blob: dc45d16bfe1a6af3e54411c6b7b0c2d691287528 [file] [log] [blame]
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* (C) Copyright 2016 Keymile AG
* Rainer Boschung <rainer.boschung@keymile.com>
*
*/
#ifndef __KMCENT2_H
#define __KMCENT2_H
#define CONFIG_HOSTNAME "kmcent2"
#define KM_BOARD_NAME CONFIG_HOSTNAME
/*
* The Linux fsl_fman driver needs to be able to process frames with more
* than just the VLAN tag (i.e. eDSA tag). It is passed as a kernel boot
* parameters
*/
#define CONFIG_KM_DEF_BOOT_ARGS_CPU "fsl_dpaa_fman.fsl_fm_max_frm=1558"
#include "km/keymile-common.h"
/* Application IFC chip selects */
#define SYS_LAWAPP_BASE 0xc0000000
#define SYS_LAWAPP_BASE_PHYS (0xf00000000ull | SYS_LAWAPP_BASE)
/* Application IFC CS4 MRAM */
#define CONFIG_SYS_MRAM_BASE SYS_LAWAPP_BASE
#define SYS_MRAM_BASE_PHYS SYS_LAWAPP_BASE_PHYS
#define SYS_MRAM_CSPR_EXT (0x0f)
#define SYS_MRAM_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_MRAM_BASE) | \
CSPR_PORT_SIZE_8 | /* 8 bit */ \
CSPR_MSEL_GPCM | /* msel = gpcm */ \
CSPR_V /* bank is valid */)
#define SYS_MRAM_AMASK IFC_AMASK(2 * 1024 * 1024) /* 2 MiB */
#define SYS_MRAM_CSOR CSOR_GPCM_TRHZ_40
/* MRAM Timing parameters for IFC CS4 */
#define SYS_MRAM_FTIM0 (FTIM0_GPCM_TACSE(0x6) | \
FTIM0_GPCM_TEADC(0x8) | \
FTIM0_GPCM_TEAHC(0x2))
#define SYS_MRAM_FTIM1 (FTIM1_GPCM_TACO(0x2) | \
FTIM1_GPCM_TRAD(0xe))
#define SYS_MRAM_FTIM2 (FTIM2_GPCM_TCS(0x2) | \
FTIM2_GPCM_TCH(0x2) | \
FTIM2_GPCM_TWP(0x8))
#define SYS_MRAM_FTIM3 0x04000000
#define CONFIG_SYS_CSPR4_EXT SYS_MRAM_CSPR_EXT
#define CONFIG_SYS_CSPR4 SYS_MRAM_CSPR
#define CONFIG_SYS_AMASK4 SYS_MRAM_AMASK
#define CONFIG_SYS_CSOR4 SYS_MRAM_CSOR
#define CONFIG_SYS_CS4_FTIM0 SYS_MRAM_FTIM0
#define CONFIG_SYS_CS4_FTIM1 SYS_MRAM_FTIM1
#define CONFIG_SYS_CS4_FTIM2 SYS_MRAM_FTIM2
#define CONFIG_SYS_CS4_FTIM3 SYS_MRAM_FTIM3
/* Application IFC CS6: BFTIC */
#define SYS_BFTIC_BASE 0xd0000000
#define SYS_BFTIC_BASE_PHYS (0xf00000000ull | SYS_BFTIC_BASE)
#define SYS_BFTIC_CSPR_EXT (0x0f)
#define SYS_BFTIC_CSPR (CSPR_PHYS_ADDR(SYS_BFTIC_BASE) | \
CSPR_PORT_SIZE_8 | /* Port size = 8 bit */\
CSPR_MSEL_GPCM | /* MSEL = GPCM */\
CSPR_V) /* valid */
#define SYS_BFTIC_AMASK IFC_AMASK(64 * 1024) /* 64kB */
#define SYS_BFTIC_CSOR CSOR_GPCM_TRHZ_40
/* BFTIC Timing parameters for IFC CS6 */
#define SYS_BFTIC_FTIM0 (FTIM0_GPCM_TACSE(0x6) | \
FTIM0_GPCM_TEADC(0x8) | \
FTIM0_GPCM_TEAHC(0x2))
#define SYS_BFTIC_FTIM1 (FTIM1_GPCM_TACO(0x2) | \
FTIM1_GPCM_TRAD(0x12))
#define SYS_BFTIC_FTIM2 (FTIM2_GPCM_TCS(0x3) | \
FTIM2_GPCM_TCH(0x1) | \
FTIM2_GPCM_TWP(0x12))
