arm: armada: dts: Add support for ap807-based platforms
Add support for SoCs based on AP807 die.
Remove unused include file for Armada-8020 SoC.
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Signed-off-by: Stefan Roese <sr@denx.de>
diff --git a/arch/arm/dts/armada-7040.dtsi b/arch/arm/dts/armada-7040.dtsi
index ee9716a..039d30c 100644
--- a/arch/arm/dts/armada-7040.dtsi
+++ b/arch/arm/dts/armada-7040.dtsi
@@ -11,7 +11,8 @@
#include <dt-bindings/gpio/gpio.h>
#include "armada-common.dtsi"
#include "armada-8k.dtsi"
-#include "armada-ap806-quad.dtsi"
+#include "armada-ap806.dtsi"
+#include "armada-ap80x-quad.dtsi"
/* CP110-0 Settings */
#define CP110_NAME cp0
diff --git a/arch/arm/dts/armada-8020.dtsi b/arch/arm/dts/armada-8020.dtsi
deleted file mode 100644
index 4c71cf3..0000000
--- a/arch/arm/dts/armada-8020.dtsi
+++ /dev/null
@@ -1,37 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2016- 2021 Marvell International Ltd.
- */
-
-/*
- * Device Tree file for the Armada 8020 SoC, made of an AP806 Dual and
- * two CP110.
- */
-
-#include "armada-common.dtsi"
-#include "armada-8k.dtsi"
-#include "armada-ap806-dual.dtsi"
-
-/* CP110-0 Settings */
-#define CP110_NAME cp0
-#define CP110_NUM 0
-
-#include "armada-cp110.dtsi"
-
-#undef CP110_NAME
-#undef CP110_NUM
-
-/* CP110-1 Settings */
-#define CP110_NAME cp1
-#define CP110_NUM 1
-
-#include "armada-cp110.dtsi"
-
-#undef CP110_NAME
-#undef CP110_NUM
-
-/ {
- model = "Marvell Armada 8020";
- compatible = "marvell,armada8020", "marvell,armada-ap806-dual",
- "marvell,armada-ap806";
-};
diff --git a/arch/arm/dts/armada-8040.dtsi b/arch/arm/dts/armada-8040.dtsi
index 1d77e75..5123742 100644
--- a/arch/arm/dts/armada-8040.dtsi
+++ b/arch/arm/dts/armada-8040.dtsi
@@ -11,7 +11,8 @@
#include <dt-bindings/gpio/gpio.h>
#include "armada-common.dtsi"
#include "armada-8k.dtsi"
-#include "armada-ap806-quad.dtsi"
+#include "armada-ap806.dtsi"
+#include "armada-ap80x-quad.dtsi"
/* CP110-0 Settings */
#define CP110_NAME cp0
diff --git a/arch/arm/dts/armada-ap806-quad.dtsi b/arch/arm/dts/armada-ap806-quad.dtsi
deleted file mode 100644
index ba43a43..0000000
--- a/arch/arm/dts/armada-ap806-quad.dtsi
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * Copyright (C) 2016 Marvell Technology Group Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPLv2 or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/*
- * Device Tree file for Marvell Armada AP806.
- */
-
-#include "armada-ap806.dtsi"
-
-/ {
- model = "Marvell Armada AP806 Quad";
- compatible = "marvell,armada-ap806-quad", "marvell,armada-ap806";
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu@000 {
- device_type = "cpu";
- compatible = "arm,cortex-a72", "arm,armv8";
- reg = <0x000>;
- enable-method = "psci";
- };
- cpu@001 {
- device_type = "cpu";
- compatible = "arm,cortex-a72", "arm,armv8";
- reg = <0x001>;
- enable-method = "psci";
- };
- cpu@100 {
- device_type = "cpu";
- compatible = "arm,cortex-a72", "arm,armv8";
- reg = <0x100>;
- enable-method = "psci";
- };
- cpu@101 {
- device_type = "cpu";
- compatible = "arm,cortex-a72", "arm,armv8";
- reg = <0x101>;
- enable-method = "psci";
- };
- };
-};
diff --git a/arch/arm/dts/armada-ap806.dtsi b/arch/arm/dts/armada-ap806.dtsi
index 713c2db..f432089 100644
--- a/arch/arm/dts/armada-ap806.dtsi
+++ b/arch/arm/dts/armada-ap806.dtsi
@@ -1,274 +1,39 @@
+// SPDX-License-Identifier: GPL-2.0
/*
- * Copyright (C) 2016 Marvell Technology Group Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPLv2 or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
+ * Copyright (C) 2020 Marvell International Ltd.
*/
/*
* Device Tree file for Marvell Armada AP806.
