Merge https://source.denx.de/u-boot/custodians/u-boot-marvell
- Some more updates/sync's to A38x DDR3 code (Marek & Pali)
- marvell/ddr/AXP: Some type fixes found in the LTO work (Marek)
- Espressobin: Enable more options (Pali)
- pci-aardvark: Implement workaround for the readback value of
VEND_ID (Paili)
diff --git a/arch/arm/mach-mvebu/include/mach/cpu.h b/arch/arm/mach-mvebu/include/mach/cpu.h
index c3f8ad8..52473ad 100644
--- a/arch/arm/mach-mvebu/include/mach/cpu.h
+++ b/arch/arm/mach-mvebu/include/mach/cpu.h
@@ -164,7 +164,7 @@
int ddr3_init(void);
/* Auto Voltage Scaling */
-#if defined(CONFIG_ARMADA_38X) || defined(CONFIG_ARMADA_39X)
+#if defined(CONFIG_ARMADA_38X)
void mv_avs_init(void);
void mv_rtc_config(void);
#else
diff --git a/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.c b/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.c
index ae2a361..3b41c7d 100644
--- a/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.c
+++ b/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.c
@@ -14,11 +14,6 @@
#include "sys_env_lib.h"
#include "ctrl_pex.h"
-#if defined(CONFIG_ARMADA_38X)
-#elif defined(CONFIG_ARMADA_39X)
-#else
-#error "No device is defined"
-#endif
/*
@@ -79,11 +74,6 @@
{ NA, 0x6, NA, NA, 0x4, NA, NA }, /* USB3_HOST0 */
{ NA, NA, NA, 0x5, NA, 0x4, NA }, /* USB3_HOST1 */
{ NA, NA, NA, 0x6, 0x5, 0x5, NA }, /* USB3_DEVICE */
-#ifdef CONFIG_ARMADA_39X
- { NA, NA, 0x5, NA, 0x8, NA, 0x2 }, /* SGMII3 */
- { NA, NA, NA, 0x8, 0x9, 0x8, 0x4 }, /* XAUI */
- { NA, NA, NA, NA, NA, 0x8, 0x4 }, /* RXAUI */
-#endif
{ 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, NA } /* DEFAULT_SERDES */
};
@@ -798,11 +788,9 @@
*/
u8 hws_ctrl_serdes_rev_get(void)
{
-#ifdef CONFIG_ARMADA_38X
/* for A38x-Z1 */
if (sys_env_device_rev_get() == MV_88F68XX_Z1_ID)
return MV_SERDES_REV_1_2;
-#endif
/* for A39x-Z1, A38x-A0 */
return MV_SERDES_REV_2_1;
@@ -1351,9 +1339,6 @@
case SGMII0:
case SGMII1:
case SGMII2:
-#ifdef CONFIG_ARMADA_39X
- case SGMII3:
-#endif
if (baud_rate == SERDES_SPEED_1_25_GBPS)
seq_id = SGMII_1_25_SPEED_CONFIG_SEQ;
else if (baud_rate == SERDES_SPEED_3_125_GBPS)
@@ -1362,14 +1347,6 @@
case QSGMII:
seq_id = QSGMII_5_SPEED_CONFIG_SEQ;
break;
-#ifdef CONFIG_ARMADA_39X
- case XAUI:
- seq_id = XAUI_3_125_SPEED_CONFIG_SEQ;
- break;
- case RXAUI:
- seq_id = RXAUI_6_25_SPEED_CONFIG_SEQ;
- break;
-#endif
default:
return SERDES_LAST_SEQ;
}
@@ -2054,13 +2031,6 @@
(serdes_num,
PEX_CONFIG_REF_CLOCK_100MHZ_SEQ));
return MV_OK;
-#ifdef CONFIG_ARMADA_39X
- case REF_CLOCK_40MHZ:
- CHECK_STATUS(mv_seq_exec
- (serdes_num,
- PEX_CONFIG_REF_CLOCK_40MHZ_SEQ));
- return MV_OK;
-#endif
default:
printf
