i2c: stm32: Update to use standard enums for speed
Update this driver to use the new standard enums for speed.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
Tested-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
diff --git a/drivers/i2c/stm32f7_i2c.c b/drivers/i2c/stm32f7_i2c.c
index 2b18735..21dfa50 100644
--- a/drivers/i2c/stm32f7_i2c.c
+++ b/drivers/i2c/stm32f7_i2c.c
@@ -115,17 +115,6 @@
#define STM32_NSEC_PER_SEC 1000000000L
-#define STANDARD_RATE 100000
-#define FAST_RATE 400000
-#define FAST_PLUS_RATE 1000000
-
-enum stm32_i2c_speed {
- STM32_I2C_SPEED_STANDARD, /* 100 kHz */
- STM32_I2C_SPEED_FAST, /* 400 kHz */
- STM32_I2C_SPEED_FAST_PLUS, /* 1 MHz */
- STM32_I2C_SPEED_END,
-};
-
/**
* struct stm32_i2c_spec - private i2c specification timing
* @rate: I2C bus speed (Hz)
@@ -164,7 +153,7 @@
* @analog_filter: Analog filter delay (On/Off)
*/
struct stm32_i2c_setup {
- enum stm32_i2c_speed speed;
+ enum i2c_speed_mode speed;
u32 speed_freq;
u32 clock_src;
u32 rise_time;
@@ -198,8 +187,8 @@
};
static const struct stm32_i2c_spec i2c_specs[] = {
- [STM32_I2C_SPEED_STANDARD] = {
- .rate = STANDARD_RATE,
+ [IC_SPEED_MODE_STANDARD] = {
+ .rate = I2C_SPEED_STANDARD_RATE,
.rate_min = 8000,
.rate_max = 120000,
.fall_max = 300,
@@ -210,8 +199,8 @@
.l_min = 4700,
.h_min = 4000,
},
- [STM32_I2C_SPEED_FAST] = {
- .rate = FAST_RATE,
+ [IC_SPEED_MODE_FAST] = {
+ .rate = I2C_SPEED_FAST_RATE,
.rate_min = 320000,
.rate_max = 480000,
.fall_max = 300,
@@ -222,8 +211,8 @@
.l_min = 1300,
.h_min = 600,
},
- [STM32_I2C_SPEED_FAST_PLUS] = {
- .rate = FAST_PLUS_RATE,
+ [IC_SPEED_MODE_FAST_PLUS] = {
+ .rate = I2C_SPEED_FAST_PLUS_RATE,
.rate_min = 800000,
.rate_max = 1200000,
.fall_max = 100,
@@ -648,9 +637,9 @@
struct list_head solutions;
int ret;
- if (setup->speed >= STM32_I2C_SPEED_END) {
+ if (setup->speed >= ARRAY_SIZE(i2c_specs)) {
pr_err("%s: speed out of bound {%d/%d}\n", __func__,
- setup->speed, STM32_I2C_SPEED_END - 1);
+ setup->speed, ARRAY_SIZE(i2c_specs) - 1);
return -EINVAL;
}
@@ -719,7 +708,7 @@
if (ret) {
debug("%s: failed to compute I2C timings.\n",
__func__);
- if (i2c_priv->speed > STM32_I2C_SPEED_STANDARD) {
+ if (i2c_priv->speed > IC_SPEED_MODE_STANDARD) {
i2c_priv->speed--;
setup->speed = i2c_priv->speed;
setup->speed_freq =
@@ -784,14 +773,14 @@
struct stm32_i2c_priv *i2c_priv = dev_get_priv(bus);
switch (speed) {
- case STANDARD_RATE:
- i2c_priv->speed = STM32_I2C_SPEED_STANDARD;
+ case I2C_SPEED_STANDARD_RATE:
+ i2c_priv->speed = IC_SPEED_MODE_STANDARD;
break;
- case FAST_RATE:
- i2c_priv->speed = STM32_I2C_SPEED_FAST;
+ case I2C_SPEED_FAST_RATE:
+ i2c_priv->speed = IC_SPEED_MODE_FAST;
break;
- case FAST_PLUS_RATE:
- i2c_priv->speed = STM32_I2C_SPEED_FAST_PLUS;
+ case I2C_SPEED_FAST_PLUS_RATE:
+ i2c_priv->speed = IC_SPEED_MODE_FAST_PLUS;
break;
default:
debug("%s: Speed %d not supported\n", __func__, speed);