*/
-#include <dt-bindings/interrupt-controller/arm-gic.h>
+/* AP806 Settings */
+#define AP_NAME ap806
-/dts-v1/;
+#include "armada-ap80x.dtsi"
/ {
model = "Marvell Armada AP806";
- compatible = "marvell,armada-ap806";
- #address-cells = <2>;
- #size-cells = <2>;
- aliases {
- serial0 = &uart0;
- serial1 = &uart1;
- };
-
- psci {
- compatible = "arm,psci-0.2";
- method = "smc";
- };
-
- reserved-memory {
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
-
- psci-area@4000000 {
- reg = <0x0 0x4000000 0x0 0x200000>;
- no-map;
- };
- };
-
- ap806 {
- #address-cells = <2>;
- #size-cells = <2>;
- compatible = "simple-bus";
- interrupt-parent = <&gic>;
- ranges;
-
+ AP_NAME {
config-space {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "simple-bus";
- ranges = <0x0 0x0 0xf0000000 0x1000000>;
-
- gic: interrupt-controller@210000 {
- compatible = "arm,gic-400";
- #interrupt-cells = <3>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- interrupt-controller;
- interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
- reg = <0x210000 0x10000>,
- <0x220000 0x20000>,
- <0x240000 0x20000>,
- <0x260000 0x20000>;
-
- gic_v2m0: v2m@280000 {
- compatible = "arm,gic-v2m-frame";
- msi-controller;
- reg = <0x280000 0x1000>;
- arm,msi-base-spi = <160>;
- arm,msi-num-spis = <32>;
- };
- gic_v2m1: v2m@290000 {
- compatible = "arm,gic-v2m-frame";
- msi-controller;
- reg = <0x290000 0x1000>;
- arm,msi-base-spi = <192>;
- arm,msi-num-spis = <32>;
- };
- gic_v2m2: v2m@2a0000 {
- compatible = "arm,gic-v2m-frame";
- msi-controller;
- reg = <0x2a0000 0x1000>;
- arm,msi-base-spi = <224>;
- arm,msi-num-spis = <32>;
- };
- gic_v2m3: v2m@2b0000 {
- compatible = "arm,gic-v2m-frame";
- msi-controller;
- reg = <0x2b0000 0x1000>;
- arm,msi-base-spi = <256>;
- arm,msi-num-spis = <32>;
- };
+ sar-reg {
+ compatible = "marvell,sample-at-reset-common",
+ "marvell,sample-at-reset-ap806";
+ reg = <0x6F8200 0x8>;
+ sar-driver = "ap806_sar";
+ sar-name = "ap806_sar";
+ status = "okay";
};
- timer {
- compatible = "arm,armv8-timer";
- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>,
- <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>,
- <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>,
- <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
- };
-
- odmi: odmi@300000 {
- compatible = "marvell,odmi-controller";
- interrupt-controller;
- msi-controller;
- marvell,odmi-frames = <4>;
- reg = <0x300000 0x4000>,
- <0x304000 0x4000>,
- <0x308000 0x4000>,
- <0x30C000 0x4000>;
- marvell,spi-base = <128>, <136>, <144>, <152>;
- };
-
- ap_pinctl: ap-pinctl@6F4000 {
- compatible = "marvell,ap806-pinctrl";
- bank-name ="apn-806";
- reg = <0x6F4000 0x10>;
- pin-count = <20>;
- max-func = <3>;
-
- ap_i2c0_pins: i2c-pins-0 {
- marvell,pins = < 4 5 >;
- marvell,function = <3>;
- };
- ap_emmc_pins: emmc-pins-0 {
- marvell,pins = < 0 1 2 3 4 5 6 7
- 8 9 10 >;
- marvell,function = <1>;
- };
- };
-
- ap_gpio0: gpio@6F5040 {
- compatible = "marvell,orion-gpio";
- reg = <0x6F5040 0x40>;
- ngpios = <20>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- xor@400000 {
- compatible = "marvell,mv-xor-v2";
- reg = <0x400000 0x1000>,
- <0x410000 0x1000>;
- msi-parent = <&gic_v2m0>;
- dma-coherent;
- };
-
- xor@420000 {
- compatible = "marvell,mv-xor-v2";
- reg = <0x420000 0x1000>,
- <0x430000 0x1000>;
- msi-parent = <&gic_v2m0>;
- dma-coherent;
- };
-
- xor@440000 {
- compatible = "marvell,mv-xor-v2";
- reg = <0x440000 0x1000>,
- <0x450000 0x1000>;
- msi-parent = <&gic_v2m0>;
- dma-coherent;
- };
-
- xor@460000 {
- compatible = "marvell,mv-xor-v2";
- reg = <0x460000 0x1000>,
- <0x470000 0x1000>;
- msi-parent = <&gic_v2m0>;
- dma-coherent;
- };
-
- spi0: spi@510600 {
- compatible = "marvell,armada-380-spi";