("%s: Error: ref_clock %d for SerDes lane #%d, type %d is not supported\n",
@@ -2104,22 +2074,6 @@
return MV_BAD_PARAM;
}
break;
-#ifdef CONFIG_ARMADA_39X
- case SGMII3:
- case XAUI:
- case RXAUI:
- if (ref_clock == REF_CLOCK_25MHZ) {
- data1 = POWER_AND_PLL_CTRL_REG_25MHZ_VAL_1;
- } else if (ref_clock == REF_CLOCK_40MHZ) {
- data1 = POWER_AND_PLL_CTRL_REG_40MHZ_VAL;
- } else {
- printf
- ("hws_ref_clock_set: ref clock is not valid for serdes type %d\n",
- serdes_type);
- return MV_BAD_PARAM;
- }
- break;
-#endif
default:
DEBUG_INIT_S("hws_ref_clock_set: not supported serdes type\n");
return MV_BAD_PARAM;
diff --git a/arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.c b/arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.c
index 3c4c7e0..950680a 100644
--- a/arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.c
+++ b/arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.c
@@ -12,7 +12,6 @@
#include "seq_exec.h"
#include "sys_env_lib.h"
-#ifdef CONFIG_ARMADA_38X
enum unit_id sys_env_soc_unit_nums[MAX_UNITS_ID][MAX_DEV_ID_NUM] = {
/* 6820 6810 6811 6828 */
/* PEX_UNIT_ID */ { 4, 3, 3, 4},
@@ -24,19 +23,6 @@
/* XAUI_UNIT_ID */ { 0, 0, 0, 0},
/* RXAUI_UNIT_ID */ { 0, 0, 0, 0}
};
-#else /* if (CONFIG_ARMADA_39X) */
-enum unit_id sys_env_soc_unit_nums[MAX_UNITS_ID][MAX_DEV_ID_NUM] = {
-/* 6920 6928 */
-/* PEX_UNIT_ID */ { 4, 4},
-/* ETH_GIG_UNIT_ID */ { 3, 4},
-/* USB3H_UNIT_ID */ { 1, 2},
-/* USB3D_UNIT_ID */ { 0, 1},
-/* SATA_UNIT_ID */ { 0, 4},
-/* QSGMII_UNIT_ID */ { 0, 1},
-/* XAUI_UNIT_ID */ { 1, 1},
-/* RXAUI_UNIT_ID */ { 1, 1}
-};
-#endif
u32 g_dev_id = -1;
@@ -202,11 +188,7 @@
return ctrl_id;
default:
/* Device ID Default for A38x: 6820 , for A39x: 6920 */
- #ifdef CONFIG_ARMADA_38X
default_ctrl_id = MV_6820_DEV_ID;
- #else
- default_ctrl_id = MV_6920_DEV_ID;
- #endif
printf("%s: Error retrieving device ID (%x), using default ID = %x\n",
__func__, ctrl_id, default_ctrl_id);
return default_ctrl_id;
@@ -261,9 +243,6 @@
{
u32 i, val;
- if (!(IS_ENABLED(CONFIG_ARMADA_38X) || IS_ENABLED(CONFIG_ARMADA_39X)))
- return;
-
/* Activate pipe0 for read/write transaction, and set XBAR client number #1 */
val = 0x1 << DFX_PIPE_SELECT_PIPE0_ACTIVE_OFFS |
0x1 << DFX_PIPE_SELECT_XBAR_CLIENT_SEL_OFFS;
@@ -278,9 +257,6 @@
{
u32 sar_freq;
- if (!(IS_ENABLED(CONFIG_ARMADA_38X) || IS_ENABLED(CONFIG_ARMADA_39X)))
- return;
-
reg_write(AVS_DEBUG_CNTR_REG, AVS_DEBUG_CNTR_DEFAULT_VALUE);
reg_write(AVS_DEBUG_CNTR_REG, AVS_DEBUG_CNTR_DEFAULT_VALUE);
diff --git a/arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.h b/arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.h
index 17cd811..118bf56 100644
--- a/arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.h
