synchronizition with mainline
diff --git a/Makefile b/Makefile
index 63e7dcb..8d500f5 100644
--- a/Makefile
+++ b/Makefile
@@ -144,7 +144,7 @@
CROSS_COMPILE = m68k-elf-
endif
ifeq ($(ARCH),microblaze)
-CROSS_COMPILE = microblaze-uclinux-
+CROSS_COMPILE = mb-
endif
ifeq ($(ARCH),blackfin)
CROSS_COMPILE = bfin-uclinux-
@@ -201,9 +201,8 @@
LIBS += cpu/ixp/npe/libnpe.a
endif
LIBS += lib_$(ARCH)/lib$(ARCH).a
-LIBS += fs/cramfs/libcramfs.a fs/ext2/libext2fs.a fs/fat/libfat.a \
- fs/fdos/libfdos.a fs/jffs2/libjffs2.a fs/reiserfs/libreiserfs.a \
- fs/romfs/libromfs.a
+LIBS += fs/cramfs/libcramfs.a fs/fat/libfat.a fs/fdos/libfdos.a fs/jffs2/libjffs2.a \
+ fs/reiserfs/libreiserfs.a fs/ext2/libext2fs.a
LIBS += net/libnet.a
LIBS += disk/libdisk.a
LIBS += rtc/librtc.a
@@ -326,14 +325,14 @@
tags ctags:
ctags -w -o $(OBJTREE)/ctags `find $(SUBDIRS) include \
lib_generic board/$(BOARDDIR) cpu/$(CPU) lib_$(ARCH) \
- fs/cramfs fs/fat fs/fdos fs/jffs2 fs/romfs\
+ fs/cramfs fs/fat fs/fdos fs/jffs2 \
net disk rtc dtt drivers drivers/sk98lin common \
\( -name CVS -prune \) -o \( -name '*.[ch]' -print \)`
etags:
etags -a -o $(OBJTREE)/etags `find $(SUBDIRS) include \
lib_generic board/$(BOARDDIR) cpu/$(CPU) lib_$(ARCH) \
- fs/cramfs fs/fat fs/fdos fs/jffs2 fs/romfs\
+ fs/cramfs fs/fat fs/fdos fs/jffs2 \
net disk rtc dtt drivers drivers/sk98lin common \
\( -name CVS -prune \) -o \( -name '*.[ch]' -print \)`
diff --git a/board/xilinx/xupv2p/Makefile b/board/xilinx/xupv2p/Makefile
index 99e7047..9ab5633 100644
--- a/board/xilinx/xupv2p/Makefile
+++ b/board/xilinx/xupv2p/Makefile
@@ -22,17 +22,32 @@
#
include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common)
+$(shell mkdir -p $(obj)../xilinx_enet)
+endif
+
+INCS := -I../common -I../xilinx_enet
+CFLAGS += $(INCS)
+HOST_CFLAGS += $(INCS)
LIB = $(obj)lib$(BOARD).a
-COBJS = $(BOARD).o
+COBJS = $(BOARD).o \
+ ../xilinx_enet/emac_adapter.o ../xilinx_enet/xemac.o \
+ ../xilinx_enet/xemac_options.o ../xilinx_enet/xemac_polled.o \
+ ../xilinx_enet/xemac_intr.o ../xilinx_enet/xemac_g.o \
+ ../xilinx_enet/xemac_intr_dma.o ../common/xipif_v1_23_b.o \
+ ../common/xbasic_types.o ../common/xdma_channel.o \
+ ../common/xdma_channel_sg.o ../common/xpacket_fifo_v1_00_b.o \
+ ../common/xversion.o \
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
SOBJS := $(addprefix $(obj),$(SOBJS))
-$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
+$(LIB): $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $^
clean:
rm -f $(SOBJS) $(OBJS)
diff --git a/board/xilinx/xupv2p/config.mk b/board/xilinx/xupv2p/config.mk
index eedfb24..c07b0b3 100644
--- a/board/xilinx/xupv2p/config.mk
+++ b/board/xilinx/xupv2p/config.mk
@@ -25,8 +25,8 @@
# Version: Xilinx EDK 8.2.02 EDK_Im_Sp2.4
#
-TEXT_BASE = 0x30000000
+TEXT_BASE = 0x38000000
-PLATFORM_CPPFLAGS += -mxl-pattern-compare
PLATFORM_CPPFLAGS += -mno-xl-soft-mul
-PLATFORM_CPPFLAGS += -mcpu=v5.00.c
+PLATFORM_CPPFLAGS += -mno-xl-soft-div
+PLATFORM_CPPFLAGS += -mxl-barrel-shift
diff --git a/board/xilinx/xupv2p/xparameters.h b/board/xilinx/xupv2p/xparameters.h
index 0bb7a80..a96c693 100644
--- a/board/xilinx/xupv2p/xparameters.h
+++ b/board/xilinx/xupv2p/xparameters.h
@@ -28,24 +28,17 @@
/* System Clock Frequency */
#define XILINX_CLOCK_FREQ 100000000
-/* Microblaze is microblaze_0 */
-#define XILINX_USE_MSR_INSTR 1
-#define XILINX_PVR 0
-#define XILINX_FSL_NUMBER 0
-
/* Interrupt controller is opb_intc_0 */
#define XILINX_INTC_BASEADDR 0x41200000
-#define XILINX_INTC_NUM_INTR_INPUTS 7
+#define XILINX_INTC_NUM_INTR_INPUTS 11
/* Timer pheriphery is opb_timer_1 */
#define XILINX_TIMER_BASEADDR 0x41c00000
-#define XILINX_TIMER_IRQ 0
+#define XILINX_TIMER_IRQ 1
/* Uart pheriphery is RS232_Uart_1 */
-#define XILINX_UARTLITE_BASEADDR 0x40600000
-#define XILINX_UARTLITE_BAUDRATE 115200
-
-/* IIC doesn't exist */
+#define XILINX_UART_BASEADDR 0x40600000
+#define XILINX_UART_BAUDRATE 115200
/* GPIO is LEDs_4Bit*/
#define XILINX_GPIO_BASEADDR 0x40000000
@@ -58,10 +51,14 @@
/* Sysace Controller is SysACE_CompactFlash */
#define XILINX_SYSACE_BASEADDR 0x41800000
+#define XILINX_SYSACE_HIGHADDR 0x4180ffff
#define XILINX_SYSACE_MEM_WIDTH 16
/* Ethernet controller is Ethernet_MAC */
-#define XILINX_EMAC_BASEADDR 0x40c00000
-#define XILINX_EMAC_DMA_PRESENT 3
-#define XILINX_EMAC_HALF_DUPLEX_EXIST 1
-#define XILINX_EMAC_MII_EXIST 1
+#define XPAR_XEMAC_NUM_INSTANCES 1
+#define XPAR_OPB_ETHERNET_0_DEVICE_ID 0
+#define XPAR_OPB_ETHERNET_0_BASEADDR 0x40c00000
+#define XPAR_OPB_ETHERNET_0_HIGHADDR 0x40c0ffff
+#define XPAR_OPB_ETHERNET_0_DMA_PRESENT 1
+#define XPAR_OPB_ETHERNET_0_ERR_COUNT_EXIST 1
+#define XPAR_OPB_ETHERNET_0_MII_EXIST 1
diff --git a/common/cmd_jffs2.c b/common/cmd_jffs2.c
index 3e6061a..513a226 100644
--- a/common/cmd_jffs2.c
+++ b/common/cmd_jffs2.c
@@ -85,7 +85,7 @@
*/
/*
- * JFFS2/CRAMFS/ROMFS support
+ * JFFS2/CRAMFS support
*/
#include <common.h>
#include <command.h>
@@ -175,11 +175,6 @@
extern int cramfs_ls (struct part_info *info, char *filename);
extern int cramfs_info (struct part_info *info);
-extern int romfs_check (struct part_info *info);
-extern int romfs_load (char *loadoffset, struct part_info *info, char *filename);
-extern int romfs_ls (struct part_info *info, char *filename);
-extern int romfs_info (struct part_info *info);
-
static struct part_info* jffs2_part_info(struct mtd_device *dev, unsigned int part_num);
/* command line only routines */
@@ -1879,22 +1874,14 @@
if ((part = jffs2_part_info(current_dev, current_partnum))){
- /* check partition type for JFFS2, cramfs, romfs */
- if (cramfs_check(part)) {
- fsname = "CRAMFS";
- } else if (romfs_check(part)) {
- fsname = "ROMFS";
- } else {
- fsname = "JFFS2";
- }
+ /* check partition type for cramfs */
+ fsname = (cramfs_check(part) ? "CRAMFS" : "JFFS2");
printf("### %s loading '%s' to 0x%lx\n", fsname, filename, offset);
if (cramfs_check(part)) {
size = cramfs_load ((char *) offset, part, filename);
- } else if (romfs_check(part)){
- size = romfs_load ((char *) offset, part, filename);
} else {
- /* if this is not cramfs or romfs assume jffs2 */
+ /* if this is not cramfs assume jffs2 */
size = jffs2_1pass_load((char *)offset, part, filename);
}
@@ -1941,10 +1928,8 @@
/* check partition type for cramfs */
if (cramfs_check(part)) {
ret = cramfs_ls (part, filename);
- } else if (romfs_check(part)) {
- ret = romfs_ls (part, filename);
} else {
- /* if this is not cramfs or romfs assume jffs2 */
+ /* if this is not cramfs assume jffs2 */
ret = jffs2_1pass_ls(part, filename);
}
@@ -1966,6 +1951,7 @@
int do_jffs2_fsinfo(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
struct part_info *part;
+ char *fsname;
int ret;
/* make sure we are in sync with env variables */
@@ -1975,17 +1961,13 @@
