doc: FIT image: fix incorrect examples of DT node unit address
The DT spec demands a unit-address of a node name to match the "reg"
property in that node. Newer dtc versions will throw warnings if this is
not the case.
Fix all occurences in the FIT image example files where this was not
observed, to not give bad examples to the reader.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
diff --git a/doc/uImage.FIT/kernel.its b/doc/uImage.FIT/kernel.its
index 0aaf47e..77ddf62 100644
--- a/doc/uImage.FIT/kernel.its
+++ b/doc/uImage.FIT/kernel.its
@@ -9,7 +9,7 @@
#address-cells = <1>;
images {
- kernel@1 {
+ kernel {
description = "Vanilla Linux kernel";
data = /incbin/("./vmlinux.bin.gz");
type = "kernel";
@@ -18,20 +18,20 @@
compression = "gzip";
load = <00000000>;
entry = <00000000>;
- hash@1 {
+ hash-1 {
algo = "crc32";
};
- hash@2 {
+ hash-2 {
algo = "sha1";
};
};
};
configurations {
- default = "config@1";
- config@1 {
+ default = "config-1";
+ config-1 {
description = "Boot Linux kernel";
- kernel = "kernel@1";
+ kernel = "kernel";
};
};
};
@@ -47,7 +47,7 @@
#address-cells = <1>;
images {
- kernel@1 {
+ kernel {
description = "Vanilla Linux kernel";
data = /incbin/("./image.bin.lzo");
type = "kernel";
@@ -56,12 +56,12 @@
compression = "lzo";
load = <0x01000000>;
entry = <0x00000000>;
- hash@2 {
+ hash-2 {
algo = "sha1";
};
};
- setup@1 {
+ setup {
description = "Linux setup.bin";
data = /incbin/("./setup.bin");
type = "x86_setup";
@@ -70,18 +70,18 @@
compression = "none";
load = <0x00090000>;
entry = <0x00090000>;
- hash@2 {
+ hash-2 {
algo = "sha1";
};
};
};
configurations {
- default = "config@1";
- config@1 {
+ default = "config-1";
+ config-1 {
description = "Boot Linux kernel";
- kernel = "kernel@1";
- setup = "setup@1";
+ kernel = "kernel";
+ setup = "setup";
};
};
};
diff --git a/doc/uImage.FIT/kernel_fdt.its b/doc/uImage.FIT/kernel_fdt.its
index 7c52148..000d85b 100644
--- a/doc/uImage.FIT/kernel_fdt.its
+++ b/doc/uImage.FIT/kernel_fdt.its
@@ -9,7 +9,7 @@
#address-cells = <1>;
images {
- kernel@1 {
+ kernel {
description = "Vanilla Linux kernel";
data = /incbin/("./vmlinux.bin.gz");
type = "kernel";
@@ -18,34 +18,34 @@
compression = "gzip";
load = <00000000>;
entry = <00000000>;
- hash@1 {
+ hash-1 {
algo = "crc32";
};
- hash@2 {
+ hash-2 {
algo = "sha1";
};
};
- fdt@1 {
+ fdt-1 {
description = "Flattened Device Tree blob";
data = /incbin/("./target.dtb");
type = "flat_dt";
arch = "ppc";
compression = "none";
- hash@1 {
+ hash-1 {
algo = "crc32";
};
- hash@2 {
+ hash-2 {
algo = "sha1";
};
};
};
configurations {
- default = "conf@1";
- conf@1 {
+ default = "conf-1";
+ conf-1 {
description = "Boot Linux kernel with FDT blob";
- kernel = "kernel@1";
- fdt = "fdt@1";
+ kernel = "kernel";
+ fdt = "fdt-1";
};
};
};
diff --git a/doc/uImage.FIT/multi-with-fpga.its b/doc/uImage.FIT/multi-with-fpga.its
index 0cdb31f..47ee576 100644
--- a/doc/uImage.FIT/multi-with-fpga.its
+++ b/doc/uImage.FIT/multi-with-fpga.its
@@ -10,31 +10,31 @@
#address-cells = <1>;
images {
- fdt@1 {
+ fdt-1 {
description = "zc706";