+++ b/arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.h
@@ -118,12 +118,8 @@
/* TWSI addresses */
/* starting from A38x A0, i2c address of EEPROM is 0x57 */
-#ifdef CONFIG_ARMADA_39X
-#define EEPROM_I2C_ADDR 0x50
-#else
#define EEPROM_I2C_ADDR (sys_env_device_rev_get() == \
MV_88F68XX_Z1_ID ? 0x50 : 0x57)
-#endif
#define RD_GET_MODE_ADDR 0x4c
#define DB_GET_MODE_SLM1363_ADDR 0x25
#define DB_GET_MODE_SLM1364_ADDR 0x24
@@ -216,7 +212,6 @@
#define A39X_MV_MARVELL_BOARD_NUM (A39X_MV_MAX_MARVELL_BOARD_ID - \
A39X_MARVELL_BOARD_ID_BASE)
-#ifdef CONFIG_ARMADA_38X
#define CUTOMER_BOARD_ID_BASE A38X_CUSTOMER_BOARD_ID_BASE
#define CUSTOMER_BOARD_ID0 A38X_CUSTOMER_BOARD_ID0
#define CUSTOMER_BOARD_ID1 A38X_CUSTOMER_BOARD_ID1
@@ -227,18 +222,6 @@
#define MV_MARVELL_BOARD_NUM A38X_MV_MARVELL_BOARD_NUM
#define MV_DEFAULT_BOARD_ID DB_68XX_ID
#define MV_DEFAULT_DEVICE_ID MV_6811
-#elif defined(CONFIG_ARMADA_39X)
-#define CUTOMER_BOARD_ID_BASE A39X_CUSTOMER_BOARD_ID_BASE
-#define CUSTOMER_BOARD_ID0 A39X_CUSTOMER_BOARD_ID0
-#define CUSTOMER_BOARD_ID1 A39X_CUSTOMER_BOARD_ID1
-#define MV_MAX_CUSTOMER_BOARD_ID A39X_MV_MAX_CUSTOMER_BOARD_ID
-#define MV_CUSTOMER_BOARD_NUM A39X_MV_CUSTOMER_BOARD_NUM
-#define MARVELL_BOARD_ID_BASE A39X_MARVELL_BOARD_ID_BASE
-#define MV_MAX_MARVELL_BOARD_ID A39X_MV_MAX_MARVELL_BOARD_ID
-#define MV_MARVELL_BOARD_NUM A39X_MV_MARVELL_BOARD_NUM
-#define MV_DEFAULT_BOARD_ID A39X_DB_69XX_ID
-#define MV_DEFAULT_DEVICE_ID MV_6920
-#endif
#define MV_INVALID_BOARD_ID 0xffffffff
@@ -295,11 +278,7 @@
#define MV_6920_INDEX 0
#define MV_6928_INDEX 1
-#ifdef CONFIG_ARMADA_38X
#define MAX_DEV_ID_NUM 4
-#else
-#define MAX_DEV_ID_NUM 2
-#endif
#define MV_6820_INDEX 0
#define MV_6810_INDEX 1
@@ -340,21 +319,13 @@
* If suspend to RAM is not supported set '-1'
*/
#ifdef CONFIG_CUSTOMER_BOARD_SUPPORT
-#ifdef CONFIG_ARMADA_38X
#define MV_BOARD_WAKEUP_GPIO_INFO { \
{A38X_CUSTOMER_BOARD_ID0, -1 }, \
{A38X_CUSTOMER_BOARD_ID0, -1 }, \
};
-#else
-#define MV_BOARD_WAKEUP_GPIO_INFO { \
- {A39X_CUSTOMER_BOARD_ID0, -1 }, \
- {A39X_CUSTOMER_BOARD_ID0, -1 }, \
-};
-#endif /* CONFIG_ARMADA_38X */
#else
-#ifdef CONFIG_ARMADA_38X
#define MV_BOARD_WAKEUP_GPIO_INFO { \
{RD_NAS_68XX_ID, -2 }, \
{DB_68XX_ID, -1 }, \
@@ -364,12 +335,6 @@
{DB_BP_6821_ID, -2 }, \
{DB_AMC_6820_ID, -2 }, \
};
-#else
-#define MV_BOARD_WAKEUP_GPIO_INFO { \
- {A39X_RD_69XX_ID, -1 }, \
- {A39X_DB_69XX_ID, -1 }, \
-};
-#endif /* CONFIG_ARMADA_38X */
#endif /* CONFIG_CUSTOMER_BOARD_SUPPORT */
u32 mv_board_tclk_get(void);
diff --git a/configs/mvebu_espressobin-88f3720_defconfig b/configs/mvebu_espressobin-88f3720_defconfig
index 4956199..c791f98 100644