- reg = <0x510600 0x50>;
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ap_syscon 3>;
- status = "disabled";
- };
-
- i2c0: i2c@511000 {
- compatible = "marvell,mv78230-i2c";
- reg = <0x511000 0x20>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
- timeout-ms = <1000>;
- clocks = <&ap_syscon 3>;
- status = "disabled";
- };
-
- uart0: serial@512000 {
- compatible = "snps,dw-apb-uart";
- reg = <0x512000 0x100>;
- reg-shift = <2>;
- interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
- reg-io-width = <1>;
- clocks = <&ap_syscon 3>;
- status = "disabled";
- clock-frequency = <200000000>;
- };
-
- uart1: serial@512100 {
- compatible = "snps,dw-apb-uart";
- reg = <0x512100 0x100>;
- reg-shift = <2>;
- interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
- reg-io-width = <1>;
- clocks = <&ap_syscon 3>;
- status = "disabled";
-
- };
-
- ap_sdhci0: sdhci@6e0000 {
- compatible = "marvell,armada-8k-sdhci";
- reg = <0x6e0000 0x300>;
- interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
- dma-coherent;
- status = "disabled";
- };
-
- ap_syscon: system-controller@6f4000 {
- compatible = "marvell,ap806-system-controller",
- "syscon";
- #clock-cells = <1>;
- clock-output-names = "ap-cpu-cluster-0",
- "ap-cpu-cluster-1",
- "ap-fixed", "ap-mss";
- reg = <0x6f4000 0x1000>;
+ thermal: thermal@6f8084 {
+ compatible = "marvell,mvebu-thermal",
+ "marvell,thermal-ext-sensor";
+ reg = <0x6f8084 0x12>;
+ gain = <425>;
+ offset = <153400>;
+ divisor = <1000>;
+ status = "okay";
};
};
};
diff --git a/arch/arm/dts/armada-ap807.dtsi b/arch/arm/dts/armada-ap807.dtsi
new file mode 100644
index 0000000..a5309f3
--- /dev/null
+++ b/arch/arm/dts/armada-ap807.dtsi
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 Marvell International Ltd.
+ */
+
+/*
+ * Device Tree file for Marvell Armada AP807.
+ */
+
+/* AP807 Settings */
+#define AP_NAME ap807
+
+#include "armada-ap80x.dtsi"
+
+/ {
+ model = "Marvell Armada AP807";
+
+ AP_NAME {
+ config-space {
+ sar-reg {
+ compatible = "marvell,sample-at-reset-common",
+ "marvell,sample-at-reset-ap807";
+ reg = <0x6F8200 0x8>;
+ sar-driver = "ap807_sar";
+ sar-name = "ap807_sar";
+ status = "okay";
+ };
+
+ thermal: thermal@6f8084 {
+ compatible = "marvell,mvebu-thermal",
+ "marvell,thermal-ext-sensor";
+ reg = <0x6f8084 0x12>;
+ gain = <394>;
+ offset = <128900>;
+ divisor = <1000>;
+ status = "okay";
+ };
+ };
+ };
+};
diff --git a/arch/arm/dts/armada-ap80x-quad.dtsi b/arch/arm/dts/armada-ap80x-quad.dtsi
new file mode 100644
index 0000000..1220e98
--- /dev/null
+++ b/arch/arm/dts/armada-ap80x-quad.dtsi
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ */
+
+/*
+ * Device Tree file for Marvell Armada AP806/AP807.
+ */
+
+/ {
+ model = "Marvell Armada AP80X Quad";
+ compatible = "marvell,armada-ap806-quad", "marvell,armada-ap806";
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@000 {
+ clocks;
+ u-boot,dm-pre-reloc;
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x000>;
+ enable-method = "psci";
+ };
+ cpu@001 {
+ clocks;
+ u-boot,dm-pre-reloc;
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x001>;
+ enable-method = "psci";
+ };
+ cpu@100 {
+ clocks;
+ u-boot,dm-pre-reloc;
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x100>;
+ enable-method = "psci";
+ };
+ cpu@101 {
+ clocks;
+ u-boot,dm-pre-reloc;
+ device_type = "cpu";
+ compatible = "arm,cortex-a72", "arm,armv8";
+ reg = <0x101>;
+ enable-method = "psci";
+ };
+ };
+};
diff --git a/arch/arm/dts/armada-ap80x.dtsi b/arch/arm/dts/armada-ap80x.dtsi
new file mode 100644
index 0000000..8787a87
--- /dev/null
+++ b/arch/arm/dts/armada-ap80x.dtsi
@@ -0,0 +1,211 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 Marvell International Ltd.
