spl: Add support for passing handoff info to U-Boot proper
There is some basic informaton that SPL normally wants to pass through to
U-Boot, such as the SDRAM size and bank information.
Mkae use of the new bloblist structure for this. Add a new 'handoff' blob
which is set up in SPL and passed to U-Boot proper. Also adda test for
sandbox_spl that checks that this works correctly and a new 'sb' command
to show the information passed from SPL.
Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
diff --git a/arch/powerpc/include/asm/spl.h b/arch/powerpc/include/asm/spl.h
index cd6d31c..60a7d37 100644
--- a/arch/powerpc/include/asm/spl.h
+++ b/arch/powerpc/include/asm/spl.h
@@ -8,7 +8,4 @@
#define BOOT_DEVICE_NOR 1
-/* Linker symbols */
-extern char __bss_start[], __bss_end[];
-
#endif
diff --git a/arch/sandbox/include/asm/handoff.h b/arch/sandbox/include/asm/handoff.h
new file mode 100644
index 0000000..be4e7b0
--- /dev/null
+++ b/arch/sandbox/include/asm/handoff.h
@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Architecture-specific SPL handoff information for sandbox
+ *
+ * Copyright 2018 Google, Inc
+ * Written by Simon Glass <sjg@chromium.org>
+ */
+
+#ifndef __handoff_h
+#define __handoff_h
+
+#define TEST_HANDOFF_MAGIC 0x14f93c7b
+
+struct arch_spl_handoff {
+ ulong magic; /* Used for testing */
+};
+
+#endif
diff --git a/cmd/sb.c b/cmd/sb.c
index 6ca3361..5701e03 100644
--- a/cmd/sb.c
+++ b/cmd/sb.c
@@ -9,6 +9,23 @@
#include <spl.h>
#include <asm/state.h>
+static int do_sb_handoff(cmd_tbl_t *cmdtp, int flag, int argc,
+ char *const argv[])
+{
+#if CONFIG_IS_ENABLED(HANDOFF)
+ if (gd->spl_handoff)
+ printf("SPL handoff magic %lx\n", gd->spl_handoff->arch.magic);
+ else
+ printf("SPL handoff info not received\n");
+
+ return 0;
+#else
+ printf("Command not supported\n");
+
+ return CMD_RET_USAGE;
+#endif
+}
+
static int do_sb_state(cmd_tbl_t *cmdtp, int flag, int argc,
char * const argv[])
{
@@ -21,6 +38,7 @@
}
static cmd_tbl_t cmd_sb_sub[] = {
+ U_BOOT_CMD_MKENT(handoff, 1, 0, do_sb_handoff, "", ""),
U_BOOT_CMD_MKENT(state, 1, 0, do_sb_state, "", ""),
};
@@ -42,5 +60,6 @@
U_BOOT_CMD(
sb, 8, 1, do_sb,
"Sandbox status commands",
- "state - Show sandbox state"
+ "handoff - Show handoff data received from SPL\n"
+ "sb state - Show sandbox state"
);
diff --git a/common/board_f.c b/common/board_f.c
index 290e2b0..835b724 100644
--- a/common/board_f.c
+++ b/common/board_f.c
@@ -25,6 +25,9 @@
#include <post.h>
#include <relocate.h>
#include <spi.h>
+#ifdef CONFIG_SPL
+#include <spl.h>
+#endif
#include <status_led.h>
#include <sysreset.h>
#include <timer.h>
@@ -286,6 +289,17 @@
return 0;
}
+static int setup_spl_handoff(void)
+{
+#if CONFIG_IS_ENABLED(HANDOFF)
+ gd->spl_handoff = bloblist_find(BLOBLISTT_SPL_HANDOFF,
+ sizeof(struct spl_handoff));
+ debug("Found SPL hand-off info %p\n", gd->spl_handoff);
+#endif
+
+ return 0;
+}
+
__weak int arch_cpu_init(void)
{
return 0;
@@ -845,6 +859,7 @@
#ifdef CONFIG_BLOBLIST
