mips: Add LinkIt Smart 7688 support
The LinkIt Smart 7688 modules have a MT7688 SoC with 128 MiB of RAM
and 32 MiB of flash (SPI NOR).
This patch also includes 2 targets. One is the target that can be
programmed into the SPI NOR flash and a 2nd target "xxx-ram" is
added to support loading and booting via an already running U-Boot
version. This allows easy development and testing without the
need to flash the image each time.
Signed-off-by: Stefan Roese <sr@denx.de>
[fixed and regenerated defconfig files]
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
diff --git a/board/seeed/linkit-smart-7688/Kconfig b/board/seeed/linkit-smart-7688/Kconfig
new file mode 100644
index 0000000..a9d6328
--- /dev/null
+++ b/board/seeed/linkit-smart-7688/Kconfig
@@ -0,0 +1,12 @@
+if BOARD_LINKIT_SMART_7688
+
+config SYS_BOARD
+ default "linkit-smart-7688"
+
+config SYS_VENDOR
+ default "seeed"
+
+config SYS_CONFIG_NAME
+ default "linkit-smart-7688"
+
+endif
diff --git a/board/seeed/linkit-smart-7688/MAINTAINERS b/board/seeed/linkit-smart-7688/MAINTAINERS
new file mode 100644
index 0000000..c3bbad4
--- /dev/null
+++ b/board/seeed/linkit-smart-7688/MAINTAINERS
@@ -0,0 +1,8 @@
+LINKIT_SMART_7688 BOARD
+M: Stefan Roese <sr@denx.de>
+S: Maintained
+F: board/seeed/linkit-smart-7688
+F: include/configs/linkit-smart-7688.h
+F: configs/linkit-smart-7688_defconfig
+F: configs/linkit-smart-7688_ram_defconfig
+F: arch/mips/dts/linkit-smart-7688.dts
diff --git a/board/seeed/linkit-smart-7688/Makefile b/board/seeed/linkit-smart-7688/Makefile
new file mode 100644
index 0000000..70cd7a8
--- /dev/null
+++ b/board/seeed/linkit-smart-7688/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0+
+
+obj-y += board.o
diff --git a/board/seeed/linkit-smart-7688/board.c b/board/seeed/linkit-smart-7688/board.c
new file mode 100644
index 0000000..a28abc0
--- /dev/null
+++ b/board/seeed/linkit-smart-7688/board.c
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Stefan Roese <sr@denx.de>
+ */
+
+#include <common.h>
+#include <asm/io.h>
+
+#define MT76XX_GPIO1_MODE 0xb0000060
+
+void board_debug_uart_init(void)
+{
+ /* Select UART2 mode instead of GPIO mode (default) */
+ clrbits_le32((void __iomem *)MT76XX_GPIO1_MODE, GENMASK(27, 26));
+}
+
+int board_early_init_f(void)
+{
+ /*
+ * The pin muxing of UART2 also needs to be done, if debug uart
+ * is not enabled. So we need to call this function here as well.
+ */
+ board_debug_uart_init();
+
+ return 0;
+}