Minor code cleanup.
diff --git a/board/BuS/EB+MCF-EV123/Makefile b/board/BuS/EB+MCF-EV123/Makefile
index d5dbc71..0596572 100644
--- a/board/BuS/EB+MCF-EV123/Makefile
+++ b/board/BuS/EB+MCF-EV123/Makefile
@@ -25,7 +25,7 @@
LIB = lib$(BOARD).a
-OBJS = $(BOARD).o cfm_flash.o flash.o VCxK.o
+OBJS = $(BOARD).o cfm_flash.o flash.o VCxK.o
$(LIB): .depend $(OBJS)
$(AR) crv $@ $(OBJS)
diff --git a/board/BuS/EB+MCF-EV123/VCxK.c b/board/BuS/EB+MCF-EV123/VCxK.c
index 736c101..4938817 100644
--- a/board/BuS/EB+MCF-EV123/VCxK.c
+++ b/board/BuS/EB+MCF-EV123/VCxK.c
@@ -1,5 +1,5 @@
/*
- * (C) Copyright 2005
+ * (C) Copyright 2005
* BuS Elektronik GmbH & Co.KG <esw@bus-elektonik.de>
*
* See file CREDITS for list of people who contributed to this
diff --git a/board/BuS/EB+MCF-EV123/cfm_flash.c b/board/BuS/EB+MCF-EV123/cfm_flash.c
index d5a1c30..6ecf0d1 100644
--- a/board/BuS/EB+MCF-EV123/cfm_flash.c
+++ b/board/BuS/EB+MCF-EV123/cfm_flash.c
@@ -22,7 +22,7 @@
* MA 02111-1307 USA
*/
-#include <common.h>
+#include <common.h>
#include <asm/m5282.h>
#include "cfm_flash.h"
diff --git a/board/BuS/EB+MCF-EV123/flash.c b/board/BuS/EB+MCF-EV123/flash.c
index a5d621c..ba76bef 100644
--- a/board/BuS/EB+MCF-EV123/flash.c
+++ b/board/BuS/EB+MCF-EV123/flash.c
@@ -1,7 +1,7 @@
/*
- * (C) Copyright 2005
+ * (C) Copyright 2005
* BuS Elektronik GmbH & Co.KG <esw@bus-elektonik.de>
- *
+ *
* Based On
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
diff --git a/cpu/mcf52x2/fec.c b/cpu/mcf52x2/fec.c
index 702563d..6db6214 100644
--- a/cpu/mcf52x2/fec.c
+++ b/cpu/mcf52x2/fec.c
@@ -283,7 +283,7 @@
rtx = (RTXBD *) CFG_ENET_BD_BASE;
#else
rtx = (RTXBD *) (CFG_MONITOR_BASE+gd->reloc_off -
- (((PKTBUFSRX+TX_BUF_CNT)*+sizeof(cbd_t)
+ (((PKTBUFSRX+TX_BUF_CNT)*+sizeof(cbd_t)
+0xFF)
& ~0xFF)
);
@@ -327,13 +327,13 @@
fecp->fec_r_cntrl = FEC_RCNTRL_MII_MODE;
fecp->fec_x_cntrl = FEC_TCNTRL_FDEN;
#else /* Half duplex mode */
- fecp->fec_r_cntrl = (PKT_MAXBUF_SIZE << 16); /* set max frame length */
+ fecp->fec_r_cntrl = (PKT_MAXBUF_SIZE << 16); /* set max frame length */
fecp->fec_r_cntrl |= FEC_RCNTRL_MII_MODE | FEC_RCNTRL_DRT;
fecp->fec_x_cntrl = 0;
#endif
/* Set MII speed */
- fecp->fec_mii_speed = (((CFG_CLK / 2) / (2500000 / 10)) + 5) / 10;
- fecp->fec_mii_speed *= 2;
+ fecp->fec_mii_speed = (((CFG_CLK / 2) / (2500000 / 10)) + 5) / 10;
+ fecp->fec_mii_speed *= 2;
/* Configure port B for MII.
