arm: dts: r8a774a1: Import DTS queued for Linux 5.12-rc1
Update the RZ/G2M dtsi and r8a774a1-beacon-rzg2m-kit kit
from Renesas repo destined to become 5.12-rc1.
Signed-off-by: Adam Ford <aford173@gmail.com>
diff --git a/arch/arm/dts/beacon-renesom-som.dtsi b/arch/arm/dts/beacon-renesom-som.dtsi
index 6c16a27..9565495 100644
--- a/arch/arm/dts/beacon-renesom-som.dtsi
+++ b/arch/arm/dts/beacon-renesom-som.dtsi
@@ -4,17 +4,18 @@
*/
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clk/versaclock.h>
/ {
memory@48000000 {
device_type = "memory";
/* first 128MB is reserved for secure area. */
- reg = <0x0 0x48000000 0x0 0x78000000>;
+ reg = <0x0 0x48000000 0x0 0xc000000>;
};
- memory@600000000 {
+ memory@57000000 {
device_type = "memory";
- reg = <0x6 0x00000000 0x0 0x80000000>;
+ reg = <0x0 0x57000000 0x0 0x29000000>;
};
osc_32k: osc_32k {
@@ -55,7 +56,8 @@
pinctrl-0 = <&avb_pins>;
pinctrl-names = "default";
phy-handle = <&phy0>;
- phy-mode = "rgmii-id";
+ rx-internal-delay-ps = <1800>;
+ tx-internal-delay-ps = <2000>;
status = "okay";
phy0: ethernet-phy@0 {
@@ -88,7 +90,6 @@
pinctrl-names = "default";
uart-has-rtscts;
status = "okay";
- max-speed = <4000000>;
bluetooth {
compatible = "brcm,bcm43438-bt";
@@ -97,6 +98,7 @@
device-wakeup-gpios = <&pca9654 5 GPIO_ACTIVE_HIGH>;
clocks = <&osc_32k>;
clock-names = "extclk";
+ max-speed = <4000000>;
};
};
@@ -108,7 +110,7 @@
&i2c4 {
status = "okay";
- clock-frequency = <400000>;
+ clock-frequency = <100000>;
pca9654: gpio@20 {
compatible = "onnn,pca9654";
@@ -147,7 +149,7 @@
};
eeprom@50 {
- compatible = "microchip, at24c64", "atmel,24c64";
+ compatible = "microchip,at24c64", "atmel,24c64";
pagesize = <32>;
read-only; /* Manufacturing EEPROM programmed at factory */
reg = <0x50>;
@@ -169,7 +171,32 @@
<&versaclock5 2>,
<&versaclock5 3>,
<&versaclock5 4>;
+
assigned-clock-rates = <33333333>, <33333333>, <50000000>, <125000000>;
+
+ OUT1 {
+ idt,mode = <VC5_CMOS>;
+ idt,voltage-microvolt = <1800000>;
+ idt,slew-percent = <100>;
+ };
+
+ OUT2 {
+ idt,mode = <VC5_CMOS>;
+ idt,voltage-microvolt = <1800000>;
+ idt,slew-percent = <100>;
+ };
+
+ OUT3 {
+ idt,mode = <VC5_CMOS>;
+ idt,voltage-microvolt = <1800000>;
+ idt,slew-percent = <100>;
+ };
+
+ OUT4 {
+ idt,mode = <VC5_CMOS>;
+ idt,voltage-microvolt = <3300000>;
+ idt,slew-percent = <100>;
+ };
};
};
@@ -295,18 +322,14 @@
status = "okay";
};
-&usb_extal_clk {
- clock-frequency = <50000000>;
+&usb2_clksel {
+ status = "okay";
+ clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>,
+ <&versaclock5 3>, <&usb3s0_clk>;
+ clock-names = "ehci_ohci", "hs-usb-if",
+ "usb_extal", "usb_xtal";
};
&usb3s0_clk {
clock-frequency = <100000000>;
};
-
-&vspb {
- status = "okay";
-};
-
-&vspi0 {
- status = "okay";
-};