mx7ulp: add getting a board serial number
Get Unique ID of SoC iMX7ULP, using the logic described in Fusemap
(IMX7ULPRMB2_Rev0_Fusemap) attached in the i.MX 7ULP APRM [1].
[1]
https://www.nxp.com/docs/en/reference-manual/IMX7ULPRMB2.pdf
Signed-off-by: Ricardo Salveti <ricardo@foundries.io>
Co-developed-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io>
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
diff --git a/arch/arm/mach-imx/mx7ulp/soc.c b/arch/arm/mach-imx/mx7ulp/soc.c
index 7f097d6..c90ce22 100644
--- a/arch/arm/mach-imx/mx7ulp/soc.c
+++ b/arch/arm/mach-imx/mx7ulp/soc.c
@@ -13,6 +13,7 @@
#include <asm/arch/sys_proto.h>
#include <asm/mach-imx/boot_mode.h>
#include <asm/mach-imx/hab.h>
+#include <asm/setup.h>
#include <linux/bitops.h>
#define PMC0_BASE_ADDR 0x410a1000
@@ -380,3 +381,25 @@
return boot_dev;
}
+
+#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
+/*
+ * OCOTP_CFG (SJC CHALLENGE, Unique ID)
+ * i.MX 7ULP Applications Processor Reference Manual, Rev. 0, 09/2020
+ *
+ * OCOTP_CFG0 offset 0x4B0: 15:0 -> 15:0 bits of Unique ID
+ * OCOTP_CFG1 offset 0x4C0: 15:0 -> 31:16 bits of Unique ID
+ * OCOTP_CFG2 offset 0x4D0: 15:0 -> 47:32 bits of Unique ID
+ * OCOTP_CFG3 offset 0x4E0: 15:0 -> 63:48 bits of Unique ID
+ */
+void get_board_serial(struct tag_serialnr *serialnr)
+{
+ struct ocotp_regs *ocotp = (struct ocotp_regs *)OCOTP_BASE_ADDR;
+ struct fuse_bank *bank = &ocotp->bank[1];
+ struct fuse_bank1_regs *fuse =
+ (struct fuse_bank1_regs *)bank->fuse_regs;
+
+ serialnr->low = (fuse->cfg0 & 0xFFFF) + ((fuse->cfg1 & 0xFFFF) << 16);
+ serialnr->high = (fuse->cfg2 & 0xFFFF) + ((fuse->cfg3 & 0xFFFF) << 16);
+}
+#endif /* CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG */