ARM: k2g: Add config file
Add config file for k2g
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: Vitaly Andrianov <vitalya@ti.com>
diff --git a/board/ti/ks2_evm/MAINTAINERS b/board/ti/ks2_evm/MAINTAINERS
index 87c36c9..999ef0a 100644
--- a/board/ti/ks2_evm/MAINTAINERS
+++ b/board/ti/ks2_evm/MAINTAINERS
@@ -8,3 +8,5 @@
F: configs/k2e_evm_defconfig
F: include/configs/k2l_evm.h
F: configs/k2l_evm_defconfig
+F: include/configs/k2g_evm.h
+F: configs/k2g_evm_defconfig
diff --git a/configs/k2g_evm_defconfig b/configs/k2g_evm_defconfig
new file mode 100644
index 0000000..59020af
--- /dev/null
+++ b/configs/k2g_evm_defconfig
@@ -0,0 +1,14 @@
+CONFIG_ARM=y
+CONFIG_ARCH_KEYSTONE=y
+CONFIG_TARGET_K2G_EVM=y
+CONFIG_DEFAULT_DEVICE_TREE="k2g-evm"
+CONFIG_SPL=y
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_FLASH is not set
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_OF_CONTROL=y
+CONFIG_SPL_DISABLE_OF_CONTROL=y
+CONFIG_SPI_FLASH=y
+CONFIG_DM=y
+CONFIG_DM_SERIAL=y
+CONFIG_KEYSTONE_SERIAL=y
diff --git a/include/configs/k2g_evm.h b/include/configs/k2g_evm.h
new file mode 100644
index 0000000..d9ad8cf
--- /dev/null
+++ b/include/configs/k2g_evm.h
@@ -0,0 +1,59 @@
+/*
+ * Configuration header file for TI's k2g-evm
+ *
+ * (C) Copyright 2015
+ * Texas Instruments Incorporated, <www.ti.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_K2G_EVM_H
+#define __CONFIG_K2G_EVM_H
+
+/* Platform type */
+#define CONFIG_SOC_K2G
+#define CONFIG_K2G_EVM
+
+/* U-Boot general configuration */
+#define CONFIG_EXTRA_ENV_KS2_BOARD_SETTINGS \
+ DEFAULT_MMC_TI_ARGS \
+ "console=ttyS0,115200n8\0" \
+ "bootpart=0:2\0" \
+ "bootdir=/boot\0" \
+ "addr_mon=0x0c040000\0" \
+ "args_ubi=setenv bootargs ${bootargs} rootfstype=ubifs " \
+ "root=ubi0:rootfs rootflags=sync rw ubi.mtd=ubifs,2048\0" \
+ "name_fdt=k2g-evm.dtb\0" \
+ "name_mon=skern-k2g.bin\0" \
+ "name_ubi=k2g-evm-ubifs.ubi\0" \
+ "name_uboot=u-boot-spi-k2g-evm.gph\0" \
+ "init_mmc=run args_all args_mmc\0" \
+ "get_fdt_mmc=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${name_fdt}\0"\
+ "get_kern_mmc=load mmc ${bootpart} ${loadaddr} " \
+ "${bootdir}/${name_kern}\0" \
+ "get_mon_mmc=load mmc ${bootpart} ${addr_mon} ${bootdir}/${name_mon}\0"\
+
+#include <configs/ti_armv7_keystone2.h>
+
+/* SPL SPI Loader Configuration */
+#define CONFIG_SPL_TEXT_BASE 0x0c080000
+
+/* NAND Configuration */
+#define CONFIG_SYS_NAND_PAGE_2K
+
+/* Network */
+#define CONFIG_KSNET_NETCP_V1_5
+#define CONFIG_KSNET_CPSW_NUM_PORTS 2
+#define CONFIG_KSNET_MDIO_PHY_CONFIG_ENABLE
+#define CONFIG_PHY_MICREL
+
+/* MMC/SD */
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_OMAP_HSMMC
+#define CONFIG_CMD_MMC
+
+#define CONFIG_SF_DEFAULT_BUS 1
+#define CONFIG_SF_DEFAULT_CS 0
+
+#endif /* __CONFIG_K2G_EVM_H */