*/
diff --git a/include/asm-m68k/immap_5282.h b/include/asm-m68k/immap_5282.h
index a95912f..6553b08 100644
--- a/include/asm-m68k/immap_5282.h
+++ b/include/asm-m68k/immap_5282.h
@@ -13,7 +13,7 @@
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
@@ -41,47 +41,45 @@
/* TODO: finish these */
};
-
-
/* Fast ethernet controller registers
*/
typedef struct fec {
- uint res1; /* reserved 1000*/
- uint fec_ievent; /* interrupt event register 1004*/ /* EIR */
- uint fec_imask; /* interrupt mask register 1008*/ /* EIMR */
- uint res2; /* reserved 100c*/
- uint fec_r_des_active; /* Rx ring updated flag 1010*/ /* RDAR */
- uint fec_x_des_active; /* Tx ring updated flag 1014*/ /* XDAR */
- uint res3[3]; /* reserved 1018*/
- uint fec_ecntrl; /* ethernet control register 1024*/ /* ECR */
- uint res4[6]; /* reserved 1028*/
- uint fec_mii_data; /* MII data register 1040*/ /* MDATA */
- uint fec_mii_speed; /* MII speed control register 1044*/ /* MSCR */
- /*1044*/
- uint res5[7]; /* reserved 1048*/
- uint fec_mibc; /* MIB Control/Status register 1064*/ /* MIBC */
- uint res6[7]; /* reserved 1068*/
- uint fec_r_cntrl; /* Rx control register 1084*/ /* RCR */
- uint res7[15]; /* reserved 1088*/
- uint fec_x_cntrl; /* Tx control register 10C4*/ /* TCR */
- uint res8[7]; /* reserved 10C8*/
- uint fec_addr_low; /* lower 32 bits of station address */ /* PALR */
- uint fec_addr_high; /* upper 16 bits of station address */ /* PAUR */
- uint fec_opd; /* opcode + pause duration 10EC*/ /* OPD */
- uint res9[10]; /* reserved 10F0*/
- uint fec_ihash_table_high; /* upper 32-bits of individual hash *//* IAUR */
- uint fec_ihash_table_low; /* lower 32-bits of individual hash *//* IALR */
- uint fec_ghash_table_high; /* upper 32-bits of group hash *//* GAUR */
- uint fec_ghash_table_low; /* lower 32-bits of group hash *//* GALR */
- uint res10[7]; /* reserved 1128*/
- uint fec_tfwr; /* Transmit FIFO watermark 1144*/ /* TFWR */
- uint res11; /* reserved 1148*/
- uint fec_r_bound; /* FIFO Receive Bound Register = end of *//* FRBR */
- uint fec_r_fstart; /* FIFO Receive FIfo Start Registers = *//* FRSR */
- uint res12[11]; /* reserved 1154*/
- uint fec_r_des_start;/* beginning of Rx descriptor ring 1180*//* ERDSR */
- uint fec_x_des_start;/* beginning of Tx descriptor ring 1184*//* ETDSR */
- uint fec_r_buff_size;/* Rx buffer size 1188*/ /* EMRBR */
+ uint res1; /* reserved 1000*/
+ uint fec_ievent; /* interrupt event register 1004*/ /* EIR */
+ uint fec_imask; /* interrupt mask register 1008*/ /* EIMR */
+ uint res2; /* reserved 100c*/
+ uint fec_r_des_active; /* Rx ring updated flag 1010*/ /* RDAR */
+ uint fec_x_des_active; /* Tx ring updated flag 1014*/ /* XDAR */
+ uint res3[3]; /* reserved 1018*/
+ uint fec_ecntrl; /* ethernet control register 1024*/ /* ECR */
+ uint res4[6]; /* reserved 1028*/
+ uint fec_mii_data; /* MII data register 1040*/ /* MDATA */