data = /incbin/("/tftpboot/devicetree.dtb");
type = "flat_dt";
arch = "arm";
compression = "none";
load = <0x10000000>;
- hash@1 {
+ hash-1 {
algo = "md5";
};
};
- fpga@1 {
+ fpga {
description = "FPGA";
data = /incbin/("/tftpboot/download.bit");
type = "fpga";
arch = "arm";
compression = "none";
load = <0x30000000>;
- hash@1 {
+ hash-1 {
algo = "md5";
};
};
- linux_kernel@1 {
+ linux_kernel {
description = "Linux";
data = /incbin/("/tftpboot/zImage");
type = "kernel";
@@ -43,25 +43,25 @@
compression = "none";
load = <0x8000>;
entry = <0x8000>;
- hash@1 {
+ hash-1 {
algo = "md5";
};
};
};
configurations {
- default = "config@2";
- config@1 {
+ default = "config-2";
+ config-1 {
description = "Linux";
- kernel = "linux_kernel@1";
- fdt = "fdt@1";
+ kernel = "linux_kernel";
+ fdt = "fdt-1";
};
- config@2 {
+ config-2 {
description = "Linux with fpga";
- kernel = "linux_kernel@1";
- fdt = "fdt@1";
- fpga = "fpga@1";
+ kernel = "linux_kernel";
+ fdt = "fdt-1";
+ fpga = "fpga";
};
};
};
diff --git a/doc/uImage.FIT/multi-with-loadables.its b/doc/uImage.FIT/multi-with-loadables.its
index a8545d2..4d4909f 100644
--- a/doc/uImage.FIT/multi-with-loadables.its
+++ b/doc/uImage.FIT/multi-with-loadables.its
@@ -10,7 +10,7 @@
#address-cells = <1>;
images {
- xen_kernel@1 {
+ xen_kernel {
description = "xen binary";
data = /incbin/("./xen");
type = "kernel";
@@ -19,36 +19,36 @@
compression = "none";
load = <0xa0000000>;
entry = <0xa0000000>;
- hash@1 {
+ hash-1 {
algo = "md5";
};
};
- fdt@1 {
+ fdt-1 {
description = "xexpress-ca15 tree blob";
data = /incbin/("./vexpress-v2p-ca15-tc1.dtb");
type = "flat_dt";
arch = "arm";
compression = "none";
load = <0xb0000000>;
- hash@1 {
+ hash-1 {
algo = "md5";
};
};
- fdt@2 {
+ fdt-2 {
description = "xexpress-ca15 tree blob";
data = /incbin/("./vexpress-v2p-ca15-tc1.dtb");
type = "flat_dt";
arch = "arm";
compression = "none";
load = <0xb0400000>;
- hash@1 {
+ hash-1 {
algo = "md5";
};
};
- linux_kernel@1 {
+ linux_kernel {
description = "Linux Image";
data = /incbin/("./Image");
type = "kernel";
@@ -57,33 +57,33 @@
compression = "none";
load = <0xa0000000>;
entry = <0xa0000000>;
- hash@1 {
+ hash-1 {
algo = "md5";
};
};
};
configurations {
- default = "config@2";
+ default = "config-2";
- config@1 {
+ config-1 {
description = "Just plain Linux";
- kernel = "linux_kernel@1";
- fdt = "fdt@1";
+ kernel = "linux_kernel";
+ fdt = "fdt-1";
};
- config@2 {
+ config-2 {
description = "Xen one loadable";
- kernel = "xen_kernel@1";
- fdt = "fdt@1";
- loadables = "linux_kernel@1";
+ kernel = "xen_kernel";
+ fdt = "fdt-1";
+ loadables = "linux_kernel";
};
- config@3 {
+ config-3 {
description = "Xen two loadables";
- kernel = "xen_kernel@1";
- fdt = "fdt@1";
- loadables = "linux_kernel@1", "fdt@2";
+ kernel = "xen_kernel";
+ fdt = "fdt-1";
+ loadables = "linux_kernel", "fdt-2";
};
};
};
diff --git a/doc/uImage.FIT/multi.its b/doc/uImage.FIT/multi.its
index 37369ec..26c8dad 100644
--- a/doc/uImage.FIT/multi.its
+++ b/doc/uImage.FIT/multi.its
@@ -9,7 +9,7 @@
#address-cells = <1>;
images {
- kernel@1 {
+ kernel-1 {