--- a/configs/mvebu_espressobin-88f3720_defconfig
+++ b/configs/mvebu_espressobin-88f3720_defconfig
@@ -32,12 +32,14 @@
CONFIG_CMD_PCI=y
CONFIG_CMD_SPI=y
CONFIG_CMD_USB=y
-# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_TFTPPUT=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_TIME=y
CONFIG_CMD_MVEBU_BUBT=y
+CONFIG_CMD_BTRFS=y
CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_SQUASHFS=y
+CONFIG_CMD_FS_UUID=y
CONFIG_MAC_PARTITION=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_SPI_FLASH=y
@@ -65,6 +67,7 @@
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
CONFIG_MVNETA=y
+CONFIG_NVME=y
CONFIG_PCI=y
CONFIG_DM_PCI=y
CONFIG_PCI_AARDVARK=y
diff --git a/drivers/ddr/marvell/a38x/ddr3_debug.c b/drivers/ddr/marvell/a38x/ddr3_debug.c
index 22e0cc4..f5fc964 100644
--- a/drivers/ddr/marvell/a38x/ddr3_debug.c
+++ b/drivers/ddr/marvell/a38x/ddr3_debug.c
@@ -6,7 +6,6 @@
#include "ddr3_init.h"
#include "mv_ddr_training_db.h"
#include "mv_ddr_regs.h"
-#include <log.h>
u8 is_reg_dump = 0;
u8 debug_pbs = DEBUG_LEVEL_ERROR;
diff --git a/drivers/ddr/marvell/a38x/ddr3_init.c b/drivers/ddr/marvell/a38x/ddr3_init.c
index 7488770..f878b45 100644
--- a/drivers/ddr/marvell/a38x/ddr3_init.c
+++ b/drivers/ddr/marvell/a38x/ddr3_init.c
@@ -77,9 +77,6 @@
return status;
}
-#if defined(CONFIG_PHY_STATIC_PRINT)
- mv_ddr_phy_static_print();
-#endif
/* Post MC/PHY initializations */
mv_ddr_post_training_soc_config(ddr_type);
diff --git a/drivers/ddr/marvell/a38x/ddr3_training.c b/drivers/ddr/marvell/a38x/ddr3_training.c
index 2b3af23..2512b58 100644
--- a/drivers/ddr/marvell/a38x/ddr3_training.c
+++ b/drivers/ddr/marvell/a38x/ddr3_training.c
@@ -7,8 +7,6 @@
#include "mv_ddr_common.h"
#include "mv_ddr_training_db.h"
#include "mv_ddr_regs.h"
-#include <log.h>
-#include <linux/delay.h>
#define GET_CS_FROM_MASK(mask) (cs_mask2_num[mask])
#define CS_CBE_VALUE(cs_num) (cs_cbe_reg[cs_num])
@@ -207,7 +205,6 @@
if (tm->interface_params[0].as_bus_params[sphy].
is_ck_swap == 1 && sphy == 0) {
/* TODO: move this code to per platform one */
-#if defined(CONFIG_ARMADA_38X) || defined(CONFIG_ARMADA_39X)
/* clock swap for both cs0 and cs1 */
data = (INVERT_PAD << INV_PAD2_OFFS |
INVERT_PAD << INV_PAD6_OFFS |
@@ -219,9 +216,6 @@
DDR_PHY_CONTROL,
PHY_CTRL_PHY_REG,
data, data);
-#else /* !CONFIG_ARMADA_38X && !CONFIG_ARMADA_39X */
-#pragma message "unknown platform to configure ddr clock swap"
-#endif
}
}
@@ -2014,9 +2008,7 @@
static int ddr3_tip_ddr3_training_main_flow(u32 dev_num)
{
/* TODO: enable this functionality for other platforms */
-#if defined(CONFIG_ARMADA_38X) || defined(CONFIG_ARMADA_39X)
struct init_cntr_param init_cntr_prm;
-#endif
int ret = MV_OK;
int adll_bypass_flag = 0;
u32 if_id;
@@ -2050,7 +2042,6 @@
}
/* TODO: enable this functionality for other platforms */
-#if defined(CONFIG_ARMADA_38X) || defined(CONFIG_ARMADA_39X)
if (is_adll_calib_before_init != 0) {
DEBUG_TRAINING_IP(DEBUG_LEVEL_INFO,
("with adll calib before init\n"));
@@ -2081,7 +2072,6 @@
return MV_FAIL;
}
}
-#endif
ret = adll_calibration(dev_num, ACCESS_TYPE_MULTICAST, 0, freq);
if (ret != MV_OK) {
@@ -2905,3 +2895,4 @@
return odt_n;
}
+
diff --git a/drivers/ddr/marvell/a38x/ddr3_training_ip_engine.c b/drivers/ddr/marvell/a38x/ddr3_training_ip_engine.c
index 5fd9a05..102f9bd 100644
--- a/drivers/ddr/marvell/a38x/ddr3_training_ip_engine.c
+++ b/drivers/ddr/marvell/a38x/ddr3_training_ip_engine.c
@@ -6,8 +6,6 @@
#include "ddr3_init.h"
#include "mv_ddr_regs.h"
#include "ddr_training_ip_db.h"
-#include <image.h>
-#include <linux/delay.h>
#define PATTERN_1 0x55555555
#define PATTERN_2 0xaaaaaaaa
@@ -614,9 +612,9 @@
MASK_ALL_BITS));
}
- CHECK_STATUS(ddr3_tip_if_write(dev_num, access_type, if_id,
- ODPG_DATA_BUFFER_OFFS_REG,
- load_addr, MASK_ALL_BITS));
+ CHECK_STATUS(ddr3_tip_if_write
+ (dev_num, access_type, if_id,
+ ODPG_DATA_BUFFER_OFFS_REG, load_addr, MASK_ALL_BITS));
return MV_OK;
}
diff --git a/drivers/ddr/marvell/a38x/ddr3_training_leveling.c b/drivers/ddr/marvell/a38x/ddr3_training_leveling.c
index dadb06b..6523281 100644
--- a/drivers/ddr/marvell/a38x/ddr3_training_leveling.c
+++ b/drivers/ddr/marvell/a38x/ddr3_training_leveling.c
@@ -7,7 +7,6 @@
#include "mv_ddr_training_db.h"
#include "ddr_training_ip_db.h"
#include "mv_ddr_regs.h"
-#include <linux/delay.h>
#define WL_ITERATION_NUM 10
@@ -916,10 +915,8 @@
DEBUG_LEVELING(DEBUG_LEVEL_ERROR, ("training done failed\n"));
} else { /* check for training pass */
reg_data = data_read[0];
-#if defined(CONFIG_ARMADA_38X) /* JIRA #1498 for 16 bit with ECC */
if (tm->bus_act_mask == 0xb) /* set to data to 0 to skip the check */
reg_data = 0;
-#endif
if (reg_data != PASS)
DEBUG_LEVELING(DEBUG_LEVEL_INFO, ("training result failed\n"));
diff --git a/drivers/ddr/marvell/a38x/ddr_ml_wrapper.h b/drivers/ddr/marvell/a38x/ddr_ml_wrapper.h
index ac9250f..7357311 100644
--- a/drivers/ddr/marvell/a38x/ddr_ml_wrapper.h
+++ b/drivers/ddr/marvell/a38x/ddr_ml_wrapper.h
@@ -13,9 +13,7 @@
#include <asm/arch/cpu.h>
#include <asm/arch/soc.h>
-#if defined(CONFIG_ARMADA_38X) || defined(CONFIG_ARMADA_39X)
#define INTER_REGS_BASE SOC_REGS_PHY_BASE
-#endif
/*
* MV_DEBUG_INIT need to be defines, otherwise the output of the
diff --git a/drivers/ddr/marvell/a38x/mv_ddr_plat.c b/drivers/ddr/marvell/a38x/mv_ddr_plat.c
index 0d1df18..faafc86 100644
--- a/drivers/ddr/marvell/a38x/mv_ddr_plat.c
