND_UP(t->tRC_min - tREH_min, 1000);
+ u32 tR = chip->chip_delay * 1000;
+ u32 tWHR_min = DIV_ROUND_UP(t->tWHR_min, 1000);
+ u32 tAR_min = DIV_ROUND_UP(t->tAR_min, 1000);
+
+ /* fallback to a default value if tR = 0 */
+ if (!tR)
+ tR = 20000;
+
+ ndtr0 = NDTR0_tCH(ns2cycle(tCH_min, nand_clk)) |
+ NDTR0_tCS(ns2cycle(tCS_min, nand_clk)) |
+ NDTR0_tWH(ns2cycle(tWH_min, nand_clk)) |
+ NDTR0_tWP(ns2cycle(tWP_min, nand_clk)) |
+ NDTR0_tRH(ns2cycle(tREH_min, nand_clk)) |
+ NDTR0_tRP(ns2cycle(tRP_min, nand_clk));
+
+ ndtr1 = NDTR1_tR(ns2cycle(tR, nand_clk)) |
+ NDTR1_tWHR(ns2cycle(tWHR_min, nand_clk)) |
+ NDTR1_tAR(ns2cycle(tAR_min, nand_clk));
+
+ info->ndtr0cs0 = ndtr0;
+ info->ndtr1cs0 = ndtr1;
+ nand_writel(info, NDTR0CS0, ndtr0);
+ nand_writel(info, NDTR1CS0, ndtr1);
+}
+
+static int pxa3xx_nand_init_timings(struct pxa3xx_nand_host *host)
+{
+ const struct nand_sdr_timings *timings;
+ struct nand_chip *chip = &host->chip;
+ struct pxa3xx_nand_info *info = host->info_data;
+ const struct pxa3xx_nand_flash *f = NULL;
+ int mode, id, ntypes, i;
+
+ mode = onfi_get_async_timing_mode(chip);
+ if (mode == ONFI_TIMING_MODE_UNKNOWN) {
+ ntypes = ARRAY_SIZE(builtin_flash_types);
+
+ chip->cmdfunc(host->mtd, NAND_CMD_READID, 0x00, -1);
+
+ id = chip->read_byte(host->mtd);
+ id |= chip->read_byte(host->mtd) << 0x8;
+
+ for (i = 0; i < ntypes; i++) {
+ f = &builtin_flash_types[i];
+
+ if (f->chip_id == id)
+ break;
+ }
+
+ if (i == ntypes) {
+ dev_err(&info->pdev->dev, "Error: timings not found\n");
+ return -EINVAL;
+ }
+
+ pxa3xx_nand_set_timing(host, f->timing);
+
+ if (f->flash_width == 16) {
+ info->reg_ndcr |= NDCR_DWIDTH_M;
+ chip->options |= NAND_BUSWIDTH_16;
+ }
+
+ info->reg_ndcr |= (f->dfc_width == 16) ? NDCR_DWIDTH_C : 0;
+ } else {
+ mode = fls(mode) - 1;
+ if (mode < 0)
+ mode = 0;
+
+ timings = onfi_async_timing_mode_to_sdr_timings(mode);
+ if (IS_ERR(timings))
+ return PTR_ERR(timings);
+
+ pxa3xx_nand_set_sdr_timing(host, timings);
+ }
+
+ return 0;
+}
+
+/*
+ * Set the data and OOB size, depending on the selected
+ * spare and ECC configuration.
+ * Only applicable to READ0, READOOB and PAGEPROG commands.
+ */
+static void pxa3xx_set_datasize(struct pxa3xx_nand_info *info,
+ struct mtd_info *mtd)
+{
+ int oob_enable = info->reg_ndcr & NDCR_SPARE_EN;
+
+ info->data_size = mtd->writesize;
+ if (!oob_enable)
+ return;
+
+ info->oob_size = info->spare_size;
+ if (!info->use_ecc)
+ info->oob_size += info->ecc_size;
+}
+
+/**
+ * NOTE: it is a must to set ND_RUN firstly, then write
+ * command buffer, otherwise, it does not work.
+ * We enable all the interrupt at the same time, and
+ * let pxa3xx_nand_irq to handle all logic.
+ */
+static void pxa3xx_nand_start(struct pxa3xx_nand_info *info)
+{
+ uint32_t ndcr;
+
+ ndcr = info->reg_ndcr;
+
+ if (info->use_ecc) {
+ ndcr |= NDCR_ECC_EN;
+ if (info->ecc_bch)
+ nand_writel(info, NDECCCTRL, 0x1);
+ } else {
+ ndcr &= ~NDCR_ECC_EN;
+ if (info->ecc_bch)
+ nand_writel(info, NDECCCTRL, 0x0);
+ }
+
+ ndcr &= ~NDCR_DMA_EN;
+
+ if (info->use_spare)
+ ndcr |= NDCR_SPARE_EN;
+ else
+ ndcr &= ~NDCR_SPARE_EN;
+
+ ndcr |= NDCR_ND_RUN;
+
+ /* clear status bits and run */
+ nand_writel(info, NDCR, 0);
+ nand_writel(info, NDSR, NDSR_MASK);
+ nand_writel(info, NDCR, ndcr);
+}
+
+static void disable_int(struct pxa3xx_nand_info *info, uint32_t int_mask)
+{
+ uint32_t ndcr;
+
+ ndcr = nand_readl(info, NDCR);
+ nand_writel(info, NDCR, ndcr | int_mask);
+}
+
+static void drain_fifo(struct pxa3xx_nand_info *info, void *data, int len)
+{
+ if (info->ecc_bch) {
+ u32 ts;
+
+ /*
+ * According to the datasheet, when reading from NDDB
+ * with BCH enabled, after each 32 bytes reads, we
+ * have to make sure that the NDSR.RDDREQ bit is set.
+ *
+ * Drain the FIFO 8 32 bits reads at a time, and skip
+ * the polling on the last read.
+ */
+ while (len > 8) {
+ readsl(info->mmio_base + NDDB, data, 8);
+
+ ts = get_timer(0);
+ while (!(nand_readl(info, NDSR) & NDSR_RDDREQ)) {
+ if (get_timer(ts) > TIMEOUT_DRAIN_FIFO) {
+ dev_err(&info->pdev->dev,
+ "Timeout on RDDREQ while draining the FIFO\n");
+ return;
+ }
+ }
+
+ data += 32;
+ len -= 8;
+ }
+ }
+
+ readsl(info->mmio_base + NDDB, data, len);
+}
+
+static void handle_data_pio(struct pxa3xx_nand_info *info)
+{
+ unsigned int do_bytes = min(info->data_size, info->chunk_size);
+
+ switch (info->state) {
+ case STATE_PIO_WRITING:
+ writesl(info->mmio_base + NDDB,
+ info->data_buff + info->data_buff_pos,
+ DIV_ROUND_UP(do_bytes, 4));
+
+ if (info->oob_size > 0)
+ writesl(info->mmio_base + NDDB,
+ info->oob_buff + info->oob_buff_pos,
+ DIV_ROUND_UP(info->oob_size, 4));
+ break;
+ case STATE_PIO_READING:
+ drain_fifo(info,
+ info->data_buff + info->data_buff_pos,
+ DIV_ROUND_UP(do_bytes, 4));
+
+ if (info->oob_size > 0)
+ drain_fifo(info,
+ info->oob_buff + info->oob_buff_pos,
+ DIV_ROUND_UP(info->oob_size, 4));
+ break;
+ default:
+ dev_err(&info->pdev->dev, "%s: invalid state %d\n", __func__,
+ info->state);
+ BUG();
+ }
+
+ /* Update buffer pointers for multi-page read/write */
+ info->data_buff_pos += do_bytes;
+ info->oob_buff_pos += info->oob_size;
+ info->data_size -= do_bytes;
+}
+
+static void pxa3xx_nand_irq_thread(struct pxa3xx_nand_info *info)
+{
+ handle_data_pio(info);
+
+ info->state = STATE_CMD_DONE;
+ nand_writel(info, NDSR, NDSR_WRDREQ | NDSR_RDDREQ);
+}
+
+static irqreturn_t pxa3xx_nand_irq(struct pxa3xx_nand_info *info)
+{
+ unsigned int status, is_completed = 0, is_ready = 0;
+ unsigned int ready, cmd_done;
+ irqreturn_t ret = IRQ_HANDLED;
+
+ if (info->cs == 0) {
+ ready = NDSR_FLASH_RDY;
+ cmd_done = NDSR_CS0_CMDD;
+ } else {
+ ready = NDSR_RDY;
+ cmd_done = NDSR_CS1_CMDD;
+ }
+
+ status = nand_readl(info, NDSR);
+
+ if (status & NDSR_UNCORERR)
+ info->retcode = ERR_UNCORERR;
+ if (status & NDSR_CORERR) {
+ info->retcode = ERR_CORERR;
+ if (info->variant == PXA3XX_NAND_VARIANT_ARMADA370 &&
+ info->ecc_bch)
+ info->ecc_err_cnt = NDSR_ERR_CNT(status);
+ else
+ info->ecc_err_cnt = 1;
+
+ /*
+ * Each chunk composing a page is corrected independently,
+ * and we need to store maximum number of corrected bitflips
+ * to return it to the MTD layer in ecc.read_page().