if ((part = jffs2_part_info(current_dev, current_partnum))){
/* check partition type for cramfs */
- puts("### filesystem type is ");
+ fsname = (cramfs_check(part) ? "CRAMFS" : "JFFS2");
+ printf("### filesystem type is %s\n", fsname);
if (cramfs_check(part)) {
- puts("CRAMFS\n");
ret = cramfs_info (part);
- } else if (romfs_check(part)) {
- puts("ROMFS\n");
- ret = romfs_info (part);
} else {
- /* if this is not cramfs or romfs assume jffs2 */
- puts("JFFS2\n");
+ /* if this is not cramfs assume jffs2 */
ret = jffs2_1pass_info(part);
}
diff --git a/common/cmd_mfsl.c b/common/cmd_mfsl.c
index 93cc873..8d4c1a3 100644
--- a/common/cmd_mfsl.c
+++ b/common/cmd_mfsl.c
@@ -357,7 +357,7 @@
reg = (unsigned int)simple_strtoul (argv[1], NULL, 16);
val = (unsigned int)simple_strtoul (argv[2], NULL, 16);
- if (argc < 2) {
+ if (argc < 1) {
printf ("Usage:\n%s\n", cmdtp->usage);
return 1;
}
@@ -382,7 +382,6 @@
puts ("ESR");
break;
default:
- puts ("Unsupported register\n");
return 1;
}
printf (": 0x%08lx\n", val);
@@ -409,10 +408,10 @@
" 3 - blocking control write\n");
U_BOOT_CMD (rspr, 3, 1, do_rspr,
- "rspr - read/write special purpose register\n",
+ "rmsr - read/write special purpose register\n",
"- reg_num [write value] read/write special purpose register\n"
- " 1 - MSR - Machine status register\n"
- " 3 - EAR - Exception address register\n"
- " 5 - ESR - Exception status register\n");
+ " 0 - MSR - Machine status register\n"
+ " 1 - EAR - Exception address register\n"
+ " 2 - ESR - Exception status register\n");
#endif
diff --git a/cpu/microblaze/cache.c b/cpu/microblaze/cache.c
index 4b7866f..6ce0b55 100644
--- a/cpu/microblaze/cache.c
+++ b/cpu/microblaze/cache.c
@@ -1,7 +1,7 @@
/*
* (C) Copyright 2007 Michal Simek
*
- * Michal SIMEK <monstr@monstr.eu>
+ * Michal SIMEK <moonstr@monstr.eu>
*
* See file CREDITS for list of people who contributed to this
* project.
diff --git a/cpu/microblaze/start.S b/cpu/microblaze/start.S
index 8740284..3c027ff 100644
--- a/cpu/microblaze/start.S
+++ b/cpu/microblaze/start.S
@@ -33,13 +33,15 @@
addi r1, r0, CFG_INIT_SP_OFFSET
addi r1, r1, -4 /* Decrement SP to top of memory */
/* add opcode instruction for 32bit jump - 2 instruction imm & brai*/
- addi r6, r0, 0xb0000000 /* hex b000 opcode imm */
+ addi r6, r0, 0xb000 /* hex b000 opcode imm */
+ bslli r6, r6, 16 /* shift */
swi r6, r0, 0x0 /* reset address */
swi r6, r0, 0x8 /* user vector exception */
swi r6, r0, 0x10 /* interrupt */
swi r6, r0, 0x20 /* hardware exception */
- addi r6, r0, 0xb8080000 /* hew b808 opcode brai*/
+ addi r6, r0, 0xb808 /* hew b808 opcode brai*/
+ bslli r6, r6, 16
swi r6, r0, 0x4 /* reset address */
swi r6, r0, 0xC /* user vector exception */
swi r6, r0, 0x14 /* interrupt */
diff --git a/cpu/microblaze/timer.c b/cpu/microblaze/timer.c
index b350453..ab1cb12 100644
--- a/cpu/microblaze/timer.c
+++ b/cpu/microblaze/timer.c
@@ -33,17 +33,10 @@
timestamp = 0;
}
-#ifdef CFG_TIMER_0
ulong get_timer (ulong base)
{
return (timestamp - base);
}
-#else
-ulong get_timer (ulong base)
-{
- return (timestamp++ - base);
-}
-#endif
void set_timer (ulong t)
{
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 0639859..37d69b9 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -24,7 +24,8 @@
include $(TOPDIR)/config.mk
LIB := $(obj)libnet.a
-COBJS := mcffec.o xilinx_emac.o xilinx_emaclite.o
+
+COBJS := mcffec.o
SRCS := $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
diff --git a/drivers/net/xilinx_emac.c b/drivers/net/xilinx_emac.c
deleted file mode 100644
index 36e627a..0000000
--- a/drivers/net/xilinx_emac.c
+++ /dev/null
@@ -1,374 +0,0 @@
-/*
- * (C) Copyright 2007 Michal Simek
- *
- * Michal SIMEK <monstr@monstr.eu>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- * Based on Xilinx drivers
- *
- */
-
-#include <config.h>
-#include <common.h>
-#include <net.h>
-#include <asm/io.h>
-#include "xilinx_emac.h"
-
-#ifdef XILINX_EMAC
-
-#undef DEBUG
-
-#define ENET_MAX_MTU PKTSIZE
-#define ENET_ADDR_LENGTH 6
-
-static unsigned int etherrxbuff[PKTSIZE_ALIGN/4]; /* Receive buffer */
-
-static u8 emacaddr[ENET_ADDR_LENGTH] = { 0x00, 0x0a, 0x35, 0x00, 0x22, 0x01 };
-
-static xemac emac;
-
-void eth_halt(void)
-{
-#ifdef DEBUG
- puts ("eth_halt\n");
-#endif
-}
-
-int eth_init(bd_t * bis)
-{
- u32 helpreg;
-#ifdef DEBUG
- printf("EMAC Initialization Started\n\r");
-#endif
- if (emac.isstarted) {
- puts("Emac is started\n");
- return 0;
- }
-
- memset (&emac, 0, sizeof (xemac));
-
- emac.baseaddress = XILINX_EMAC_BASEADDR;
-
- /* Setting up FIFOs */
- emac.recvfifo.regbaseaddress = emac.baseaddress +
- XEM_PFIFO_RXREG_OFFSET;
- emac.recvfifo.databaseaddress = emac.baseaddress +
- XEM_PFIFO_RXDATA_OFFSET;
- out_be32 (emac.recvfifo.regbaseaddress, XPF_RESET_FIFO_MASK);
-
- emac.sendfifo.regbaseaddress = emac.baseaddress +
- XEM_PFIFO_TXREG_OFFSET;
- emac.sendfifo.databaseaddress = emac.baseaddress +
- XEM_PFIFO_TXDATA_OFFSET;
- out_be32 (emac.sendfifo.regbaseaddress, XPF_RESET_FIFO_MASK);
-
- /* Reset the entire IPIF */
- out_be32 (emac.baseaddress + XIIF_V123B_RESETR_OFFSET,
- XIIF_V123B_RESET_MASK);
-
- /* Stopping EMAC for setting up MAC */
- helpreg = in_be32 (emac.baseaddress + XEM_ECR_OFFSET);
- helpreg &= ~(XEM_ECR_XMIT_ENABLE_MASK | XEM_ECR_RECV_ENABLE_MASK);
- out_be32 (emac.baseaddress + XEM_ECR_OFFSET, helpreg);
-
- if (!getenv("ethaddr")) {
- memcpy(bis->bi_enetaddr, emacaddr, ENET_ADDR_LENGTH);
- }
-
- /* Set the device station address high and low registers */
- helpreg = (bis->bi_enetaddr[0] << 8) | bis->bi_enetaddr[1];
- out_be32 (emac.baseaddress + XEM_SAH_OFFSET, helpreg);
- helpreg = (bis->bi_enetaddr[2] << 24) | (bis->bi_enetaddr[3] << 16) |
- (bis->bi_enetaddr[4] << 8) | bis->bi_enetaddr[5];
- out_be32 (emac.baseaddress + XEM_SAL_OFFSET, helpreg);
-
-
- helpreg = XEM_ECR_UNICAST_ENABLE_MASK | XEM_ECR_BROAD_ENABLE_MASK |
- XEM_ECR_FULL_DUPLEX_MASK | XEM_ECR_XMIT_FCS_ENABLE_MASK |
- XEM_ECR_XMIT_PAD_ENABLE_MASK | XEM_ECR_PHY_ENABLE_MASK;
- out_be32 (emac.baseaddress + XEM_ECR_OFFSET, helpreg);
-
- emac.isstarted = 1;
-
- /* Enable the transmitter, and receiver */
- helpreg = in_be32 (emac.baseaddress + XEM_ECR_OFFSET);
- helpreg &= ~(XEM_ECR_XMIT_RESET_MASK | XEM_ECR_RECV_RESET_MASK);
- helpreg |= (XEM_ECR_XMIT_ENABLE_MASK | XEM_ECR_RECV_ENABLE_MASK);
- out_be32 (emac.baseaddress + XEM_ECR_OFFSET, helpreg);
-
- printf("EMAC Initialization complete\n\r");
- return 0;
-}
-
-int eth_send(volatile void *ptr, int len)
-{
- u32 intrstatus;
- u32 xmitstatus;
- u32 fifocount;
- u32 wordcount;
- u32 extrabytecount;
- u32 *wordbuffer = (u32 *) ptr;
-
- if (len > ENET_MAX_MTU)
- len = ENET_MAX_MTU;
-
- /*
- * Check for overruns and underruns for the transmit status and length
- * FIFOs and make sure the send packet FIFO is not deadlocked.
