mmc: move DesignWare-based drivers to Kconfig
Move (and rename) the following CONFIG options to Kconfig:
CONFIG_EXYNOS_DWMMC (renamed to CONFIG_MMC_DW_EXYNOS)
CONFIG_HIKEY_DWMMC (renamed to CONFIG_MMC_DW_K3)
CONFIG_SOCFPGA_DWMMC (renamed to CONFIG_MMC_DW_SOCFPGA)
The "HIKEY" is a board name, so it is not suitable for the MMC
controller name. I am following the name used in Linux.
This commit was generated as follows:
[1] Rename the config options with the following command:
find . -name .git -prune -o ! -path ./scripts/config_whitelist.txt \
-type f -print | xargs sed -i -e '
s/CONFIG_EXYNOS_DWMMC/CONFIG_MMC_DW_EXYNOS/g
s/CONFIG_HIKEY_DWMMC/CONFIG_MMC_DW_K3/g
s/CONFIG_SOCFPGA_DWMMC/CONFIG_MMC_DW_SOCFPGA/g
'
[2] Commit the changes
[3] Create the entries in drivers/mmc/Kconfig
(with default y for EXYNOS and SOCFPGA)
[4] Run the following:
tools/moveconfig.py -y -r HEAD MMC_DW_EXYNOS MMC_DW_K3 MMC_DW_SOCFPGA
[5] Sort and align drivers/mmc/Makefile for readability
[6] Clean-up doc/README.socfpga by hand
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Marek Vasut <marex@denx.de>
diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig
index 44f58b4..f99264d 100644
--- a/drivers/mmc/Kconfig
+++ b/drivers/mmc/Kconfig
@@ -75,6 +75,24 @@
block, this provides host support for SD and MMC interfaces, in both
PIO, internal DMA mode and external DMA mode.
+config MMC_DW_EXYNOS
+ bool "Exynos specific extensions for Synopsys DW Memory Card Interface"
+ depends on ARCH_EXYNOS
+ depends on MMC_DW
+ default y
+ help
+ This selects support for Samsung Exynos SoC specific extensions to the
+ Synopsys DesignWare Memory Card Interface driver. Select this option
+ for platforms based on Exynos4 and Exynos5 SoC's.
+
+config MMC_DW_K3
+ bool "K3 specific extensions for Synopsys DW Memory Card Interface"
+ depends on MMC_DW
+ help
+ This selects support for Hisilicon K3 SoC specific extensions to the
+ Synopsys DesignWare Memory Card Interface driver. Select this option
+ for platforms based on Hisilicon K3 SoC's.
+
config MMC_DW_ROCKCHIP
bool "Rockchip SD/MMC controller support"
depends on DM_MMC && OF_CONTROL
@@ -85,6 +103,16 @@
SD 3.0, SDIO 3.0 and MMC 4.5 and supports common eMMC chips as well
as removeable SD and micro-SD cards.
+config MMC_DW_SOCFPGA
+ bool "SOCFPGA specific extensions for Synopsys DW Memory Card Interface"
+ depends on ARCH_SOCFPGA
+ depends on MMC_DW
+ default y
+ help
+ This selects support for Altera SOCFPGA specific extensions to the
+ Synopsys DesignWare Memory Card Interface driver. Select this option
+ for platforms based on Altera SOCFPGA.
+
config SH_SDHI
bool "SuperH/Renesas ARM SoCs on-chip SDHI host controller support"
depends on RMOBILE
diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile
index 1c51a7a..4494bdaea 100644
--- a/drivers/mmc/Makefile
+++ b/drivers/mmc/Makefile
@@ -17,9 +17,11 @@
obj-$(CONFIG_ATMEL_SDHCI) += atmel_sdhci.o
obj-$(CONFIG_BFIN_SDH) += bfin_sdh.o
obj-$(CONFIG_DAVINCI_MMC) += davinci_mmc.o
-obj-$(CONFIG_MMC_DW) += dw_mmc.o
-obj-$(CONFIG_EXYNOS_DWMMC) += exynos_dw_mmc.o
-obj-$(CONFIG_HIKEY_DWMMC) += hi6220_dw_mmc.o
+obj-$(CONFIG_MMC_DW) += dw_mmc.o
+obj-$(CONFIG_MMC_DW_EXYNOS) += exynos_dw_mmc.o
+obj-$(CONFIG_MMC_DW_K3) += hi6220_dw_mmc.o
+obj-$(CONFIG_MMC_DW_ROCKCHIP) += rockchip_dw_mmc.o
+obj-$(CONFIG_MMC_DW_SOCFPGA) += socfpga_dw_mmc.o
obj-$(CONFIG_FSL_ESDHC) += fsl_esdhc.o
obj-$(CONFIG_FTSDC010) += ftsdc010_mci.o
obj-$(CONFIG_FTSDC021) += ftsdc021_sdhci.o
@@ -36,7 +38,6 @@
obj-$(CONFIG_OMAP_HSMMC) += omap_hsmmc.o
obj-$(CONFIG_X86) += pci_mmc.o
obj-$(CONFIG_PXA_MMC_GENERIC) += pxa_mmc_gen.o
-obj-$(CONFIG_MMC_DW_ROCKCHIP) += rockchip_dw_mmc.o
obj-$(CONFIG_SUPPORT_EMMC_RPMB) += rpmb.o
obj-$(CONFIG_S3C_SDI) += s3c_sdi.o
ifdef CONFIG_BLK
@@ -46,7 +47,6 @@
endif
obj-$(CONFIG_SH_MMCIF) += sh_mmcif.o
obj-$(CONFIG_SH_SDHI) += sh_sdhi.o
-obj-$(CONFIG_SOCFPGA_DWMMC) += socfpga_dw_mmc.o
obj-$(CONFIG_TEGRA_MMC) += tegra_mmc.o
obj-$(CONFIG_MMC_UNIPHIER) += uniphier-sd.o
obj-$(CONFIG_ZYNQ_SDHCI) += zynq_sdhci.o