+ */
+ info->max_bitflips = max_t(unsigned int,
+ info->max_bitflips,
+ info->ecc_err_cnt);
+ }
+ if (status & (NDSR_RDDREQ | NDSR_WRDREQ)) {
+ info->state = (status & NDSR_RDDREQ) ?
+ STATE_PIO_READING : STATE_PIO_WRITING;
+ /* Call the IRQ thread in U-Boot directly */
+ pxa3xx_nand_irq_thread(info);
+ return 0;
+ }
+ if (status & cmd_done) {
+ info->state = STATE_CMD_DONE;
+ is_completed = 1;
+ }
+ if (status & ready) {
+ info->state = STATE_READY;
+ is_ready = 1;
+ }
+
+ if (status & NDSR_WRCMDREQ) {
+ nand_writel(info, NDSR, NDSR_WRCMDREQ);
+ status &= ~NDSR_WRCMDREQ;
+ info->state = STATE_CMD_HANDLE;
+
+ /*
+ * Command buffer registers NDCB{0-2} (and optionally NDCB3)
+ * must be loaded by writing directly either 12 or 16
+ * bytes directly to NDCB0, four bytes at a time.
+ *
+ * Direct write access to NDCB1, NDCB2 and NDCB3 is ignored
+ * but each NDCBx register can be read.
+ */
+ nand_writel(info, NDCB0, info->ndcb0);
+ nand_writel(info, NDCB0, info->ndcb1);
+ nand_writel(info, NDCB0, info->ndcb2);
+
+ /* NDCB3 register is available in NFCv2 (Armada 370/XP SoC) */
+ if (info->variant == PXA3XX_NAND_VARIANT_ARMADA370)
+ nand_writel(info, NDCB0, info->ndcb3);
+ }
+
+ /* clear NDSR to let the controller exit the IRQ */
+ nand_writel(info, NDSR, status);
+ if (is_completed)
+ info->cmd_complete = 1;
+ if (is_ready)
+ info->dev_ready = 1;
+
+ return ret;
+}
+
+static inline int is_buf_blank(uint8_t *buf, size_t len)
+{
+ for (; len > 0; len--)
+ if (*buf++ != 0xff)
+ return 0;
+ return 1;
+}
+
+static void set_command_address(struct pxa3xx_nand_info *info,
+ unsigned int page_size, uint16_t column, int page_addr)
+{
+ /* small page addr setting */
+ if (page_size < PAGE_CHUNK_SIZE) {
+ info->ndcb1 = ((page_addr & 0xFFFFFF) << 8)
+ | (column & 0xFF);
+
+ info->ndcb2 = 0;
+ } else {
+ info->ndcb1 = ((page_addr & 0xFFFF) << 16)
+ | (column & 0xFFFF);
+
+ if (page_addr & 0xFF0000)
+ info->ndcb2 = (page_addr & 0xFF0000) >> 16;
+ else
+ info->ndcb2 = 0;
+ }
+}
+
+static void prepare_start_command(struct pxa3xx_nand_info *info, int command)
+{
+ struct pxa3xx_nand_host *host = info->host[info->cs];
+ struct mtd_info *mtd = host->mtd;
+
+ /* reset data and oob column point to handle data */
+ info->buf_start = 0;
+ info->buf_count = 0;
+ info->oob_size = 0;
+ info->data_buff_pos = 0;
+ info->oob_buff_pos = 0;
+ info->use_ecc = 0;
+ info->use_spare = 1;
+ info->retcode = ERR_NONE;
+ info->ecc_err_cnt = 0;
+ info->ndcb3 = 0;
+ info->need_wait = 0;
+
+ switch (command) {
+ case NAND_CMD_READ0:
+ case NAND_CMD_PAGEPROG:
+ info->use_ecc = 1;
+ case NAND_CMD_READOOB:
+ pxa3xx_set_datasize(info, mtd);
+ break;
+ case NAND_CMD_PARAM:
+ info->use_spare = 0;
+ break;
+ default:
+ info->ndcb1 = 0;
+ info->ndcb2 = 0;
+ break;
+ }
+
+ /*
+ * If we are about to issue a read command, or about to set
+ * the write address, then clean the data buffer.
+ */
+ if (command == NAND_CMD_READ0 ||
+ command == NAND_CMD_READOOB ||
+ command == NAND_CMD_SEQIN) {
+ info->buf_count = mtd->writesize + mtd->oobsize;
+ memset(info->data_buff, 0xFF, info->buf_count);
+ }
+}
+
+static int prepare_set_command(struct pxa3xx_nand_info *info, int command,
+ int ext_cmd_type, uint16_t column, int page_addr)
+{
+ int addr_cycle, exec_cmd;
+ struct pxa3xx_nand_host *host;
+ struct mtd_info *mtd;
+
+ host = info->host[info->cs];
+ mtd = host->mtd;
+ addr_cycle = 0;
+ exec_cmd = 1;
+
+ if (info->cs != 0)
+ info->ndcb0 = NDCB0_CSEL;
+ else
+ info->ndcb0 = 0;
+
+ if (command == NAND_CMD_SEQIN)
+ exec_cmd = 0;
+
+ addr_cycle = NDCB0_ADDR_CYC(host->row_addr_cycles
+ + host->col_addr_cycles);
+
+ switch (command) {
+ case NAND_CMD_READOOB:
+ case NAND_CMD_READ0:
+ info->buf_start = column;
+ info->ndcb0 |= NDCB0_CMD_TYPE(0)
+ | addr_cycle
+ | NAND_CMD_READ0;
+
+ if (command == NAND_CMD_READOOB)
+ info->buf_start += mtd->writesize;
+
+ /*
+ * Multiple page read needs an 'extended command type' field,
+ * which is either naked-read or last-read according to the
+ * state.
