phy: qcom: Import QMP phy related header files from Linux
Import Qualcomm QMP phy related header files from Linux v6.11-rc7,
limit to headers needed to setup QMP v2 to v6 UFS PHYs.
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
diff --git a/drivers/phy/qcom/phy-qcom-qmp-qserdes-txrx.h b/drivers/phy/qcom/phy-qcom-qmp-qserdes-txrx.h
new file mode 100644
index 0000000..d206945
--- /dev/null
+++ b/drivers/phy/qcom/phy-qcom-qmp-qserdes-txrx.h
@@ -0,0 +1,205 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2017, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef QCOM_PHY_QMP_QSERDES_TXRX_H_
+#define QCOM_PHY_QMP_QSERDES_TXRX_H_
+
+/* Only for QMP V2 PHY - TX registers */
+#define QSERDES_TX_BIST_MODE_LANENO 0x000
+#define QSERDES_TX_BIST_INVERT 0x004
+#define QSERDES_TX_CLKBUF_ENABLE 0x008
+#define QSERDES_TX_CMN_CONTROL_ONE 0x00c
+#define QSERDES_TX_CMN_CONTROL_TWO 0x010
+#define QSERDES_TX_CMN_CONTROL_THREE 0x014
+#define QSERDES_TX_TX_EMP_POST1_LVL 0x018
+#define QSERDES_TX_TX_POST2_EMPH 0x01c
+#define QSERDES_TX_TX_BOOST_LVL_UP_DN 0x020
+#define QSERDES_TX_HP_PD_ENABLES 0x024
+#define QSERDES_TX_TX_IDLE_LVL_LARGE_AMP 0x028
+#define QSERDES_TX_TX_DRV_LVL 0x02c
+#define QSERDES_TX_TX_DRV_LVL_OFFSET 0x030
+#define QSERDES_TX_RESET_TSYNC_EN 0x034
+#define QSERDES_TX_PRE_STALL_LDO_BOOST_EN 0x038
+#define QSERDES_TX_TX_BAND 0x03c
+#define QSERDES_TX_SLEW_CNTL 0x040
+#define QSERDES_TX_INTERFACE_SELECT 0x044
+#define QSERDES_TX_LPB_EN 0x048
+#define QSERDES_TX_RES_CODE_LANE_TX 0x04c
+#define QSERDES_TX_RES_CODE_LANE_RX 0x050
+#define QSERDES_TX_RES_CODE_LANE_OFFSET 0x054
+#define QSERDES_TX_PERL_LENGTH1 0x058
+#define QSERDES_TX_PERL_LENGTH2 0x05c
+#define QSERDES_TX_SERDES_BYP_EN_OUT 0x060
+#define QSERDES_TX_DEBUG_BUS_SEL 0x064
+#define QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN 0x068
+#define QSERDES_TX_TX_POL_INV 0x06c
+#define QSERDES_TX_PARRATE_REC_DETECT_IDLE_EN 0x070
+#define QSERDES_TX_BIST_PATTERN1 0x074
+#define QSERDES_TX_BIST_PATTERN2 0x078
+#define QSERDES_TX_BIST_PATTERN3 0x07c
+#define QSERDES_TX_BIST_PATTERN4 0x080
+#define QSERDES_TX_BIST_PATTERN5 0x084
+#define QSERDES_TX_BIST_PATTERN6 0x088
+#define QSERDES_TX_BIST_PATTERN7 0x08c
+#define QSERDES_TX_BIST_PATTERN8 0x090