- * Any of these conditions is bad enough that we do not want to
- * continue. The upper layer software should reset the device to resolve
- * the error.
- */
- intrstatus = in_be32 ((emac.baseaddress) + XIIF_V123B_IISR_OFFSET);
- if (intrstatus & (XEM_EIR_XMIT_SFIFO_OVER_MASK |
- XEM_EIR_XMIT_LFIFO_OVER_MASK)) {
-#ifdef DEBUG
- puts ("Transmitting overrun error\n");
-#endif
- return 0;
- } else if (intrstatus & (XEM_EIR_XMIT_SFIFO_UNDER_MASK |
- XEM_EIR_XMIT_LFIFO_UNDER_MASK)) {
-#ifdef DEBUG
- puts ("Transmitting underrun error\n");
-#endif
- return 0;
- } else if (in_be32 (emac.sendfifo.regbaseaddress +
- XPF_COUNT_STATUS_REG_OFFSET) & XPF_DEADLOCK_MASK) {
-#ifdef DEBUG
- puts("Transmitting fifo error\n");
-#endif
- return 0;
- }
-
- /*
- * Before writing to the data FIFO, make sure the length FIFO is not
- * full. The data FIFO might not be full yet even though the length FIFO
- * is. This avoids an overrun condition on the length FIFO and keeps the
- * FIFOs in sync.
- *
- * Clear the latched LFIFO_FULL bit so next time around the most
- * current status is represented
- */
- if (intrstatus & XEM_EIR_XMIT_LFIFO_FULL_MASK) {
- out_be32 ((emac.baseaddress) + XIIF_V123B_IISR_OFFSET,
- intrstatus & XEM_EIR_XMIT_LFIFO_FULL_MASK);
-#ifdef DEBUG
- puts ("Fifo is full\n");
-#endif
- return 0;
- }
-
- /* get the count of how many words may be inserted into the FIFO */
- fifocount = in_be32 (emac.sendfifo.regbaseaddress +
- XPF_COUNT_STATUS_REG_OFFSET) & XPF_COUNT_MASK;
- wordcount = len >> 2;
- extrabytecount = len & 0x3;
-
- if (fifocount < wordcount) {
-#ifdef DEBUG
- puts ("Sending packet is larger then size of FIFO\n");
-#endif
- return 0;
- }
-
- for (fifocount = 0; fifocount < wordcount; fifocount++) {
- out_be32 (emac.sendfifo.databaseaddress, wordbuffer[fifocount]);
- }
- if (extrabytecount > 0) {
- u32 lastword = 0;
- u8 *extrabytesbuffer = (u8 *) (wordbuffer + wordcount);
-
- if (extrabytecount == 1) {
- lastword = extrabytesbuffer[0] << 24;
- } else if (extrabytecount == 2) {
- lastword = extrabytesbuffer[0] << 24 |
- extrabytesbuffer[1] << 16;
- } else if (extrabytecount == 3) {
- lastword = extrabytesbuffer[0] << 24 |
- extrabytesbuffer[1] << 16 |
- extrabytesbuffer[2] << 8;
- }
- out_be32 (emac.sendfifo.databaseaddress, lastword);
- }
-
- /* Loop on the MAC's status to wait for any pause to complete */
- intrstatus = in_be32 ((emac.baseaddress) + XIIF_V123B_IISR_OFFSET);
- while ((intrstatus & XEM_EIR_XMIT_PAUSE_MASK) != 0) {
- intrstatus = in_be32 ((emac.baseaddress) +
- XIIF_V123B_IISR_OFFSET);
- /* Clear the pause status from the transmit status register */
- out_be32 ((emac.baseaddress) + XIIF_V123B_IISR_OFFSET,
- intrstatus & XEM_EIR_XMIT_PAUSE_MASK);
- }
-
- /*
- * Set the MAC's transmit packet length register to tell it to transmit
- */
- out_be32 (emac.baseaddress + XEM_TPLR_OFFSET, len);
-
- /*
- * Loop on the MAC's status to wait for the transmit to complete.
- * The transmit status is in the FIFO when the XMIT_DONE bit is set.
- */
- do {
- intrstatus = in_be32 ((emac.baseaddress) +
- XIIF_V123B_IISR_OFFSET);
- }
- while ((intrstatus & XEM_EIR_XMIT_DONE_MASK) == 0);
-
- xmitstatus = in_be32 (emac.baseaddress + XEM_TSR_OFFSET);
-
- if (intrstatus & (XEM_EIR_XMIT_SFIFO_OVER_MASK |
- XEM_EIR_XMIT_LFIFO_OVER_MASK)) {
-#ifdef DEBUG
- puts ("Transmitting overrun error\n");
-#endif
- return 0;
- } else if (intrstatus & (XEM_EIR_XMIT_SFIFO_UNDER_MASK |
- XEM_EIR_XMIT_LFIFO_UNDER_MASK)) {
-#ifdef DEBUG
- puts ("Transmitting underrun error\n");
-#endif
- return 0;
- }
-
- /* Clear the interrupt status register of transmit statuses */
- out_be32 ((emac.baseaddress) + XIIF_V123B_IISR_OFFSET,
- intrstatus & XEM_EIR_XMIT_ALL_MASK);
-
- /*
- * Collision errors are stored in the transmit status register
- * instead of the interrupt status register
- */
- if ((xmitstatus & XEM_TSR_EXCESS_DEFERRAL_MASK) ||
- (xmitstatus & XEM_TSR_LATE_COLLISION_MASK)) {
-#ifdef DEBUG
- puts ("Transmitting collision error\n");
-#endif
- return 0;
- }
- return 1;
-}
-
-int eth_rx(void)
-{
- u32 pktlength;
- u32 intrstatus;
- u32 fifocount;
- u32 wordcount;
- u32 extrabytecount;
- u32 lastword;
- u8 *extrabytesbuffer;
-
- if (in_be32 (emac.recvfifo.regbaseaddress + XPF_COUNT_STATUS_REG_OFFSET)
- & XPF_DEADLOCK_MASK) {
- out_be32 (emac.recvfifo.regbaseaddress, XPF_RESET_FIFO_MASK);
-#ifdef DEBUG
- puts ("Receiving FIFO deadlock\n");
-#endif
- return 0;
- }
-
- /*
- * Get the interrupt status to know what happened (whether an error
- * occurred and/or whether frames have been received successfully).
- * When clearing the intr status register, clear only statuses that
- * pertain to receive.
- */
- intrstatus = in_be32 ((emac.baseaddress) + XIIF_V123B_IISR_OFFSET);
- /*
- * Before reading from the length FIFO, make sure the length FIFO is not
- * empty. We could cause an underrun error if we try to read from an
- * empty FIFO.
- */
- if (!(intrstatus & XEM_EIR_RECV_DONE_MASK)) {
-#ifdef DEBUG
- /* puts("Receiving FIFO is empty\n"); */
-#endif
- return 0;
- }
-
- /*
- * Determine, from the MAC, the length of the next packet available
- * in the data FIFO (there should be a non-zero length here)
- */
- pktlength = in_be32 (emac.baseaddress + XEM_RPLR_OFFSET);
- if (!pktlength) {
- return 0;
- }
-
- /*
- * Write the RECV_DONE bit in the status register to clear it. This bit
- * indicates the RPLR is non-empty, and we know it's set at this point.