+ */
+ if (mtd->writesize == PAGE_CHUNK_SIZE) {
+ info->ndcb0 |= NDCB0_DBC | (NAND_CMD_READSTART << 8);
+ } else if (mtd->writesize > PAGE_CHUNK_SIZE) {
+ info->ndcb0 |= NDCB0_DBC | (NAND_CMD_READSTART << 8)
+ | NDCB0_LEN_OVRD
+ | NDCB0_EXT_CMD_TYPE(ext_cmd_type);
+ info->ndcb3 = info->chunk_size +
+ info->oob_size;
+ }
+
+ set_command_address(info, mtd->writesize, column, page_addr);
+ break;
+
+ case NAND_CMD_SEQIN:
+
+ info->buf_start = column;
+ set_command_address(info, mtd->writesize, 0, page_addr);
+
+ /*
+ * Multiple page programming needs to execute the initial
+ * SEQIN command that sets the page address.
+ */
+ if (mtd->writesize > PAGE_CHUNK_SIZE) {
+ info->ndcb0 |= NDCB0_CMD_TYPE(0x1)
+ | NDCB0_EXT_CMD_TYPE(ext_cmd_type)
+ | addr_cycle
+ | command;
+ /* No data transfer in this case */
+ info->data_size = 0;
+ exec_cmd = 1;
+ }
+ break;
+
+ case NAND_CMD_PAGEPROG:
+ if (is_buf_blank(info->data_buff,
+ (mtd->writesize + mtd->oobsize))) {
+ exec_cmd = 0;
+ break;
+ }
+
+ /* Second command setting for large pages */
+ if (mtd->writesize > PAGE_CHUNK_SIZE) {
+ /*
+ * Multiple page write uses the 'extended command'
+ * field. This can be used to issue a command dispatch
+ * or a naked-write depending on the current stage.
+ */
+ info->ndcb0 |= NDCB0_CMD_TYPE(0x1)
+ | NDCB0_LEN_OVRD
+ | NDCB0_EXT_CMD_TYPE(ext_cmd_type);
+ info->ndcb3 = info->chunk_size +
+ info->oob_size;
+
+ /*
+ * This is the command dispatch that completes a chunked
+ * page program operation.
+ */
+ if (info->data_size == 0) {
+ info->ndcb0 = NDCB0_CMD_TYPE(0x1)
+ | NDCB0_EXT_CMD_TYPE(ext_cmd_type)
+ | command;
+ info->ndcb1 = 0;
+ info->ndcb2 = 0;
+ info->ndcb3 = 0;
+ }
+ } else {
+ info->ndcb0 |= NDCB0_CMD_TYPE(0x1)
+ | NDCB0_AUTO_RS
+ | NDCB0_ST_ROW_EN
+ | NDCB0_DBC
+ | (NAND_CMD_PAGEPROG << 8)
+ | NAND_CMD_SEQIN
+ | addr_cycle;
+ }
+ break;
+
+ case NAND_CMD_PARAM:
+ info->buf_count = 256;
+ info->ndcb0 |= NDCB0_CMD_TYPE(0)
+ | NDCB0_ADDR_CYC(1)
+ | NDCB0_LEN_OVRD
+ | command;
+ info->ndcb1 = (column & 0xFF);
+ info->ndcb3 = 256;
+ info->data_size = 256;
+ break;
+
+ case NAND_CMD_READID:
+ info->buf_count = host->read_id_bytes;
+ info->ndcb0 |= NDCB0_CMD_TYPE(3)
+ | NDCB0_ADDR_CYC(1)
+ | command;
+ info->ndcb1 = (column & 0xFF);
+
+ info->data_size = 8;
+ break;
+ case NAND_CMD_STATUS:
+ info->buf_count = 1;
+ info->ndcb0 |= NDCB0_CMD_TYPE(4)
+ | NDCB0_ADDR_CYC(1)
+ | command;
+
+ info->data_size = 8;
+ break;
+
+ case NAND_CMD_ERASE1:
+ info->ndcb0 |= NDCB0_CMD_TYPE(2)
+ | NDCB0_AUTO_RS
+ | NDCB0_ADDR_CYC(3)
+ | NDCB0_DBC
+ | (NAND_CMD_ERASE2 << 8)
+ | NAND_CMD_ERASE1;
+ info->ndcb1 = page_addr;
+ info->ndcb2 = 0;
+
+ break;
+ case NAND_CMD_RESET:
+ info->ndcb0 |= NDCB0_CMD_TYPE(5)
+ | command;
+
+ break;
+
+ case NAND_CMD_ERASE2:
+ exec_cmd = 0;
+ break;
+
+ default:
+ exec_cmd = 0;
+ dev_err(&info->pdev->dev, "non-supported command %x\n",
+ command);
+ break;
+ }
+
+ return exec_cmd;
+}
+
+static void nand_cmdfunc(struct mtd_info *mtd, unsigned command,
+ int column, int page_addr)
+{
+ struct pxa3xx_nand_host *host = mtd->priv;
+ struct pxa3xx_nand_info *info = host->info_data;
+ int exec_cmd;
+
+ /*
+ * if this is a x16 device ,then convert the input
+ * "byte" address into a "word" address appropriate
+ * for indexing a word-oriented device
+ */
+ if (info->reg_ndcr & NDCR_DWIDTH_M)
+ column /= 2;
+
+ /*
+ * There may be different NAND chip hooked to
+ * different chip select, so check whether
+ * chip select has been changed, if yes, reset the timing
+ */
+ if (info->cs != host->cs) {
+ info->cs = host->cs;
+ nand_writel(info, NDTR0CS0, info->ndtr0cs0);
+ nand_writel(info, NDTR1CS0, info->ndtr1cs0);
+ }
+
+ prepare_start_command(info, command);
+
+ info->state = STATE_PREPARED;
+ exec_cmd = prepare_set_command(info, command, 0, column, page_addr);
+
+ if (exec_cmd) {
+ u32 ts;
+
+ info->cmd_complete = 0;
+ info->dev_ready = 0;
+ info->need_wait = 1;
+ pxa3xx_nand_start(info);
+
+ ts = get_timer(0);
+ while (1) {
+ u32 status;
+
+ status = nand_readl(info, NDSR);
+ if (status)
+ pxa3xx_nand_irq(info);
+
+ if (info->cmd_complete)
+ break;
+
+ if (get_timer(ts) > CHIP_DELAY_TIMEOUT) {
+ dev_err(&info->pdev->dev, "Wait timeout!!!\n");
+ return;
+ }
+ }
+ }
+ info->state = STATE_IDLE;
+}
+
+static void nand_cmdfunc_extended(struct mtd_info *mtd,
+ const unsigned command,
+ int column, int page_addr)
+{
+ struct pxa3xx_nand_host *host = mtd->priv;
+ struct pxa3xx_nand_info *info = host->info_data;
+ int exec_cmd, ext_cmd_type;
+
+ /*
+ * if this is a x16 device then convert the input
+ * "byte" address into a "word" address appropriate
+ * for indexing a word-oriented device
+ */
+ if (info->reg_ndcr & NDCR_DWIDTH_M)
+ column /= 2;
+
+ /*
+ * There may be different NAND chip hooked to
+ * different chip select, so check whether
+ * chip select has been changed, if yes, reset the timing
+ */
+ if (info->cs != host->cs) {
+ info->cs = host->cs;
+ nand_writel(info, NDTR0CS0, info->ndtr0cs0);
+ nand_writel(info, NDTR1CS0, info->ndtr1cs0);
+ }
+
+ /* Select the extended command for the first command */
+ switch (command) {
+ case NAND_CMD_READ0:
+ case NAND_CMD_READOOB:
+ ext_cmd_type = EXT_CMD_TYPE_MONO;
+ break;
+ case NAND_CMD_SEQIN:
+ ext_cmd_type = EXT_CMD_TYPE_DISPATCH;
+ break;
+ case NAND_CMD_PAGEPROG:
+ ext_cmd_type = EXT_CMD_TYPE_NAKED_RW;
+ break;
+ default:
+ ext_cmd_type = 0;
+ break;
+ }
+
+ prepare_start_command(info, command);
+
+ /*
+ * Prepare the "is ready" completion before starting a command
+ * transaction sequence. If the command is not executed the
+ * completion will be completed, see below.
