ARM: DTS: imx6q-logicpd: Update DTS/DTSI files

The i.MX6 SOM and development kits have undergone significant
updates and changes over the past few months.  This re-sync's
the U-Boot with Logic PD's BSP.

Signed-off-by: Adam Ford <aford173@gmail.com>
diff --git a/arch/arm/dts/imx6-logicpd-som.dtsi b/arch/arm/dts/imx6-logicpd-som.dtsi
new file mode 100644
index 0000000..3fc50ba
--- /dev/null
+++ b/arch/arm/dts/imx6-logicpd-som.dtsi
@@ -0,0 +1,373 @@
+/*
+ * Copyright 2018 Logic PD
+ * This file is adapted from imx6qdl-sabresd.dtsi.
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory {
+		reg = <0x10000000 0x80000000>;
+	};
+
+	reg_wl18xx_vmmc: regulator-wl18xx {
+		compatible = "regulator-fixed";
+		regulator-name = "vwl1837";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio7 0 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+};
+
+/* Reroute power feeding the CPU to come from the external PMIC */
+&reg_arm
+{
+	vin-supply = <&sw1a_reg>;
+};
+
+&reg_soc
+{
+	vin-supply = <&sw1c_reg>;
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	status = "okay";
+	nand-on-flash-bbt;
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	pmic: pfuze100@08 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <725000>;
+				regulator-max-microvolt = <1450000>;
+				regulator-name = "vddcore";
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <725000>;
+				regulator-max-microvolt = <1450000>;
+				regulator-name = "vddsoc";
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "gen_3v3";
+				regulator-boot-on;
+				/* regulator-always-on; */
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-name = "sw3a_vddr";
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-name = "sw3b_vddr";
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "gen_rgmii";
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+				regulator-name = "gen_5v0";
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "gen_vsns";
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-name = "gen_1v5";
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-name = "vgen2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-name = "gen_vadj_0";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-name = "gen_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-name = "gen_adj_1";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-name = "gen_2v5";
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-always-on;
+			};
+
+			coin_reg: coin {
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+			};
+		};
+	};
+
+	temp_sense0: tmp102@4a {
+		compatible = "ti,tmp102";
+		reg = <0x4a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tempsense>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
+		#thermal-sensor-cells = <1>;
+	};
+
+	temp_sense1: tmp102@49 {
+		compatible = "ti,tmp102";
+		reg = <0x49>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
+		#thermal-sensor-cells = <1>;
+	};
+
+	mfg_eeprom: at24@51 {
+		compatible = "atmel,24c64";
+		pagesize = <32>;
+		read-only;
+		reg = <0x51>;
+	};
+
+	user_eeprom: at24@52 {
+		compatible = "atmel,24c64";
+		pagesize = <32>;
+		reg = <0x52>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_MCLK__ARM_TRACE_CTL	0x1b0b0
+			MX6QDL_PAD_CSI0_PIXCLK__ARM_EVENTO	0x1b0b0
+			MX6QDL_PAD_CSI0_VSYNC__ARM_TRACE00	0x1b0b0
+			MX6QDL_PAD_CSI0_DATA_EN__ARM_TRACE_CLK	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT4__ARM_TRACE01	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT5__ARM_TRACE02	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT6__ARM_TRACE03	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT7__ARM_TRACE04	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT8__ARM_TRACE05	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT9__ARM_TRACE06	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT10__ARM_TRACE07	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT11__ARM_TRACE08	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT12__ARM_TRACE09	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT13__ARM_TRACE10	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT14__ARM_TRACE11	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT15__ARM_TRACE12	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT16__ARM_TRACE13	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT17__ARM_TRACE14	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT18__ARM_TRACE15	0x1b0b0
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1        0x130b0
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0x0b0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0x0b0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0x0b0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0x0b000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0x0b0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0x0b0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0x0b0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0x0b0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0x0b0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0x0b0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0x0b0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0x0b0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0x0b0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0x0b0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0x0b0b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D18__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_RST__GPIO7_IO08	0x13059	/* BT_EN */
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT5__UART2_RTS_B	0x1b0b1
+			MX6QDL_PAD_SD4_DAT6__UART2_CTS_B	0x1b0b1
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD	0x170B9
+			MX6QDL_PAD_SD1_CLK__SD1_CLK	0x100B9
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0	0x170B9
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1	0x170B9
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2	0x170B9
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3	0x170B9
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD    0x17049
+			MX6QDL_PAD_SD3_CLK__SD3_CLK    0x10049
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17049
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17049
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17049
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17049
+			MX6QDL_PAD_SD3_DAT4__GPIO7_IO01	0x130b0 /* WL_IRQ */
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00	0x17059 /* WLAN_EN */
+		>;
+	};
+
+	pinctrl_tempsense: tempsensegrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x1b0b0	/* Temp Sense Alert */
+		>;
+	};
+};
+
+&snvs_poweroff {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+	uart-has-rtscts;
+	bluetooth {
+		compatible = "ti,wl1837-st";
+		enable-gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	non-removable;
+	keep-power-in-suspend;
+	enable-sdio-wakeup;
+	status = "okay";
+	vmmc-supply = <&sw2_reg>;
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	non-removable;
+	cap-power-off-card;
+	keep-power-in-suspend;
+	wakeup-source;
+	vmmc-supply = <&reg_wl18xx_vmmc>;
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		  compatible = "ti,wl1837";
+		  reg = <2>;
+		  interrupt-parent = <&gpio7>;
+		  interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+		  tcxo-clock-frequency = <26000000>;
+	};
+};