#define SYS_BFTIC_FTIM3 0x04000000
#define CONFIG_SYS_CSPR6_EXT SYS_BFTIC_CSPR_EXT
#define CONFIG_SYS_CSPR6 SYS_BFTIC_CSPR
#define CONFIG_SYS_AMASK6 SYS_BFTIC_AMASK
#define CONFIG_SYS_CSOR6 SYS_BFTIC_CSOR
#define CONFIG_SYS_CS6_FTIM0 SYS_BFTIC_FTIM0
#define CONFIG_SYS_CS6_FTIM1 SYS_BFTIC_FTIM1
#define CONFIG_SYS_CS6_FTIM2 SYS_BFTIC_FTIM2
#define CONFIG_SYS_CS6_FTIM3 SYS_BFTIC_FTIM3
/* Application IFC CS7 PAXE */
#define CONFIG_SYS_PAXE_BASE 0xd8000000
#define SYS_PAXE_BASE_PHYS (0xf00000000ull | CONFIG_SYS_PAXE_BASE)
#define SYS_PAXE_CSPR_EXT (0x0f)
#define SYS_PAXE_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_PAXE_BASE) | \
CSPR_PORT_SIZE_8 | /* Port size = 8 bit */\
CSPR_MSEL_GPCM | /* MSEL = GPCM */\
CSPR_V) /* valid */
#define SYS_PAXE_AMASK IFC_AMASK(64 * 1024) /* 64kB */
#define SYS_PAXE_CSOR CSOR_GPCM_TRHZ_40
/* PAXE Timing parameters for IFC CS7 */
#define SYS_PAXE_FTIM0 (FTIM0_GPCM_TACSE(0x6) | \
FTIM0_GPCM_TEADC(0x8) | \
FTIM0_GPCM_TEAHC(0x2))
#define SYS_PAXE_FTIM1 (FTIM1_GPCM_TACO(0x2) | \
FTIM1_GPCM_TRAD(0x12))
#define SYS_PAXE_FTIM2 (FTIM2_GPCM_TCS(0x3) | \
FTIM2_GPCM_TCH(0x1) | \
FTIM2_GPCM_TWP(0x12))
#define SYS_PAXE_FTIM3 0x04000000
#define CONFIG_SYS_CSPR7_EXT SYS_PAXE_CSPR_EXT
#define CONFIG_SYS_CSPR7 SYS_PAXE_CSPR
#define CONFIG_SYS_AMASK7 SYS_PAXE_AMASK
#define CONFIG_SYS_CSOR7 SYS_PAXE_CSOR
#define CONFIG_SYS_CS7_FTIM0 SYS_PAXE_FTIM0
#define CONFIG_SYS_CS7_FTIM1 SYS_PAXE_FTIM1
#define CONFIG_SYS_CS7_FTIM2 SYS_PAXE_FTIM2
#define CONFIG_SYS_CS7_FTIM3 SYS_PAXE_FTIM3
/* PRST */
#define KM_BFTIC4_RST 0
#define KM_DPAXE_RST 1
#define KM_FEMT_RST 3
#define KM_FOAM_RST 4
#define KM_EFE_RST 5
#define KM_ES_PHY_RST 6
#define KM_XES_PHY_RST 7
#define KM_ZL30158_RST 8
#define KM_ZL30364_RST 9
#define KM_BOBCAT_RST 10
#define KM_ETHSW_DDR_RST 12
#define KM_CFE_RST 13
#define KM_PEXSW_RST 14
#define KM_PEXSW_NT_RST 15
/* QRIO GPIOs used for deblocking */
#define KM_I2C_DEBLOCK_PORT QRIO_GPIO_A
#define KM_I2C_DEBLOCK_SCL 20
#define KM_I2C_DEBLOCK_SDA 21
/* High Level Configuration Options */
#define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */
#define CONFIG_FSL_CORENET /* Freescale CoreNet platform */
#define CONFIG_RESET_VECTOR_ADDRESS 0xebfffffc
#define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */
#define CONFIG_SYS_NUM_CPC CONFIG_SYS_NUM_DDR_CTLRS
#define CONFIG_PCIE1 /* PCIE controller 1 */
/* Environment in parallel NOR-Flash */
#define CONFIG_ENV_TOTAL_SIZE 0x040000
#define ENV_DEL_ADDR 0xebf00000 /*direct for newenv*/
/*
* These can be toggled for performance analysis, otherwise use default.
