ARM: dts: sun7i: Update A20 dts(i) files from Linux-v4.18-rc3
Update all A10 devicetree dtsi and dtsi files from Linux-v4.18-rc3
with below commit:
commit 5d9ef839f874f4e3923c8a9ae7b136c6c3912cd5
Author: Stefan Mavrodiev <stefan@olimex.com>
Date: Wed May 16 14:38:08 2018 +0300
ARM: dts: sun7i: Add Olimex A20-SOM-EVB-eMMC board
Note:
- Update sun7i-a20-primo73.dts as per Linux, since
this dts is U-Boot specific.
- Drop sun7i-a20-olimex-som-evb-emmc.dts since no board
added for this.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
diff --git a/arch/arm/dts/sun7i-a20-bananapi-m1-plus.dts b/arch/arm/dts/sun7i-a20-bananapi-m1-plus.dts
index 4c03cc3..763cb03 100644
--- a/arch/arm/dts/sun7i-a20-bananapi-m1-plus.dts
+++ b/arch/arm/dts/sun7i-a20-bananapi-m1-plus.dts
@@ -60,6 +60,17 @@
stdout-path = "serial0:115200n8";
};
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -109,6 +120,10 @@
cpu-supply = <®_dcdc2>;
};
+&de {
+ status = "okay";
+};
+
&ehci0 {
status = "okay";
};
@@ -130,6 +145,16 @@
};
};
+&hdmi {
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
@@ -144,6 +169,10 @@
#include "axp209.dtsi"
+&ac_power_supply {
+ status = "okay";
+};
+
&ir0 {
pinctrl-names = "default";
pinctrl-0 = <&ir0_rx_pins_a>;
@@ -155,8 +184,7 @@
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bpi_m1p>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
- cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */
- cd-inverted;
+ cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */
status = "okay";
};
diff --git a/arch/arm/dts/sun7i-a20-bananapi.dts b/arch/arm/dts/sun7i-a20-bananapi.dts
index 67c8a76..70dfc4a 100644
--- a/arch/arm/dts/sun7i-a20-bananapi.dts
+++ b/arch/arm/dts/sun7i-a20-bananapi.dts
@@ -48,7 +48,6 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "LeMaker Banana Pi";
@@ -64,6 +63,17 @@
stdout-path = "serial0:115200n8";
};
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -110,6 +120,10 @@
>;
};
+&de {
+ status = "okay";
+};
+
&ehci0 {
status = "okay";
};
@@ -131,6 +145,16 @@
};
};
+&hdmi {
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
@@ -160,8 +184,7 @@
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bananapi>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
- cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */
- cd-inverted;
+ cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */
status = "okay";
};
@@ -178,32 +201,77 @@
};
&pio {
+ gpio-line-names =
+ /* PA */
+ "ERXD3", "ERXD2", "ERXD1", "ERXD0", "ETXD3",
+ "ETXD2", "ETXD1", "ETXD0",
+ "ERXCK", "ERXERR", "ERXDV", "EMDC", "EMDIO",
+ "ETXEN", "ETXCK", "ECRS",
+ "ECOL", "ETXERR", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ /* PB */
+ "PMU-SCK", "PMU-SDA", "", "", "", "", "", "",
+ "", "USB0-DRV", "", "", "", "", "", "",
+ "", "", "", "", "SCL", "SDA", "", "",
+ "", "", "", "", "", "", "", "",
+ /* PC */
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ /* PD */
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ /* PE */
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ /* PF */
+ "SD0-D1", "SD0-D0", "SD0-CLK", "SD0-CMD", "SD0-D3",
+ "SD0-D2", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ /* PG */
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ /* PH */
+ "TXD0", "RXD0", "IO-1", "PH3", "USB0-IDDET", "PH5", "", "",
+ "", "", "SD0-DET", "", "", "", "", "",
+ "", "", "", "", "IO-4", "IO-5", "", "EMAC-PWR-EN",
+ "LED1", "", "", "", "", "", "", "",
+ /* PI */
+ "", "", "", "IO-GCLK", "", "", "", "",
+ "", "", "SPI-CE0", "SPI-CLK", "SPI-MOSI",
+ "SPI-MISO", "SPI-CE1", "",
+ "IO-6", "IO-3", "IO-2", "IO-0", "", "", "", "",
+ "", "", "", "", "", "", "", "";
+
usb0_id_detect_pin: usb0_id_detect_pin@0 {
- allwinner,pins = "PH4";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PH4";
+ function = "gpio_in";
+ bias-pull-up;
};
mmc0_cd_pin_bananapi: mmc0_cd_pin@0 {
- allwinner,pins = "PH10";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PH10";
+ function = "gpio_in";
+ bias-pull-up;
};
gmac_power_pin_bananapi: gmac_power_pin@0 {
- allwinner,pins = "PH23";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH23";
+ function = "gpio_out";
};
led_pins_bananapi: led_pins@0 {
- allwinner,pins = "PH24";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH24";