- * We clear it so that subsequent entry into this routine will reflect
- * the current status. This is done because the non-empty bit is latched
- * in the IPIF, which means it may indicate a non-empty condition even
- * though there is something in the FIFO.
- */
- out_be32 ((emac.baseaddress) + XIIF_V123B_IISR_OFFSET,
- XEM_EIR_RECV_DONE_MASK);
-
- fifocount = in_be32 (emac.recvfifo.regbaseaddress +
- XPF_COUNT_STATUS_REG_OFFSET) & XPF_COUNT_MASK;
-
- if ((fifocount * 4) < pktlength) {
-#ifdef DEBUG
- puts ("Receiving FIFO is smaller than packet size.\n");
-#endif
- return 0;
- }
-
- wordcount = pktlength >> 2;
- extrabytecount = pktlength & 0x3;
-
- for (fifocount = 0; fifocount < wordcount; fifocount++) {
- etherrxbuff[fifocount] =
- in_be32 (emac.recvfifo.databaseaddress);
- }
-
- /*
- * if there are extra bytes to handle, read the last word from the FIFO
- * and insert the extra bytes into the buffer
- */
- if (extrabytecount > 0) {
- extrabytesbuffer = (u8 *) (etherrxbuff + wordcount);
-
- lastword = in_be32 (emac.recvfifo.databaseaddress);
-
- /*
- * one extra byte in the last word, put the byte into the next
- * location of the buffer, bytes in a word of the FIFO are
- * ordered from most significant byte to least
- */
- if (extrabytecount == 1) {
- extrabytesbuffer[0] = (u8) (lastword >> 24);
- } else if (extrabytecount == 2) {
- extrabytesbuffer[0] = (u8) (lastword >> 24);
- extrabytesbuffer[1] = (u8) (lastword >> 16);
- } else if (extrabytecount == 3) {
- extrabytesbuffer[0] = (u8) (lastword >> 24);
- extrabytesbuffer[1] = (u8) (lastword >> 16);
- extrabytesbuffer[2] = (u8) (lastword >> 8);
- }
- }
- NetReceive((uchar *)etherrxbuff, pktlength);
- return 1;
-}
-#endif
diff --git a/drivers/net/xilinx_emac.h b/drivers/net/xilinx_emac.h
deleted file mode 100644
index 966598e..0000000
--- a/drivers/net/xilinx_emac.h
+++ /dev/null
@@ -1,148 +0,0 @@
-/*
- * (C) Copyright 2007 Michal Simek
- *
- * Michal SIMEK <monstr@monstr.eu>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- * Based on Xilinx drivers
- *
- */
-
-typedef struct {
- u32 regbaseaddress; /* Base address of registers */
- u32 databaseaddress; /* Base address of data for FIFOs */
-} xpacketfifov100b;
-
-typedef struct {
- u32 baseaddress; /* Base address (of IPIF) */
- u32 isstarted; /* Device is currently started 0-no, 1-yes */
- xpacketfifov100b recvfifo; /* FIFO used to receive frames */
- xpacketfifov100b sendfifo; /* FIFO used to send frames */
-} xemac;
-
-#define XIIF_V123B_IISR_OFFSET 32UL /* IP interrupt status register */
-#define XIIF_V123B_RESET_MASK 0xAUL
-#define XIIF_V123B_RESETR_OFFSET 64UL /* reset register */
-
-/* This constant is used with the Reset Register */
-#define XPF_RESET_FIFO_MASK 0x0000000A
-#define XPF_COUNT_STATUS_REG_OFFSET 4UL
-
-/* These constants are used with the Occupancy/Vacancy Count Register. This
- * register also contains FIFO status */
-#define XPF_COUNT_MASK 0x0000FFFF
-#define XPF_DEADLOCK_MASK 0x20000000
-
-/* Offset of the MAC registers from the IPIF base address */
-#define XEM_REG_OFFSET 0x1100UL
-
-/*
- * Register offsets for the Ethernet MAC. Each register is 32 bits.
- */
-#define XEM_ECR_OFFSET (XEM_REG_OFFSET + 0x4) /* MAC Control */
-#define XEM_SAH_OFFSET (XEM_REG_OFFSET + 0xC) /* Station addr, high */
-#define XEM_SAL_OFFSET (XEM_REG_OFFSET + 0x10) /* Station addr, low */
-#define XEM_RPLR_OFFSET (XEM_REG_OFFSET + 0x1C) /* Rx packet length */
-#define XEM_TPLR_OFFSET (XEM_REG_OFFSET + 0x20) /* Tx packet length */
-#define XEM_TSR_OFFSET (XEM_REG_OFFSET + 0x24) /* Tx status */
-
-
-
-#define XEM_PFIFO_OFFSET 0x2000UL
-/* Tx registers */
-#define XEM_PFIFO_TXREG_OFFSET (XEM_PFIFO_OFFSET + 0x0)
-/* Rx registers */
-#define XEM_PFIFO_RXREG_OFFSET (XEM_PFIFO_OFFSET + 0x10)
-/* Tx keyhole */
-#define XEM_PFIFO_TXDATA_OFFSET (XEM_PFIFO_OFFSET + 0x100)
-/* Rx keyhole */
-#define XEM_PFIFO_RXDATA_OFFSET (XEM_PFIFO_OFFSET + 0x200)
-
-
-/*
- * EMAC Interrupt Registers (Status and Enable) masks. These registers are
- * part of the IPIF IP Interrupt registers
- */
-/* A mask for all transmit interrupts, used in polled mode */
-#define XEM_EIR_XMIT_ALL_MASK (XEM_EIR_XMIT_DONE_MASK |\
- XEM_EIR_XMIT_ERROR_MASK | \
- XEM_EIR_XMIT_SFIFO_EMPTY_MASK |\
- XEM_EIR_XMIT_LFIFO_FULL_MASK)
-
-/* Xmit complete */
-#define XEM_EIR_XMIT_DONE_MASK 0x00000001UL
-/* Recv complete */
-#define XEM_EIR_RECV_DONE_MASK 0x00000002UL
-/* Xmit error */
-#define XEM_EIR_XMIT_ERROR_MASK 0x00000004UL
-/* Recv error */
-#define XEM_EIR_RECV_ERROR_MASK 0x00000008UL
-/* Xmit status fifo empty */
-#define XEM_EIR_XMIT_SFIFO_EMPTY_MASK 0x00000010UL
-/* Recv length fifo empty */
-#define XEM_EIR_RECV_LFIFO_EMPTY_MASK 0x00000020UL
-/* Xmit length fifo full */
-#define XEM_EIR_XMIT_LFIFO_FULL_MASK 0x00000040UL
-/* Recv length fifo overrun */
-#define XEM_EIR_RECV_LFIFO_OVER_MASK 0x00000080UL
-/* Recv length fifo underrun */
-#define XEM_EIR_RECV_LFIFO_UNDER_MASK 0x00000100UL
-/* Xmit status fifo overrun */
-#define XEM_EIR_XMIT_SFIFO_OVER_MASK 0x00000200UL
-/* Transmit status fifo underrun */
-#define XEM_EIR_XMIT_SFIFO_UNDER_MASK 0x00000400UL
-/* Transmit length fifo overrun */
-#define XEM_EIR_XMIT_LFIFO_OVER_MASK 0x00000800UL
-/* Transmit length fifo underrun */
-#define XEM_EIR_XMIT_LFIFO_UNDER_MASK 0x00001000UL
-/* Transmit pause pkt received */
-#define XEM_EIR_XMIT_PAUSE_MASK 0x00002000UL
-
-/*
- * EMAC Control Register (ECR)
- */
-/* Full duplex mode */
-#define XEM_ECR_FULL_DUPLEX_MASK 0x80000000UL
-/* Reset transmitter */
-#define XEM_ECR_XMIT_RESET_MASK 0x40000000UL
-/* Enable transmitter */
-#define XEM_ECR_XMIT_ENABLE_MASK 0x20000000UL
-/* Reset receiver */
-#define XEM_ECR_RECV_RESET_MASK 0x10000000UL
-/* Enable receiver */
-#define XEM_ECR_RECV_ENABLE_MASK 0x08000000UL
-/* Enable PHY */
-#define XEM_ECR_PHY_ENABLE_MASK 0x04000000UL
-/* Enable xmit pad insert */
-#define XEM_ECR_XMIT_PAD_ENABLE_MASK 0x02000000UL
-/* Enable xmit FCS insert */
-#define XEM_ECR_XMIT_FCS_ENABLE_MASK 0x01000000UL
-/* Enable unicast addr */
-#define XEM_ECR_UNICAST_ENABLE_MASK 0x00020000UL
-/* Enable broadcast addr */
-#define XEM_ECR_BROAD_ENABLE_MASK 0x00008000UL
-
-/*
- * Transmit Status Register (TSR)
- */