*/
#define CONFIG_SYS_CACHE_STASHING
#define CONFIG_SYS_INIT_L2CSR0 L2CSR0_L2E
#define CONFIG_ENABLE_36BIT_PHYS
/* POST memory regions test */
#define CONFIG_POST CONFIG_SYS_POST_MEM_REGIONS
/*
* Config the L3 Cache as L3 SRAM
*/
#define CONFIG_SYS_INIT_L3_ADDR 0xFFFC0000
#define CONFIG_SYS_L3_SIZE 256 << 10
#define CONFIG_SYS_DCSRBAR 0xf0000000
#define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull
/*
* DDR Setup
*/
#define CONFIG_VERY_BIG_RAM
#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000
#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
#define CONFIG_SYS_SPD_BUS_NUM 0
#define SPD_EEPROM_ADDRESS 0x54
#define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */
/******************************************************************************
* (PRAM usage)
* ... -------------------------------------------------------
* ... |ROOTFSSIZE | PNVRAM |PHRAM |RESERVED_PRAM | END_OF_RAM
* ... |<------------------- pram -------------------------->|
* ... -------------------------------------------------------
* @END_OF_RAM:
* @CONFIG_KM_RESERVED_PRAM: reserved pram for special purpose
* @CONFIG_KM_PHRAM: address for /var
* @CONFIG_KM_PNVRAM: address for PNVRAM (for the application)
* @CONFIG_KM_ROOTFSSIZE: address for rootfilesystem in RAM
*/
/* size of rootfs in RAM */
#define CONFIG_KM_ROOTFSSIZE 0x0
/* set the default PRAM value to at least PNVRAM + PHRAM when pram env variable
* is not valid yet, which is the case for when u-boot copies itself to RAM
*/
#define CONFIG_PRAM ((CONFIG_KM_PNVRAM + CONFIG_KM_PHRAM) >> 10)
/*
* IFC Definitions
*/
/* NOR flash on IFC CS0 */
#define CONFIG_SYS_FLASH_BASE 0xe8000000
#define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | \
CONFIG_SYS_FLASH_BASE)
#define CONFIG_SYS_NOR_CSPR_EXT (0x0f)
#define CONFIG_SYS_NOR_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE) | \
CSPR_PORT_SIZE_16 | /* Port size = 16 bit */\
0x00000010 | /* drive TE high */\
CSPR_MSEL_NOR | /* MSEL = NOR */\
CSPR_V) /* valid */
#define CONFIG_SYS_NOR_AMASK IFC_AMASK(64 * 1024 * 1024) /* 64MB */
#define CONFIG_SYS_NOR_CSOR (CSOR_NOR_AVD_TGL_PGM_EN | /* AVD toggle */\
CSOR_NOR_TRHZ_20 | \
CSOR_NOR_BCTLD)
/* NOR Flash Timing Params */
#define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x1) | \
FTIM0_NOR_TEADC(0x7) | \
FTIM0_NOR_TEAHC(0x1))
#define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x1) | \
FTIM1_NOR_TRAD_NOR(0x21) | \
FTIM1_NOR_TSEQRAD_NOR(0x21))
#define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCH(0x1) | \
FTIM2_NOR_TCS(0x1) | \
FTIM2_NOR_TWP(0xb) | \
FTIM2_NOR_TWPH(0x6))
#define CONFIG_SYS_NOR_FTIM3 0x0
#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR_CSPR_EXT
#define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR_CSPR
#define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK
#define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR
#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0
#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1
#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2
#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3
/* More NOR Flash params */
#define CONFIG_SYS_FLASH_QUIET_TEST
