ARM: mx6: ddr: Configure all SDQS pullups using loop
Instead of explicitly setting up each SDQS register, use a loop.
No functional change.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Eric Nelson <eric@nelint.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Reviewed-by: Eric Nelson <eric@nelint.com>
diff --git a/arch/arm/mach-imx/mx6/ddr.c b/arch/arm/mach-imx/mx6/ddr.c
index e917b04..b2402f7 100644
--- a/arch/arm/mach-imx/mx6/ddr.c
+++ b/arch/arm/mach-imx/mx6/ddr.c
@@ -249,25 +249,14 @@
{
struct mx6dq_iomux_ddr_regs *mx6_ddr_iomux =
(struct mx6dq_iomux_ddr_regs *)MX6DQ_IOM_DDR_BASE;
+ u32 sdqs = (u32)(&mx6_ddr_iomux->dram_sdqs0);
+ int i;
- if (set) {
- setbits_le32(&mx6_ddr_iomux->dram_sdqs0, 0x7000);
- setbits_le32(&mx6_ddr_iomux->dram_sdqs1, 0x7000);
- setbits_le32(&mx6_ddr_iomux->dram_sdqs2, 0x7000);
- setbits_le32(&mx6_ddr_iomux->dram_sdqs3, 0x7000);
- setbits_le32(&mx6_ddr_iomux->dram_sdqs4, 0x7000);
- setbits_le32(&mx6_ddr_iomux->dram_sdqs5, 0x7000);
- setbits_le32(&mx6_ddr_iomux->dram_sdqs6, 0x7000);
- setbits_le32(&mx6_ddr_iomux->dram_sdqs7, 0x7000);
- } else {
- clrbits_le32(&mx6_ddr_iomux->dram_sdqs0, 0x7000);
- clrbits_le32(&mx6_ddr_iomux->dram_sdqs1, 0x7000);
- clrbits_le32(&mx6_ddr_iomux->dram_sdqs2, 0x7000);
- clrbits_le32(&mx6_ddr_iomux->dram_sdqs3, 0x7000);
- clrbits_le32(&mx6_ddr_iomux->dram_sdqs4, 0x7000);
- clrbits_le32(&mx6_ddr_iomux->dram_sdqs5, 0x7000);
- clrbits_le32(&mx6_ddr_iomux->dram_sdqs6, 0x7000);
- clrbits_le32(&mx6_ddr_iomux->dram_sdqs7, 0x7000);
+ for (i = 0; i < 8; i++) {
+ if (set)
+ setbits_le32(sdqs + (4 * i), 0x7000);
+ else
+ clrbits_le32(sdqs + (4 * i), 0x7000);
}
}