+ function = "gpio_out";
};
};
diff --git a/arch/arm/dts/sun7i-a20-bananapro.dts b/arch/arm/dts/sun7i-a20-bananapro.dts
index 18fcc87..0898eb6 100644
--- a/arch/arm/dts/sun7i-a20-bananapro.dts
+++ b/arch/arm/dts/sun7i-a20-bananapro.dts
@@ -76,6 +76,13 @@
};
};
+ wifi_pwrseq: wifi-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ pinctrl-names = "default";
+ pinctrl-0 = <&vmmc3_pin_bananapro>;
+ reset-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>;
+ };
+
reg_gmac_3v3: gmac-3v3 {
compatible = "regulator-fixed";
pinctrl-names = "default";
@@ -87,23 +94,16 @@
enable-active-high;
gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>;
};
-
- reg_vmmc3: vmmc3 {
- compatible = "regulator-fixed";
- pinctrl-names = "default";
- pinctrl-0 = <&vmmc3_pin_bananapro>;
- regulator-name = "vmmc3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- enable-active-high;
- gpio = <&pio 7 22 GPIO_ACTIVE_HIGH>;
- };
};
&ahci {
status = "okay";
};
+&codec {
+ status = "okay";
+};
+
&ehci0 {
status = "okay";
};
@@ -158,18 +158,26 @@
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bananapro>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
- cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */
- cd-inverted;
+ cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */
status = "okay";
};
&mmc3 {
pinctrl-names = "default";
pinctrl-0 = <&mmc3_pins_a>;
- vmmc-supply = <®_vmmc3>;
+ vmmc-supply = <®_vcc3v3>;
+ mmc-pwrseq = <&wifi_pwrseq>;
bus-width = <4>;
non-removable;
status = "okay";
+
+ brcmf: wifi@1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+ interrupt-parent = <&pio>;
+ interrupts = <7 15 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-names = "host-wake";
+ };
};
&ohci0 {
@@ -182,45 +190,34 @@
&pio {
gmac_power_pin_bananapro: gmac_power_pin@0 {
- allwinner,pins = "PH23";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH23";
+ function = "gpio_out";
};
led_pins_bananapro: led_pins@0 {
- allwinner,pins = "PH24", "PG2";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH24", "PG2";
+ function = "gpio_out";
};
mmc0_cd_pin_bananapro: mmc0_cd_pin@0 {
- allwinner,pins = "PH10";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PH10";
+ function = "gpio_in";
+ bias-pull-up;
};
usb1_vbus_pin_bananapro: usb1_vbus_pin@0 {
- allwinner,pins = "PH0";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH0";
+ function = "gpio_out";
};
usb2_vbus_pin_bananapro: usb2_vbus_pin@0 {
- allwinner,pins = "PH1";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH1";
+ function = "gpio_out";
};
vmmc3_pin_bananapro: vmmc3_pin@0 {
- allwinner,pins = "PH22";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH22";
+ function = "gpio_out";
};
};
diff --git a/arch/arm/dts/sun7i-a20-cubieboard2.dts b/arch/arm/dts/sun7i-a20-cubieboard2.dts
index 1fa832d..942ac9d 100644
--- a/arch/arm/dts/sun7i-a20-cubieboard2.dts
+++ b/arch/arm/dts/sun7i-a20-cubieboard2.dts
@@ -48,7 +48,6 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Cubietech Cubieboard2";
@@ -62,6 +61,17 @@
stdout-path = "serial0:115200n8";
};
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -92,6 +102,10 @@
cpu-supply = <®_dcdc2>;
};
+&de {
+ status = "okay";
+};
+
&ehci0 {
status = "okay";
};
@@ -112,6 +126,16 @@
};
};
+&hdmi {
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
@@ -138,11 +162,10 @@
&mmc0 {
pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+ pinctrl-0 = <&mmc0_pins_a>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
- cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
- cd-inverted;
+ cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
status = "okay";
};
@@ -160,17 +183,14 @@
&pio {
led_pins_cubieboard2: led_pins@0 {
- allwinner,pins = "PH20", "PH21";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH20", "PH21";
+ function = "gpio_out";
};
usb0_id_detect_pin: usb0_id_detect_pin@0 {
- allwinner,pins = "PH4";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PH4";
+ function = "gpio_in";
+ bias-pull-up;
};
};
@@ -178,13 +198,12 @@
status = "okay";
};
-&usb_otg {
- dr_mode = "otg";
+#include "axp209.dtsi"
+
+&ac_power_supply {
status = "okay";
};
-#include "axp209.dtsi"
-
®_dcdc2 {
regulator-always-on;
regulator-min-microvolt = <1000000>;
@@ -224,6 +243,11 @@
status = "okay";
};