+ *
+ * We can do that inside the loop because the command variable
+ * is invariant and thus so is the exec_cmd.
+ */
+ info->need_wait = 1;
+ info->dev_ready = 0;
+
+ do {
+ u32 ts;
+
+ info->state = STATE_PREPARED;
+ exec_cmd = prepare_set_command(info, command, ext_cmd_type,
+ column, page_addr);
+ if (!exec_cmd) {
+ info->need_wait = 0;
+ info->dev_ready = 1;
+ break;
+ }
+
+ info->cmd_complete = 0;
+ pxa3xx_nand_start(info);
+
+ ts = get_timer(0);
+ while (1) {
+ u32 status;
+
+ status = nand_readl(info, NDSR);
+ if (status)
+ pxa3xx_nand_irq(info);
+
+ if (info->cmd_complete)
+ break;
+
+ if (get_timer(ts) > CHIP_DELAY_TIMEOUT) {
+ dev_err(&info->pdev->dev, "Wait timeout!!!\n");
+ return;
+ }
+ }
+
+ /* Check if the sequence is complete */
+ if (info->data_size == 0 && command != NAND_CMD_PAGEPROG)
+ break;
+
+ /*
+ * After a splitted program command sequence has issued
+ * the command dispatch, the command sequence is complete.
+ */
+ if (info->data_size == 0 &&
+ command == NAND_CMD_PAGEPROG &&
+ ext_cmd_type == EXT_CMD_TYPE_DISPATCH)
+ break;
+
+ if (command == NAND_CMD_READ0 || command == NAND_CMD_READOOB) {
+ /* Last read: issue a 'last naked read' */
+ if (info->data_size == info->chunk_size)
+ ext_cmd_type = EXT_CMD_TYPE_LAST_RW;
+ else
+ ext_cmd_type = EXT_CMD_TYPE_NAKED_RW;
+
+ /*
+ * If a splitted program command has no more data to transfer,
+ * the command dispatch must be issued to complete.
+ */
+ } else if (command == NAND_CMD_PAGEPROG &&
+ info->data_size == 0) {
+ ext_cmd_type = EXT_CMD_TYPE_DISPATCH;
+ }
+ } while (1);
+
+ info->state = STATE_IDLE;
+}
+
+static int pxa3xx_nand_write_page_hwecc(struct mtd_info *mtd,
+ struct nand_chip *chip, const uint8_t *buf, int oob_required)
+{
+ chip->write_buf(mtd, buf, mtd->writesize);
+ chip->write_buf(mtd, chip->oob_poi, mtd->oobsize);
+
+ return 0;
+}
+
+static int pxa3xx_nand_read_page_hwecc(struct mtd_info *mtd,
+ struct nand_chip *chip, uint8_t *buf, int oob_required,
+ int page)
+{
+ struct pxa3xx_nand_host *host = mtd->priv;
+ struct pxa3xx_nand_info *info = host->info_data;
+
+ chip->read_buf(mtd, buf, mtd->writesize);
+ chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
+
+ if (info->retcode == ERR_CORERR && info->use_ecc) {
+ mtd->ecc_stats.corrected += info->ecc_err_cnt;
+
+ } else if (info->retcode == ERR_UNCORERR) {
+ /*
+ * for blank page (all 0xff), HW will calculate its ECC as
+ * 0, which is different from the ECC information within
+ * OOB, ignore such uncorrectable errors
+ */
+ if (is_buf_blank(buf, mtd->writesize))
+ info->retcode = ERR_NONE;
+ else
+ mtd->ecc_stats.failed++;
+ }
+
+ return info->max_bitflips;
+}
+
+static uint8_t pxa3xx_nand_read_byte(struct mtd_info *mtd)
+{
+ struct pxa3xx_nand_host *host = mtd->priv;
+ struct pxa3xx_nand_info *info = host->info_data;
+ char retval = 0xFF;
+
+ if (info->buf_start < info->buf_count)
+ /* Has just send a new command? */
+ retval = info->data_buff[info->buf_start++];
+
+ return retval;
+}
+
+static u16 pxa3xx_nand_read_word(struct mtd_info *mtd)
+{
+ struct pxa3xx_nand_host *host = mtd->priv;
+ struct pxa3xx_nand_info *info = host->info_data;
+ u16 retval = 0xFFFF;
+
+ if (!(info->buf_start & 0x01) && info->buf_start < info->buf_count) {
+ retval = *((u16 *)(info->data_buff+info->buf_start));
+ info->buf_start += 2;
+ }
+ return retval;
+}
+
+static void pxa3xx_nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
+{
+ struct pxa3xx_nand_host *host = mtd->priv;
+ struct pxa3xx_nand_info *info = host->info_data;
+ int real_len = min_t(size_t, len, info->buf_count - info->buf_start);
+
+ memcpy(buf, info->data_buff + info->buf_start, real_len);
+ info->buf_start += real_len;
+}
+
+static void pxa3xx_nand_write_buf(struct mtd_info *mtd,
+ const uint8_t *buf, int len)
+{
+ struct pxa3xx_nand_host *host = mtd->priv;
+ struct pxa3xx_nand_info *info = host->info_data;
+ int real_len = min_t(size_t, len, info->buf_count - info->buf_start);
+
+ memcpy(info->data_buff + info->buf_start, buf, real_len);
+ info->buf_start += real_len;
+}
+
+static void pxa3xx_nand_select_chip(struct mtd_info *mtd, int chip)
+{
+ return;
+}
+
+static int pxa3xx_nand_waitfunc(struct mtd_info *mtd, struct nand_chip *this)
+{
+ struct pxa3xx_nand_host *host = mtd->priv;
+ struct pxa3xx_nand_info *info = host->info_data;
+
+ if (info->need_wait) {
+ u32 ts;
+
+ info->need_wait = 0;
+
+ ts = get_timer(0);
+ while (1) {
+ u32 status;
+
+ status = nand_readl(info, NDSR);
+ if (status)
+ pxa3xx_nand_irq(info);
+
+ if (info->dev_ready)
+ break;
+
+ if (get_timer(ts) > CHIP_DELAY_TIMEOUT) {
+ dev_err(&info->pdev->dev, "Ready timeout!!!\n");
+ return NAND_STATUS_FAIL;
+ }
+ }
+ }
+
+ /* pxa3xx_nand_send_command has waited for command complete */
+ if (this->state == FL_WRITING || this->state == FL_ERASING) {
+ if (info->retcode == ERR_NONE)
+ return 0;
+ else
+ return NAND_STATUS_FAIL;
+ }
+
+ return NAND_STATUS_READY;
+}
+
+static int pxa3xx_nand_config_flash(struct pxa3xx_nand_info *info)
+{
+ struct pxa3xx_nand_host *host = info->host[info->cs];
+ struct mtd_info *mtd = host->mtd;