bloblist_init,
#endif
+ setup_spl_handoff,
initf_console_record,
#if defined(CONFIG_HAVE_FSP)
arch_fsp_init,
diff --git a/common/init/Makefile b/common/init/Makefile
index 4902635..853b56d 100644
--- a/common/init/Makefile
+++ b/common/init/Makefile
@@ -5,3 +5,4 @@
#
obj-y += board_init.o
+obj-$(CONFIG_$(SPL_TPL_)HANDOFF) += handoff.o
diff --git a/common/init/handoff.c b/common/init/handoff.c
new file mode 100644
index 0000000..e00b43e
--- /dev/null
+++ b/common/init/handoff.c
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Passing basic information from SPL to U-Boot proper
+ *
+ * Copyright 2018 Google, Inc
+ */
+
+#include <common.h>
+#include <handoff.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void handoff_save_dram(struct spl_handoff *ho)
+{
+ ho->ram_size = gd->ram_size;
+#ifdef CONFIG_NR_DRAM_BANKS
+ {
+ struct bd_info *bd = gd->bd;
+ int i;
+
+ for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
+ ho->ram_bank[i].start = bd->bi_dram[i].start;
+ ho->ram_bank[i].size = bd->bi_dram[i].size;
+ }
+ }
+#endif
+}
+
+void handoff_load_dram_size(struct spl_handoff *ho)
+{
+ gd->ram_size = ho->ram_size;
+}
+
+void handoff_load_dram_banks(struct spl_handoff *ho)
+{
+#ifdef CONFIG_NR_DRAM_BANKS
+ {
+ struct bd_info *bd = gd->bd;
+ int i;
+
+ for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
+ bd->bi_dram[i].start = ho->ram_bank[i].start;
+ bd->bi_dram[i].size = ho->ram_bank[i].size;
+ }
+ }
+#endif
+}
diff --git a/common/spl/Kconfig b/common/spl/Kconfig
index 32fa575..0ddbffc 100644
--- a/common/spl/Kconfig
+++ b/common/spl/Kconfig
@@ -25,8 +25,28 @@
supports MMC, NAND and YMODEM and other methods loading of U-Boot
and the Linux Kernel. If unsure, say Y.
+config HANDOFF
+ bool "Pass hand-off information from SPL to U-Boot proper"
+ depends on BLOBLIST
+ help
+ It is useful to be able to pass information from SPL to U-Boot
+ proper to preserve state that is known in SPL and is needed in U-Boot.
+ Enable this to locate the handoff information in U-Boot proper, early
+ in boot. It is available in gd->handoff. The state state is set up
+ in SPL (or TPL if that is being used).
+
if SPL
+config SPL_HANDOFF
+ bool "Pass hand-off information from SPL to U-Boot proper"
+ depends on HANDOFF
+ default y
+ help
+ This option enables SPL to write handoff information. This can be
+ used to pass information like the size of SDRAM from SPL to U-Boot
+ proper. Also SPL can receive information from TPL in the same place
+ if that is enabled.
+
config SPL_LDSCRIPT
string "Linker script for the SPL stage"
default "arch/$(ARCH)/cpu/u-boot-spl.lds"
@@ -867,6 +887,16 @@
if TPL
+config TPL_HANDOFF
+ bool "Pass hand-off information from TPL to SPL and U-Boot proper"
+ depends on HANDOFF
+ default y
+ help
+ This option enables TPL to write handoff information. This can be
+ used to pass information like the size of SDRAM from TPL to U-Boot
+ proper. The information is also available to SPL if it is useful
+ there.