+&usb_otg {
+ dr_mode = "otg";
+ status = "okay";
+};
+
&usbphy {
pinctrl-names = "default";
pinctrl-0 = <&usb0_id_detect_pin>;
diff --git a/arch/arm/dts/sun7i-a20-cubietruck.dts b/arch/arm/dts/sun7i-a20-cubietruck.dts
index 83f39b03..5649161 100644
--- a/arch/arm/dts/sun7i-a20-cubietruck.dts
+++ b/arch/arm/dts/sun7i-a20-cubietruck.dts
@@ -48,7 +48,6 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Cubietech Cubietruck";
@@ -62,6 +61,17 @@
stdout-path = "serial0:115200n8";
};
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -127,6 +137,10 @@
cpu-supply = <®_dcdc2>;
};
+&de {
+ status = "okay";
+};
+
&ehci0 {
status = "okay";
};
@@ -147,6 +161,16 @@
};
};
+&hdmi {
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
@@ -179,11 +203,10 @@
&mmc0 {
pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+ pinctrl-0 = <&mmc0_pins_a>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
- cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
- cd-inverted;
+ cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
status = "okay";
};
@@ -196,7 +219,7 @@
non-removable;
status = "okay";
- brcmf: bcrmf@1 {
+ brcmf: wifi@1 {
reg = <1>;
compatible = "brcm,bcm4329-fmac";
interrupt-parent = <&pio>;
@@ -207,7 +230,7 @@
&mmc3_pins_a {
/* AP6210 requires pull-up */
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ bias-pull-up;
};
&ohci0 {
@@ -224,45 +247,33 @@
&pio {
ahci_pwr_pin_cubietruck: ahci_pwr_pin@1 {
- allwinner,pins = "PH12";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH12";
+ function = "gpio_out";
};
led_pins_cubietruck: led_pins@0 {
- allwinner,pins = "PH7", "PH11", "PH20", "PH21";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH7", "PH11", "PH20", "PH21";
+ function = "gpio_out";
};
mmc3_pwrseq_pin_cubietruck: mmc3_pwrseq_pin@0 {
- allwinner,pins = "PH9";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH9";
+ function = "gpio_out";
};
usb0_vbus_pin_a: usb0_vbus_pin@0 {
- allwinner,pins = "PH17";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH17";
+ function = "gpio_out";
};
usb0_id_detect_pin: usb0_id_detect_pin@0 {
- allwinner,pins = "PH19";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH19";
+ function = "gpio_in";
};
usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
- allwinner,pins = "PH22";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH22";
+ function = "gpio_in";
};
};
@@ -280,6 +291,14 @@
#include "axp209.dtsi"
+&ac_power_supply {
+ status = "okay";
+};
+
+&battery_power_supply {
+ status = "okay";
+};
+
®_dcdc2 {
regulator-always-on;
regulator-min-microvolt = <1000000>;
@@ -336,11 +355,16 @@
status = "okay";
};
+&usb_power_supply {
+ status = "okay";
+};
+
&usbphy {
pinctrl-names = "default";
pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
usb0_id_det-gpios = <&pio 7 19 GPIO_ACTIVE_HIGH>; /* PH19 */
usb0_vbus_det-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
+ usb0_vbus_power-supply = <&usb_power_supply>;
usb0_vbus-supply = <®_usb0_vbus>;
usb1_vbus-supply = <®_usb1_vbus>;
usb2_vbus-supply = <®_usb2_vbus>;
diff --git a/arch/arm/dts/sun7i-a20-hummingbird.dts b/arch/arm/dts/sun7i-a20-hummingbird.dts
index 37f4a54..1f0e5ec 100644
--- a/arch/arm/dts/sun7i-a20-hummingbird.dts
+++ b/arch/arm/dts/sun7i-a20-hummingbird.dts
@@ -48,7 +48,6 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Merrii A20 Hummingbird";
@@ -161,11 +160,10 @@
&mmc0 {
pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+ pinctrl-0 = <&mmc0_pins_a>;
vmmc-supply = <®_vcc3v0>;
bus-width = <4>;
- cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
- cd-inverted;
+ cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
status = "okay";
};
@@ -188,31 +186,23 @@
&pio {
ahci_pwr_pin_a20_hummingbird: ahci_pwr_pin@0 {
- allwinner,pins = "PH15";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH15";
+ function = "gpio_out";
};
usb1_vbus_pin_a20_hummingbird: usb1_vbus_pin@0 {
- allwinner,pins = "PH2";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH2";
+ function = "gpio_out";
};
mmc3_vdd_pin_a20_hummingbird: mmc3_vdd_pin@0 {
- allwinner,pins = "PH9";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH9";
+ function = "gpio_out";
};
gmac_vdd_pin_a20_hummingbird: gmac_vdd_pin@0 {
- allwinner,pins = "PH16";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH16";
