arm: dts: k3-am625-sk-r5/u-boot: Drop duplicate bootph-nodes
Kernel dts import now provides bootph-all and bootph-pre-ram properties
for the properties we have been overriding so far. Drop the same.
While at this enable the DM and TIFS UARTs for programming pinmux
since they are marked reserved by board.dts
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Tested-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
diff --git a/arch/arm/dts/k3-am625-r5-sk.dts b/arch/arm/dts/k3-am625-r5-sk.dts
index 55420b2..6b9f40e 100644
--- a/arch/arm/dts/k3-am625-r5-sk.dts
+++ b/arch/arm/dts/k3-am625-r5-sk.dts
@@ -69,22 +69,14 @@
};
};
-&wkup_uart0_pins_default {
- bootph-pre-ram;
-};
-
-&main_uart1_pins_default {
- bootph-pre-ram;
-};
-
/* WKUP UART0 is used for DM firmware logs */
&wkup_uart0 {
- bootph-pre-ram;
+ status = "okay";
};
/* Main UART1 is used for TIFS firmware logs */
&main_uart1 {
- bootph-pre-ram;
+ status = "okay";
};
&ospi0 {
diff --git a/arch/arm/dts/k3-am625-sk-u-boot.dtsi b/arch/arm/dts/k3-am625-sk-u-boot.dtsi
index dcf7c76..fa778b0 100644
--- a/arch/arm/dts/k3-am625-sk-u-boot.dtsi
+++ b/arch/arm/dts/k3-am625-sk-u-boot.dtsi
@@ -8,71 +8,14 @@
/ {
chosen {
- stdout-path = "serial2:115200n8";
tick-timer = &main_timer0;
};
-
- aliases {
- mmc1 = &sdhci1;
- };
-
- memory@80000000 {
- bootph-all;
- };
-};
-
-&main_conf {
- bootph-all;
};
&main_timer0 {
clock-frequency = <25000000>;
};
-&main_uart0 {
- bootph-all;
-};
-
-&main_uart0_pins_default {
- bootph-all;
-};
-
-&sdhci1 {
- bootph-all;
-};
-
-&main_mmc1_pins_default {
- bootph-all;
-};
-
-&fss {
- bootph-all;
-};
-
-&ospi0_pins_default {
- bootph-all;
-};
-
-&ospi0 {
- bootph-all;
-
- flash@0 {
- bootph-all;
-
- partitions {
- bootph-all;
-
- partition@3fc0000 {
- bootph-all;
- };
- };
- };
-};
-
-&inta_main_dmss {
- bootph-all;
-};
-
&main_bcdma {
reg = <0x00 0x485c0100 0x00 0x100>,
<0x00 0x4c000000 0x00 0x20000>,
@@ -100,41 +43,6 @@
bootph-all;
};
-&cpsw3g_mdio {
- bootph-all;
-};
-
-&cpsw3g_phy0 {
- bootph-all;
-};
-
-&cpsw3g_phy1 {
- bootph-all;
-};
-
-&main_rgmii1_pins_default {
- bootph-all;
-};
-
-&main_rgmii2_pins_default {
- bootph-all;
-};
-
-&phy_gmii_sel {
- bootph-all;
-};
-
-&cpsw3g {
- bootph-all;
- ethernet-ports {
- bootph-all;
- };
-};
-
-&cpsw_port1 {
- bootph-all;
-};
-
&cpsw_port2 {
status = "disabled";
};