+#define QSERDES_TX_LANE_MODE 0x094
+#define QSERDES_TX_IDAC_CAL_LANE_MODE 0x098
+#define QSERDES_TX_IDAC_CAL_LANE_MODE_CONFIGURATION 0x09c
+#define QSERDES_TX_ATB_SEL1 0x0a0
+#define QSERDES_TX_ATB_SEL2 0x0a4
+#define QSERDES_TX_RCV_DETECT_LVL 0x0a8
+#define QSERDES_TX_RCV_DETECT_LVL_2 0x0ac
+#define QSERDES_TX_PRBS_SEED1 0x0b0
+#define QSERDES_TX_PRBS_SEED2 0x0b4
+#define QSERDES_TX_PRBS_SEED3 0x0b8
+#define QSERDES_TX_PRBS_SEED4 0x0bc
+#define QSERDES_TX_RESET_GEN 0x0c0
+#define QSERDES_TX_RESET_GEN_MUXES 0x0c4
+#define QSERDES_TX_TRAN_DRVR_EMP_EN 0x0c8
+#define QSERDES_TX_TX_INTERFACE_MODE 0x0cc
+#define QSERDES_TX_PWM_CTRL 0x0d0
+#define QSERDES_TX_PWM_ENCODED_OR_DATA 0x0d4
+#define QSERDES_TX_PWM_GEAR_1_DIVIDER_BAND2 0x0d8
+#define QSERDES_TX_PWM_GEAR_2_DIVIDER_BAND2 0x0dc
+#define QSERDES_TX_PWM_GEAR_3_DIVIDER_BAND2 0x0e0
+#define QSERDES_TX_PWM_GEAR_4_DIVIDER_BAND2 0x0e4
+#define QSERDES_TX_PWM_GEAR_1_DIVIDER_BAND0_1 0x0e8
+#define QSERDES_TX_PWM_GEAR_2_DIVIDER_BAND0_1 0x0ec
+#define QSERDES_TX_PWM_GEAR_3_DIVIDER_BAND0_1 0x0f0
+#define QSERDES_TX_PWM_GEAR_4_DIVIDER_BAND0_1 0x0f4
+#define QSERDES_TX_VMODE_CTRL1 0x0f8
+#define QSERDES_TX_VMODE_CTRL2 0x0fc
+#define QSERDES_TX_TX_ALOG_INTF_OBSV_CNTL 0x100
+#define QSERDES_TX_BIST_STATUS 0x104
+#define QSERDES_TX_BIST_ERROR_COUNT1 0x108
+#define QSERDES_TX_BIST_ERROR_COUNT2 0x10c
+#define QSERDES_TX_TX_ALOG_INTF_OBSV 0x110
+
+/* Only for QMP V2 PHY - RX registers */
+#define QSERDES_RX_UCDR_FO_GAIN_HALF 0x000
+#define QSERDES_RX_UCDR_FO_GAIN_QUARTER 0x004
+#define QSERDES_RX_UCDR_FO_GAIN_EIGHTH 0x008
+#define QSERDES_RX_UCDR_FO_GAIN 0x00c
+#define QSERDES_RX_UCDR_SO_GAIN_HALF 0x010
+#define QSERDES_RX_UCDR_SO_GAIN_QUARTER 0x014
+#define QSERDES_RX_UCDR_SO_GAIN_EIGHTH 0x018
+#define QSERDES_RX_UCDR_SO_GAIN 0x01c
+#define QSERDES_RX_UCDR_SVS_FO_GAIN_HALF 0x020
+#define QSERDES_RX_UCDR_SVS_FO_GAIN_QUARTER 0x024
+#define QSERDES_RX_UCDR_SVS_FO_GAIN_EIGHTH 0x028
+#define QSERDES_RX_UCDR_SVS_FO_GAIN 0x02c
+#define QSERDES_RX_UCDR_SVS_SO_GAIN_HALF 0x030
+#define QSERDES_RX_UCDR_SVS_SO_GAIN_QUARTER 0x034
+#define QSERDES_RX_UCDR_SVS_SO_GAIN_EIGHTH 0x038
+#define QSERDES_RX_UCDR_SVS_SO_GAIN 0x03c
+#define QSERDES_RX_UCDR_FASTLOCK_FO_GAIN 0x040
+#define QSERDES_RX_UCDR_FD_GAIN 0x044
