ARM: dts: rockchip: rk3588: add support for USB 3.0 devices
Add support for the USB 3.0 devices in rk3588:
- USB DRD(dual role device) 3.0 #0 as usbdrd3_0 which is available in
rk3588s
- USB DRD(dual role device) 3.0 #1 as usbdrd3_1 which is available in
rk3588 only
- USB DP PHY (combo USB3.0 and DisplayPort Alt Mode ) #0 phy interface
as usbdp_phy0
- USB DP PHY (combo USB3.0 and DisplayPort Alt Mode ) #1 phy interface
as usbdp_phy1
- USB 2.0 phy #2 , the USB 3.0 device can work with this phy in USB 2.0
mode
- associated GRFs (general register files) for the devices.
Signed-off-by: Joseph Chen <chenjh@rock-chips.com>
[eugen.hristev@collabora.com: move nodes to right place, adapt from latest
linux kernel]
Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
diff --git a/arch/arm/dts/rk3588-u-boot.dtsi b/arch/arm/dts/rk3588-u-boot.dtsi
index 4c8ac80..68b419f 100644
--- a/arch/arm/dts/rk3588-u-boot.dtsi
+++ b/arch/arm/dts/rk3588-u-boot.dtsi
@@ -5,3 +5,96 @@
#include "rockchip-u-boot.dtsi"
#include "rk3588s-u-boot.dtsi"
+
+/ {
+ usbdrd3_1: usbdrd3_1 {
+ compatible = "rockchip,rk3588-dwc3", "rockchip,rk3399-dwc3";
+ clocks = <&cru REF_CLK_USB3OTG1>, <&cru SUSPEND_CLK_USB3OTG1>,
+ <&cru ACLK_USB3OTG1>;
+ clock-names = "ref", "suspend", "bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ status = "disabled";
+
+ usbdrd_dwc3_1: usb@fc400000 {
+ compatible = "snps,dwc3";
+ reg = <0x0 0xfc400000 0x0 0x400000>;
+ interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH 0>;
+ power-domains = <&power RK3588_PD_USB>;
+ resets = <&cru SRST_A_USB3OTG1>;
+ reset-names = "usb3-otg";
+ dr_mode = "host";
+ phys = <&u2phy1_otg>, <&usbdp_phy1_u3>;
+ phy-names = "usb2-phy", "usb3-phy";
+ phy_type = "utmi_wide";
+ snps,dis_enblslpm_quirk;
+ snps,dis-u2-freeclk-exists-quirk;
+ snps,dis-del-phy-power-chg-quirk;
+ snps,dis-tx-ipgap-linecheck-quirk;
+ };
+ };
+
+ usbdpphy1_grf: syscon@fd5cc000 {
+ compatible = "rockchip,rk3588-usbdpphy-grf", "syscon";
+ reg = <0x0 0xfd5cc000 0x0 0x4000>;
+ };
+
+ usb2phy1_grf: syscon@fd5d4000 {
+ compatible = "rockchip,rk3588-usb2phy-grf", "syscon",
+ "simple-mfd";
+ reg = <0x0 0xfd5d4000 0x0 0x4000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ u2phy1: usb2-phy@4000 {
+ compatible = "rockchip,rk3588-usb2phy";
+ reg = <0x4000 0x10>;
+ interrupts = <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH 0>;
+ resets = <&cru SRST_OTGPHY_U3_1>, <&cru SRST_P_USB2PHY_U3_1_GRF0>;
+ reset-names = "phy", "apb";
+ clocks = <&cru CLK_USB2PHY_HDPTXRXPHY_REF>;
+ clock-names = "phyclk";
+ clock-output-names = "usb480m_phy1";
+ #clock-cells = <0>;
+ rockchip,usbctrl-grf = <&usb_grf>;
+ status = "disabled";
+
+ u2phy1_otg: otg-port {
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+ };
+ };
+
+ usbdp_phy1: phy@fed90000 {
+ compatible = "rockchip,rk3588-usbdp-phy";
+ reg = <0x0 0xfed90000 0x0 0x10000>;
+ rockchip,u2phy-grf = <&usb2phy1_grf>;
+ rockchip,usb-grf = <&usb_grf>;
+ rockchip,usbdpphy-grf = <&usbdpphy1_grf>;
+ rockchip,vo-grf = <&vo0_grf>;
+ clocks = <&cru CLK_USBDPPHY_MIPIDCPPHY_REF>,
+ <&cru CLK_USBDP_PHY1_IMMORTAL>,
+ <&cru PCLK_USBDPPHY1>,
+ <&u2phy1>;
+ clock-names = "refclk", "immortal", "pclk", "utmi";
+ resets = <&cru SRST_USBDP_COMBO_PHY1_INIT>,
+ <&cru SRST_USBDP_COMBO_PHY1_CMN>,
+ <&cru SRST_USBDP_COMBO_PHY1_LANE>,
+ <&cru SRST_USBDP_COMBO_PHY1_PCS>,
+ <&cru SRST_P_USBDPPHY1>;
+ reset-names = "init", "cmn", "lane", "pcs_apb", "pma_apb";
+ status = "disabled";
+
+ usbdp_phy1_dp: dp-port {
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
+ usbdp_phy1_u3: usb3-port {
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+ };
+};