+ function = "gpio_out";
};
};
diff --git a/arch/arm/dts/sun7i-a20-i12-tvbox.dts b/arch/arm/dts/sun7i-a20-i12-tvbox.dts
index 1e6bd36..2e3f2f2 100644
--- a/arch/arm/dts/sun7i-a20-i12-tvbox.dts
+++ b/arch/arm/dts/sun7i-a20-i12-tvbox.dts
@@ -46,7 +46,6 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "I12 / Q5 / QT840A A20 tvbox";
@@ -158,11 +157,10 @@
&mmc0 {
pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+ pinctrl-0 = <&mmc0_pins_a>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
- cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
- cd-inverted;
+ cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
status = "okay";
};
@@ -174,7 +172,7 @@
non-removable;
status = "okay";
- brcmf: bcrmf@1 {
+ brcmf: wifi@1 {
reg = <1>;
compatible = "brcm,bcm4329-fmac";
interrupt-parent = <&pio>;
@@ -185,7 +183,7 @@
&mmc3_pins_a {
/* AP6210 / AP6330 requires pull-up */
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ bias-pull-up;
};
&ohci0 {
@@ -198,31 +196,23 @@
&pio {
vmmc3_pin_i12_tvbox: vmmc3_pin@0 {
- allwinner,pins = "PH2";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH2";
+ function = "gpio_out";
};
vmmc3_io_pin_i12_tvbox: vmmc3_io_pin@0 {
- allwinner,pins = "PH12";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH12";
+ function = "gpio_out";
};
gmac_power_pin_i12_tvbox: gmac_power_pin@0 {
- allwinner,pins = "PH21";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH21";
+ function = "gpio_out";
};
led_pins_i12_tvbox: led_pins@0 {
- allwinner,pins = "PH9", "PH20";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH9", "PH20";
+ function = "gpio_out";
};
};
diff --git a/arch/arm/dts/sun7i-a20-icnova-swac.dts b/arch/arm/dts/sun7i-a20-icnova-swac.dts
index f5b5325..926fa19 100644
--- a/arch/arm/dts/sun7i-a20-icnova-swac.dts
+++ b/arch/arm/dts/sun7i-a20-icnova-swac.dts
@@ -46,7 +46,6 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "ICnova-A20 SWAC";
@@ -105,11 +104,10 @@
&mmc0 {
pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+ pinctrl-0 = <&mmc0_pins_a>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
- cd-gpios = <&pio 8 5 GPIO_ACTIVE_HIGH>; /* PI5 */
- cd-inverted;
+ cd-gpios = <&pio 8 5 GPIO_ACTIVE_LOW>; /* PI5 */
status = "okay";
};
diff --git a/arch/arm/dts/sun7i-a20-itead-ibox.dts b/arch/arm/dts/sun7i-a20-itead-ibox.dts
index 10d48cb..1b05ba4 100644
--- a/arch/arm/dts/sun7i-a20-itead-ibox.dts
+++ b/arch/arm/dts/sun7i-a20-itead-ibox.dts
@@ -121,20 +121,18 @@
&mmc0 {
pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+ pinctrl-0 = <&mmc0_pins_a>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
- cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
- cd-inverted;
+ cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
status = "okay";
};
&pio {
led_pins_itead_core: led_pins@0 {
- allwinner,pins = "PH20","PH21";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_20_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH20","PH21";
+ function = "gpio_out";
+ drive-strength = <20>;
};
};
diff --git a/arch/arm/dts/sun7i-a20-lamobo-r1.dts b/arch/arm/dts/sun7i-a20-lamobo-r1.dts
index 73c05da..b1ab7c1 100644
--- a/arch/arm/dts/sun7i-a20-lamobo-r1.dts
+++ b/arch/arm/dts/sun7i-a20-lamobo-r1.dts
@@ -46,7 +46,6 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Lamobo R1";
@@ -62,6 +61,17 @@
stdout-path = "serial0:115200n8";
};
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -86,10 +96,6 @@
};
};
-&ahci_pwr_pin_a {
- allwinner,pins = "PB3";
-};
-
&ahci {
target-supply = <®_ahci_5v>;
status = "okay";
@@ -103,6 +109,10 @@
cpu-supply = <®_dcdc2>;
};
+&de {
+ status = "okay";
+};
+
&ehci0 {
status = "okay";
};
@@ -167,7 +177,7 @@
reg = <8>;
label = "cpu";
ethernet = <&gmac>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-txid";
fixed-link {
speed = <1000>;
full-duplex;
@@ -178,6 +188,16 @@
};
};
+&hdmi {
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
@@ -207,8 +227,7 @@
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_lamobo_r1>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
- cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */
- cd-inverted;
+ cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */
status = "okay";
};
@@ -222,36 +241,38 @@
&pio {
usb0_id_detect_pin: usb0_id_detect_pin@0 {
