blob: 68bf93b324aaed9b6c7443a552cbbabd1751f7aa [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2002
* David Mueller, ELSOFT AG, d.mueller@elsoft.ch
*/
#include <common.h>
#include <errno.h>
#include <dm.h>
#include <fdtdec.h>
#if (defined CONFIG_EXYNOS4 || defined CONFIG_EXYNOS5)
#include <asm/arch/clk.h>
#include <asm/arch/cpu.h>
#include <asm/arch/pinmux.h>
#else
#include <asm/arch/s3c24x0_cpu.h>
#endif
#include <asm/io.h>
#include <i2c.h>
#include "s3c24x0_i2c.h"
#ifndef CONFIG_SYS_I2C_S3C24X0_SLAVE
#define SYS_I2C_S3C24X0_SLAVE_ADDR 0
#else
#define SYS_I2C_S3C24X0_SLAVE_ADDR CONFIG_SYS_I2C_S3C24X0_SLAVE
#endif
DECLARE_GLOBAL_DATA_PTR;
/*
* Wait til the byte transfer is completed.
*
* @param i2c- pointer to the appropriate i2c register bank.
* @return I2C_OK, if transmission was ACKED
* I2C_NACK, if transmission was NACKED
* I2C_NOK_TIMEOUT, if transaction did not complete in I2C_TIMEOUT_MS
*/
static int WaitForXfer(struct s3c24x0_i2c *i2c)
{
ulong start_time = get_timer(0);
do {
if (readl(&i2c->iiccon) & I2CCON_IRPND)
return (readl(&i2c->iicstat) & I2CSTAT_NACK) ?
I2C_NACK : I2C_OK;
} while (get_timer(start_time) < I2C_TIMEOUT_MS);
return I2C_NOK_TOUT;
}
static void read_write_byte(struct s3c24x0_i2c *i2c)
{
clrbits_le32(&i2c->iiccon, I2CCON_IRPND);
}
static void i2c_ch_init(struct s3c24x0_i2c *i2c, int speed, int slaveadd)
{
ulong freq, pres = 16, div;
#if (defined CONFIG_EXYNOS4 || defined CONFIG_EXYNOS5)
freq = get_i2c_clk();
#else
freq = get_PCLK();
#endif
/* calculate prescaler and divisor values */
if ((freq / pres / (16 + 1)) > speed)
/* set prescaler to 512 */
pres = 512;
div = 0;
while ((freq / pres / (div + 1)) > speed)
div++;
/* set prescaler, divisor according to freq, also set ACKGEN, IRQ */
writel((div & 0x0F) | 0xA0 | ((pres == 512) ? 0x40 : 0), &i2c->iiccon);
/* init to SLAVE REVEIVE and set slaveaddr */
writel(0, &i2c->iicstat);
writel(slaveadd, &i2c->iicadd);
/* program Master Transmit (and implicit STOP) */
writel(I2C_MODE_MT | I2C_TXRX_ENA, &i2c->iicstat);
}
static int s3c24x0_i2c_set_bus_speed(struct udevice *dev, unsigned int speed)
{
struct s3c24x0_i2c_bus *i2c_bus = dev_get_priv(dev);
i2c_bus->clock_frequency = speed;
i2c_ch_init(i2c_bus->regs, i2c_bus->clock_frequency,
SYS_I2C_S3C24X0_SLAVE_ADDR);
return 0;
}
/*
* cmd_type is 0 for write, 1 for read.
*
* addr_len can take any value from 0-255, it is only limited
* by the char, we could make it larger if needed. If it is
* 0 we skip the address write cycle.
*/
static int i2c_transfer(struct s3c24x0_i2c *i2c,
unsigned char cmd_type,
unsigned char chip,
unsigned char addr[],
unsigned char addr_len,
unsigned char data[],
unsigned short data_len)
{
int i = 0, result;
ulong start_time = get_timer(0);
if (data == 0 || data_len == 0) {
/*Don't support data transfer of no length or to address 0 */
debug("i2c_transfer: bad call\n");
return I2C_NOK;
}
while (readl(&i2c->iicstat) & I2CSTAT_BSY) {
if (get_timer(start_time) > I2C_TIMEOUT_MS)
return I2C_NOK_TOUT;
}
writel(readl(&i2c->iiccon) | I2CCON_ACKGEN, &i2c->iiccon);
/* Get the slave chip address going */
writel(chip, &i2c->iicds);
if ((cmd_type == I2C_WRITE) || (addr && addr_len))
writel(I2C_MODE_MT | I2C_TXRX_ENA | I2C_START_STOP,
&i2c->iicstat);
else
writel(I2C_MODE_MR | I2C_TXRX_ENA | I2C_START_STOP,
&i2c->iicstat);
/* Wait for chip address to transmit. */
result = WaitForXfer(i2c);
if (result != I2C_OK)
goto bailout;
/* If register address needs to be transmitted - do it now. */
if (addr && addr_len) {
while ((i < addr_len) && (result == I2C_OK)) {
writel(addr[i++], &i2c->iicds);
read_write_byte(i2c);
result = WaitForXfer(i2c);
}
i = 0;
if (result != I2C_OK)
goto bailout;
}
switch (cmd_type) {
case I2C_WRITE:
while ((i < data_len) && (result == I2C_OK)) {
writel(data[i++], &i2c->iicds);
read_write_byte(i2c);
result = WaitForXfer(i2c);
}
break;
case I2C_READ:
if (addr && addr_len) {
/*
* Register address has been sent, now send slave chip
* address again to start the actual read transaction.
