armv8: SECURE_BOOT: Enable chain of trust on LS1046A platform
Define bootscript and its header addresses for QSPI target. Also
define PPA header address to enable PPA validation.
Signed-off-by: Vinitha Pillai <vinitha.pillai@nxp.com>
Signed-off-by: Sumit Garg <sumit.garg@nxp.com>
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
index d587ed3..f19c1be 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
+++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
@@ -176,6 +176,7 @@
hex "hdr address of PPA firmware loading from"
depends on FSL_LS_PPA && CHAIN_OF_TRUST
default 0x600c0000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1043A
+ default 0x40740000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1046A
default 0x580c40000 if SYS_LS_PPA_FW_IN_XIP && FSL_LSCH3
help
If the PPA header firmware locate at XIP flash, such as NOR or
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/config.h b/arch/arm/include/asm/arch-fsl-layerscape/config.h
index b5b08aa..1f22afd 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/config.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/config.h
@@ -199,7 +199,7 @@
#define CONFIG_SYS_FSL_IFC_BE
#define CONFIG_SYS_FSL_SFP_VER_3_2
-#define CONFIG_SYS_FSL_SNVS_LE
+#define CONFIG_SYS_FSL_SEC_MON_BE
#define CONFIG_SYS_FSL_SFP_BE
#define CONFIG_SYS_FSL_SRK_LE
#define CONFIG_KEY_REVOCATION
diff --git a/arch/arm/include/asm/fsl_secure_boot.h b/arch/arm/include/asm/fsl_secure_boot.h
index 4c36f9dc..cbf92fb 100644
--- a/arch/arm/include/asm/fsl_secure_boot.h
+++ b/arch/arm/include/asm/fsl_secure_boot.h
@@ -46,9 +46,10 @@
#endif
-#if defined(CONFIG_LS1043A) || defined(CONFIG_LS2080A)
-/* For LS1043 (ARMv8), ESBC image Address in Header is 64 bit
- * Similiarly for LS2080
+#if defined(CONFIG_FSL_LAYERSCAPE)
+/*
+ * For fsl layerscape based platforms, ESBC image Address in Header
+ * is 64 bit.
*/
#define CONFIG_ESBC_ADDR_64BIT
#endif
@@ -90,12 +91,21 @@
#define CONFIG_BS_ADDR_DEVICE 0x00000940
#define CONFIG_BS_HDR_SIZE 0x00000010
#define CONFIG_BS_SIZE 0x00000008
+#elif defined(CONFIG_QSPI_BOOT)
+#ifdef CONFIG_ARCH_LS1046A
+#define CONFIG_BS_HDR_ADDR_DEVICE 0x40780000
+#define CONFIG_BS_ADDR_DEVICE 0x40800000
#else
+#error "Platform not supported"
+#endif
+#define CONFIG_BS_HDR_SIZE 0x00002000
+#define CONFIG_BS_SIZE 0x00001000
+#else /* Default NOR Boot */
#define CONFIG_BS_HDR_ADDR_DEVICE 0x600a0000
#define CONFIG_BS_ADDR_DEVICE 0x60060000
#define CONFIG_BS_HDR_SIZE 0x00002000
#define CONFIG_BS_SIZE 0x00001000
-#endif /* #ifdef CONFIG_SD_BOOT */
+#endif
#define CONFIG_BS_HDR_ADDR_RAM 0x81000000
#define CONFIG_BS_ADDR_RAM 0x81020000
#endif