+++ b/drivers/ddr/marvell/a38x/mv_ddr_plat.c
@@ -8,7 +8,6 @@
#include "mv_ddr_training_db.h"
#include "mv_ddr_regs.h"
#include "mv_ddr_sys_env_lib.h"
-#include <linux/delay.h>
#define DDR_INTERFACES_NUM 1
#define DDR_INTERFACE_OCTETS_NUM 5
@@ -560,11 +559,7 @@
static int ddr3_tip_a38x_get_device_info(u8 dev_num, struct ddr3_device_info *info_ptr)
{
-#if defined(CONFIG_ARMADA_39X)
- info_ptr->device_id = 0x6900;
-#else
info_ptr->device_id = 0x6800;
-#endif
info_ptr->ck_delay = ck_delay;
return MV_OK;
@@ -667,11 +662,7 @@
ddr3_tip_dev_attr_set(dev_num, MV_ATTR_TIP_REV, MV_TIP_REV_4);
ddr3_tip_dev_attr_set(dev_num, MV_ATTR_PHY_EDGE, MV_DDR_PHY_EDGE_POSITIVE);
ddr3_tip_dev_attr_set(dev_num, MV_ATTR_OCTET_PER_INTERFACE, DDR_INTERFACE_OCTETS_NUM);
-#ifdef CONFIG_ARMADA_39X
- ddr3_tip_dev_attr_set(dev_num, MV_ATTR_INTERLEAVE_WA, 1);
-#else
ddr3_tip_dev_attr_set(dev_num, MV_ATTR_INTERLEAVE_WA, 0);
-#endif
ca_delay = 0;
delay_enable = 1;
diff --git a/drivers/ddr/marvell/a38x/mv_ddr_plat.h b/drivers/ddr/marvell/a38x/mv_ddr_plat.h
index 281d4c2..4499884 100644
--- a/drivers/ddr/marvell/a38x/mv_ddr_plat.h
+++ b/drivers/ddr/marvell/a38x/mv_ddr_plat.h
@@ -6,6 +6,8 @@
#ifndef _MV_DDR_PLAT_H
#define _MV_DDR_PLAT_H
+#include <linux/delay.h>
+
#define MAX_DEVICE_NUM 1
#define MAX_INTERFACE_NUM 1
#define MAX_BUS_NUM 5
diff --git a/drivers/ddr/marvell/a38x/mv_ddr_spd.h b/drivers/ddr/marvell/a38x/mv_ddr_spd.h
index b4bfef3..6043f11 100644
--- a/drivers/ddr/marvell/a38x/mv_ddr_spd.h
+++ b/drivers/ddr/marvell/a38x/mv_ddr_spd.h
@@ -40,7 +40,10 @@
*/
union mv_ddr_spd_data {
unsigned char all_bytes[MV_DDR_SPD_DATA_BLOCK0_SIZE +
- MV_DDR_SPD_DATA_BLOCK1M_SIZE];
+ MV_DDR_SPD_DATA_BLOCK1M_SIZE +
+ MV_DDR_SPD_DATA_BLOCK1H_SIZE +
+ MV_DDR_SPD_DATA_BLOCK2E_SIZE +
+ MV_DDR_SPD_DATA_BLOCK2M_SIZE];
struct {
/* block 0 */
union { /* num of bytes used/num of bytes in spd device/crc coverage */
@@ -271,6 +274,9 @@
} bit_fields;
} byte_131;
unsigned char bytes_132_191[60]; /* reserved; all 0s */
+ unsigned char bytes_192_255[MV_DDR_SPD_DATA_BLOCK1H_SIZE];
+ unsigned char bytes_256_319[MV_DDR_SPD_DATA_BLOCK2E_SIZE];
+ unsigned char bytes_320_383[MV_DDR_SPD_DATA_BLOCK2M_SIZE];
} byte_fields;
};
diff --git a/drivers/ddr/marvell/a38x/mv_ddr_sys_env_lib.h b/drivers/ddr/marvell/a38x/mv_ddr_sys_env_lib.h
index dc6977c..10b0d45 100644
--- a/drivers/ddr/marvell/a38x/mv_ddr_sys_env_lib.h
+++ b/drivers/ddr/marvell/a38x/mv_ddr_sys_env_lib.h
@@ -78,22 +78,7 @@
* set '-2'
* If suspend to RAM is not supported set '-1'
*/
-#ifdef CONFIG_CUSTOMER_BOARD_SUPPORT
-#ifdef CONFIG_ARMADA_38X
-#define MV_BOARD_WAKEUP_GPIO_INFO { \
- {A38X_CUSTOMER_BOARD_ID0, -1 }, \
- {A38X_CUSTOMER_BOARD_ID0, -1 }, \