- allwinner,pins = "PH4";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PH4";
+ function = "gpio_in";
+ bias-pull-up;
};
mmc0_cd_pin_lamobo_r1: mmc0_cd_pin@0 {
- allwinner,pins = "PH10";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PH10";
+ function = "gpio_in";
+ bias-pull-up;
};
gmac_power_pin_lamobo_r1: gmac_power_pin@0 {
- allwinner,pins = "PH23";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH23";
+ function = "gpio_out";
};
led_pins_lamobo_r1: led_pins@0 {
- allwinner,pins = "PH24";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH24";
+ function = "gpio_out";
};
};
#include "axp209.dtsi"
+&ac_power_supply {
+ status = "okay";
+};
+
+&battery_power_supply {
+ status = "okay";
+};
+
®_ahci_5v {
gpio = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
status = "okay";
@@ -326,10 +347,6 @@
status = "okay";
};
-&usb2_vbus_pin_a {
- allwinner,pins = "PH12";
-};
-
&usbphy {
pinctrl-names = "default";
pinctrl-0 = <&usb0_id_detect_pin>;
diff --git a/arch/arm/dts/sun7i-a20-m3.dts b/arch/arm/dts/sun7i-a20-m3.dts
index 8d9ea48..e91a209 100644
--- a/arch/arm/dts/sun7i-a20-m3.dts
+++ b/arch/arm/dts/sun7i-a20-m3.dts
@@ -48,7 +48,6 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Mele M3";
@@ -118,11 +117,10 @@
&mmc0 {
pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+ pinctrl-0 = <&mmc0_pins_a>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
- cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
- cd-inverted;
+ cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
status = "okay";
};
@@ -145,10 +143,8 @@
&pio {
led_pins_m3: led_pins@0 {
- allwinner,pins = "PH20";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH20";
+ function = "gpio_out";
};
};
diff --git a/arch/arm/dts/sun7i-a20-mk808c.dts b/arch/arm/dts/sun7i-a20-mk808c.dts
index 90ff4a2..6109f79 100644
--- a/arch/arm/dts/sun7i-a20-mk808c.dts
+++ b/arch/arm/dts/sun7i-a20-mk808c.dts
@@ -53,7 +53,6 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "mk808c";
@@ -67,12 +66,27 @@
chosen {
stdout-path = "serial0:115200n8";
};
+
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
};
&codec {
status = "okay";
};
+&de {
+ status = "okay";
+};
+
&ehci0 {
status = "okay";
};
@@ -81,6 +95,16 @@
status = "okay";
};
+&hdmi {
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
@@ -110,11 +134,10 @@
&mmc0 {
pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+ pinctrl-0 = <&mmc0_pins_a>;
vmmc-supply = <®_vcc3v0>;
bus-width = <4>;
- cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
- cd-inverted;
+ cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
status = "okay";
};
@@ -132,17 +155,13 @@
&pio {
usb0_id_detect_pin: usb0_id_detect_pin@0 {
- allwinner,pins = "PH4";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH4";
+ function = "gpio_in";
};
usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
- allwinner,pins = "PH5";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH5";
+ function = "gpio_in";
};
};
diff --git a/arch/arm/dts/sun7i-a20-olimex-som-evb.dts b/arch/arm/dts/sun7i-a20-olimex-som-evb.dts
index 23aacce..f080f82 100644
--- a/arch/arm/dts/sun7i-a20-olimex-som-evb.dts
+++ b/arch/arm/dts/sun7i-a20-olimex-som-evb.dts
@@ -48,7 +48,6 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Olimex A20-Olimex-SOM-EVB";
@@ -62,6 +61,17 @@
stdout-path = "serial0:115200n8";
};
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -80,6 +90,10 @@
status = "okay";
};
+&de {
+ status = "okay";
+};
+
&ehci0 {
status = "okay";
};
@@ -88,6 +102,10 @@
status = "okay";
};
+&cpu0 {
+ cpu-supply = <®_dcdc2>;
+};
+
&codec {
status = "okay";
};
@@ -104,6 +122,16 @@
};
};
+&hdmi {
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
@@ -116,6 +144,18 @@
};
};
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_a>;
+ status = "okay";
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins_a>;
+ status = "okay";
+};
+
&lradc {
vref-supply = <®_vcc3v0>;
status = "okay";
@@ -172,11 +212,10 @@
&mmc0 {
pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+ pinctrl-0 = <&mmc0_pins_a>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
- cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
- cd-inverted;
+ cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
status = "okay";
};