+ struct nand_chip *chip = mtd->priv;
+
+ info->reg_ndcr |= (host->col_addr_cycles == 2) ? NDCR_RA_START : 0;
+ info->reg_ndcr |= (chip->page_shift == 6) ? NDCR_PG_PER_BLK : 0;
+ info->reg_ndcr |= (mtd->writesize == 2048) ? NDCR_PAGE_SZ : 0;
+
+ return 0;
+}
+
+static int pxa3xx_nand_detect_config(struct pxa3xx_nand_info *info)
+{
+ /*
+ * We set 0 by hard coding here, for we don't support keep_config
+ * when there is more than one chip attached to the controller
+ */
+ struct pxa3xx_nand_host *host = info->host[0];
+ uint32_t ndcr = nand_readl(info, NDCR);
+
+ if (ndcr & NDCR_PAGE_SZ) {
+ /* Controller's FIFO size */
+ info->chunk_size = 2048;
+ host->read_id_bytes = 4;
+ } else {
+ info->chunk_size = 512;
+ host->read_id_bytes = 2;
+ }
+
+ /* Set an initial chunk size */
+ info->reg_ndcr = ndcr & ~NDCR_INT_MASK;
+ info->ndtr0cs0 = nand_readl(info, NDTR0CS0);
+ info->ndtr1cs0 = nand_readl(info, NDTR1CS0);
+ return 0;
+}
+
+static int pxa3xx_nand_init_buff(struct pxa3xx_nand_info *info)
+{
+ info->data_buff = kmalloc(info->buf_size, GFP_KERNEL);
+ if (info->data_buff == NULL)
+ return -ENOMEM;
+ return 0;
+}
+
+static int pxa3xx_nand_sensing(struct pxa3xx_nand_host *host)
+{
+ struct pxa3xx_nand_info *info = host->info_data;
+ struct pxa3xx_nand_platform_data *pdata = info->pdata;
+ struct mtd_info *mtd;
+ struct nand_chip *chip;
+ const struct nand_sdr_timings *timings;
+ int ret;
+
+ mtd = info->host[info->cs]->mtd;
+ chip = mtd->priv;
+
+ /* configure default flash values */
+ info->reg_ndcr = 0x0; /* enable all interrupts */
+ info->reg_ndcr |= (pdata->enable_arbiter) ? NDCR_ND_ARB_EN : 0;
+ info->reg_ndcr |= NDCR_RD_ID_CNT(host->read_id_bytes);
+ info->reg_ndcr |= NDCR_SPARE_EN; /* enable spare by default */
+
+ /* use the common timing to make a try */
+ timings = onfi_async_timing_mode_to_sdr_timings(0);
+ if (IS_ERR(timings))
+ return PTR_ERR(timings);
+
+ pxa3xx_nand_set_sdr_timing(host, timings);
+
+ chip->cmdfunc(mtd, NAND_CMD_RESET, 0, 0);
+ ret = chip->waitfunc(mtd, chip);
+ if (ret & NAND_STATUS_FAIL)
+ return -ENODEV;
+
+ return 0;
+}
+
+static int pxa_ecc_init(struct pxa3xx_nand_info *info,
+ struct nand_ecc_ctrl *ecc,
+ int strength, int ecc_stepsize, int page_size)
+{
+ if (strength == 1 && ecc_stepsize == 512 && page_size == 2048) {
+ info->chunk_size = 2048;
+ info->spare_size = 40;
+ info->ecc_size = 24;
+ ecc->mode = NAND_ECC_HW;
+ ecc->size = 512;
+ ecc->strength = 1;
+
+ } else if (strength == 1 && ecc_stepsize == 512 && page_size == 512) {
+ info->chunk_size = 512;
+ info->spare_size = 8;
+ info->ecc_size = 8;
+ ecc->mode = NAND_ECC_HW;
+ ecc->size = 512;
+ ecc->strength = 1;
+
+ /*
+ * Required ECC: 4-bit correction per 512 bytes
+ * Select: 16-bit correction per 2048 bytes
+ */
+ } else if (strength == 4 && ecc_stepsize == 512 && page_size == 2048) {
+ info->ecc_bch = 1;
+ info->chunk_size = 2048;
+ info->spare_size = 32;
+ info->ecc_size = 32;
+ ecc->mode = NAND_ECC_HW;
+ ecc->size = info->chunk_size;
+ ecc->layout = &ecc_layout_2KB_bch4bit;
+ ecc->strength = 16;
+
+ } else if (strength == 4 && ecc_stepsize == 512 && page_size == 4096) {
+ info->ecc_bch = 1;
+ info->chunk_size = 2048;
+ info->spare_size = 32;
+ info->ecc_size = 32;
+ ecc->mode = NAND_ECC_HW;
+ ecc->size = info->chunk_size;
+ ecc->layout = &ecc_layout_4KB_bch4bit;
+ ecc->strength = 16;
+
+ /*
+ * Required ECC: 8-bit correction per 512 bytes
+ * Select: 16-bit correction per 1024 bytes
+ */
+ } else if (strength == 8 && ecc_stepsize == 512 && page_size == 4096) {
+ info->ecc_bch = 1;
+ info->chunk_size = 1024;
+ info->spare_size = 0;
+ info->ecc_size = 32;
+ ecc->mode = NAND_ECC_HW;
+ ecc->size = info->chunk_size;
+ ecc->layout = &ecc_layout_4KB_bch8bit;
+ ecc->strength = 16;
+ } else {
+ dev_err(&info->pdev->dev,
+ "ECC strength %d at page size %d is not supported\n",
+ strength, page_size);
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static int pxa3xx_nand_scan(struct mtd_info *mtd)
+{
+ struct pxa3xx_nand_host *host = mtd->priv;
+ struct pxa3xx_nand_info *info = host->info_data;
+ struct pxa3xx_nand_platform_data *pdata = info->pdata;
+ struct nand_chip *chip = mtd->priv;
+ int ret;
+ uint16_t ecc_strength, ecc_step;
+
+ if (pdata->keep_config && !pxa3xx_nand_detect_config(info))
+ goto KEEP_CONFIG;
+
+ /* Set a default chunk size */
+ info->chunk_size = 512;
+
+ ret = pxa3xx_nand_sensing(host);
+ if (ret) {
+ dev_info(&info->pdev->dev, "There is no chip on cs %d!\n",
+ info->cs);
+
+ return ret;
+ }
+
+KEEP_CONFIG:
+ /* Device detection must be done with ECC disabled */
+ if (info->variant == PXA3XX_NAND_VARIANT_ARMADA370)
+ nand_writel(info, NDECCCTRL, 0x0);
+
+ if (nand_scan_ident(mtd, 1, NULL))
+ return -ENODEV;
+
+ if (!pdata->keep_config) {
+ ret = pxa3xx_nand_init_timings(host);
+ if (ret) {
+ dev_err(&info->pdev->dev,
+ "Failed to set timings: %d\n", ret);
+ return ret;
+ }
+ }
+
+ ret = pxa3xx_nand_config_flash(info);
+ if (ret)
+ return ret;
+
+#ifdef CONFIG_SYS_NAND_USE_FLASH_BBT
+ /*
+ * We'll use a bad block table stored in-flash and don't
+ * allow writing the bad block marker to the flash.
