watchdog: Kconfig: Sort entry alphabetically
To make adding new entry easier, sort Kconfig entries in
alphabetical order.
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Stefan Roese <sr@denx.de>
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index b01dbc4..7a8619f 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -26,6 +26,13 @@
This provides basic infrastructure to support BCM2835/2836 watchdog
hardware, with a max timeout of ~15secs.
+config IMX_WATCHDOG
+ bool "Enable Watchdog Timer support for IMX and LSCH2 of NXP"
+ select HW_WATCHDOG
+ help
+ Select this to enable the IMX and LSCH2 of Layerscape watchdog
+ driver.
+
config OMAP_WATCHDOG
bool "TI OMAP watchdog driver"
depends on ARCH_OMAP2PLUS
@@ -59,14 +66,6 @@
What exactly happens when the timer expires is up to a particular
device/driver.
-config WDT_SANDBOX
- bool "Enable Watchdog Timer support for Sandbox"
- depends on SANDBOX && WDT
- help
- Enable Watchdog Timer support in Sandbox. This is a dummy device that
- can be probed and supports all of the methods of WDT, but does not
- really do anything.
-
config WDT_ARMADA_37XX
bool "Marvell Armada 37xx watchdog timer support"
depends on WDT && ARMADA_3700
@@ -87,6 +86,13 @@
It currently does not support Boot Flash Addressing Mode Detection or
Second Boot.
+config WDT_AT91
+ bool "AT91 watchdog timer support"
+ depends on WDT
+ help
+ Select this to enable Microchip watchdog timer, which can be found on
+ some AT91 devices.
+
config WDT_BCM6345
bool "BCM6345 watchdog timer support"
depends on WDT && (ARCH_BMIPS || ARCH_BCM6858 || ARCH_BCM63158)
@@ -95,6 +101,36 @@
The watchdog timer is stopped when initialized.
It performs full SoC reset.
+config WDT_CDNS
+ bool "Cadence watchdog timer support"
+ depends on WDT
+ imply WATCHDOG
+ help
+ Select this to enable Cadence watchdog timer, which can be found on some
+ Xilinx Microzed Platform.
+
+config WDT_MPC8xx
+ bool "MPC8xx watchdog timer support"
+ depends on WDT && MPC8xx
+ select CONFIG_MPC8xx_WATCHDOG
+ help
+ Select this to enable mpc8xx watchdog timer
+
+config WDT_MT7621
+ bool "MediaTek MT7621 watchdog timer support"
+ depends on WDT && SOC_MT7628
+ help
+ Select this to enable Ralink / Mediatek watchdog timer,
+ which can be found on some MediaTek chips.
+
+config WDT_MTK
+ bool "MediaTek watchdog timer support"
+ depends on WDT && ARCH_MEDIATEK
+ help
+ Select this to enable watchdog timer for MediaTek SoCs.
+ The watchdog timer is stopped when initialized.
+ It performs full SoC reset.
+
config WDT_ORION
bool "Orion watchdog timer support"
depends on WDT
@@ -103,6 +139,14 @@
Select this to enable Orion watchdog timer, which can be found on some
Marvell Armada chips.
+config WDT_SANDBOX
+ bool "Enable Watchdog Timer support for Sandbox"
+ depends on SANDBOX && WDT
+ help
+ Enable Watchdog Timer support in Sandbox. This is a dummy device that
+ can be probed and supports all of the methods of WDT, but does not
+ really do anything.
+
config WDT_SP805
bool "SP805 watchdog timer support"
depends on WDT
@@ -110,22 +154,6 @@
Select this to enable SP805 watchdog timer, which can be found on some
nxp layerscape chips.
-config WDT_CDNS
- bool "Cadence watchdog timer support"
- depends on WDT
- imply WATCHDOG
- help
- Select this to enable Cadence watchdog timer, which can be found on some
- Xilinx Microzed Platform.
-
-config WDT_MTK
- bool "MediaTek watchdog timer support"
- depends on WDT && ARCH_MEDIATEK
- help
- Select this to enable watchdog timer for MediaTek SoCs.
- The watchdog timer is stopped when initialized.
- It performs full SoC reset.
-
config XILINX_TB_WATCHDOG
bool "Xilinx Axi watchdog timer support"
depends on WDT
@@ -134,31 +162,4 @@
Select this to enable Xilinx Axi watchdog timer, which can be found on some
Xilinx Microblaze Platforms.
-config IMX_WATCHDOG
- bool "Enable Watchdog Timer support for IMX and LSCH2 of NXP"
- select HW_WATCHDOG
- help
- Select this to enable the IMX and LSCH2 of Layerscape watchdog
- driver.
-
-config WDT_AT91
- bool "AT91 watchdog timer support"
- depends on WDT
- help
- Select this to enable Microchip watchdog timer, which can be found on
- some AT91 devices.
-
-config WDT_MT7621
- bool "MediaTek MT7621 watchdog timer support"
- depends on WDT && SOC_MT7628
- help
- Select this to enable Ralink / Mediatek watchdog timer,
- which can be found on some MediaTek chips.
-
-config WDT_MPC8xx
- bool "MPC8xx watchdog timer support"
- depends on WDT && MPC8xx
- help
- Select this to enable mpc8xx watchdog timer
-
endmenu