ARM: tegra: Add support for TK1-SOM board from Colorado Engineering
The Colorado TK1 SOM is a small form factor board similar to the
Jetson TK1. The main differences lie in the pinmux, and in that the
PCIe controller is set to use in 4lanes+1lane, rather than 2+2.
The pinmux header here was generated from a spreadsheet provided by
Colorado Engineering using the tegra-pinmux scripts. The spreadsheet
was converted from v09 to v11 by me.
Signed-off-by: Peter Chubb <peter.chubb@data61.csiro.au>
Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
diff --git a/include/configs/cei-tk1-som.h b/include/configs/cei-tk1-som.h
new file mode 100644
index 0000000..74fc377
--- /dev/null
+++ b/include/configs/cei-tk1-som.h
@@ -0,0 +1,73 @@
+/*
+ * (c) Copyright 2016, Data61
+ * Commonwealth Scientific and Industrial Research Organisation (CSIRO)
+ *
+ * Based on jetson-tk1.h which is:
+ * (C) Copyright 2013-2014
+ * NVIDIA Corporation <www.nvidia.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <linux/sizes.h>
+
+/* enable PMIC */
+#define CONFIG_AS3722_POWER
+
+#include "tegra124-common.h"
+
+/* High-level configuration options */
+#define CONFIG_TEGRA_BOARD_STRING "CEI tk1-som"
+
+/* Board-specific serial config */
+#define CONFIG_TEGRA_ENABLE_UARTD
+#define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE
+
+/* I2C */
+#define CONFIG_SYS_I2C_TEGRA
+
+/* SD/MMC */
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_TEGRA_MMC
+
+/* Environment in eMMC, at the end of 2nd "boot sector" */
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_ENV_OFFSET (-CONFIG_ENV_SIZE)
+#define CONFIG_SYS_MMC_ENV_DEV 0
+#define CONFIG_SYS_MMC_ENV_PART 2
+
+/* SPI */
+#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
+#define CONFIG_SF_DEFAULT_SPEED 24000000
+#define CONFIG_SPI_FLASH_SIZE (4 << 20)
+
+/* USB Host support */
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_TEGRA
+#define CONFIG_USB_STORAGE
+
+/* USB networking support */
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_ASIX
+
+/* PCI host support */
+#define CONFIG_PCI
+#define CONFIG_PCI_PNP
+#define CONFIG_CMD_PCI
+
+/* General networking support */
+
+#include "tegra-common-usb-gadget.h"
+#include "tegra-common-post.h"
+
+#define CONFIG_ARMV7_PSCI 1
+#define CONFIG_ARMV7_PSCI_NR_CPUS 4
+/* Reserve top 1M for secure RAM */
+#define CONFIG_ARMV7_SECURE_BASE 0xfff00000
+#define CONFIG_ARMV7_SECURE_RESERVE_SIZE 0x00100000
+
+#endif /* __CONFIG_H */