fsl-ddr: use the 1T timing as default configuration
For light loaded system, we use the 1T timing to gain better
memory performance, but for some heavily loaded system,
you have to add the 2T timing options to board files.
Signed-off-by: Dave Liu <daveliu@freescale.com>
Acked-by: Andy Fleming <afleming@freescale.com>
diff --git a/board/freescale/mpc8544ds/ddr.c b/board/freescale/mpc8544ds/ddr.c
index 34f84a2..b8330eb 100644
--- a/board/freescale/mpc8544ds/ddr.c
+++ b/board/freescale/mpc8544ds/ddr.c
@@ -75,6 +75,9 @@
*/
popts->write_data_delay = 3;
+ /* 2T timing enable */
+ popts->twoT_en = 1;
+
/*
* Factors to consider for half-strength driver enable:
* - number of DIMMs installed