+ */
+ chip->bbt_options |= NAND_BBT_USE_FLASH | NAND_BBT_NO_OOB_BBM;
+ chip->bbt_td = &bbt_main_descr;
+ chip->bbt_md = &bbt_mirror_descr;
+#endif
+
+ /*
+ * If the page size is bigger than the FIFO size, let's check
+ * we are given the right variant and then switch to the extended
+ * (aka splitted) command handling,
+ */
+ if (mtd->writesize > PAGE_CHUNK_SIZE) {
+ if (info->variant == PXA3XX_NAND_VARIANT_ARMADA370) {
+ chip->cmdfunc = nand_cmdfunc_extended;
+ } else {
+ dev_err(&info->pdev->dev,
+ "unsupported page size on this variant\n");
+ return -ENODEV;
+ }
+ }
+
+ if (pdata->ecc_strength && pdata->ecc_step_size) {
+ ecc_strength = pdata->ecc_strength;
+ ecc_step = pdata->ecc_step_size;
+ } else {
+ ecc_strength = chip->ecc_strength_ds;
+ ecc_step = chip->ecc_step_ds;
+ }
+
+ /* Set default ECC strength requirements on non-ONFI devices */
+ if (ecc_strength < 1 && ecc_step < 1) {
+ ecc_strength = 1;
+ ecc_step = 512;
+ }
+
+ ret = pxa_ecc_init(info, &chip->ecc, ecc_strength,
+ ecc_step, mtd->writesize);
+ if (ret)
+ return ret;
+
+ /* calculate addressing information */
+ if (mtd->writesize >= 2048)
+ host->col_addr_cycles = 2;
+ else
+ host->col_addr_cycles = 1;
+
+ /* release the initial buffer */
+ kfree(info->data_buff);
+
+ /* allocate the real data + oob buffer */
+ info->buf_size = mtd->writesize + mtd->oobsize;
+ ret = pxa3xx_nand_init_buff(info);
+ if (ret)
+ return ret;
+ info->oob_buff = info->data_buff + mtd->writesize;
+
+ if ((mtd->size >> chip->page_shift) > 65536)
+ host->row_addr_cycles = 3;
+ else
+ host->row_addr_cycles = 2;
+ return nand_scan_tail(mtd);
+}
+
+static int alloc_nand_resource(struct pxa3xx_nand_info *info)
+{
+ struct pxa3xx_nand_platform_data *pdata;
+ struct pxa3xx_nand_host *host;
+ struct nand_chip *chip = NULL;
+ struct mtd_info *mtd;
+ int ret, cs;
+
+ pdata = info->pdata;
+ if (pdata->num_cs <= 0)
+ return -ENODEV;
+
+ info->variant = pxa3xx_nand_get_variant();
+ for (cs = 0; cs < pdata->num_cs; cs++) {
+ mtd = &nand_info[cs];
+ chip = (struct nand_chip *)info +
+ sizeof(struct pxa3xx_nand_host);
+ host = (struct pxa3xx_nand_host *)chip;
+ info->host[cs] = host;
+ host->mtd = mtd;
+ host->cs = cs;
+ host->info_data = info;
+ host->read_id_bytes = 4;
+ mtd->priv = host;
+ mtd->owner = THIS_MODULE;
+
+ chip->ecc.read_page = pxa3xx_nand_read_page_hwecc;
+ chip->ecc.write_page = pxa3xx_nand_write_page_hwecc;
+ chip->controller = &info->controller;
+ chip->waitfunc = pxa3xx_nand_waitfunc;
+ chip->select_chip = pxa3xx_nand_select_chip;
+ chip->read_word = pxa3xx_nand_read_word;
+ chip->read_byte = pxa3xx_nand_read_byte;
+ chip->read_buf = pxa3xx_nand_read_buf;
+ chip->write_buf = pxa3xx_nand_write_buf;
+ chip->options |= NAND_NO_SUBPAGE_WRITE;
+ chip->cmdfunc = nand_cmdfunc;
+ }
+
+ info->mmio_base = (void __iomem *)MVEBU_NAND_BASE;
+
+ /* Allocate a buffer to allow flash detection */
+ info->buf_size = INIT_BUFFER_SIZE;
+ info->data_buff = kmalloc(info->buf_size, GFP_KERNEL);
+ if (info->data_buff == NULL) {
+ ret = -ENOMEM;
+ goto fail_disable_clk;
+ }
+
+ /* initialize all interrupts to be disabled */
+ disable_int(info, NDSR_MASK);
+
+ return 0;
+
+ kfree(info->data_buff);
+fail_disable_clk:
+ return ret;
+}
+
+static int pxa3xx_nand_probe_dt(struct pxa3xx_nand_info *info)
+{
+ struct pxa3xx_nand_platform_data *pdata;
+
+ pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);
+ if (!pdata)
+ return -ENOMEM;
+
+ pdata->enable_arbiter = 1;
+ pdata->num_cs = 1;
+
+ info->pdata = pdata;
+
+ return 0;
+}
+
+static int pxa3xx_nand_probe(struct pxa3xx_nand_info *info)
+{
+ struct pxa3xx_nand_platform_data *pdata;
+ int ret, cs, probe_success;
+
+ ret = pxa3xx_nand_probe_dt(info);
+ if (ret)
+ return ret;
+
+ pdata = info->pdata;
+
+ ret = alloc_nand_resource(info);
+ if (ret) {
+ dev_err(&pdev->dev, "alloc nand resource failed\n");
+ return ret;
+ }
+
+ probe_success = 0;
+ for (cs = 0; cs < pdata->num_cs; cs++) {
+ struct mtd_info *mtd = info->host[cs]->mtd;
+
+ /*
+ * The mtd name matches the one used in 'mtdparts' kernel
+ * parameter. This name cannot be changed or otherwise
+ * user's mtd partitions configuration would get broken.
+ */
+ mtd->name = "pxa3xx_nand-0";
+ info->cs = cs;
+ ret = pxa3xx_nand_scan(mtd);
+ if (ret) {
+ dev_info(&pdev->dev, "failed to scan nand at cs %d\n",
+ cs);
+ continue;
+ }
+
+ if (!ret)
+ probe_success = 1;
+ }
+
+ if (!probe_success)
+ return -ENODEV;
+
+ return 0;
+}
+
+/*
+ * Main initialization routine
+ */
+void board_nand_init(void)
+{
+ struct pxa3xx_nand_info *info;
+ struct pxa3xx_nand_host *host;
+ int ret;
+
+ info = kzalloc(sizeof(*info) + (sizeof(struct mtd_info) +
+ sizeof(*host)) *
+ CONFIG_SYS_MAX_NAND_DEVICE, GFP_KERNEL);
+ if (!info)
+ return;
+
+ /*
+ * If CONFIG_SYS_NAND_SELF_INIT is defined, each driver is responsible
+ * for instantiating struct nand_chip, while drivers/mtd/nand/nand.c
+ * still provides a "struct mtd_info nand_info" instance.
+ */
+ info->host[0]->mtd = &nand_info[0];
+
+ ret = pxa3xx_nand_probe(info);
+ if (ret)
+ return;
+
+ nand_register(0);
+}
diff --git a/drivers/mtd/nand/pxa3xx_nand.h b/drivers/mtd/nand/pxa3xx_nand.h
new file mode 100644
index 0000000..8f24ae6
--- /dev/null
+++ b/drivers/mtd/nand/pxa3xx_nand.h
@@ -0,0 +1,64 @@
+#ifndef __ASM_ARCH_PXA3XX_NAND_H
+#define __ASM_ARCH_PXA3XX_NAND_H
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+struct pxa3xx_nand_timing {
+ unsigned int tCH; /* Enable signal hold time */
+ unsigned int tCS; /* Enable signal setup time */
+ unsigned int tWH; /* ND_nWE high duration */
+ unsigned int tWP; /* ND_nWE pulse time */
+ unsigned int tRH; /* ND_nRE high duration */
+ unsigned int tRP; /* ND_nRE pulse width */
+ unsigned int tR; /* ND_nWE high to ND_nRE low for read */
+ unsigned int tWHR; /* ND_nWE high to ND_nRE low for status read */
+ unsigned int tAR; /* ND_ALE low to ND_nRE low delay */
+};
+
+struct pxa3xx_nand_flash {
+ uint32_t chip_id;
+ unsigned int flash_width; /* Width of Flash memory (DWIDTH_M) */
+ unsigned int dfc_width; /* Width of flash controller(DWIDTH_C) */
+ struct pxa3xx_nand_timing *timing; /* NAND Flash timing */
+};
+
+/*
+ * Current pxa3xx_nand controller has two chip select which
+ * both be workable.