+#define QSERDES_RX_UCDR_SO_SATURATION_AND_ENABLE 0x048
+#define QSERDES_RX_UCDR_FO_TO_SO_DELAY 0x04c
+#define QSERDES_RX_UCDR_FASTLOCK_COUNT_LOW 0x050
+#define QSERDES_RX_UCDR_FASTLOCK_COUNT_HIGH 0x054
+#define QSERDES_RX_UCDR_MODULATE 0x058
+#define QSERDES_RX_UCDR_PI_CONTROLS 0x05c
+#define QSERDES_RX_RBIST_CONTROL 0x060
+#define QSERDES_RX_AUX_CONTROL 0x064
+#define QSERDES_RX_AUX_DATA_TCOARSE 0x068
+#define QSERDES_RX_AUX_DATA_TFINE_LSB 0x06c
+#define QSERDES_RX_AUX_DATA_TFINE_MSB 0x070
+#define QSERDES_RX_RCLK_AUXDATA_SEL 0x074
+#define QSERDES_RX_AC_JTAG_ENABLE 0x078
+#define QSERDES_RX_AC_JTAG_INITP 0x07c
+#define QSERDES_RX_AC_JTAG_INITN 0x080
+#define QSERDES_RX_AC_JTAG_LVL 0x084
+#define QSERDES_RX_AC_JTAG_MODE 0x088
+#define QSERDES_RX_AC_JTAG_RESET 0x08c
+#define QSERDES_RX_RX_TERM_BW 0x090
+#define QSERDES_RX_RX_RCVR_IQ_EN 0x094
+#define QSERDES_RX_RX_IDAC_I_DC_OFFSETS 0x098
+#define QSERDES_RX_RX_IDAC_IBAR_DC_OFFSETS 0x09c
+#define QSERDES_RX_RX_IDAC_Q_DC_OFFSETS 0x0a0
+#define QSERDES_RX_RX_IDAC_QBAR_DC_OFFSETS 0x0a4
+#define QSERDES_RX_RX_IDAC_A_DC_OFFSETS 0x0a8
+#define QSERDES_RX_RX_IDAC_ABAR_DC_OFFSETS 0x0ac
+#define QSERDES_RX_RX_IDAC_EN 0x0b0
+#define QSERDES_RX_RX_IDAC_ENABLES 0x0b4
+#define QSERDES_RX_RX_IDAC_SIGN 0x0b8
+#define QSERDES_RX_RX_HIGHZ_HIGHRATE 0x0bc
+#define QSERDES_RX_RX_TERM_AC_BYPASS_DC_COUPLE_OFFSET 0x0c0
+#define QSERDES_RX_RX_EQ_GAIN1_LSB 0x0c4
+#define QSERDES_RX_RX_EQ_GAIN1_MSB 0x0c8
+#define QSERDES_RX_RX_EQ_GAIN2_LSB 0x0cc
+#define QSERDES_RX_RX_EQ_GAIN2_MSB 0x0d0
+#define QSERDES_RX_RX_EQU_ADAPTOR_CNTRL1 0x0d4
+#define QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2 0x0d8
+#define QSERDES_RX_RX_EQU_ADAPTOR_CNTRL3 0x0dc
+#define QSERDES_RX_RX_EQU_ADAPTOR_CNTRL4 0x0e0
+#define QSERDES_RX_RX_IDAC_CAL_CONFIGURATION 0x0e4
+#define QSERDES_RX_RX_IDAC_TSETTLE_LOW 0x0e8
+#define QSERDES_RX_RX_IDAC_TSETTLE_HIGH 0x0ec
+#define QSERDES_RX_RX_IDAC_ENDSAMP_LOW 0x0f0
+#define QSERDES_RX_RX_IDAC_ENDSAMP_HIGH 0x0f4
+#define QSERDES_RX_RX_IDAC_MIDPOINT_LOW 0x0f8
+#define QSERDES_RX_RX_IDAC_MIDPOINT_HIGH 0x0fc
+#define QSERDES_RX_RX_EQ_OFFSET_LSB 0x100
+#define QSERDES_RX_RX_EQ_OFFSET_MSB 0x104
+#define QSERDES_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1 0x108