-/* Transmit excess deferral */
-#define XEM_TSR_EXCESS_DEFERRAL_MASK 0x80000000UL
-/* Transmit late collision */
-#define XEM_TSR_LATE_COLLISION_MASK 0x01000000UL
diff --git a/drivers/net/xilinx_emaclite.c b/drivers/net/xilinx_emaclite.c
deleted file mode 100644
index 5d8eaa5..0000000
--- a/drivers/net/xilinx_emaclite.c
+++ /dev/null
@@ -1,376 +0,0 @@
-/*
- * (C) Copyright 2007 Michal Simek
- *
- * Michal SIMEK <monstr@monstr.eu>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <net.h>
-#include <config.h>
-#include <asm/io.h>
-
-#ifdef XILINX_EMACLITE_BASEADDR
-
-#undef DEBUG
-
-#define ENET_MAX_MTU PKTSIZE
-#define ENET_MAX_MTU_ALIGNED PKTSIZE_ALIGN
-#define ENET_ADDR_LENGTH 6
-
-/* EmacLite constants */
-#define XEL_BUFFER_OFFSET 0x0800 /* Next buffer's offset */
-#define XEL_TPLR_OFFSET 0x07F4 /* Tx packet length */
-#define XEL_TSR_OFFSET 0x07FC /* Tx status */
-#define XEL_RSR_OFFSET 0x17FC /* Rx status */
-#define XEL_RXBUFF_OFFSET 0x1000 /* Receive Buffer */
-
-/* Xmit complete */
-#define XEL_TSR_XMIT_BUSY_MASK 0x00000001UL
-/* Xmit interrupt enable bit */
-#define XEL_TSR_XMIT_IE_MASK 0x00000008UL
-/* Buffer is active, SW bit only */
-#define XEL_TSR_XMIT_ACTIVE_MASK 0x80000000UL
-/* Program the MAC address */
-#define XEL_TSR_PROGRAM_MASK 0x00000002UL
-/* define for programming the MAC address into the EMAC Lite */
-#define XEL_TSR_PROG_MAC_ADDR (XEL_TSR_XMIT_BUSY_MASK | XEL_TSR_PROGRAM_MASK)
-
-/* Transmit packet length upper byte */
-#define XEL_TPLR_LENGTH_MASK_HI 0x0000FF00UL
-/* Transmit packet length lower byte */
-#define XEL_TPLR_LENGTH_MASK_LO 0x000000FFUL
-
-/* Recv complete */
-#define XEL_RSR_RECV_DONE_MASK 0x00000001UL
-/* Recv interrupt enable bit */
-#define XEL_RSR_RECV_IE_MASK 0x00000008UL
-
-typedef struct {
- unsigned int baseaddress; /* Base address for device (IPIF) */
- unsigned int nexttxbuffertouse; /* Next TX buffer to write to */
- unsigned int nextrxbuffertouse; /* Next RX buffer to read from */
- unsigned char deviceid; /* Unique ID of device - for future */
-} xemaclite;
-
-static xemaclite emaclite;
-
-static char etherrxbuff[PKTSIZE_ALIGN/4]; /* Receive buffer */
-
-/* hardcoded MAC address for the Xilinx EMAC Core when env is nowhere*/
-#ifdef CFG_ENV_IS_NOWHERE
-static u8 emacaddr[ENET_ADDR_LENGTH] = { 0x00, 0x0a, 0x35, 0x00, 0x22, 0x01 };
-#endif
-
-void xemaclite_alignedread (u32 * srcptr, void *destptr, unsigned bytecount)
-{
- unsigned int i;
- u32 alignbuffer;
- u32 *to32ptr;
- u32 *from32ptr;
- u8 *to8ptr;
- u8 *from8ptr;
-
- from32ptr = (u32 *) srcptr;
-
- /* Word aligned buffer, no correction needed. */
- to32ptr = (u32 *) destptr;
- while (bytecount > 3) {
- *to32ptr++ = *from32ptr++;
- bytecount -= 4;
- }
- to8ptr = (u8 *) to32ptr;
-
- alignbuffer = *from32ptr++;
- from8ptr = (u8 *) & alignbuffer;
-
- for (i = 0; i < bytecount; i++) {
- *to8ptr++ = *from8ptr++;
- }
-}
-
-void xemaclite_alignedwrite (void *srcptr, u32 destptr, unsigned bytecount)
-{
- unsigned i;
- u32 alignbuffer;
- u32 *to32ptr = (u32 *) destptr;
- u32 *from32ptr;
- u8 *to8ptr;
- u8 *from8ptr;
-
- from32ptr = (u32 *) srcptr;
- while (bytecount > 3) {
-
- *to32ptr++ = *from32ptr++;
- bytecount -= 4;
- }
-
- alignbuffer = 0;
- to8ptr = (u8 *) & alignbuffer;
- from8ptr = (u8 *) from32ptr;
-
- for (i = 0; i < bytecount; i++) {
- *to8ptr++ = *from8ptr++;
- }
-
- *to32ptr++ = alignbuffer;
-}
-
-void eth_halt (void)
-{
-#ifdef DEBUG
- puts ("eth_halt\n");
-#endif
-}
-
-int eth_init (bd_t * bis)
-{
-#ifdef DEBUG
- puts ("EmacLite Initialization Started\n");
-#endif
- memset (&emaclite, 0, sizeof (xemaclite));
- emaclite.baseaddress = XILINX_EMACLITE_BASEADDR;
-
- if (!getenv("ethaddr")) {
- memcpy(bis->bi_enetaddr, emacaddr, ENET_ADDR_LENGTH);
- }
-
-/*
- * TX - TX_PING & TX_PONG initialization
- */
- /* Restart PING TX */
- out_be32 (emaclite.baseaddress + XEL_TSR_OFFSET, 0);
- /* Copy MAC address */
- xemaclite_alignedwrite (bis->bi_enetaddr,
- emaclite.baseaddress, ENET_ADDR_LENGTH);
- /* Set the length */
- out_be32 (emaclite.baseaddress + XEL_TPLR_OFFSET, ENET_ADDR_LENGTH);
- /* Update the MAC address in the EMAC Lite */
- out_be32 (emaclite.baseaddress + XEL_TSR_OFFSET, XEL_TSR_PROG_MAC_ADDR);
- /* Wait for EMAC Lite to finish with the MAC address update */
- while ((in_be32 (emaclite.baseaddress + XEL_TSR_OFFSET) &
- XEL_TSR_PROG_MAC_ADDR) != 0) ;
-
-#ifdef XILINX_EMACLITE_TX_PING_PONG
- /* The same operation with PONG TX */
- out_be32 (emaclite.baseaddress + XEL_TSR_OFFSET + XEL_BUFFER_OFFSET, 0);
- xemaclite_alignedwrite (bis->bi_enetaddr, emaclite.baseaddress +
- XEL_BUFFER_OFFSET, ENET_ADDR_LENGTH);
- out_be32 (emaclite.baseaddress + XEL_TPLR_OFFSET, ENET_ADDR_LENGTH);
- out_be32 (emaclite.baseaddress + XEL_TSR_OFFSET + XEL_BUFFER_OFFSET,
- XEL_TSR_PROG_MAC_ADDR);
- while ((in_be32 (emaclite.baseaddress + XEL_TSR_OFFSET +
- XEL_BUFFER_OFFSET) & XEL_TSR_PROG_MAC_ADDR) != 0) ;
-#endif
-
-/*
- * RX - RX_PING & RX_PONG initialization
- */
- /* Write out the value to flush the RX buffer */
- out_be32 (emaclite.baseaddress + XEL_RSR_OFFSET, XEL_RSR_RECV_IE_MASK);
-#ifdef XILINX_EMACLITE_RX_PING_PONG
- out_be32 (emaclite.baseaddress + XEL_RSR_OFFSET + XEL_BUFFER_OFFSET,
- XEL_RSR_RECV_IE_MASK);
-#endif
-
-#ifdef DEBUG
- puts ("EmacLite Initialization complete\n");
-#endif
- return 0;
-}
-
-int xemaclite_txbufferavailable (xemaclite * instanceptr)
-{
- u32 reg;
- u32 txpingbusy;
- u32 txpongbusy;
- /*
- * Read the other buffer register
- * and determine if the other buffer is available
- */
- reg = in_be32 (instanceptr->baseaddress +
- instanceptr->nexttxbuffertouse + 0);
- txpingbusy = ((reg & XEL_TSR_XMIT_BUSY_MASK) ==
- XEL_TSR_XMIT_BUSY_MASK);
-
- reg = in_be32 (instanceptr->baseaddress +
- (instanceptr->nexttxbuffertouse ^ XEL_TSR_OFFSET) + 0);
- txpongbusy = ((reg & XEL_TSR_XMIT_BUSY_MASK) ==
- XEL_TSR_XMIT_BUSY_MASK);
-
- return (!(txpingbusy && txpongbusy));
-}
-
-int eth_send (volatile void *ptr, int len) {
-
- unsigned int reg;
- unsigned int baseaddress;
-
- unsigned maxtry = 1000;
-
- if (len > ENET_MAX_MTU)
- len = ENET_MAX_MTU;
-
- while (!xemaclite_txbufferavailable (&emaclite) && maxtry) {
- udelay (10);
- maxtry--;
- }
-
- if (!maxtry) {
