Prepare v2008.10 release: update CHANGELOG & Makefile
Signed-off-by: Wolfgang Denk <wd@denx.de>
diff --git a/CHANGELOG b/CHANGELOG
index e7dad9c..8209741 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -1,3 +1,119 @@
+commit f7a35a60cf45491871a5c28e9ad24db005487857
+Author: Heiko Schocher <hs@denx.de>
+Date: Fri Oct 17 18:24:06 2008 +0200
+
+ mgcoge: add redundant environment sector
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit c2537ee85954af9d036b18b644f3e18d837bf4a5
+Author: Heiko Schocher <hs@denx.de>
+Date: Fri Oct 17 18:23:27 2008 +0200
+
+ mgsuvd: update size of environment
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit fa7b1c07e9371aea8f87ee6d3c2ea5564bd8cc8d
+Author: Lepcha Suchit <Suchit.Lepcha@freescale.com>
+Date: Thu Oct 16 13:38:00 2008 -0500
+
+ 83xx NAND boot: wait for LTESR[CC]
+
+ At least some revisions of the 8313, and possibly other chips, do not
+ wait for all pages of the initial 4K NAND region to be loaded before
+ beginning execution; thus, we wait for it before branching out of the
+ first NAND page.
+
+ This fixes warm reset problems when booting from NAND on 8313erdb.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+ Acked-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit bf29e0ea0af03d593c64614136acc723a7a022a2
+Author: Yuri Tikhonov <yur@emcraft.com>
+Date: Fri Oct 17 12:54:18 2008 +0200
+
+ ppc4xx: PPC44x MQ initialization
+
+ Set the MQ Read Passing & MCIF Cycle limits to the recommended by AMCC
+ values. This fixes the occasional 440SPe hard locking issues when the 440SPe's
+ dedicated DMA engines are used (e.g. by the h/w accelerated RAID driver).
+
+ Previously the appropriate initialization had been made in Linux, by the
+ ppc440spe ADMA driver, which is wrong because modifying the MQ configuration
+ registers after normal operation has begun is not supported and could
+ have unpredictable results.
+
+ Comment from Stefan: This patch doesn't change the resulting value of the
+ MQ registers. It explicitly sets/clears all bits to the desired state which
+ better documents the resulting register value instead of relying on pre-set
+ default values.
+
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit f7d190b1c0b3ab7fc53074ad2862f7de99de37ff
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Oct 16 21:58:50 2008 -0500
+
+ 85xx: Using proper I2C source clock divider for MPC8544
+
+ The MPC8544 RM incorrect shows the SEC_CFG bit in PORDEVSR2 as being
+ bit 26, instead it should be bit 28. This caused in incorrect
+ interpretation of the i2c_clk which is the same as the SEC clk on
+ MPC8544. The SEC clk is controlled by cfg_sec_freq that is reported
+ in PORDEVSR2.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 42653b826adb319a1df06e24ef26096b2a5d9d2a
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Oct 16 21:58:49 2008 -0500
+
+ Revert "85xx: Using proper I2C source clock divider for MPC8544"
+
+ This reverts commit dffd2446fb041f38ef034b0fcf41e51e5e489159.
+
+ The fix introduced by this patch is not correct. The problem is
+ that the documentation is not correct for the MPC8544 with regards
+ to which bit in PORDEVSR2 is for the SEC_CFG.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 2179c4766bffeece98e5e92040629a96c97e230c
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Oct 15 10:19:41 2008 -0500
+
+ 85xx: Fix compile warning
+
+ mpc8536ds.c: In function 'is_sata_supported':
+ mpc8536ds.c:614: warning: unused variable 'devdisr'
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 9029b68f3f81b3013044f167ea025e836e6c8c0e
+Author: Jason Jin <Jason.jin@freescale.com>
+Date: Wed Oct 15 10:40:24 2008 +0800
+
+ Fix the function conflict in x86emu when DEBUG is on
+
+ The function parse_line() in common/main.c was exposed globally by commit
+ 6636b62a6efc7f14e6e788788631ae7a7fca4537, Result in conflict with the same
+ name funciton in drivers/bios_emulator/x86emu/debug.c when define the DEBUG.
+ This patch fix this by renaming the function in the debug.c file.
+
+ Signed-off-by: Jason Jin <Jason.jin@freescale.com>
+
+commit b4dbacf69a669a17487054552fc2761149dd6767
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Oct 15 15:50:45 2008 +0200
+
+ Coding Style cleanup, update CHANGELOG, prepare 2008.10-rc3
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
commit 374b9038293d01d8744a46af9b7854a6fd99b228
Author: Heiko Schocher <hs@denx.de>
Date: Wed Oct 15 09:51:19 2008 +0200