@@ -185,8 +224,7 @@
pinctrl-0 = <&mmc3_pins_a>, <&mmc3_cd_pin_olimex_som_evb>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
- cd-gpios = <&pio 7 0 GPIO_ACTIVE_HIGH>; /* PH0 */
- cd-inverted;
+ cd-gpios = <&pio 7 0 GPIO_ACTIVE_LOW>; /* PH0 */
status = "okay";
};
@@ -204,38 +242,30 @@
&pio {
ahci_pwr_pin_olimex_som_evb: ahci_pwr_pin@1 {
- allwinner,pins = "PC3";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PC3";
+ function = "gpio_out";
};
led_pins_olimex_som_evb: led_pins@0 {
- allwinner,pins = "PH2";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_20_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH2";
+ function = "gpio_out";
+ drive-strength = <20>;
};
mmc3_cd_pin_olimex_som_evb: mmc3_cd_pin@0 {
- allwinner,pins = "PH0";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PH0";
+ function = "gpio_in";
+ bias-pull-up;
};
usb0_id_detect_pin: usb0_id_detect_pin@0 {
- allwinner,pins = "PH4";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH4";
+ function = "gpio_in";
};
usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
- allwinner,pins = "PH5";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH5";
+ function = "gpio_in";
};
};
@@ -284,12 +314,38 @@
status = "okay";
};
+&spi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi1_pins_a>,
+ <&spi1_cs0_pins_a>;
+ status = "okay";
+};
+
+&spi2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi2_pins_a>,
+ <&spi2_cs0_pins_a>;
+ status = "okay";
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
status = "okay";
};
+&uart6 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart6_pins_a>;
+ status = "okay";
+};
+
+&uart7 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart7_pins_a>;
+ status = "okay";
+};
+
&usb_otg {
dr_mode = "otg";
status = "okay";
diff --git a/arch/arm/dts/sun7i-a20-olimex-som204-evb.dts b/arch/arm/dts/sun7i-a20-olimex-som204-evb.dts
index c183920..3d7b5c8 100644
--- a/arch/arm/dts/sun7i-a20-olimex-som204-evb.dts
+++ b/arch/arm/dts/sun7i-a20-olimex-som204-evb.dts
@@ -32,6 +32,17 @@
stdout-path = "serial0:115200n8";
};
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
leds {
compatible = "gpio-leds";
@@ -65,6 +76,12 @@
status = "okay";
};
+&can0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&can0_pins_a>;
+ status = "okay";
+};
+
&codec {
status = "okay";
};
@@ -73,6 +90,10 @@
cpu-supply = <®_dcdc2>;
};
+&de {
+ status = "okay";
+};
+
&ehci0 {
status = "okay";
};
@@ -98,6 +119,16 @@
};
};
+&hdmi {
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
@@ -141,8 +172,7 @@
pinctrl-0 = <&mmc0_pins_a>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
- cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>;
- cd-inverted;
+ cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>;
status = "okay";
};
@@ -181,6 +211,14 @@
#include "axp209.dtsi"
+&ac_power_supply {
+ status = "okay";
+};
+
+&battery_power_supply {
+ status = "okay";
+};
+
®_ahci_5v {
gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
status = "okay";
diff --git a/arch/arm/dts/sun7i-a20-olinuxino-lime.dts b/arch/arm/dts/sun7i-a20-olinuxino-lime.dts
index 35ad700..d20fd03 100644
--- a/arch/arm/dts/sun7i-a20-olinuxino-lime.dts
+++ b/arch/arm/dts/sun7i-a20-olinuxino-lime.dts
@@ -49,7 +49,6 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Olimex A20-OLinuXino-LIME";
@@ -63,6 +62,17 @@
stdout-path = "serial0:115200n8";
};
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -81,6 +91,10 @@
status = "okay";
};
+&de {
+ status = "okay";
+};
+
&ehci0 {
status = "okay";
};
@@ -101,6 +115,16 @@
};
};
+&hdmi {
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
@@ -131,11 +155,10 @@
&mmc0 {
pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+ pinctrl-0 = <&mmc0_pins_a>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
- cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
- cd-inverted;
+ cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
status = "okay";
};
@@ -153,31 +176,26 @@
&pio {
ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 {
- allwinner,pins = "PC3";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PC3";
+ function = "gpio_out";
};
led_pins_olinuxinolime: led_pins@0 {
- allwinner,pins = "PH2";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_20_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH2";