description = "vanilla-2.6.23";
data = /incbin/("./vmlinux.bin.gz");
type = "kernel";
@@ -18,15 +18,15 @@
compression = "gzip";
load = <00000000>;
entry = <00000000>;
- hash@1 {
+ hash-1 {
algo = "md5";
};
- hash@2 {
+ hash-2 {
algo = "sha1";
};
};
- kernel@2 {
+ kernel-2 {
description = "2.6.23-denx";
data = /incbin/("./2.6.23-denx.bin.gz");
type = "kernel";
@@ -35,12 +35,12 @@
compression = "gzip";
load = <00000000>;
entry = <00000000>;
- hash@1 {
+ hash-1 {
algo = "sha1";
};
};
- kernel@3 {
+ kernel-3 {
description = "2.4.25-denx";
data = /incbin/("./2.4.25-denx.bin.gz");
type = "kernel";
@@ -49,12 +49,12 @@
compression = "gzip";
load = <00000000>;
entry = <00000000>;
- hash@1 {
+ hash-1 {
algo = "md5";
};
};
- ramdisk@1 {
+ ramdisk-1 {
description = "eldk-4.2-ramdisk";
data = /incbin/("./eldk-4.2-ramdisk");
type = "ramdisk";
@@ -63,12 +63,12 @@
compression = "gzip";
load = <00000000>;
entry = <00000000>;
- hash@1 {
+ hash-1 {
algo = "sha1";
};
};
- ramdisk@2 {
+ ramdisk-2 {
description = "eldk-3.1-ramdisk";
data = /incbin/("./eldk-3.1-ramdisk");
type = "ramdisk";
@@ -77,30 +77,30 @@
compression = "gzip";
load = <00000000>;
entry = <00000000>;
- hash@1 {
+ hash-1 {
algo = "crc32";
};
};
- fdt@1 {
+ fdt-1 {
description = "tqm5200-fdt";
data = /incbin/("./tqm5200.dtb");
type = "flat_dt";
arch = "ppc";
compression = "none";
- hash@1 {
+ hash-1 {
algo = "crc32";
};
};
- fdt@2 {
+ fdt-2 {
description = "tqm5200s-fdt";
data = /incbin/("./tqm5200s.dtb");
type = "flat_dt";
arch = "ppc";
compression = "none";
load = <00700000>;
- hash@1 {
+ hash-1 {
algo = "sha1";
};
};
@@ -108,26 +108,26 @@
};
configurations {
- default = "config@1";
+ default = "config-1";
- config@1 {
+ config-1 {
description = "tqm5200 vanilla-2.6.23 configuration";
- kernel = "kernel@1";
- ramdisk = "ramdisk@1";
- fdt = "fdt@1";
+ kernel = "kernel-1";
+ ramdisk = "ramdisk-1";
+ fdt = "fdt-1";
};
- config@2 {
+ config-2 {
description = "tqm5200s denx-2.6.23 configuration";
- kernel = "kernel@2";
- ramdisk = "ramdisk@1";
- fdt = "fdt@2";
+ kernel = "kernel-2";
+ ramdisk = "ramdisk-1";
+ fdt = "fdt-2";
};
- config@3 {
+ config-3 {
description = "tqm5200s denx-2.4.25 configuration";
- kernel = "kernel@3";
- ramdisk = "ramdisk@2";
+ kernel = "kernel-3";
+ ramdisk = "ramdisk-2";
};
};
};
diff --git a/doc/uImage.FIT/multi_spl.its b/doc/uImage.FIT/multi_spl.its
index d43563d..5942199 100644
--- a/doc/uImage.FIT/multi_spl.its
+++ b/doc/uImage.FIT/multi_spl.its
@@ -45,7 +45,7 @@
load = <0x40000>;
};
- fdt@1 {
+ fdt-1 {
description = "Pine64+ DT";
type = "flat_dt";
compression = "none";
@@ -53,7 +53,7 @@
arch = "arm64";
};
- fdt@2 {
+ fdt-2 {
description = "Pine64 DT";
type = "flat_dt";
compression = "none";
@@ -79,18 +79,18 @@
};
configurations {
- default = "config@1";
+ default = "config-1";
- config@1 {
+ config-1 {
description = "sun50i-a64-pine64-plus";
loadables = "uboot", "atf", "kernel", "initrd";
- fdt = "fdt@1";
+ fdt = "fdt-1";
};
- config@2 {
+ config-2 {
description = "sun50i-a64-pine64";
loadables = "uboot", "atf", "mgmt-firmware";
- fdt = "fdt@2";
