ARM: dts: am574x-idk: Add initial support
Add initial dts support for am574x-idk
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
diff --git a/arch/arm/dts/am572x-idk.dts b/arch/arm/dts/am572x-idk.dts
index a578fe9..9212931 100644
--- a/arch/arm/dts/am572x-idk.dts
+++ b/arch/arm/dts/am572x-idk.dts
@@ -9,8 +9,7 @@
/dts-v1/;
#include "dra74x.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
+#include "am572x-idk-common.dtsi"
#include "am57xx-idk-common.dtsi"
#include "dra74x-mmc-iodelay.dtsi"
@@ -18,54 +17,6 @@
model = "TI AM5728 IDK";
compatible = "ti,am5728-idk", "ti,am5728", "ti,dra742", "ti,dra74",
"ti,dra7";
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x80000000 0x0 0x80000000>;
- };
-
- status-leds {
- compatible = "gpio-leds";
- cpu0-led {
- label = "status0:red:cpu0";
- gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>;
- default-state = "off";
- linux,default-trigger = "cpu0";
- };
-
- usr0-led {
- label = "status0:green:usr";
- gpios = <&gpio3 11 GPIO_ACTIVE_HIGH>;
- default-state = "off";
- };
-
- heartbeat-led {
- label = "status0:blue:heartbeat";
- gpios = <&gpio3 12 GPIO_ACTIVE_HIGH>;
- default-state = "off";
- linux,default-trigger = "heartbeat";
- };
-
- cpu1-led {
- label = "status1:red:cpu1";
- gpios = <&gpio3 10 GPIO_ACTIVE_HIGH>;
- default-state = "off";
- linux,default-trigger = "cpu1";
- };
-
- usr1-led {
- label = "status1:green:usr";
- gpios = <&gpio7 23 GPIO_ACTIVE_HIGH>;
- default-state = "off";
- };
-
- mmc0-led {
- label = "status1:blue:mmc0";
- gpios = <&gpio7 22 GPIO_ACTIVE_HIGH>;
- default-state = "off";
- linux,default-trigger = "mmc0";
- };
- };
};
&mmc1 {
@@ -85,45 +36,3 @@
pinctrl-1 = <&mmc2_pins_hs>;
pinctrl-2 = <&mmc2_pins_ddr_rev20>;
};
-
-&omap_dwc3_2 {
- extcon = <&extcon_usb2>;
-};
-
-&extcon_usb2 {
- id-gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>;
- vbus-gpio = <&gpio3 26 GPIO_ACTIVE_HIGH>;
-};
-
-&sn65hvs882 {
- load-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
-};
-
-&pcie1_rc {
- status = "okay";
- gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
-};
-
-&pcie1_ep {
- gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
-};
-
-&mailbox5 {
- status = "okay";
- mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
- status = "okay";
- };
- mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
- status = "okay";
- };
-};
-
-&mailbox6 {
- status = "okay";
- mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
- status = "okay";
- };
- mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
- status = "okay";
- };
-};