#define CONFIG_SYS_MAX_FLASH_SECT 512 /* sectors per device */
#define CONFIG_SYS_FLASH_EMPTY_INFO
#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS}
/* NAND Flash on IFC CS1*/
#define CONFIG_SYS_NAND_BASE 0xfa000000
#define CONFIG_SYS_NAND_BASE_PHYS (0xf00000000ull | CONFIG_SYS_NAND_BASE)
#define CONFIG_SYS_NAND_CSPR_EXT (0x0f)
#define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE) | \
CSPR_PORT_SIZE_8 | /* Port Size = 8 bit */\
0x00000010 | /* drive TE high */\
CSPR_MSEL_NAND | /* MSEL = NAND */\
CSPR_V) /* valid */
#define CONFIG_SYS_NAND_AMASK IFC_AMASK(64 * 1024) /* 64kB */
#define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN | /* ECC encoder on */ \
CSOR_NAND_ECC_DEC_EN | /* ECC decoder on */ \
CSOR_NAND_ECC_MODE_4 | /* 4-bit ECC */ \
CSOR_NAND_RAL_3 | /* RAL = 3Bytes */ \
CSOR_NAND_PGS_2K | /* Page size = 2K */ \
CSOR_NAND_SPRZ_128 | /* Spare size = 128 */ \
CSOR_NAND_PB(64) | /* 64 Pages/Block */ \
CSOR_NAND_TRHZ_40 | /**/ \
CSOR_NAND_BCTLD) /**/
/* ONFI NAND Flash mode0 Timing Params */
#define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x3) | \
FTIM0_NAND_TWP(0x8) | \
FTIM0_NAND_TWCHT(0x3) | \
FTIM0_NAND_TWH(0x5))
#define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x1e) | \
FTIM1_NAND_TWBE(0x1e) | \
FTIM1_NAND_TRR(0x6) | \
FTIM1_NAND_TRP(0x8))
#define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x9) | \
FTIM2_NAND_TREH(0x5) | \
FTIM2_NAND_TWHRE(0x3c))
#define CONFIG_SYS_NAND_FTIM3 (FTIM3_NAND_TWW(0x1e))
#define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NAND_CSPR_EXT
#define CONFIG_SYS_CSPR1 CONFIG_SYS_NAND_CSPR
#define CONFIG_SYS_AMASK1 CONFIG_SYS_NAND_AMASK
#define CONFIG_SYS_CSOR1 CONFIG_SYS_NAND_CSOR
#define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NAND_FTIM0
#define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NAND_FTIM1
#define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NAND_FTIM2
#define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NAND_FTIM3
/* More NAND Flash Params */
#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE }
#define CONFIG_SYS_MAX_NAND_DEVICE 1
/* QRIO on IFC CS2 */
#define CONFIG_SYS_QRIO_BASE 0xfb000000
#define CONFIG_SYS_QRIO_BASE_PHYS (0xf00000000ull | CONFIG_SYS_QRIO_BASE)
#define SYS_QRIO_CSPR_EXT (0x0f)
#define SYS_QRIO_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_QRIO_BASE) | \
CSPR_PORT_SIZE_8 | /* Port size = 8 bit */\
0x00000010 | /* drive TE high */\
CSPR_MSEL_GPCM | /* MSEL = GPCM */\
CSPR_V) /* valid */
#define SYS_QRIO_AMASK IFC_AMASK(64 * 1024) /* 64kB */
#define SYS_QRIO_CSOR (CSOR_GPCM_TRHZ_20 |\
CSOR_GPCM_BCTLD)
/* QRIO Timing parameters for IFC CS2 */
#define SYS_QRIO_FTIM0 (FTIM0_GPCM_TACSE(0x2) | \
FTIM0_GPCM_TEADC(0x8) | \
FTIM0_GPCM_TEAHC(0x2))
#define SYS_QRIO_FTIM1 (FTIM1_GPCM_TACO(0x2) | \
FTIM1_GPCM_TRAD(0x6))
#define SYS_QRIO_FTIM2 (FTIM2_GPCM_TCS(0x1) | \
FTIM2_GPCM_TCH(0x1) | \
FTIM2_GPCM_TWP(0x7))
#define SYS_QRIO_FTIM3 0x04000000
#define CONFIG_SYS_CSPR2_EXT SYS_QRIO_CSPR_EXT
#define CONFIG_SYS_CSPR2 SYS_QRIO_CSPR
#define CONFIG_SYS_AMASK2 SYS_QRIO_AMASK
#define CONFIG_SYS_CSOR2 SYS_QRIO_CSOR