- printf ("Error: Timeout waiting for ethernet TX buffer\n");
- /* Restart PING TX */
- out_be32 (emaclite.baseaddress + XEL_TSR_OFFSET, 0);
-#ifdef XILINX_EMACLITE_TX_PING_PONG
- out_be32 (emaclite.baseaddress + XEL_TSR_OFFSET +
- XEL_BUFFER_OFFSET, 0);
-#endif
- return 0;
- }
-
- /* Determine the expected TX buffer address */
- baseaddress = (emaclite.baseaddress + emaclite.nexttxbuffertouse);
-
- /* Determine if the expected buffer address is empty */
- reg = in_be32 (baseaddress + XEL_TSR_OFFSET);
- if (((reg & XEL_TSR_XMIT_BUSY_MASK) == 0)
- && ((in_be32 ((baseaddress) + XEL_TSR_OFFSET)
- & XEL_TSR_XMIT_ACTIVE_MASK) == 0)) {
-
-#ifdef XILINX_EMACLITE_TX_PING_PONG
- emaclite.nexttxbuffertouse ^= XEL_BUFFER_OFFSET;
-#endif
-#ifdef DEBUG
- printf ("Send packet from 0x%x\n", baseaddress);
-#endif
- /* Write the frame to the buffer */
- xemaclite_alignedwrite ((void *) ptr, baseaddress, len);
- out_be32 (baseaddress + XEL_TPLR_OFFSET,(len &
- (XEL_TPLR_LENGTH_MASK_HI | XEL_TPLR_LENGTH_MASK_LO)));
- reg = in_be32 (baseaddress + XEL_TSR_OFFSET);
- reg |= XEL_TSR_XMIT_BUSY_MASK;
- if ((reg & XEL_TSR_XMIT_IE_MASK) != 0) {
- reg |= XEL_TSR_XMIT_ACTIVE_MASK;
- }
- out_be32 (baseaddress + XEL_TSR_OFFSET, reg);
- return 1;
- }
-#ifdef XILINX_EMACLITE_TX_PING_PONG
- /* Switch to second buffer */
- baseaddress ^= XEL_BUFFER_OFFSET;
- /* Determine if the expected buffer address is empty */
- reg = in_be32 (baseaddress + XEL_TSR_OFFSET);
- if (((reg & XEL_TSR_XMIT_BUSY_MASK) == 0)
- && ((in_be32 ((baseaddress) + XEL_TSR_OFFSET)
- & XEL_TSR_XMIT_ACTIVE_MASK) == 0)) {
-#ifdef DEBUG
- printf ("Send packet from 0x%x\n", baseaddress);
-#endif
- /* Write the frame to the buffer */
- xemaclite_alignedwrite ((void *) ptr, baseaddress, len);
- out_be32 (baseaddress + XEL_TPLR_OFFSET,(len &
- (XEL_TPLR_LENGTH_MASK_HI | XEL_TPLR_LENGTH_MASK_LO)));
- reg = in_be32 (baseaddress + XEL_TSR_OFFSET);
- reg |= XEL_TSR_XMIT_BUSY_MASK;
- if ((reg & XEL_TSR_XMIT_IE_MASK) != 0) {
- reg |= XEL_TSR_XMIT_ACTIVE_MASK;
- }
- out_be32 (baseaddress + XEL_TSR_OFFSET, reg);
- return 1;
- }
-#endif
- puts ("Error while sending frame\n");
- return 0;
-}
-
-int eth_rx (void)
-{
- unsigned int length;
- unsigned int reg;
- unsigned int baseaddress;
-
- baseaddress = emaclite.baseaddress + emaclite.nextrxbuffertouse;
- reg = in_be32 (baseaddress + XEL_RSR_OFFSET);
-#ifdef DEBUG
- printf ("Testing data at address 0x%x\n", baseaddress);
-#endif
- if ((reg & XEL_RSR_RECV_DONE_MASK) == XEL_RSR_RECV_DONE_MASK) {
-#ifdef XILINX_EMACLITE_RX_PING_PONG
- emaclite.nextrxbuffertouse ^= XEL_BUFFER_OFFSET;
-#endif
- } else {
-#ifndef XILINX_EMACLITE_RX_PING_PONG
-#ifdef DEBUG
- printf ("No data was available - address 0x%x\n", baseaddress);
-#endif
- return 0;
-#else
- baseaddress ^= XEL_BUFFER_OFFSET;
- reg = in_be32 (baseaddress + XEL_RSR_OFFSET);
- if ((reg & XEL_RSR_RECV_DONE_MASK) !=
- XEL_RSR_RECV_DONE_MASK) {
-#ifdef DEBUG
- printf ("No data was available - address 0x%x\n",
- baseaddress);
-#endif
- return 0;
- }
-#endif
- }
- /* Get the length of the frame that arrived */
- switch(((in_be32 (baseaddress + XEL_RXBUFF_OFFSET + 0xC)) &
- 0xFFFF0000 ) >> 16) {
- case 0x806:
- length = 42 + 20; /* FIXME size of ARP */
-#ifdef DEBUG
- puts ("ARP Packet\n");
-#endif
- break;
- case 0x800:
- length = 14 + 14 +
- (((in_be32 (baseaddress + XEL_RXBUFF_OFFSET + 0x10)) &
- 0xFFFF0000) >> 16); /* FIXME size of IP packet */
-#ifdef DEBUG
- puts("IP Packet\n");
-#endif
- break;
- default:
-#ifdef DEBUG
- puts("Other Packet\n");
-#endif
- length = ENET_MAX_MTU;
- break;
- }
-
- xemaclite_alignedread ((u32 *) (baseaddress + XEL_RXBUFF_OFFSET),
- etherrxbuff, length);
-
- /* Acknowledge the frame */
- reg = in_be32 (baseaddress + XEL_RSR_OFFSET);
- reg &= ~XEL_RSR_RECV_DONE_MASK;
- out_be32 (baseaddress + XEL_RSR_OFFSET, reg);
-
-#ifdef DEBUG
- printf ("Packet receive from 0x%x, length %dB\n", baseaddress, length);
-#endif
- NetReceive ((uchar *) etherrxbuff, length);
- return 1;
-
-}
-#endif
diff --git a/drivers/serial_xuartlite.c b/drivers/serial_xuartlite.c
index 1f3aaae..ed59abe 100644
--- a/drivers/serial_xuartlite.c
+++ b/drivers/serial_xuartlite.c
@@ -24,7 +24,7 @@
#include <config.h>
-#ifdef XILINX_UARTLITE
+#ifdef CONFIG_MICROBLAZE
#include <asm/serial_xuartlite.h>
diff --git a/fs/Makefile b/fs/Makefile
index 118ae78..273d90e 100644
--- a/fs/Makefile
+++ b/fs/Makefile
@@ -22,7 +22,7 @@
#
#
-SUBDIRS := romfs jffs2 cramfs fdos fat reiserfs ext2
+SUBDIRS := jffs2 cramfs fdos fat reiserfs ext2
$(obj).depend all:
@for dir in $(SUBDIRS) ; do \
diff --git a/fs/romfs/Makefile b/fs/romfs/Makefile
deleted file mode 100644
index 937d755..0000000
--- a/fs/romfs/Makefile
+++ /dev/null
@@ -1,49 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)libromfs.a
-
-AOBJS =
-COBJS = romfs.o
-
-SRCS := $(AOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(AOBJS) $(COBJS))
-
-#CPPFLAGS +=
-
-all: $(LIB) $(AOBJS)
-
-$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
-
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/fs/romfs/romfs.c b/fs/romfs/romfs.c
deleted file mode 100644
index 15de3e1..0000000
--- a/fs/romfs/romfs.c
+++ /dev/null
@@ -1,240 +0,0 @@
-/*
- * (C) Copyright 2007 Michal Simek
- *
- * Michal SIMEK <monstr@monstr.eu>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <malloc.h>
-#include <command.h>
-
-#if defined(CONFIG_CMD_JFFS2)
-
-#include <asm/byteorder.h>
-#include <linux/stat.h>
-#include <jffs2/jffs2.h>
-#include <jffs2/load_kernel.h>
-
-#undef DEBUG_ROMFS
-
-/* ROMFS superblock */
-struct romfs_super {
- u32 word0;
- u32 word1;
- u32 size;
- u32 checksum;
- char name[0];
-};
-
-struct romfs_inode {
- u32 next;
- u32 spec;
- u32 size;
- u32 checksum;
- char name[0];
-};
-
-extern flash_info_t flash_info[];
-#define PART_OFFSET(x) (x->offset + flash_info[x->dev->id->num].start[0])
-#define ALIGN(x) (((x) & 0xfffffff0))
-#define HEADERSIZE(name) (0x20 + ALIGN(strlen(name)))
-
-static unsigned long romfs_resolve (unsigned long begin, unsigned long offset,
- unsigned long size, int raw, char *filename)
-{
- unsigned long inodeoffset = 0, nextoffset;
- struct romfs_inode *inode;
-#ifdef DEBUG_ROMFS
- printf ("ROMFS_resolve: begin 0x%x, offset 0x%x, size 0x%x, raw 0x%x, \