-};
-#else
-#define MV_BOARD_WAKEUP_GPIO_INFO { \
- {A39X_CUSTOMER_BOARD_ID0, -1 }, \
- {A39X_CUSTOMER_BOARD_ID0, -1 }, \
-};
-#endif /* CONFIG_ARMADA_38X */
-#else
-
-#ifdef CONFIG_ARMADA_38X
#define MV_BOARD_WAKEUP_GPIO_INFO { \
{RD_NAS_68XX_ID, -2 }, \
{DB_68XX_ID, -1 }, \
@@ -103,13 +88,6 @@
{DB_BP_6821_ID, -2 }, \
{DB_AMC_6820_ID, -2 }, \
};
-#else
-#define MV_BOARD_WAKEUP_GPIO_INFO { \
- {A39X_RD_69XX_ID, -1 }, \
- {A39X_DB_69XX_ID, -1 }, \
-};
-#endif /* CONFIG_ARMADA_38X */
-#endif /* CONFIG_CUSTOMER_BOARD_SUPPORT */
enum suspend_wakeup_status mv_ddr_sys_env_suspend_wakeup_check(void);
u32 mv_ddr_sys_env_get_cs_ena_from_reg(void);
diff --git a/drivers/ddr/marvell/a38x/xor.c b/drivers/ddr/marvell/a38x/xor.c
index 98fb39e..7bc6268 100644
--- a/drivers/ddr/marvell/a38x/xor.c
+++ b/drivers/ddr/marvell/a38x/xor.c
@@ -347,10 +347,8 @@
for (cs_c = 0; cs_c < max_cs; cs_c++)
cs_ena |= 1 << cs_c;
-#if defined(CONFIG_ARMADA_38X) || defined(CONFIG_ARMADA_39X)
/* all chip-selects are of same size */
ddr3_calc_mem_cs_size(0, &cs_mem_size_mb);
-#endif
cs_mem_size = cs_mem_size_mb * _1M;
mv_sys_xor_init(max_cs, cs_ena, cs_mem_size, 0);
total_mem_size = max_cs * cs_mem_size;
diff --git a/drivers/ddr/marvell/axp/ddr3_dfs.c b/drivers/ddr/marvell/axp/ddr3_dfs.c
index b58c0fe..2a45966 100644
--- a/drivers/ddr/marvell/axp/ddr3_dfs.c
+++ b/drivers/ddr/marvell/axp/ddr3_dfs.c
@@ -42,8 +42,8 @@
extern void get_target_freq(u32 freq_mode, u32 *ddr_freq, u32 *hclk_ps);
#else
extern u16 odt_dynamic[ODT_OPT][MAX_CS];
-extern u8 div_ratio1to1[CLK_CPU][CLK_DDR];
-extern u8 div_ratio2to1[CLK_CPU][CLK_DDR];
+extern u8 div_ratio1to1[CLK_VCO][CLK_DDR];
+extern u8 div_ratio2to1[CLK_VCO][CLK_DDR];
#endif
extern u16 odt_static[ODT_OPT][MAX_CS];
diff --git a/drivers/ddr/marvell/axp/ddr3_sdram.c b/drivers/ddr/marvell/axp/ddr3_sdram.c
index 3a266c6..0b150b2 100644
--- a/drivers/ddr/marvell/axp/ddr3_sdram.c
+++ b/drivers/ddr/marvell/axp/ddr3_sdram.c
@@ -21,7 +21,7 @@
#if defined(MV88F78X60)
extern u32 pbs_pattern_64b[2][LEN_PBS_PATTERN];
#endif
-extern u32 pbs_dq_mapping[PUP_NUM_64BIT][DQ_NUM];
+extern u32 pbs_dq_mapping[PUP_NUM_64BIT + 1][DQ_NUM];
#if defined(MV88F78X60) || defined(MV88F672X)
/* PBS locked dq (per pup) */
diff --git a/drivers/ddr/marvell/axp/xor.c b/drivers/ddr/marvell/axp/xor.c
index 17bfe6a..76aea96 100644
--- a/drivers/ddr/marvell/axp/xor.c
+++ b/drivers/ddr/marvell/axp/xor.c
@@ -152,8 +152,8 @@
return MV_OK;
}
-int mv_xor_mem_init(u32 chan, u32 start_ptr, u32 block_size, u32 init_val_high,
- u32 init_val_low)
+int mv_xor_mem_init(u32 chan, u32 start_ptr, unsigned long long block_size,
+ u32 init_val_high, u32 init_val_low)