+#define QSERDES_RX_RX_OFFSET_ADAPTOR_CNTRL2 0x10c
+#define QSERDES_RX_SIGDET_ENABLES 0x110
+#define QSERDES_RX_SIGDET_CNTRL 0x114
+#define QSERDES_RX_SIGDET_LVL 0x118
+#define QSERDES_RX_SIGDET_DEGLITCH_CNTRL 0x11c
+#define QSERDES_RX_RX_BAND 0x120
+#define QSERDES_RX_CDR_FREEZE_UP_DN 0x124
+#define QSERDES_RX_CDR_RESET_OVERRIDE 0x128
+#define QSERDES_RX_RX_INTERFACE_MODE 0x12c
+#define QSERDES_RX_JITTER_GEN_MODE 0x130
+#define QSERDES_RX_BUJ_AMP 0x134
+#define QSERDES_RX_SJ_AMP1 0x138
+#define QSERDES_RX_SJ_AMP2 0x13c
+#define QSERDES_RX_SJ_PER1 0x140
+#define QSERDES_RX_SJ_PER2 0x144
+#define QSERDES_RX_BUJ_STEP_FREQ1 0x148
+#define QSERDES_RX_BUJ_STEP_FREQ2 0x14c
+#define QSERDES_RX_PPM_OFFSET1 0x150
+#define QSERDES_RX_PPM_OFFSET2 0x154
+#define QSERDES_RX_SIGN_PPM_PERIOD1 0x158
+#define QSERDES_RX_SIGN_PPM_PERIOD2 0x15c
+#define QSERDES_RX_SSC_CTRL 0x160
+#define QSERDES_RX_SSC_COUNT1 0x164
+#define QSERDES_RX_SSC_COUNT2 0x168
+#define QSERDES_RX_RX_ALOG_INTF_OBSV_CNTL 0x16c
+#define QSERDES_RX_RX_PWM_ENABLE_AND_DATA 0x170
+#define QSERDES_RX_RX_PWM_GEAR1_TIMEOUT_COUNT 0x174
+#define QSERDES_RX_RX_PWM_GEAR2_TIMEOUT_COUNT 0x178
+#define QSERDES_RX_RX_PWM_GEAR3_TIMEOUT_COUNT 0x17c
+#define QSERDES_RX_RX_PWM_GEAR4_TIMEOUT_COUNT 0x180
+#define QSERDES_RX_PI_CTRL1 0x184
+#define QSERDES_RX_PI_CTRL2 0x188
+#define QSERDES_RX_PI_QUAD 0x18c
+#define QSERDES_RX_IDATA1 0x190
+#define QSERDES_RX_IDATA2 0x194
+#define QSERDES_RX_AUX_DATA1 0x198
+#define QSERDES_RX_AUX_DATA2 0x19c
+#define QSERDES_RX_AC_JTAG_OUTP 0x1a0
+#define QSERDES_RX_AC_JTAG_OUTN 0x1a4
+#define QSERDES_RX_RX_SIGDET 0x1a8
+#define QSERDES_RX_RX_VDCOFF 0x1ac
+#define QSERDES_RX_IDAC_CAL_ON 0x1b0
+#define QSERDES_RX_IDAC_STATUS_I 0x1b4
+#define QSERDES_RX_IDAC_STATUS_IBAR 0x1b8
+#define QSERDES_RX_IDAC_STATUS_Q 0x1bc
+#define QSERDES_RX_IDAC_STATUS_QBAR 0x1c0
+#define QSERDES_RX_IDAC_STATUS_A 0x1c4
+#define QSERDES_RX_IDAC_STATUS_ABAR 0x1c8
+#define QSERDES_RX_CALST_STATUS_I 0x1cc
+#define QSERDES_RX_CALST_STATUS_Q 0x1d0
+#define QSERDES_RX_CALST_STATUS_A 0x1d4
+#define QSERDES_RX_RX_ALOG_INTF_OBSV 0x1d8
+#define QSERDES_RX_READ_EQCODE 0x1dc
+#define QSERDES_RX_READ_OFFSETCODE 0x1e0
+#define QSERDES_RX_IA_ERROR_COUNTER_LOW 0x1e4
+#define QSERDES_RX_IA_ERROR_COUNTER_HIGH 0x1e8
+
+#endif