+ function = "gpio_out";
+ drive-strength = <20>;
};
usb0_id_detect_pin: usb0_id_detect_pin@0 {
- allwinner,pins = "PH4";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PH4";
+ function = "gpio_in";
+ bias-pull-up;
};
usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
- allwinner,pins = "PH5";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
+ pins = "PH5";
+ function = "gpio_in";
+ bias-pull-down;
};
};
diff --git a/arch/arm/dts/sun7i-a20-olinuxino-lime2-emmc.dts b/arch/arm/dts/sun7i-a20-olinuxino-lime2-emmc.dts
index 10d3074..81f376f 100644
--- a/arch/arm/dts/sun7i-a20-olinuxino-lime2-emmc.dts
+++ b/arch/arm/dts/sun7i-a20-olinuxino-lime2-emmc.dts
@@ -57,10 +57,8 @@
&pio {
mmc2_pins_nrst: mmc2-rst-pin {
- allwinner,pins = "PC16";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PC16";
+ function = "gpio_out";
};
};
diff --git a/arch/arm/dts/sun7i-a20-olinuxino-lime2.dts b/arch/arm/dts/sun7i-a20-olinuxino-lime2.dts
index d5c796c..b828677 100644
--- a/arch/arm/dts/sun7i-a20-olinuxino-lime2.dts
+++ b/arch/arm/dts/sun7i-a20-olinuxino-lime2.dts
@@ -46,7 +46,6 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Olimex A20-OLinuXino-LIME2";
@@ -60,6 +59,17 @@
stdout-path = "serial0:115200n8";
};
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -86,6 +96,10 @@
status = "okay";
};
+&de {
+ status = "okay";
+};
+
&ehci0 {
status = "okay";
};
@@ -106,63 +120,25 @@
};
};
+&hdmi {
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp209: pmic@34 {
- compatible = "x-powers,axp209";
reg = <0x34>;
interrupt-parent = <&nmi_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-
- interrupt-controller;
- #interrupt-cells = <1>;
-
- acin-supply = <®_axp_ipsout>;
- vin2-supply = <®_axp_ipsout>;
- vin3-supply = <®_axp_ipsout>;
- ldo24in-supply = <®_axp_ipsout>;
- ldo3in-supply = <®_axp_ipsout>;
-
- regulators {
- vdd_rtc: ldo1 {
- regulator-min-microvolt = <1300000>;
- regulator-max-microvolt = <1300000>;
- regulator-always-on;
- };
-
- avcc: ldo2 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- vcc_csi0: ldo3 {
- regulator-min-microvolt = <700000>;
- regulator-max-microvolt = <3500000>;
- regulator-always-on;
- };
-
- vcc_csi1: ldo4 {
- regulator-min-microvolt = <1250000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- vdd_cpu: dcdc2 {
- regulator-min-microvolt = <700000>;
- regulator-max-microvolt = <2275000>;
- regulator-always-on;
- };
-
- vdd_int: dcdc3 {
- regulator-min-microvolt = <700000>;
- regulator-max-microvolt = <3500000>;
- regulator-always-on;
- };
- };
};
};
@@ -180,11 +156,10 @@
&mmc0 {
pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+ pinctrl-0 = <&mmc0_pins_a>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
- cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
- cd-inverted;
+ cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
status = "okay";
};
@@ -202,38 +177,31 @@
&pio {
ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 {
- allwinner,pins = "PC3";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PC3";
+ function = "gpio_out";
};
led_pins_olinuxinolime: led_pins@0 {
- allwinner,pins = "PH2";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_20_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH2";
+ function = "gpio_out";
+ drive-strength = <20>;
};
usb0_id_detect_pin: usb0_id_detect_pin@0 {
- allwinner,pins = "PH4";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PH4";
+ function = "gpio_in";
+ bias-pull-up;
};
usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
- allwinner,pins = "PH5";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
+ pins = "PH5";
+ function = "gpio_in";
+ bias-pull-down;
};
usb0_vbus_pin_lime2: usb0_vbus_pin@0 {
- allwinner,pins = "PC17";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PC17";
+ function = "gpio_out";
};
};
@@ -243,6 +211,48 @@
status = "okay";
};
+#include "axp209.dtsi"
+
+®_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-name = "vdd-cpu";
+};
+
+®_dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-name = "vdd-int-dll";
+};
+
+®_ldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-name = "vdd-rtc";
+};
+
+®_ldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "avcc";
+};
+