{
u32 tmp;
diff --git a/drivers/ddr/marvell/axp/xor.h b/drivers/ddr/marvell/axp/xor.h
index 97d1056..a7c6ae8 100644
--- a/drivers/ddr/marvell/axp/xor.h
+++ b/drivers/ddr/marvell/axp/xor.h
@@ -64,7 +64,7 @@
void mv_sys_xor_init(MV_DRAM_INFO *dram_info);
void mv_sys_xor_finish(void);
int mv_xor_transfer(u32 chan, int xor_type, u32 xor_chain_ptr);
-int mv_xor_mem_init(u32 chan, u32 start_ptr, u32 block_size, u32 init_val_high,
- u32 init_val_low);
+int mv_xor_mem_init(u32 chan, u32 start_ptr, unsigned long long block_size,
+ u32 init_val_high, u32 init_val_low);
#endif /* __XOR_H */
diff --git a/drivers/pci/pci-aardvark.c b/drivers/pci/pci-aardvark.c
index b4e1b60..3b9309f 100644
--- a/drivers/pci/pci-aardvark.c
+++ b/drivers/pci/pci-aardvark.c
@@ -105,6 +105,7 @@
#define LTSSM_SHIFT 24
#define LTSSM_MASK 0x3f
#define LTSSM_L0 0x10
+#define VENDOR_ID_REG (LMI_BASE_ADDR + 0x44)
/* PCIe core controller registers */
#define CTRL_CORE_BASE_ADDR 0x18000
@@ -529,6 +530,15 @@
reg |= (IS_RC_MSK << IS_RC_SHIFT);
advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG);
+ /*
+ * Replace incorrect PCI vendor id value 0x1b4b by correct value 0x11ab.
+ * VENDOR_ID_REG contains vendor id in low 16 bits and subsystem vendor
+ * id in high 16 bits. Updating this register changes readback value of
+ * read-only vendor id bits in PCIE_CORE_DEV_ID_REG register. Workaround
+ * for erratum 4.1: "The value of device and vendor ID is incorrect".
+ */
+ advk_writel(pcie, 0x11ab11ab, VENDOR_ID_REG);
+
/* Set Advanced Error Capabilities and Control PF0 register */
reg = PCIE_CORE_ERR_CAPCTL_ECRC_CHK_TX |
PCIE_CORE_ERR_CAPCTL_ECRC_CHK_TX_EN |
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index e793cd1..819e362 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -43,7 +43,6 @@
CONFIG_ARMADA100
CONFIG_ARMADA100_FEC
CONFIG_ARMADA168
-CONFIG_ARMADA_39X
CONFIG_ARMV7_SECURE_BASE
CONFIG_ARMV7_SECURE_MAX_SIZE
CONFIG_ARMV7_SECURE_RESERVE_SIZE
diff --git a/tools/Makefile b/tools/Makefile
index 2d55043..62de7e6 100644
--- a/tools/Makefile
+++ b/tools/Makefile
@@ -150,12 +150,12 @@
HOSTCFLAGS_kwbimage.o += -DCONFIG_SYS_U_BOOT_OFFS=$(CONFIG_SYS_U_BOOT_OFFS)
endif
-ifneq ($(CONFIG_ARMADA_38X)$(CONFIG_ARMADA_39X),)
+ifneq ($(CONFIG_ARMADA_38X),)
HOSTCFLAGS_kwbimage.o += -DCONFIG_KWB_SECURE
endif
# MXSImage needs LibSSL
-ifneq ($(CONFIG_MX23)$(CONFIG_MX28)$(CONFIG_ARMADA_38X)$(CONFIG_ARMADA_39X)$(CONFIG_FIT_SIGNATURE)$(CONFIG_FIT_CIPHER),)
+ifneq ($(CONFIG_MX23)$(CONFIG_MX28)$(CONFIG_ARMADA_38X)$(CONFIG_FIT_SIGNATURE)$(CONFIG_FIT_CIPHER),)
HOSTCFLAGS_kwbimage.o += \
$(shell pkg-config --cflags libssl libcrypto 2> /dev/null || echo "")
HOSTLDLIBS_mkimage += \