- filename %s\n", begin, offset, size, raw, filename);
-#endif
-
- while (inodeoffset < size) {
- inode = (struct romfs_inode *)(begin + offset + inodeoffset);
- offset = 0;
- nextoffset = ALIGN (inode->next);
-#ifdef DEBUG_ROMFS
- printf("inode 0x%x, name %s - len 0x%x, next inode 0x%x, \
- compare names 0x%x\n",
- inode, inode->name, strlen (inode->name), nextoffset,
- strncmp (filename, inode->name, strlen (filename)));
-#endif
- if (!strncmp (filename, inode->name, strlen (inode->name))) {
- char *p = strtok (NULL, "/");
- if (raw && (p == NULL || *p == '\0')) {
- return offset + inodeoffset;
- }
- return romfs_resolve (begin,
- inodeoffset + HEADERSIZE (inode->name),
- size, raw, p);
- }
- inodeoffset = nextoffset;
- }
-
- printf ("can't find corresponding entry\n");
- return 0;
-}
-
-int romfs_load (char *loadoffset, struct part_info *info, char *filename)
-{
- struct romfs_inode *inode;
- struct romfs_super *sb;
- char *data;
- int pocet;
- sb = (struct romfs_super *) PART_OFFSET (info);
-
- unsigned long offset;
-
- offset = romfs_resolve (PART_OFFSET (info), HEADERSIZE (sb->name),
- sb->size, 1, strtok (filename, "/"));
- if (offset <= 0)
- return offset;
-
- inode = (struct romfs_inode *)(PART_OFFSET (info) + offset);
- data = (char *)((int)inode + HEADERSIZE (inode->name));
- pocet = inode->size;
- while (pocet--) {
- *loadoffset++ = *data++;
- }
- return inode->size;
-}
-
-static int romfs_list_inode (struct part_info *info, unsigned long offset)
-{
- struct romfs_inode *inode =
- (struct romfs_inode *)(PART_OFFSET (info) + offset);
- struct romfs_inode *hardlink = NULL;
- char str[3], *data;
-
-/*
- * mapping spec.info means
- * 0 hard link link destination [file header]
- * 1 directory first file's header
- * 2 regular file unused, must be zero [MBZ]
- * 3 symbolic link unused, MBZ (file data is the link content)
- * 4 block device 16/16 bits major/minor number
- * 5 char device - " -
- * 6 socket unused, MBZ
- * 7 fifo unused, MBZ
- */
- char attributes[] = "hdflbcsp";
- str[0] = attributes[inode->next & 0x7];
- str[1] = (inode->next & 0x8) ? 'x' : '-';
- str[2] = '\0';
-
- if ((str[0] == 'b') || (str[0] == 'c')) {
-#ifdef DEBUG_ROMFS
- printf (" %s %3d,%3d %12s 0x%08x 0x%08x", str,
- (inode->spec & 0xffff0000) >> 16,
- inode->spec & 0x0000ffff, inode->name, inode,
- inode->spec);
-#else
- printf (" %s %3d,%3d %12s", str,
- (inode->spec & 0xffff0000) >> 16,
- inode->spec & 0x0000ffff);
-#endif
- } else {
-#ifdef DEBUG_ROMFS
- printf (" %s %7d %12s 0x%08x 0x%08x", str, inode->size,
- inode->name, inode, inode->spec);
-#else
- printf (" %s %7d %12s", str, inode->size, inode->name);
-#endif
- if (str[0] == 'l') {
- data = (char *)((int)inode + HEADERSIZE (inode->name));
- puts (" -> ");
- puts (data);
- }
- if (str[0] == 'h') {
- hardlink = (struct romfs_inode *)(PART_OFFSET (info) +
- inode->spec);
- puts (" -> ");
- puts (hardlink->name);
- }
- }
- puts ("\n");
- return ALIGN (inode->next);
-}
-
-int romfs_ls (struct part_info *info, char *filename)
-{
- struct romfs_inode *inode;
- unsigned long inodeoffset = 0, nextoffset;
- unsigned long offset, size;
- struct romfs_super *sb;
- sb = (struct romfs_super *)PART_OFFSET (info);
-
- if (strlen (filename) == 0 || !strcmp (filename, "/")) {
- offset = HEADERSIZE (sb->name);
- size = sb->size;
- } else {
- offset = romfs_resolve (PART_OFFSET (info),
- HEADERSIZE (sb->name), sb->size, 1,
- strtok (filename, "/"));
-
- if (offset == 0) {
- return offset;
- }
- inode = (struct romfs_inode *)(PART_OFFSET (info) + offset);
- if ((inode->next & 0x7) != 1) {
- return (romfs_list_inode (info, offset) > 0);
- }
-
- size = sb->size;
- offset = offset + HEADERSIZE (inode->name);
- }
-
- inodeoffset = offset + inodeoffset;
- while (inodeoffset < size) {
- nextoffset = romfs_list_inode (info, inodeoffset);
- if (nextoffset == 0)
- break;
- inodeoffset = nextoffset;
- }
- return 1;
-}
-
-int romfs_info (struct part_info *info)
-{
- struct romfs_super *sb;
- sb = (struct romfs_super *)PART_OFFSET (info);
-
- printf ("name: \t\t%s, len %d B\n", sb->name, strlen (sb->name));
- printf ("size of SB:\t%d B\n", HEADERSIZE (sb->name));
- printf ("full size:\t%d B\n", sb->size);
- printf ("checksum:\t0x%x\n", sb->checksum);
- return 0;
-}
-
-int romfs_check (struct part_info *info)
-{
- struct romfs_super *sb;
- if (info->dev->id->type != MTD_DEV_TYPE_NOR)
- return 0;
-
- sb = (struct romfs_super *)PART_OFFSET (info);
- if ((sb->word0 != 0x2D726F6D) || (sb->word1 != 0x3166732D)) {
- return 0;
- }
- return 1;
-}
-
-#endif
diff --git a/include/configs/ml401.h b/include/configs/ml401.h
index 74fe888..7eeae70 100644
--- a/include/configs/ml401.h
+++ b/include/configs/ml401.h
@@ -1,7 +1,7 @@
/*
* (C) Copyright 2007 Czech Technical University.
*
- * Michal SIMEK <monstr@monstr.eu>
+ * Michal SIMEK <monstr@seznam.cz>
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -32,7 +32,6 @@
#define CONFIG_ML401 1 /* ML401 Board */
/* uart */
-#define XILINX_UARTLITE
#define CONFIG_SERIAL_BASE XILINX_UART_BASEADDR
#define CONFIG_BAUDRATE XILINX_UART_BAUDRATE
#define CFG_BAUDRATE_TABLE { CONFIG_BAUDRATE }
@@ -87,7 +86,7 @@
* 0x11FB_F000 CFG_MONITOR_BASE
* MONITOR_CODE 256kB Env
* 0x13FF_F000 CFG_GBL_DATA_OFFSET
- * GLOBAL_DATA 4kB bd, gd
+ * GLOBAL_DATA 4kB bd, gd
* 0x1400_0000 CFG_SDRAM_BASE + CFG_SDRAM_SIZE
*/
@@ -100,7 +99,7 @@
/* global pointer */
#define CFG_GBL_DATA_SIZE 0x1000 /* size of global data */
/* start of global data */
-#define CFG_GBL_DATA_OFFSET (CFG_SDRAM_BASE + CFG_SDRAM_SIZE - CFG_GBL_DATA_SIZE)
+#define CFG_GBL_DATA_OFFSET (CFG_SDRAM_BASE + CFG_SDRAM_SIZE - CFG_GBL_DATA_SIZE)
/* monitor code */
#define SIZE 0x40000
@@ -146,16 +145,6 @@
#define CFG_FLASH_PROTECTION /* hardware flash protection */
#endif /* !FLASH */
-/* system ace */
-#ifdef XILINX_SYSACE_BASEADDR
- #define CONFIG_SYSTEMACE
- /* #define DEBUG_SYSTEMACE */
- #define SYSTEMACE_CONFIG_FPGA
- #define CFG_SYSTEMACE_BASE XILINX_SYSACE_BASEADDR
- #define CFG_SYSTEMACE_WIDTH XILINX_SYSACE_MEM_WIDTH
- #define CONFIG_DOS_PARTITION
-#endif
-
/*
* BOOTP options
*/
@@ -164,21 +153,28 @@
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
+
/*
* Command line configuration.