+
config TPL_BOARD_INIT
bool "Call board-specific initialization in TPL"
help
diff --git a/common/spl/spl.c b/common/spl/spl.c
index 4313710..35120b6 100644
--- a/common/spl/spl.c
+++ b/common/spl/spl.c
@@ -10,6 +10,7 @@
#include <bloblist.h>
#include <binman_sym.h>
#include <dm.h>
+#include <handoff.h>
#include <spl.h>
#include <asm/u-boot.h>
#include <nand.h>
@@ -45,6 +46,14 @@
*/
__weak void show_boot_progress(int val) {}
+#if defined(CONFIG_SPL_OS_BOOT) || CONFIG_IS_ENABLED(HANDOFF)
+/* weak, default platform-specific function to initialize dram banks */
+__weak int dram_init_banksize(void)
+{
+ return 0;
+}
+#endif
+
/*
* Default function to determine if u-boot or the OS should
* be started. This implementation always returns 1.
@@ -64,14 +73,6 @@
return 1;
}
-/* weak default platform specific function to initialize
- * dram banks
- */
-__weak int dram_init_banksize(void)
-{
- return 0;
-}
-
/*
* Weak default function for arch specific zImage check. Return zero
* and fill start and end address if image is recognized.
@@ -320,6 +321,44 @@
image_entry();
}
+#if CONFIG_IS_ENABLED(HANDOFF)
+/**
+ * Set up the SPL hand-off information
+ *
+ * This is initially empty (zero) but can be written by
+ */
+static int setup_spl_handoff(void)
+{
+ struct spl_handoff *ho;
+
+ ho = bloblist_ensure(BLOBLISTT_SPL_HANDOFF, sizeof(struct spl_handoff));
+ if (!ho)
+ return -ENOENT;
+
+ return 0;
+}
+
+static int write_spl_handoff(void)
+{
+ struct spl_handoff *ho;
+
+ ho = bloblist_find(BLOBLISTT_SPL_HANDOFF, sizeof(struct spl_handoff));
+ if (!ho)
+ return -ENOENT;
+ handoff_save_dram(ho);
+#ifdef CONFIG_SANDBOX
+ ho->arch.magic = TEST_HANDOFF_MAGIC;
+#endif
+ debug(SPL_TPL_PROMPT "Wrote SPL handoff\n");
+
+ return 0;
+}
+#else
+static inline int setup_spl_handoff(void) { return 0; }
+static inline int write_spl_handoff(void) { return 0; }
+
+#endif /* HANDOFF */
+
static int spl_common_init(bool setup_malloc)
{
int ret;
@@ -355,6 +394,15 @@
return ret;
}
}
+ if (CONFIG_IS_ENABLED(HANDOFF)) {
+ int ret;
+
+ ret = setup_spl_handoff();
+ if (ret) {
+ puts(SPL_TPL_PROMPT "Cannot set up SPL handoff\n");
+ hang();
+ }
+ }
if (CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA)) {
ret = fdtdec_setup();
if (ret) {
@@ -503,10 +551,6 @@
spl_set_bd();
-#ifdef CONFIG_SPL_OS_BOOT
- dram_init_banksize();
-#endif
-
#if defined(CONFIG_SYS_SPL_MALLOC_START)
mem_malloc_init(CONFIG_SYS_SPL_MALLOC_START,
CONFIG_SYS_SPL_MALLOC_SIZE);
@@ -528,6 +572,9 @@
spl_board_init();
#endif
+ if (IS_ENABLED(CONFIG_SPL_OS_BOOT) || CONFIG_IS_ENABLED(HANDOFF))
+ dram_init_banksize();
+
bootcount_inc();
memset(&spl_image, '\0', sizeof(spl_image));
@@ -544,6 +591,12 @@
}
spl_perform_fixups(&spl_image);
+ if (CONFIG_IS_ENABLED(HANDOFF)) {
+ ret = write_spl_handoff();
+ if (ret)
+ printf(SPL_TPL_PROMPT
+ "SPL hand-off write failed (err=%d)\n", ret);
+ }
if (CONFIG_IS_ENABLED(BLOBLIST)) {
ret = bloblist_finish();
if (ret)
diff --git a/configs/sandbox_spl_defconfig b/configs/sandbox_spl_defconfig
index f44e80e..452a2ef 100644
