* Fix IceCube CLKIN configuration (it's 33.000000MHz)
* Add new configuration for IceCube board with DDR memory
* Update TRAB memory configurations
diff --git a/board/icecube/icecube.c b/board/icecube/icecube.c
index 1b69d13..e0adec3 100644
--- a/board/icecube/icecube.c
+++ b/board/icecube/icecube.c
@@ -68,6 +68,24 @@
{
long hi_addr_bit = hi_addr ? 0x01000000 : 0;
+#ifdef CONFIG_MPC5200_DDR
+ /* unlock mode register */
+ *(vu_long *)MPC5XXX_SDRAM_CTRL = 0xf05f0f00 | hi_addr_bit;
+ /* precharge all banks */
+ *(vu_long *)MPC5XXX_SDRAM_CTRL = 0xf05f0f02 | hi_addr_bit;
+ /* set mode register: extended mode */
+ *(vu_long *)MPC5XXX_SDRAM_MODE = 0x40090000;
+ /* set mode register: reset DLL */
+ *(vu_long *)MPC5XXX_SDRAM_MODE = 0x058d0000;
+ /* precharge all banks */
+ *(vu_long *)MPC5XXX_SDRAM_CTRL = 0xf05f0f02 | hi_addr_bit;
+ /* auto refresh */
+ *(vu_long *)MPC5XXX_SDRAM_CTRL = 0xf05f0f04 | hi_addr_bit;
+ /* set mode register */
+ *(vu_long *)MPC5XXX_SDRAM_MODE = 0x018d0000;
+ /* normal operation */
+ *(vu_long *)MPC5XXX_SDRAM_CTRL = 0x705f0f00 | hi_addr_bit;
+#else
/* unlock mode register */
*(vu_long *)MPC5XXX_SDRAM_CTRL = 0xd04f0000 | hi_addr_bit;
/* precharge all banks */
@@ -86,12 +104,16 @@
*(vu_long *)MPC5XXX_SDRAM_MODE = 0x008d0000;
/* normal operation */
*(vu_long *)MPC5XXX_SDRAM_CTRL = 0x504f0000 | hi_addr_bit;
+#endif
}
#endif
long int initdram (int board_type)
{
ulong dramsize = 0;
+#ifdef CONFIG_MPC5200_DDR
+ ulong dramsize2 = 0;
+#endif
#ifndef CFG_RAMBOOT
ulong test1, test2;
@@ -100,9 +122,18 @@
*(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x0000001e;/* 2G at 0x0 */
*(vu_long *)MPC5XXX_SDRAM_CS1CFG = 0x80000000;/* disabled */
+#ifdef CONFIG_MPC5200_DDR
+ /* setup config registers */
+ *(vu_long *)MPC5XXX_SDRAM_CONFIG1 = 0x73722930;
+ *(vu_long *)MPC5XXX_SDRAM_CONFIG2 = 0x47770000;
+
+ /* set tap delay to 0x10 */
+ *(vu_long *)MPC5XXX_CDM_PORCFG = 0x10000000;
+#else
/* setup config registers */
*(vu_long *)MPC5XXX_SDRAM_CONFIG1 = 0xc2233a00;
*(vu_long *)MPC5XXX_SDRAM_CONFIG2 = 0x88b70004;
+#endif
#elif defined(CONFIG_MGT5100)
*(vu_long *)MPC5XXX_SDRAM_START = 0x00000000;
@@ -129,7 +160,23 @@
#if defined(CONFIG_MPC5200)
*(vu_long *)MPC5XXX_SDRAM_CS0CFG =
(0x13 + __builtin_ffs(dramsize >> 20) - 1);
+#ifdef CONFIG_MPC5200_DDR
+ *(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize + 0x0000001e;/* 2G */
+ sdram_start(0);
+ test1 = dram_size((ulong *)(CFG_SDRAM_BASE + dramsize), 0x80000000);
+ sdram_start(1);
+ test2 = dram_size((ulong *)(CFG_SDRAM_BASE + dramsize), 0x80000000);
+ if (test1 > test2) {
+ sdram_start(0);
+ dramsize2 = test1;
+ } else {
+ dramsize2 = test2;
+ }
+ *(vu_long *)MPC5XXX_SDRAM_CS1CFG =
+ dramsize + (0x13 + __builtin_ffs(dramsize2 >> 20) - 1);
+#else
*(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize; /* disabled */
+#endif
#elif defined(CONFIG_MGT5100)
*(vu_long *)MPC5XXX_SDRAM_STOP = ((dramsize - 1) >> 15);
#endif
@@ -140,8 +187,15 @@
dramsize = ((*(vu_long *)MPC5XXX_SDRAM_STOP + 1) << 15);
#else
dramsize = ((1 << (*(vu_long *)MPC5XXX_SDRAM_CS0CFG - 0x13)) << 20);
+#ifdef CONFIG_MPC5200_DDR
+ dramsize2 = ((1 << (*(vu_long *)MPC5XXX_SDRAM_CS1CFG - 0x13)) << 20);
+#endif
#endif
#endif /* CFG_RAMBOOT */
+
+#ifdef CONFIG_MPC5200_DDR
+ dramsize += dramsize2;
+#endif
/* return total ram size */
return dramsize;
}