+ *
+ */
+
+/*
+ * Device Tree file for Marvell Armada AP806/AP807.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/dts-v1/;
+
+/ {
+ compatible = "marvell,armada-ap806";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ psci-area@4000000 {
+ reg = <0x0 0x4000000 0x0 0x200000>;
+ no-map;
+ };
+ };
+
+ AP_NAME {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ compatible = "simple-bus";
+ interrupt-parent = <&gic>;
+ ranges;
+
+ config-space {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges = <0x0 0x0 0xf0000000 0x1000000>;
+
+ gic: interrupt-controller@210000 {
+ compatible = "arm,gic-400";
+ #interrupt-cells = <3>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ interrupt-controller;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ reg = <0x210000 0x10000>,
+ <0x220000 0x20000>,
+ <0x240000 0x20000>,
+ <0x260000 0x20000>;
+
+ gic_v2m0: v2m@280000 {
+ compatible = "arm,gic-v2m-frame";
+ msi-controller;
+ reg = <0x280000 0x1000>;
+ arm,msi-base-spi = <160>;
+ arm,msi-num-spis = <32>;
+ };
+ gic_v2m1: v2m@290000 {
+ compatible = "arm,gic-v2m-frame";
+ msi-controller;
+ reg = <0x290000 0x1000>;
+ arm,msi-base-spi = <192>;
+ arm,msi-num-spis = <32>;
+ };
+ gic_v2m2: v2m@2a0000 {
+ compatible = "arm,gic-v2m-frame";
+ msi-controller;
+ reg = <0x2a0000 0x1000>;
+ arm,msi-base-spi = <224>;
+ arm,msi-num-spis = <32>;
+ };
+ gic_v2m3: v2m@2b0000 {
+ compatible = "arm,gic-v2m-frame";
+ msi-controller;
+ reg = <0x2b0000 0x1000>;
+ arm,msi-base-spi = <256>;
+ arm,msi-num-spis = <32>;
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
+ };
+
+ odmi: odmi@300000 {
+ compatible = "marvell,odmi-controller";
+ interrupt-controller;
+ msi-controller;
+ marvell,odmi-frames = <4>;
+ reg = <0x300000 0x4000>,
+ <0x304000 0x4000>,
+ <0x308000 0x4000>,
+ <0x30C000 0x4000>;
+ marvell,spi-base = <128>, <136>, <144>, <152>;
+ };
+
+ ap_pinctl: ap-pinctl@6F4000 {
+ compatible = "marvell,ap806-pinctrl";
+ bank-name ="apn-806";
+ reg = <0x6F4000 0x10>;
+ pin-count = <20>;
+ max-func = <3>;
+
+ ap_i2c0_pins: i2c-pins-0 {
+ marvell,pins = < 4 5 >;
+ marvell,function = <3>;
+ };
+ ap_emmc_pins: emmc-pins-0 {
+ marvell,pins = < 0 1 2 3 4 5 6 7
+ 8 9 10 12 >;
+ marvell,function = <1>;
+ };
+ };
+
+ ap_gpio0: gpio@6F5040 {
+ compatible = "marvell,orion-gpio";
+ reg = <0x6F5040 0x40>;
+ ngpios = <20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ ap_spi0: spi@510600 {
+ compatible = "marvell,armada-380-spi";
+ reg = <0x510600 0x50>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <0>;
+ interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ap_syscon 3>;
+ status = "disabled";
+ };
+
+ ap_i2c0: i2c@511000 {
+ compatible = "marvell,mv78230-i2c";
+ reg = <0x511000 0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+ timeout-ms = <1000>;
+ clocks = <&ap_syscon 3>;
+ status = "disabled";
+ };
+
+ uart0: serial@512000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x512000 0x100>;
+ reg-shift = <2>;
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+ reg-io-width = <1>;
+ clocks = <&ap_syscon 3>;
+ status = "disabled";
+ clock-frequency = <200000000>;
+ };
+
+ uart1: serial@512100 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x512100 0x100>;
+ reg-shift = <2>;
+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+ reg-io-width = <1>;
+ clocks = <&ap_syscon 3>;
+ status = "disabled";
+
+ };
+
+ watchdog: watchdog@610000 {
+ compatible = "arm,sbsa-gwdt";
+ reg = <0x610000 0x1000>, <0x600000 0x1000>;
+ };
+
+ ap_sdhci0: sdhci@6e0000 {
+ compatible = "marvell,armada-8k-sdhci";
+ reg = <0x6e0000 0x300>;
+ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+ dma-coherent;
+ status = "disabled";
+ };
+
+ ap_syscon: system-controller@6f4000 {
+ compatible = "marvell,ap806-system-controller",
+ "syscon";
+ #clock-cells = <1>;
+ clock-output-names = "ap-cpu-cluster-0",
+ "ap-cpu-cluster-1",
+ "ap-fixed", "ap-mss";
+ reg = <0x6f4000 0x1000>;
+ };
+ };
+ };
+};