+ *
+ * Notice should be taken that:
+ * When you want to use this feature, you should not enable the
+ * keep configuration feature, for two chip select could be
+ * attached with different nand chip. The different page size
+ * and timing requirement make the keep configuration impossible.
+ */
+
+/* The max num of chip select current support */
+#define NUM_CHIP_SELECT (2)
+struct pxa3xx_nand_platform_data {
+ /* the data flash bus is shared between the Static Memory
+ * Controller and the Data Flash Controller, the arbiter
+ * controls the ownership of the bus
+ */
+ int enable_arbiter;
+
+ /* allow platform code to keep OBM/bootloader defined NFC config */
+ int keep_config;
+
+ /* indicate how many chip selects will be used */
+ int num_cs;
+
+ /* use an flash-based bad block table */
+ bool flash_bbt;
+
+ /* requested ECC strength and ECC step size */
+ int ecc_strength, ecc_step_size;
+
+ const struct mtd_partition *parts[NUM_CHIP_SELECT];
+ unsigned int nr_parts[NUM_CHIP_SELECT];
+
+ const struct pxa3xx_nand_flash *flash;
+ size_t num_flash;
+};
+#endif /* __ASM_ARCH_PXA3XX_NAND_H */
diff --git a/include/configs/db-mv784mp-gp.h b/include/configs/db-mv784mp-gp.h
index eec2ba9..f612e72 100644
--- a/include/configs/db-mv784mp-gp.h
+++ b/include/configs/db-mv784mp-gp.h
@@ -33,6 +33,7 @@
#define CONFIG_CMD_ENV
#define CONFIG_CMD_I2C
#define CONFIG_CMD_IDE
+#define CONFIG_CMD_NAND
#define CONFIG_CMD_PCI
#define CONFIG_CMD_PING
#define CONFIG_CMD_SF
@@ -110,6 +111,10 @@
#define CONFIG_PCI_SCAN_SHOW
#define CONFIG_E1000 /* enable Intel E1000 support for testing */
+/* NAND */
+#define CONFIG_SYS_NAND_USE_FLASH_BBT
+#define CONFIG_SYS_NAND_ONFI_DETECTION
+
/*
* mv-common.h should be defined after CMD configs since it used them
* to enable certain macros
diff --git a/include/fsl_ifc.h b/include/fsl_ifc.h
index a7ddd5f..a86f216 100644
--- a/include/fsl_ifc.h
+++ b/include/fsl_ifc.h
@@ -19,10 +19,12 @@
#define ifc_in32(a) in_le32(a)
#define ifc_out32(a, v) out_le32(a, v)
#define ifc_in16(a) in_le16(a)
+#define ifc_out16(a, v) out_le16(a, v)
#elif defined(CONFIG_SYS_FSL_IFC_BE)
#define ifc_in32(a) in_be32(a)
#define ifc_out32(a, v) out_be32(a, v)
#define ifc_in16(a) in_be16(a)
+#define ifc_out16(a, v) out_be16(a, v)
#else
#error Neither CONFIG_SYS_FSL_IFC_LE nor CONFIG_SYS_FSL_IFC_BE is defined
#endif
diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h
index 552d4d6..bc4d9bf 100644
--- a/include/linux/mtd/mtd.h
+++ b/include/linux/mtd/mtd.h
@@ -101,7 +101,7 @@
#ifdef CONFIG_SYS_NAND_MAX_ECCPOS
#define MTD_MAX_ECCPOS_ENTRIES_LARGE CONFIG_SYS_NAND_MAX_ECCPOS
#else
-#define MTD_MAX_ECCPOS_ENTRIES_LARGE 640
+#define MTD_MAX_ECCPOS_ENTRIES_LARGE 680
#endif
/*
@@ -238,6 +238,7 @@
int (*_lock) (struct mtd_info *mtd, loff_t ofs, uint64_t len);
int (*_unlock) (struct mtd_info *mtd, loff_t ofs, uint64_t len);
int (*_is_locked) (struct mtd_info *mtd, loff_t ofs, uint64_t len);
+ int (*_block_isreserved) (struct mtd_info *mtd, loff_t ofs);
int (*_block_isbad) (struct mtd_info *mtd, loff_t ofs);
int (*_block_markbad) (struct mtd_info *mtd, loff_t ofs);
#ifndef __UBOOT__
@@ -328,6 +329,7 @@
int mtd_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len);
int mtd_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len);
int mtd_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len);
+int mtd_block_isreserved(struct mtd_info *mtd, loff_t ofs);
int mtd_block_isbad(struct mtd_info *mtd, loff_t ofs);
int mtd_block_markbad(struct mtd_info *mtd, loff_t ofs);
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index bc927ec..23072fd 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -16,20 +16,12 @@
#ifndef __LINUX_MTD_NAND_H
#define __LINUX_MTD_NAND_H
-#ifndef __UBOOT__
-#include <linux/wait.h>
-#include <linux/spinlock.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/flashchip.h>
-#include <linux/mtd/bbm.h>
-#else
#include "config.h"
#include "linux/compat.h"
#include "linux/mtd/mtd.h"
#include "linux/mtd/flashchip.h"
#include "linux/mtd/bbm.h"
-#endif
struct mtd_info;
struct nand_flash_dev;
@@ -49,24 +41,13 @@
/* Internal helper for board drivers which need to override command function */
extern void nand_wait_ready(struct mtd_info *mtd);
-#ifndef __UBOOT__
-/* locks all blocks present in the device */
-extern int nand_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len);
-
-/* unlocks specified locked blocks */
-extern int nand_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len);
-
-/* The maximum number of NAND chips in an array */
-#define NAND_MAX_CHIPS 8
-#else
/*
* This constant declares the max. oobsize / page, which
* is supported now. If you add a chip with bigger oobsize/page
* adjust this accordingly.
*/
-#define NAND_MAX_OOBSIZE 744
-#define NAND_MAX_PAGESIZE 8192
-#endif
+#define NAND_MAX_OOBSIZE 1216
+#define NAND_MAX_PAGESIZE 16384
/*
* Constants for hardware specific CLE/ALE/NCE function
@@ -473,9 +454,6 @@
struct nand_hw_control {
spinlock_t lock;
struct nand_chip *active;
-#ifndef __UBOOT__
- wait_queue_head_t wq;
-#endif
};
/**
@@ -494,8 +472,21 @@
* be provided if an hardware ECC is available
* @calculate: function for ECC calculation or readback from ECC hardware
* @correct: function for ECC correction, matching to ECC generator (sw/hw)
- * @read_page_raw: function to read a raw page without ECC
- * @write_page_raw: function to write a raw page without ECC
+ * @read_page_raw: function to read a raw page without ECC. This function
+ * should hide the specific layout used by the ECC
+ * controller and always return contiguous in-band and
+ * out-of-band data even if they're not stored
+ * contiguously on the NAND chip (e.g.
+ * NAND_ECC_HW_SYNDROME interleaves in-band and
+ * out-of-band data).
+ * @write_page_raw: function to write a raw page without ECC. This function
+ * should hide the specific layout used by the ECC
+ * controller and consider the passed data as contiguous
+ * in-band and out-of-band data. ECC controller is
+ * responsible for doing the appropriate transformations
+ * to adapt to its specific layout (e.g.