+ fdt = "fdt-2";
};
};
};
diff --git a/doc/uImage.FIT/sign-configs.its b/doc/uImage.FIT/sign-configs.its
index 3c17f04..9e992c1 100644
--- a/doc/uImage.FIT/sign-configs.its
+++ b/doc/uImage.FIT/sign-configs.its
@@ -5,7 +5,7 @@
#address-cells = <1>;
images {
- kernel@1 {
+ kernel {
data = /incbin/("test-kernel.bin");
type = "kernel_noload";
arch = "sandbox";
@@ -14,28 +14,28 @@
load = <0x4>;
entry = <0x8>;
kernel-version = <1>;
- hash@1 {
+ hash-1 {
algo = "sha1";
};
};
- fdt@1 {
+ fdt-1 {
description = "snow";
data = /incbin/("sandbox-kernel.dtb");
type = "flat_dt";
arch = "sandbox";
compression = "none";
fdt-version = <1>;
- hash@1 {
+ hash-1 {
algo = "sha1";
};
};
};
configurations {
- default = "conf@1";
- conf@1 {
- kernel = "kernel@1";
- fdt = "fdt@1";
- signature@1 {
+ default = "conf-1";
+ conf-1 {
+ kernel = "kernel";
+ fdt = "fdt-1";
+ signature {
algo = "sha1,rsa2048";
key-name-hint = "dev";
sign-images = "fdt", "kernel";
diff --git a/doc/uImage.FIT/sign-images.its b/doc/uImage.FIT/sign-images.its
index f69326a..18c759e 100644
--- a/doc/uImage.FIT/sign-images.its
+++ b/doc/uImage.FIT/sign-images.its
@@ -5,7 +5,7 @@
#address-cells = <1>;
images {
- kernel@1 {
+ kernel {
data = /incbin/("test-kernel.bin");
type = "kernel_noload";
arch = "sandbox";
@@ -14,29 +14,29 @@
load = <0x4>;
entry = <0x8>;
kernel-version = <1>;
- signature@1 {
+ signature {
algo = "sha1,rsa2048";
key-name-hint = "dev";
};
};
- fdt@1 {
+ fdt-1 {
description = "snow";
data = /incbin/("sandbox-kernel.dtb");
type = "flat_dt";
arch = "sandbox";
compression = "none";
fdt-version = <1>;
- signature@1 {
+ signature {
algo = "sha1,rsa2048";
key-name-hint = "dev";
};
};
};
configurations {
- default = "conf@1";
- conf@1 {
- kernel = "kernel@1";
- fdt = "fdt@1";
+ default = "conf-1";
+ conf-1 {
+ kernel = "kernel";
+ fdt = "fdt-1";
};
};
};
diff --git a/doc/uImage.FIT/update3.its b/doc/uImage.FIT/update3.its
index a6eaef6..0659f20 100644
--- a/doc/uImage.FIT/update3.its
+++ b/doc/uImage.FIT/update3.its
@@ -9,34 +9,34 @@
#address-cells = <1>;
images {
- update@1 {
+ update-1 {
description = "Linux kernel binary";
data = /incbin/("./vmlinux.bin.gz");
compression = "none";
type = "firmware";
load = <FF700000>;
- hash@1 {
+ hash-1 {
algo = "sha1";
};
};
- update@2 {
+ update-2 {
description = "Ramdisk image";
data = /incbin/("./ramdisk_image.gz");
compression = "none";
type = "firmware";
load = <FF8E0000>;
- hash@1 {
+ hash-1 {
algo = "sha1";
};
};
- update@3 {
+ update-3 {
description = "FDT blob";
data = /incbin/("./blob.fdt");
compression = "none";
type = "firmware";
load = <FFAC0000>;
- hash@1 {
+ hash-1 {
algo = "sha1";
};
};
diff --git a/doc/uImage.FIT/update_uboot.its b/doc/uImage.FIT/update_uboot.its
index 846723e..c2ac266 100644
--- a/doc/uImage.FIT/update_uboot.its
+++ b/doc/uImage.FIT/update_uboot.its
@@ -10,13 +10,13 @@
#address-cells = <1>;
images {
- update@1 {
+ update-1 {
description = "U-Boot binary";
data = /incbin/("./u-boot.bin");
compression = "none";
type = "firmware";
load = <FFFC0000>;
- hash@1 {
+ hash-1 {
algo = "sha1";
};
};