#define CONFIG_SYS_CS2_FTIM0 SYS_QRIO_FTIM0
#define CONFIG_SYS_CS2_FTIM1 SYS_QRIO_FTIM1
#define CONFIG_SYS_CS2_FTIM2 SYS_QRIO_FTIM2
#define CONFIG_SYS_CS2_FTIM3 SYS_QRIO_FTIM3
#define CONFIG_HWCONFIG
/* define to use L1 as initial stack */
#define CONFIG_SYS_INIT_RAM_LOCK
#define CONFIG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */
#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf
#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW 0xfe03c000
/* The assembler doesn't like typecast */
#define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
#define CONFIG_SYS_INIT_RAM_SIZE 0x00004000
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
#define CONFIG_SYS_MONITOR_LEN 0xc0000 /* 768k */
/*
* Serial Port - controlled on board with jumper J8
* open - index 2
* shorted - index 1
* Retain non-DM serial port for debug purposes.
*/
#if !defined(CONFIG_DM_SERIAL)
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE 1
#define CONFIG_SYS_NS16550_CLK (get_bus_freq(0) / 2)
#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR + 0x11C500)
#endif
#ifndef __ASSEMBLY__
void set_sda(int state);
void set_scl(int state);
int get_sda(void);
int get_scl(void);
#endif
/*
* General PCI
* Memory space is mapped 1-1, but I/O space must start from 0.
*/
/* controller 1 */
#define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000
#define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull
#define CONFIG_SYS_PCIE1_IO_VIRT 0xf8000000
#define CONFIG_SYS_PCIE1_IO_PHYS 0xff8000000ull
#define CONFIG_SYS_BMAN_NUM_PORTALS 10
#define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000
#define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull
#define CONFIG_SYS_BMAN_MEM_SIZE 0x02000000
#define CONFIG_SYS_BMAN_SP_CINH_SIZE 0x1000
#define CONFIG_SYS_BMAN_CENA_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
#define CONFIG_SYS_BMAN_CINH_BASE (CONFIG_SYS_BMAN_MEM_BASE + \
CONFIG_SYS_BMAN_CENA_SIZE)
#define CONFIG_SYS_BMAN_CINH_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
#define CONFIG_SYS_BMAN_SWP_ISDR_REG 0xE08
#define CONFIG_SYS_QMAN_NUM_PORTALS 10
#define CONFIG_SYS_QMAN_MEM_BASE 0xf6000000
#define CONFIG_SYS_QMAN_MEM_PHYS 0xff6000000ull
#define CONFIG_SYS_QMAN_MEM_SIZE 0x02000000
#define CONFIG_SYS_QMAN_SP_CINH_SIZE 0x1000
#define CONFIG_SYS_QMAN_CENA_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
#define CONFIG_SYS_QMAN_CINH_BASE (CONFIG_SYS_QMAN_MEM_BASE + \
CONFIG_SYS_QMAN_CENA_SIZE)
#define CONFIG_SYS_QMAN_CINH_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
#define CONFIG_SYS_QMAN_SWP_ISDR_REG 0xE08
#define CONFIG_SYS_DPAA_FMAN
#define CONFIG_SYS_DPAA_PME
#define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
/* Qman / Bman */
/* RGMII (FM1@DTESC5) is local managemant interface */
#define CONFIG_SYS_RGMII2_PHY_ADDR 0x11
/*
* Hardware Watchdog
*/
#define CONFIG_WATCHDOG_PRESC 34 /* wdog prescaler 2^(64-34) ~10min */
#define CONFIG_WATCHDOG_RC WRC_CHIP /* reset chip on watchdog event */
/*
* For booting Linux, the board info and command line data
* have to be in the first 64 MB of memory, since this is
* the maximum mapped by the Linux kernel during initialization.
