arch: powerpc: update the eLBC IP input clock
eLBC IP clock is always a constant divisor of platform clock
pre-defined per SoC. Clock ratio register (LCRR) used in
current implementation governs eLBC IP output cloc.
Update sys_info->freq_localbus to represent eLBC input clock with
value constant divisor of platform clock.
Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
diff --git a/arch/powerpc/cpu/mpc85xx/Kconfig b/arch/powerpc/cpu/mpc85xx/Kconfig
index c06a4db..592b581 100644
--- a/arch/powerpc/cpu/mpc85xx/Kconfig
+++ b/arch/powerpc/cpu/mpc85xx/Kconfig
@@ -1337,6 +1337,24 @@
Defines divider of platform clock(clock input to
IFC controller).
+config SYS_FSL_LBC_CLK_DIV
+ int "Divider of platform clock"
+ depends on FSL_ELBC || ARCH_MPC8540 || \
+ ARCH_MPC8548 || ARCH_MPC8541 || \
+ ARCH_MPC8555 || ARCH_MPC8560 || \
+ ARCH_MPC8568
+
+ default 2 if ARCH_P2041 || \
+ ARCH_P3041 || \
+ ARCH_P4080 || \
+ ARCH_P5020 || \
+ ARCH_P5040
+ default 1
+
+ help
+ Defines divider of platform clock(clock input to
+ eLBC controller).
+
source "board/freescale/b4860qds/Kconfig"
source "board/freescale/bsc9131rdb/Kconfig"
source "board/freescale/bsc9132qds/Kconfig"
diff --git a/arch/powerpc/cpu/mpc85xx/speed.c b/arch/powerpc/cpu/mpc85xx/speed.c
index adba092..cb8281e 100644
--- a/arch/powerpc/cpu/mpc85xx/speed.c
+++ b/arch/powerpc/cpu/mpc85xx/speed.c
@@ -607,32 +607,8 @@
#endif /* CONFIG_FSL_CORENET */
#if defined(CONFIG_FSL_LBC)
- uint lcrr_div;
-#if defined(CONFIG_SYS_LBC_LCRR)
- /* We will program LCRR to this value later */
- lcrr_div = CONFIG_SYS_LBC_LCRR & LCRR_CLKDIV;
-#else
- lcrr_div = in_be32(&(LBC_BASE_ADDR)->lcrr) & LCRR_CLKDIV;
-#endif
- if (lcrr_div == 2 || lcrr_div == 4 || lcrr_div == 8) {
-#if defined(CONFIG_FSL_CORENET)
- /* If this is corenet based SoC, bit-representation
- * for four times the clock divider values.
- */
- lcrr_div *= 4;
-#elif !defined(CONFIG_ARCH_MPC8540) && !defined(CONFIG_ARCH_MPC8541) && \
- !defined(CONFIG_ARCH_MPC8555) && !defined(CONFIG_ARCH_MPC8560)
- /*
- * Yes, the entire PQ38 family use the same
- * bit-representation for twice the clock divider values.
- */
- lcrr_div *= 2;
-#endif
- sys_info->freq_localbus = sys_info->freq_systembus / lcrr_div;
- } else {
- /* In case anyone cares what the unknown value is */
- sys_info->freq_localbus = lcrr_div;
- }
+ sys_info->freq_localbus = sys_info->freq_systembus /
+ CONFIG_SYS_FSL_LBC_CLK_DIV;
#endif
#if defined(CONFIG_FSL_IFC)
diff --git a/arch/powerpc/cpu/mpc86xx/speed.c b/arch/powerpc/cpu/mpc86xx/speed.c
index 05f23db..51b47b8 100644
--- a/arch/powerpc/cpu/mpc86xx/speed.c
+++ b/arch/powerpc/cpu/mpc86xx/speed.c
@@ -24,7 +24,6 @@
volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
volatile ccsr_gur_t *gur = &immap->im_gur;
uint plat_ratio, e600_ratio;
- uint lcrr_div;
plat_ratio = (gur->porpllsr) & 0x0000003e;
plat_ratio >>= 1;
@@ -78,19 +77,7 @@
break;
}
-#if defined(CONFIG_SYS_LBC_LCRR)
- /* We will program LCRR to this value later */
- lcrr_div = CONFIG_SYS_LBC_LCRR & LCRR_CLKDIV;
-#else
- lcrr_div = in_be32(&immap->im_lbc.lcrr) & LCRR_CLKDIV;
-#endif
- if (lcrr_div == 2 || lcrr_div == 4 || lcrr_div == 8) {
- sys_info->freq_localbus = sys_info->freq_systembus
- / (lcrr_div * 2);
- } else {
- /* In case anyone cares what the unknown value is */
- sys_info->freq_localbus = lcrr_div;
- }
+ sys_info->freq_localbus = sys_info->freq_systembus;
}