*/
#include <config_cmd_default.h>
#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_AUTOSCRIPT
+#define CONFIG_CMD_BDI
#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_IMI
#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_LOADB
+#define CONFIG_CMD_LOADS
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_MISC
#define CONFIG_CMD_MFSL
+#define CONFIG_CMD_NET
#define CONFIG_CMD_PING
-
-#if defined(CONFIG_SYSTEMACE)
- #define CONFIG_CMD_EXT2
- #define CONFIG_CMD_FAT
-#endif
+#define CONFIG_CMD_RUN
#if defined(FLASH)
#define CONFIG_CMD_ECHO
@@ -190,8 +186,6 @@
#define CONFIG_CMD_ENV
#define CONFIG_CMD_SAVES
#endif
-#else
- #undef CONFIG_CMD_FLASH
#endif
#if defined(CONFIG_CMD_JFFS2)
@@ -216,16 +210,24 @@
#define CONFIG_BOOTDELAY 30
#define CONFIG_BOOTARGS "root=romfs"
#define CONFIG_HOSTNAME "ml401"
-#define CONFIG_BOOTCOMMAND "base 0;tftp 11000000 image.img;bootm"
+#define CONFIG_BOOTCOMMAND "base 0;tftp 11000000 image.img;bootm"
#define CONFIG_IPADDR 192.168.0.3
-#define CONFIG_SERVERIP 192.168.0.5
-#define CONFIG_GATEWAYIP 192.168.0.1
+#define CONFIG_SERVERIP 192.168.0.5
+#define CONFIG_GATEWAYIP 192.168.0.1
#define CONFIG_ETHADDR 00:E0:0C:00:00:FD
/* architecture dependent code */
#define CFG_USR_EXCEP /* user exception */
#define CFG_HZ 1000
+/* system ace */
+#define CONFIG_SYSTEMACE
+/* #define DEBUG_SYSTEMACE */
+#define SYSTEMACE_CONFIG_FPGA
+#define CFG_SYSTEMACE_BASE XILINX_SYSACE_BASEADDR
+#define CFG_SYSTEMACE_WIDTH XILINX_SYSACE_MEM_WIDTH
+#define CONFIG_DOS_PARTITION
+
#define CONFIG_PREBOOT "echo U-BOOT for ML401;setenv preboot;echo"
#define CONFIG_EXTRA_ENV_SETTINGS "unlock=yes\0" /* hardware flash protection */\
diff --git a/include/configs/suzaku.h b/include/configs/suzaku.h
index 9a2eec1..08ac9cb 100644
--- a/include/configs/suzaku.h
+++ b/include/configs/suzaku.h
@@ -48,7 +48,6 @@
#define CFG_MALLOC_LEN (256 << 10) /* Reserve 256 kB for malloc */
#define CFG_MALLOC_BASE (CFG_MONITOR_BASE - (1024 * 1024))
-#define XILINX_UARTLITE
#define CONFIG_BAUDRATE 115200
#define CFG_BAUDRATE_TABLE { 115200 }
@@ -56,16 +55,21 @@
#define MICROBLAZE_SYSREG_BASE_ADDR 0xFFFFA000
#define MICROBLAZE_SYSREG_RECONFIGURE (1 << 0)
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
/*
* Command line configuration.
*/
#include <config_cmd_default.h>
-#undef CONFIG_CMD_BDI
-#undef CONFIG_CMD_ENV
-#undef CONFIG_CMD_MEMORY
-#undef CONFIG_CMD_NET
-#undef CONFIG_CMD_MISC
#define CFG_UART1_BASE (0xFFFF2000)
#define CONFIG_SERIAL_BASE CFG_UART1_BASE
@@ -104,6 +108,4 @@
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
-#define XILINX_CLOCK_FREQ 50000000
-
#endif /* __CONFIG_H */
diff --git a/include/configs/xupv2p.h b/include/configs/xupv2p.h
index 006a132..35001d7 100644
--- a/include/configs/xupv2p.h
+++ b/include/configs/xupv2p.h
@@ -31,34 +31,13 @@
#define CONFIG_XUPV2P 1
/* uart */
-#ifdef XILINX_UARTLITE_BASEADDR
-#define XILINX_UARTLITE
-#define CONFIG_SERIAL_BASE XILINX_UARTLITE_BASEADDR
-#define CONFIG_BAUDRATE XILINX_UARTLITE_BAUDRATE
+#define CONFIG_SERIAL_BASE XILINX_UART_BASEADDR
+#define CONFIG_BAUDRATE XILINX_UART_BAUDRATE
#define CFG_BAUDRATE_TABLE { CONFIG_BAUDRATE }
-#else
-#ifdef XILINX_UART16550_BASEADDR
-#define CFG_NS16550
-#define CFG_NS16550_SERIAL
-#define CFG_NS16550_REG_SIZE 4
-#define CONFIG_CONS_INDEX 1
-#define CFG_NS16550_COM1 XILINX_UART16550_BASEADDR
-#define CFG_NS16550_CLK XILINX_UART16550_CLOCK_HZ
-
-#define CONFIG_BAUDRATE 115200
-#define CFG_BAUDRATE_TABLE { 9600, 115200 }
-#endif
-#endif
/* ethernet */
-#ifdef XILINX_EMAC_BASEADDR
-#define XILINX_EMAC 1
-#else
-#ifdef XILINX_EMACLITE_BASEADDR
-#define XILINX_EMACLITE 1
-#endif
-#endif
-#undef ET_DEBUG
+#define CONFIG_EMAC 1
+#define XPAR_EMAC_0_DEVICE_ID XPAR_XEMAC_NUM_INSTANCES
/*
* setting reset address
@@ -69,13 +48,11 @@
* U-BOOT auto-relocate to TEXT_BASE. After RESET command Microblaze
* jump to CFG_RESET_ADDRESS where is the original U-BOOT code.
*/
-/* #define CFG_RESET_ADDRESS 0x36000000 */
+#define CFG_RESET_ADDRESS 0x36000000
/* gpio */
-#ifdef XILINX_GPIO_BASEADDR
#define CFG_GPIO_0 1
#define CFG_GPIO_0_ADDR XILINX_GPIO_BASEADDR
-#endif
/* interrupt controller */
#define CFG_INTC_0 1
@@ -142,6 +119,7 @@
#define CFG_ENV_SIZE 0x1000
#define CFG_ENV_ADDR (CFG_MONITOR_BASE - CFG_ENV_SIZE)
+
/*
* BOOTP options
*/
@@ -150,24 +128,29 @@
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
+
/*
* Command line configuration.
*/
#include <config_cmd_default.h>
-#undef CONFIG_CMD_FLASH
-#undef CONFIG_CMD_IMLS
-
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_MEMORY
#define CONFIG_CMD_IRQ
-#define CONFIG_CMD_MFSL
+#define CONFIG_CMD_BDI
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_IMI
+#define CONFIG_CMD_ECHO
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_RUN
+#define CONFIG_CMD_AUTOSCRIPT
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_LOADS
+#define CONFIG_CMD_LOADB
+#define CONFIG_CMD_MISC
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_EXT2
#define CONFIG_CMD_PING
-#ifdef XILINX_SYSACE_BASEADDR
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
-#endif
/* Miscellaneous configurable options */
#define CFG_PROMPT "U-Boot-mONStR> "
@@ -179,7 +162,7 @@
#define CONFIG_BOOTDELAY 30
#define CONFIG_BOOTARGS "root=romfs"
-#define CONFIG_HOSTNAME "xupv2p"
+#define CONFIG_HOSTNAME "ml401"
#define CONFIG_BOOTCOMMAND "base 0;tftp 11000000 image.img;bootm"
#define CONFIG_IPADDR 192.168.0.3
#define CONFIG_SERVERIP 192.168.0.5
@@ -195,13 +178,11 @@
"echo"
/* system ace */
-#ifdef XILINX_SYSACE_BASEADDR
#define CONFIG_SYSTEMACE
/* #define DEBUG_SYSTEMACE */
#define SYSTEMACE_CONFIG_FPGA
#define CFG_SYSTEMACE_BASE XILINX_SYSACE_BASEADDR
#define CFG_SYSTEMACE_WIDTH XILINX_SYSACE_MEM_WIDTH
#define CONFIG_DOS_PARTITION
-#endif
#endif /* __CONFIG_H */
diff --git a/lib_microblaze/time.c b/lib_microblaze/time.c
index 0fef834..3fa1b11 100644
--- a/lib_microblaze/time.c
+++ b/lib_microblaze/time.c
@@ -26,17 +26,9 @@
#include <common.h>
-#ifdef CFG_TIMER_0
void udelay (unsigned long usec)
{
int i;
i = get_timer (0);
while ((get_timer (0) - i) < (usec / 1000)) ;
}
-#else
-void udelay (unsigned long usec)
-{
- unsigned int i;
- for (i = 0; i < (usec * XILINX_CLOCK_FREQ / 10000000); i++);
-}
-#endif