doc: man-page for bdinfo
Provide a man-page for the bdinfo command
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
diff --git a/doc/usage/cmd/bdinfo.rst b/doc/usage/cmd/bdinfo.rst
new file mode 100644
index 0000000..6b3cde2
--- /dev/null
+++ b/doc/usage/cmd/bdinfo.rst
@@ -0,0 +1,119 @@
+.. SPDX-License-Identifier: GPL-2.0+
+.. Copyright 2023, Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
+
+bdinfo command
+==============
+
+Synopsis
+--------
+
+::
+
+ bdinfo
+
+Description
+-----------
+
+The *bdinfo* command prints information about the board.
+
+Example
+=======
+
+::
+
+ => bdinfo
+ boot_params = 0x0000000000000000
+ DRAM bank = 0x0000000000000000
+ -> start = 0x0000000040000000
+ -> size = 0x0000000100000000
+ flashstart = 0x0000000000000000
+ flashsize = 0x0000000004000000
+ flashoffset = 0x00000000000e87f8
+ baudrate = 115200 bps
+ relocaddr = 0x000000013fefb000
+ reloc off = 0x000000013fefb000
+ Build = 64-bit
+ current eth = virtio-net#32
+ ethaddr = 52:52:52:52:52:52
+ IP addr = 10.0.2.15
+ fdt_blob = 0x000000013edbadb0
+ new_fdt = 0x000000013edbadb0
+ fdt_size = 0x0000000000100000
+ lmb_dump_all:
+ memory.cnt = 0x1
+ memory[0] [0x40000000-0x13fffffff], 0x100000000 bytes flags: 0
+ reserved.cnt = 0x2
+ reserved[0] [0x13ddb3000-0x13fffffff], 0x0224d000 bytes flags: 0
+ reserved[1] [0x13edb6930-0x13fffffff], 0x012496d0 bytes flags: 0
+ devicetree = board
+ arch_number = 0x0000000000000000
+ TLB addr = 0x000000013fff0000
+ irq_sp = 0x000000013edbada0
+ sp start = 0x000000013edbada0
+ Early malloc usage: 3a8 / 2000
+ =>
+
+boot_params
+ address of the memory area for boot parameters
+
+DRAM bank
+ index, start address and end address of a memory bank
+
+baudrate
+ baud rate of the serial console
+
+relocaddr
+ address to which U-Boot has relocated itself
+
+reloc off
+ relocation offset, difference between *relocaddr* and the text base
+
+Build
+ bitness of the system
+
+current eth
+ name of the active network device
+
+IP addr
+ network address, value of the environment variable *ipaddr*
+
+fdt_blob
+ address of U-Boot's own device tree, NULL if none
+
+new_fdt
+ location of the relocated device tree
+
+fdt_size
+ space reserved for relocated device space
+
+lmb_dump_all
+ available memory and memory reservations
+
+devicetree
+ source of the device-tree
+
+arch_number
+ unique id for the board
+
+TLB addr
+ address of the translation lookaside buffer
+
+irq_sp
+ address of the IRQ stack pointer
+
+sp start
+ initial stack pointer address
+
+Early malloc usage
+ amount of memory used in the early malloc memory and its maximum size
+ as defined by CONFIGSYS_MALLOC_F_LEN
+
+Configuration
+-------------
+
+The bdinfo command is available if CONFIG_CMD_BDI=y.
+
+Return code
+-----------
+
+The return code $? is 0 (true).
diff --git a/doc/usage/index.rst b/doc/usage/index.rst
index 9284d15..7d4a1cb 100644
--- a/doc/usage/index.rst
+++ b/doc/usage/index.rst
@@ -23,6 +23,7 @@
cmd/addrmap
cmd/askenv
cmd/base
+ cmd/bdinfo
cmd/blkcache
cmd/bootd
cmd/bootdev