--- a/configs/sandbox_spl_defconfig
+++ b/configs/sandbox_spl_defconfig
@@ -22,6 +22,7 @@
CONFIG_CONSOLE_RECORD_OUT_SIZE=0x1000
CONFIG_SILENT_CONSOLE=y
CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_HANDOFF=y
CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_CMD_CPU=y
diff --git a/include/asm-generic/global_data.h b/include/asm-generic/global_data.h
index ccf361e..dffd6b2 100644
--- a/include/asm-generic/global_data.h
+++ b/include/asm-generic/global_data.h
@@ -125,6 +125,9 @@
#if CONFIG_IS_ENABLED(BLOBLIST)
struct bloblist_hdr *bloblist; /* Bloblist information */
struct bloblist_hdr *new_bloblist; /* Relocated blolist info */
+# ifdef CONFIG_SPL
+ struct spl_handoff *spl_handoff;
+# endif
#endif
} gd_t;
#endif
diff --git a/include/handoff.h b/include/handoff.h
new file mode 100644
index 0000000..aacb0f5
--- /dev/null
+++ b/include/handoff.h
@@ -0,0 +1,36 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Passing basic information from SPL to U-Boot proper
+ *
+ * Copyright 2018 Google, Inc
+ */
+
+#ifndef __HANDOFF_H
+#define __HANDOFF_H
+
+#if CONFIG_IS_ENABLED(HANDOFF)
+
+#include <asm/handoff.h>
+
+/**
+ * struct spl_handoff - information passed from SPL to U-Boot proper
+ *
+ * @ram_size: Value to use for gd->ram_size
+ */
+struct spl_handoff {
+ struct arch_spl_handoff arch;
+ u64 ram_size;
+#ifdef CONFIG_NR_DRAM_BANKS
+ struct {
+ u64 start;
+ u64 size;
+ } ram_bank[CONFIG_NR_DRAM_BANKS];
+#endif
+};
+
+void handoff_save_dram(struct spl_handoff *ho);
+void handoff_load_dram_size(struct spl_handoff *ho);
+void handoff_load_dram_banks(struct spl_handoff *ho);
+#endif
+
+#endif
diff --git a/include/spl.h b/include/spl.h
index 205aaff..ee92832 100644
--- a/include/spl.h
+++ b/include/spl.h
@@ -11,6 +11,7 @@
/* Platform-specific defines */
#include <linux/compiler.h>
#include <asm/spl.h>
+#include <handoff.h>
/* Value in r0 indicates we booted from U-Boot */
#define UBOOT_NOT_LOADED_FROM_SPL 0x13578642
diff --git a/test/py/tests/test_handoff.py b/test/py/tests/test_handoff.py
new file mode 100644
index 0000000..0ee9722
--- /dev/null
+++ b/test/py/tests/test_handoff.py
@@ -0,0 +1,15 @@
+# SPDX-License-Identifier: GPL-2.0+
+# Copyright (c) 2016 Google, Inc
+
+import pytest
+
+# Magic number to check that SPL handoff is working
+TEST_HANDOFF_MAGIC = 0x14f93c7b
+
+@pytest.mark.boardspec('sandbox')
+@pytest.mark.buildconfigspec('spl')
+def test_handoff(u_boot_console):
+ """Test that of-platdata can be generated and used in sandbox"""
+ cons = u_boot_console
+ response = cons.run_command('sb handoff')
+ assert ('SPL handoff magic %x' % TEST_HANDOFF_MAGIC) in response
diff --git a/test/run b/test/run
index fb8ff5d..cd323b0 100755
--- a/test/run
+++ b/test/run
@@ -19,7 +19,7 @@
# Run tests which require sandbox_spl
run_test "sandbox_spl" ./test/py/test.py --bd sandbox_spl --build \
- -k test_ofplatdata.py
+ -k 'test_ofplatdata or test_handoff'
# Run tests for the flat-device-tree version of sandbox. This is a special
# build which does not enable CONFIG_OF_LIVE for the live device tree, so we can