net: tsec: Fix mac addr setup portability, cleanup
Fix the 32-bit memory access that is not "endianess safe",
i.e. not giving the desired byte layout for LE cpus:
tempval = *((uint *) (tmpbuf + 4)), where 'char tmpbuf[]'.
Free the stack from rendundant local vars:
tmpbuf[] and i.
Use a portable type (u32) for the 32bit tsec register value
holder: tempval.
Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com>
diff --git a/drivers/net/tsec.c b/drivers/net/tsec.c
index 082cdec..e9138f0 100644
--- a/drivers/net/tsec.c
+++ b/drivers/net/tsec.c
@@ -473,11 +473,9 @@
*/
static int tsec_init(struct eth_device *dev, bd_t * bd)
{
- uint tempval;
- char tmpbuf[MAC_ADDR_LEN];
- int i;
struct tsec_private *priv = (struct tsec_private *)dev->priv;
struct tsec __iomem *regs = priv->regs;
+ u32 tempval;
int ret;
/* Make sure the controller is stopped */
@@ -490,16 +488,16 @@
out_be32(®s->ecntrl, ECNTRL_INIT_SETTINGS);
/* Copy the station address into the address registers.
- * Backwards, because little endian MACS are dumb */
- for (i = 0; i < MAC_ADDR_LEN; i++)
- tmpbuf[MAC_ADDR_LEN - 1 - i] = dev->enetaddr[i];
-
- tempval = (tmpbuf[0] << 24) | (tmpbuf[1] << 16) | (tmpbuf[2] << 8) |
- tmpbuf[3];
+ * For a station address of 0x12345678ABCD in transmission
+ * order (BE), MACnADDR1 is set to 0xCDAB7856 and
+ * MACnADDR2 is set to 0x34120000.
+ */
+ tempval = (dev->enetaddr[5] << 24) | (dev->enetaddr[4] << 16) |
+ (dev->enetaddr[3] << 8) | dev->enetaddr[2];
out_be32(®s->macstnaddr1, tempval);
- tempval = *((uint *) (tmpbuf + 4));
+ tempval = (dev->enetaddr[1] << 24) | (dev->enetaddr[0] << 16);
out_be32(®s->macstnaddr2, tempval);