*/
writel(chip, &i2c->iicds);
/* Generate a re-START. */
writel(I2C_MODE_MR | I2C_TXRX_ENA | I2C_START_STOP,
&i2c->iicstat);
read_write_byte(i2c);
result = WaitForXfer(i2c);
if (result != I2C_OK)
goto bailout;
}
while ((i < data_len) && (result == I2C_OK)) {
/* disable ACK for final READ */
if (i == data_len - 1)
writel(readl(&i2c->iiccon)
& ~I2CCON_ACKGEN,
&i2c->iiccon);
read_write_byte(i2c);
result = WaitForXfer(i2c);
data[i++] = readl(&i2c->iicds);
}
if (result == I2C_NACK)
result = I2C_OK; /* Normal terminated read. */
break;
default:
debug("i2c_transfer: bad call\n");
result = I2C_NOK;
break;
}
bailout:
/* Send STOP. */
writel(I2C_MODE_MR | I2C_TXRX_ENA, &i2c->iicstat);
read_write_byte(i2c);
return result;
}
static int s3c24x0_i2c_probe(struct udevice *dev, uint chip, uint chip_flags)
{
struct s3c24x0_i2c_bus *i2c_bus = dev_get_priv(dev);
uchar buf[1];
int ret;
buf[0] = 0;
/*
* What is needed is to send the chip address and verify that the
* address was <ACK>ed (i.e. there was a chip at that address which
* drove the data line low).
*/
ret = i2c_transfer(i2c_bus->regs, I2C_READ, chip << 1, 0, 0, buf, 1);
return ret != I2C_OK;
}
static int s3c24x0_do_msg(struct s3c24x0_i2c_bus *i2c_bus, struct i2c_msg *msg,
int seq)
{
struct s3c24x0_i2c *i2c = i2c_bus->regs;
bool is_read = msg->flags & I2C_M_RD;
uint status;
uint addr;
int ret, i;
if (!seq)
setbits_le32(&i2c->iiccon, I2CCON_ACKGEN);
/* Get the slave chip address going */
addr = msg->addr << 1;
writel(addr, &i2c->iicds);
status = I2C_TXRX_ENA | I2C_START_STOP;
if (is_read)
status |= I2C_MODE_MR;
else
status |= I2C_MODE_MT;
writel(status, &i2c->iicstat);
if (seq)
read_write_byte(i2c);
/* Wait for chip address to transmit */
ret = WaitForXfer(i2c);
if (ret)
goto err;
if (is_read) {
for (i = 0; !ret && i < msg->len; i++) {
/* disable ACK for final READ */
if (i == msg->len - 1)
clrbits_le32(&i2c->iiccon, I2CCON_ACKGEN);
read_write_byte(i2c);
ret = WaitForXfer(i2c);
msg->buf[i] = readl(&i2c->iicds);
}
if (ret == I2C_NACK)
ret = I2C_OK; /* Normal terminated read */
} else {
for (i = 0; !ret && i < msg->len; i++) {
writel(msg->buf[i], &i2c->iicds);
read_write_byte(i2c);
ret = WaitForXfer(i2c);
}
}
err:
return ret;
}
static int s3c24x0_i2c_xfer(struct udevice *dev, struct i2c_msg *msg,
int nmsgs)
{
struct s3c24x0_i2c_bus *i2c_bus = dev_get_priv(dev);
struct s3c24x0_i2c *i2c = i2c_bus->regs;
ulong start_time;
int ret, i;
start_time = get_timer(0);
while (readl(&i2c->iicstat) & I2CSTAT_BSY) {
if (get_timer(start_time) > I2C_TIMEOUT_MS) {
debug("Timeout\n");
return -ETIMEDOUT;
}
}
for (ret = 0, i = 0; !ret && i < nmsgs; i++)
ret = s3c24x0_do_msg(i2c_bus, &msg[i], i);
/* Send STOP */
writel(I2C_MODE_MR | I2C_TXRX_ENA, &i2c->iicstat);
read_write_byte(i2c);
return ret ? -EREMOTEIO : 0;
}
static int s3c_i2c_ofdata_to_platdata(struct udevice *dev)
{
const void *blob = gd->fdt_blob;
struct s3c24x0_i2c_bus *i2c_bus = dev_get_priv(dev);
int node;
node = dev_of_offset(dev);
i2c_bus->regs = (struct s3c24x0_i2c *)devfdt_get_addr(dev);
i2c_bus->id = pinmux_decode_periph_id(blob, node);
i2c_bus->clock_frequency =
dev_read_u32_default(dev, "clock-frequency",
I2C_SPEED_STANDARD_RATE);
i2c_bus->node = node;
i2c_bus->bus_num = dev->seq;
exynos_pinmux_config(i2c_bus->id, 0);
i2c_bus->active = true;
return 0;
}
static const struct dm_i2c_ops s3c_i2c_ops = {
.xfer = s3c24x0_i2c_xfer,
.probe_chip = s3c24x0_i2c_probe,
.set_bus_speed = s3c24x0_i2c_set_bus_speed,
};
static const struct udevice_id s3c_i2c_ids[] = {
{ .compatible = "samsung,s3c2440-i2c" },
{ }
};
U_BOOT_DRIVER(i2c_s3c) = {
.name = "i2c_s3c",
.id = UCLASS_I2C,
.of_match = s3c_i2c_ids,
.ofdata_to_platdata = s3c_i2c_ofdata_to_platdata,
.priv_auto_alloc_size = sizeof(struct s3c24x0_i2c_bus),
.ops = &s3c_i2c_ops,
};