*/
#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial map for Linux*/
#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */
/*
* Environment Configuration
*/
#ifndef CONFIG_KM_DEF_ENV /* if not set by keymile-common.h */
#define CONFIG_KM_DEF_ENV
#endif
#define __USB_PHY_TYPE utmi
#define CONFIG_KM_DEF_ENV_CPU \
"boot=bootm ${load_addr_r} - ${fdt_addr_r}\0" \
"cramfsloadfdt=" \
"cramfsload ${fdt_addr_r} " \
"fdt_0x${IVM_BoardId}_0x${IVM_HWKey}.dtb\0" \
"u-boot=" CONFIG_HOSTNAME "/u-boot.bin\0" \
"update=protect off " __stringify(CONFIG_SYS_MONITOR_BASE) \
" +${filesize} && " \
"erase " __stringify(CONFIG_SYS_MONITOR_BASE) \
" +${filesize} && " \
"cp.b ${load_addr_r} " \
__stringify(CONFIG_SYS_MONITOR_BASE) " ${filesize} && " \
"protect on " __stringify(CONFIG_SYS_MONITOR_BASE) \
" +${filesize}\0" \
"update-nor=protect off " __stringify(CONFIG_SYS_FLASH_BASE) \
" +${filesize} && " \
"erase " __stringify(CONFIG_SYS_FLASH_BASE) \
" +${filesize} && " \
"cp.b ${load_addr_r} " \
__stringify(CONFIG_SYS_FLASH_BASE) " ${filesize} && " \
"protect on " __stringify(CONFIG_SYS_MONITOR_BASE) \
" +" __stringify(CONFIG_SYS_MONITOR_LEN) "\0" \
"set_fdthigh=true\0" \
"checkfdt=true\0" \
"fpgacfg=true\0" \
""
#define CONFIG_HW_ENV_SETTINGS \
"hwconfig=fsl_ddr:ctlr_intlv=cacheline\0" \
"usb_phy_type=" __stringify(__USB_PHY_TYPE) "\0" \
"usb_dr_mode=host\0"
#define CONFIG_KM_NEW_ENV \
"newenv=protect off " __stringify(ENV_DEL_ADDR) \
" +" __stringify(CONFIG_ENV_TOTAL_SIZE) " && " \
"erase " __stringify(ENV_DEL_ADDR) \
" +" __stringify(CONFIG_ENV_TOTAL_SIZE) " && " \
"protect on " __stringify(ENV_DEL_ADDR) \
" +" __stringify(CONFIG_ENV_TOTAL_SIZE) "\0"
/* ppc_82xx is the equivalent to ppc_6xx, the generic ppc toolchain */
#ifndef CONFIG_KM_DEF_ARCH
#define CONFIG_KM_DEF_ARCH "arch=ppc_82xx\0"
#endif
#define CONFIG_EXTRA_ENV_SETTINGS \
CONFIG_KM_DEF_ENV \
CONFIG_KM_DEF_ARCH \
CONFIG_KM_NEW_ENV \
CONFIG_HW_ENV_SETTINGS \
"EEprom_ivm=pca9547:70:9\0" \
""
#endif /* __KMCENT2_H */