rockchip: rk322x: add dts file
The dts files are from kernel and with modify to adapt U-Boot.
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
diff --git a/arch/arm/dts/rk3229-evb.dts b/arch/arm/dts/rk3229-evb.dts
new file mode 100644
index 0000000..ccdac1c
--- /dev/null
+++ b/arch/arm/dts/rk3229-evb.dts
@@ -0,0 +1,77 @@
+/*
+ * (C) Copyright 2017 Rockchip Electronics Co., Ltd.
+ *
+ * SPDX-License-Identifier: GPL-2.0+ X11
+ */
+
+/dts-v1/;
+
+#include "rk322x.dtsi"
+
+/ {
+ model = "Rockchip RK3229 Evaluation board";
+ compatible = "rockchip,rk3229-evb", "rockchip,rk3229";
+
+ chosen {
+ stdout-path = &uart2;
+ };
+
+ memory@60000000 {
+ device_type = "memory";
+ reg = <0x60000000 0x40000000>;
+ };
+
+ ext_gmac: ext_gmac {
+ compatible = "fixed-clock";
+ clock-frequency = <125000000>;
+ clock-output-names = "ext_gmac";
+ #clock-cells = <0>;
+ };
+
+ vcc_phy: vcc-phy-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ regulator-name = "vcc_phy";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+};
+
+&dmc {
+ rockchip,sdram-channel = /bits/ 8 <1 10 3 2 1 0 15 15>;
+ rockchip,pctl-timing = <0x96 0xC8 0x1F3 0xF 0x8000004D 0x4 0x4E 0x6 0x3
+ 0x0 0x6 0x5 0xC 0x10 0x6 0x4 0x4
+ 0x5 0x4 0x200 0x3 0xA 0x40 0x0 0x1
+ 0x5 0x5 0x3 0xC 0x1E 0x100 0x0 0x4
+ 0x0 0x924>;
+ rockchip,phy-timing = <0x220 0x1 0x0 0x0 0x0 0x4 0x60>;
+ rockchip,sdram-params = <0x428B188 0x0 0x21 0x472 0x15
+ 0 300 3 0 120>;
+};
+
+&gmac {
+ assigned-clocks = <&cru SCLK_MAC_EXTCLK>, <&cru SCLK_MAC>;
+ assigned-clock-parents = <&ext_gmac>, <&cru SCLK_MAC_EXTCLK>;
+ clock_in_out = "input";
+ phy-supply = <&vcc_phy>;
+ phy-mode = "rgmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii_pins>;
+ snps,reset-gpio = <&gpio2 RK_PD0 GPIO_ACTIVE_LOW>;
+ snps,reset-active-low;
+ snps,reset-delays-us = <0 10000 1000000>;
+ tx_delay = <0x30>;
+ rx_delay = <0x10>;
+ status = "okay";
+};
+
+&emmc {
+ u-boot,dm-pre-reloc;
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};