+ * NAND_ECC_HW_SYNDROME interleaves in-band and
+ * out-of-band data).
* @read_page: function to read a page according to the ECC generator
* requirements; returns maximum number of bitflips corrected in
* any single ECC step, 0 if bitflips uncorrectable, -EIO hw error
@@ -557,16 +548,10 @@
* consecutive order.
*/
struct nand_buffers {
-#ifndef __UBOOT__
- uint8_t *ecccalc;
- uint8_t *ecccode;
- uint8_t *databuf;
-#else
uint8_t ecccalc[ALIGN(NAND_MAX_OOBSIZE, ARCH_DMA_MINALIGN)];
uint8_t ecccode[ALIGN(NAND_MAX_OOBSIZE, ARCH_DMA_MINALIGN)];
uint8_t databuf[ALIGN(NAND_MAX_PAGESIZE + NAND_MAX_OOBSIZE,
ARCH_DMA_MINALIGN)];
-#endif
};
/**
@@ -603,8 +588,7 @@
* @ecc: [BOARDSPECIFIC] ECC control structure
* @buffers: buffer structure for read/write
* @hwcontrol: platform-specific hardware control structure
- * @erase_cmd: [INTERN] erase command write function, selectable due
- * to AND support.
+ * @erase: [REPLACEABLE] erase function
* @scan_bbt: [REPLACEABLE] function to scan bad block table
* @chip_delay: [BOARDSPECIFIC] chip dependent delay for transferring
* data from array to read regs (tR).
@@ -634,6 +618,11 @@
* @ecc_step_ds: [INTERN] ECC step required by the @ecc_strength_ds,
* also from the datasheet. It is the recommended ECC step
* size, if known; if unknown, set to zero.
+ * @onfi_timing_mode_default: [INTERN] default ONFI timing mode. This field is
+ * either deduced from the datasheet if the NAND
+ * chip is not ONFI compliant or set to 0 if it is
+ * (an ONFI chip is always configured in mode 0
+ * after a NAND reset)
* @numchips: [INTERN] number of physical chips
* @chipsize: [INTERN] the size of one chip for multichip arrays
* @pagemask: [INTERN] page number mask = number of (pages / chip) - 1
@@ -688,7 +677,7 @@
void (*cmdfunc)(struct mtd_info *mtd, unsigned command, int column,
int page_addr);
int(*waitfunc)(struct mtd_info *mtd, struct nand_chip *this);
- void (*erase_cmd)(struct mtd_info *mtd, int page);
+ int (*erase)(struct mtd_info *mtd, int page);
int (*scan_bbt)(struct mtd_info *mtd);
int (*errstat)(struct mtd_info *mtd, struct nand_chip *this, int state,
int status, int page);
@@ -718,6 +707,7 @@
uint8_t bits_per_cell;
uint16_t ecc_strength_ds;
uint16_t ecc_step_ds;
+ int onfi_timing_mode_default;
int badblockpos;
int badblockbits;
@@ -734,9 +724,7 @@
uint8_t *oob_poi;
struct nand_hw_control *controller;
-#ifdef __UBOOT__
struct nand_ecclayout *ecclayout;
-#endif
struct nand_ecc_ctrl ecc;
struct nand_buffers *buffers;
@@ -767,6 +755,7 @@
#define NAND_MFR_EON 0x92
#define NAND_MFR_SANDISK 0x45
#define NAND_MFR_INTEL 0x89
+#define NAND_MFR_ATO 0x9b
/* The maximum expected count of bytes in the NAND ID sequence */
#define NAND_MAX_ID_LEN 8
@@ -816,12 +805,17 @@
* @options: stores various chip bit options
* @id_len: The valid length of the @id.
* @oobsize: OOB size
+ * @ecc: ECC correctability and step information from the datasheet.
* @ecc.strength_ds: The ECC correctability from the datasheet, same as the
* @ecc_strength_ds in nand_chip{}.
* @ecc.step_ds: The ECC step required by the @ecc.strength_ds, same as the
* @ecc_step_ds in nand_chip{}, also from the datasheet.
* For example, the "4bit ECC for each 512Byte" can be set with
* NAND_ECC_INFO(4, 512).
+ * @onfi_timing_mode_default: the default ONFI timing mode entered after a NAND
+ * reset. Should be deduced from timings described
+ * in the datasheet.
+ *
*/
struct nand_flash_dev {
char *name;
@@ -842,6 +836,7 @@
uint16_t strength_ds;
uint16_t step_ds;
} ecc;
+ int onfi_timing_mode_default;
};
/**
@@ -860,19 +855,18 @@
extern int nand_scan_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd);
extern int nand_default_bbt(struct mtd_info *mtd);
extern int nand_markbad_bbt(struct mtd_info *mtd, loff_t offs);
+extern int nand_isreserved_bbt(struct mtd_info *mtd, loff_t offs);
extern int nand_isbad_bbt(struct mtd_info *mtd, loff_t offs, int allowbbt);
extern int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr,
int allowbbt);
extern int nand_do_read(struct mtd_info *mtd, loff_t from, size_t len,
size_t *retlen, uint8_t *buf);
-#ifdef __UBOOT__
/*
* Constants for oob configuration
*/
#define NAND_SMALL_BADBLOCK_POS 5
#define NAND_LARGE_BADBLOCK_POS 0
-#endif
/**
* struct platform_nand_chip - chip level device structure
@@ -1008,12 +1002,62 @@
: 0;
}
-#ifdef __UBOOT__
/* Standard NAND functions from nand_base.c */
void nand_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len);
void nand_write_buf16(struct mtd_info *mtd, const uint8_t *buf, int len);
void nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len);
void nand_read_buf16(struct mtd_info *mtd, uint8_t *buf, int len);
uint8_t nand_read_byte(struct mtd_info *mtd);
-#endif
+
+/*
+ * struct nand_sdr_timings - SDR NAND chip timings
+ *
+ * This struct defines the timing requirements of a SDR NAND chip.
+ * These informations can be found in every NAND datasheets and the timings
+ * meaning are described in the ONFI specifications:
+ * www.onfi.org/~/media/ONFI/specs/onfi_3_1_spec.pdf (chapter 4.15 Timing
+ * Parameters)
+ *
+ * All these timings are expressed in picoseconds.
+ */
+
+struct nand_sdr_timings {
+ u32 tALH_min;
+ u32 tADL_min;
+ u32 tALS_min;
+ u32 tAR_min;
+ u32 tCEA_max;
+ u32 tCEH_min;
+ u32 tCH_min;
+ u32 tCHZ_max;
+ u32 tCLH_min;
+ u32 tCLR_min;
+ u32 tCLS_min;
+ u32 tCOH_min;
+ u32 tCS_min;
+ u32 tDH_min;
+ u32 tDS_min;
+ u32 tFEAT_max;
+ u32 tIR_min;
+ u32 tITC_max;
+ u32 tRC_min;
+ u32 tREA_max;
+ u32 tREH_min;
+ u32 tRHOH_min;
+ u32 tRHW_min;
+ u32 tRHZ_max;
+ u32 tRLOH_min;
+ u32 tRP_min;
+ u32 tRR_min;
+ u64 tRST_max;
+ u32 tWB_max;
+ u32 tWC_min;
+ u32 tWH_min;
+ u32 tWHR_min;
+ u32 tWP_min;
+ u32 tWW_min;
+};
+
+/* get timing characteristics from ONFI timing mode. */
+const struct nand_sdr_timings *onfi_async_timing_mode_to_sdr_timings(int mode);
#endif /* __LINUX_MTD_NAND_H */