+ uint fec_mii_speed; /* MII speed control register 1044*/ /* MSCR */
+ /*1044*/
+ uint res5[7]; /* reserved 1048*/
+ uint fec_mibc; /* MIB Control/Status register 1064*/ /* MIBC */
+ uint res6[7]; /* reserved 1068*/
+ uint fec_r_cntrl; /* Rx control register 1084*/ /* RCR */
+ uint res7[15]; /* reserved 1088*/
+ uint fec_x_cntrl; /* Tx control register 10C4*/ /* TCR */
+ uint res8[7]; /* reserved 10C8*/
+ uint fec_addr_low; /* lower 32 bits of station address */ /* PALR */
+ uint fec_addr_high; /* upper 16 bits of station address */ /* PAUR */
+ uint fec_opd; /* opcode + pause duration 10EC*/ /* OPD */
+ uint res9[10]; /* reserved 10F0*/
+ uint fec_ihash_table_high; /* upper 32-bits of individual hash */ /* IAUR */
+ uint fec_ihash_table_low; /* lower 32-bits of individual hash */ /* IALR */
+ uint fec_ghash_table_high; /* upper 32-bits of group hash */ /* GAUR */
+ uint fec_ghash_table_low; /* lower 32-bits of group hash */ /* GALR */
+ uint res10[7]; /* reserved 1128*/
+ uint fec_tfwr; /* Transmit FIFO watermark 1144*/ /* TFWR */
+ uint res11; /* reserved 1148*/
+ uint fec_r_bound; /* FIFO Receive Bound Register = end of */ /* FRBR */
+ uint fec_r_fstart; /* FIFO Receive FIfo Start Registers = */ /* FRSR */
+ uint res12[11]; /* reserved 1154*/
+ uint fec_r_des_start;/* beginning of Rx descriptor ring 1180*/ /* ERDSR */
+ uint fec_x_des_start;/* beginning of Tx descriptor ring 1184*/ /* ETDSR */
+ uint fec_r_buff_size;/* Rx buffer size 1188*/ /* EMRBR */
} fec_t;
#endif /* __IMMAP_5282__ */
diff --git a/include/configs/EB+MCF-EV123.h b/include/configs/EB+MCF-EV123.h
index f49a4b7..720b335 100644
--- a/include/configs/EB+MCF-EV123.h
+++ b/include/configs/EB+MCF-EV123.h
@@ -30,7 +30,7 @@
#undef DEBUG
#undef CFG_HALT_BEFOR_RAM_JUMP
#undef ET_DEBUG
-
+
/*
* High Level Configuration Options (easy to change)
*/
@@ -68,7 +68,7 @@
#define CFG_ENV_IS_IN_FLASH 1
#endif
-//#define CONFIG_COMMANDS ( CONFIG_CMD_DFL & ~(CFG_CMD_LOADS | CFG_CMD_LOADB) )
+/*#define CONFIG_COMMANDS ( CONFIG_CMD_DFL & ~(CFG_CMD_LOADS | CFG_CMD_LOADB) ) */
#define CONFIG_COMMANDS ( CONFIG_CMD_DFL & ~(CFG_CMD_LOADB))
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
@@ -95,12 +95,12 @@
#undef CFG_DRAM_TEST
/* Clock and PLL Configuration */
-#define CFG_HZ 10000000
+#define CFG_HZ 10000000
#define CFG_CLK 58982400 /* 9,8304MHz * 6 */
/* PLL Configuration: Ext Clock * 6 (see table 9-4 of MCF user manual) */
-#define CFG_MFD 0x01 /* PLL Multiplication Factor Devider */
+#define CFG_MFD 0x01 /* PLL Multiplication Factor Devider */
#define CFG_RFD 0x00 /* PLL Reduce Frecuency Devider */
/*
@@ -143,7 +143,7 @@
/* If M5282 port is fully implemented the monitor base will be behind
* the vector table. */
#if (TEXT_BASE != CFG_INT_FLASH_BASE)
-#define CFG_MONITOR_BASE (TEXT_BASE + 0x400)
+#define CFG_MONITOR_BASE (TEXT_BASE + 0x400)
#else
#define CFG_MONITOR_BASE (TEXT_BASE + 0x418) /* 24 Byte for CFM-Config */
#endif