board: freescale: various boards: Let env subsystem set gd->env_addr
Various freescale boards set gd->env_addr to default_environment in
board_init(), conditional on CONFIG_ENV_IS_NOWHERE, but this is
redundant, since it is done by env_init() before board_init() is called.
Let the env subsystem handle this.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: Ramon Fried <rfried.dev@gmail.com>
Cc: Priyanka Jain <priyanka.jain@nxp.com>
Cc: Mian Yousaf Kaukab <ykaukab@suse.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
diff --git a/board/freescale/ls1012afrdm/ls1012afrdm.c b/board/freescale/ls1012afrdm/ls1012afrdm.c
index 6473ee0..5dd19cf 100644
--- a/board/freescale/ls1012afrdm/ls1012afrdm.c
+++ b/board/freescale/ls1012afrdm/ls1012afrdm.c
@@ -172,10 +172,6 @@
if (current_el() == 3)
out_le32(&cci->ctrl_ord, CCI400_CTRLORD_EN_BARRIER);
-#ifdef CONFIG_ENV_IS_NOWHERE
- gd->env_addr = (ulong)&default_environment[0];
-#endif
-
#ifdef CONFIG_FSL_CAAM
sec_init();
#endif
diff --git a/board/freescale/ls1012aqds/ls1012aqds.c b/board/freescale/ls1012aqds/ls1012aqds.c
index 6e21040..68578e8 100644
--- a/board/freescale/ls1012aqds/ls1012aqds.c
+++ b/board/freescale/ls1012aqds/ls1012aqds.c
@@ -150,10 +150,6 @@
erratum_a010315();
#endif
-#ifdef CONFIG_ENV_IS_NOWHERE
- gd->env_addr = (ulong)&default_environment[0];
-#endif
-
#ifdef CONFIG_FSL_CAAM
sec_init();
#endif
diff --git a/board/freescale/ls1012ardb/ls1012ardb.c b/board/freescale/ls1012ardb/ls1012ardb.c
index 62e8af4..064fb4d 100644
--- a/board/freescale/ls1012ardb/ls1012ardb.c
+++ b/board/freescale/ls1012ardb/ls1012ardb.c
@@ -173,10 +173,6 @@
erratum_a010315();
#endif
-#ifdef CONFIG_ENV_IS_NOWHERE
- gd->env_addr = (ulong)&default_environment[0];
-#endif
-
#ifdef CONFIG_FSL_CAAM
sec_init();
#endif
diff --git a/board/freescale/ls1028a/ls1028a.c b/board/freescale/ls1028a/ls1028a.c
index 461c571..486a544 100644
--- a/board/freescale/ls1028a/ls1028a.c
+++ b/board/freescale/ls1028a/ls1028a.c
@@ -73,10 +73,6 @@
int board_init(void)
{
-#ifdef CONFIG_ENV_IS_NOWHERE
- gd->env_addr = (ulong)&default_environment[0];
-#endif
-
#ifdef CONFIG_FSL_CAAM
sec_init();
#endif
diff --git a/board/freescale/ls1088a/ls1088a.c b/board/freescale/ls1088a/ls1088a.c
index 2f42263..7046fba 100644
--- a/board/freescale/ls1088a/ls1088a.c
+++ b/board/freescale/ls1088a/ls1088a.c
@@ -810,10 +810,6 @@
select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT, 0);
board_retimer_init();
-#ifdef CONFIG_ENV_IS_NOWHERE
- gd->env_addr = (ulong)&default_environment[0];
-#endif
-
#if defined(CONFIG_TARGET_LS1088ARDB) && defined(CONFIG_FSL_MC_ENET)
/* invert AQR105 IRQ pins polarity */
out_le32(irq_ccsr + IRQCR_OFFSET / 4, AQR105_IRQ_MASK);
diff --git a/board/freescale/ls2080aqds/ls2080aqds.c b/board/freescale/ls2080aqds/ls2080aqds.c
index 62658c4..2f0139e 100644
--- a/board/freescale/ls2080aqds/ls2080aqds.c
+++ b/board/freescale/ls2080aqds/ls2080aqds.c
@@ -211,9 +211,6 @@
FSL_QIXIS_BRDCFG9_QSPI);
#endif
-#ifdef CONFIG_ENV_IS_NOWHERE
- gd->env_addr = (ulong)&default_environment[0];
-#endif
select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT, 0);
#ifdef CONFIG_RTC_ENABLE_32KHZ_OUTPUT
diff --git a/board/freescale/ls2080ardb/ls2080ardb.c b/board/freescale/ls2080ardb/ls2080ardb.c
index 58b8523..bf660a8 100644
--- a/board/freescale/ls2080ardb/ls2080ardb.c
+++ b/board/freescale/ls2080ardb/ls2080ardb.c
@@ -281,9 +281,6 @@
init_final_memctl_regs();
-#ifdef CONFIG_ENV_IS_NOWHERE
- gd->env_addr = (ulong)&default_environment[0];
-#endif
select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT, 0);
#ifdef CONFIG_FSL_QIXIS
diff --git a/board/freescale/lx2160a/lx2160a.c b/board/freescale/lx2160a/lx2160a.c
index e61289d..bd5abb6 100644
--- a/board/freescale/lx2160a/lx2160a.c
+++ b/board/freescale/lx2160a/lx2160a.c
@@ -588,9 +588,6 @@
#if defined(CONFIG_FSL_MC_ENET) && defined(CONFIG_TARGET_LX2160ARDB)
u32 __iomem *irq_ccsr = (u32 __iomem *)ISC_BASE;
#endif
-#ifdef CONFIG_ENV_IS_NOWHERE
- gd->env_addr = (ulong)&default_environment[0];
-#endif
select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT, 0);