+®_ldo3 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-name = "vddio-csi0";
+};
+
+®_ldo4 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-name = "vddio-csi1";
+};
+
®_usb0_vbus {
pinctrl-0 = <&usb0_vbus_pin_lime2>;
gpio = <&pio 2 17 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/dts/sun7i-a20-olinuxino-micro.dts
index 7e3006f..866d230 100644
--- a/arch/arm/dts/sun7i-a20-olinuxino-micro.dts
+++ b/arch/arm/dts/sun7i-a20-olinuxino-micro.dts
@@ -49,7 +49,6 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Olimex A20-Olinuxino Micro";
@@ -67,6 +66,17 @@
stdout-path = "serial0:115200n8";
};
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -85,6 +95,18 @@
status = "okay";
};
+&codec {
+ status = "okay";
+};
+
+&cpu0 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&de {
+ status = "okay";
+};
+
&ehci0 {
status = "okay";
};
@@ -95,7 +117,7 @@
&gmac {
pinctrl-names = "default";
- pinctrl-0 = <&gmac_pins_mii_a>;
+ pinctrl-0 = <&gmac_pins_mii_a>, <&gmac_txerr>;
phy = <&phy1>;
phy-mode = "mii";
status = "okay";
@@ -105,19 +127,25 @@
};
};
+&hdmi {
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp209: pmic@34 {
- compatible = "x-powers,axp209";
reg = <0x34>;
interrupt-parent = <&nmi_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-
- interrupt-controller;
- #interrupt-cells = <1>;
};
};
@@ -195,11 +223,10 @@
&mmc0 {
pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+ pinctrl-0 = <&mmc0_pins_a>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
- cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
- cd-inverted;
+ cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
status = "okay";
};
@@ -208,8 +235,7 @@
pinctrl-0 = <&mmc3_pins_a>, <&mmc3_cd_pin_olinuxinom>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
- cd-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
- cd-inverted;
+ cd-gpios = <&pio 7 11 GPIO_ACTIVE_LOW>; /* PH11 */
status = "okay";
};
@@ -226,35 +252,67 @@
};
&pio {
+ gmac_txerr: gmac_txerr@0 {
+ pins = "PA17";
+ function = "gmac";
+ };
+
mmc3_cd_pin_olinuxinom: mmc3_cd_pin@0 {
- allwinner,pins = "PH11";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PH11";
+ function = "gpio_in";
+ bias-pull-up;
};
led_pins_olinuxino: led_pins@0 {
- allwinner,pins = "PH2";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_20_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH2";
+ function = "gpio_out";
+ drive-strength = <20>;
};
usb0_id_detect_pin: usb0_id_detect_pin@0 {
- allwinner,pins = "PH4";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PH4";
+ function = "gpio_in";
+ bias-pull-up;
};
usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
- allwinner,pins = "PH5";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
+ pins = "PH5";
+ function = "gpio_in";
+ bias-pull-down;
};
};
+#include "axp209.dtsi"
+
+&ac_power_supply {
+ status = "okay";
+};
+
+&battery_power_supply {
+ status = "okay";
+};
+
+®_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-name = "vdd-cpu";
+};
+
+®_dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-name = "vdd-int-dll";
+};
+
+®_ldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "avcc";
+};
+
®_ahci_5v {
status = "okay";
};
@@ -308,6 +366,10 @@
status = "okay";
};
+&usb_power_supply {
+ status = "okay";
+};
+
&usbphy {
pinctrl-names = "default";
pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
diff --git a/arch/arm/dts/sun7i-a20-orangepi-mini.dts b/arch/arm/dts/sun7i-a20-orangepi-mini.dts
index 2be04c4..f5c7178 100644
--- a/arch/arm/dts/sun7i-a20-orangepi-mini.dts
+++ b/arch/arm/dts/sun7i-a20-orangepi-mini.dts
@@ -48,7 +48,6 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Orange Pi Mini";
@@ -62,6 +61,17 @@
stdout-path = "serial0:115200n8";
};
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -99,6 +109,10 @@
status = "okay";
};
+&de {
+ status = "okay";
+};
+
&ehci0 {
status = "okay";
};
@@ -120,6 +134,16 @@
};
};
+&hdmi {
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
@@ -145,8 +169,7 @@
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_orangepi>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
- cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */
- cd-inverted;
+ cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */
status = "okay";
};
@@ -155,8 +178,7 @@
pinctrl-0 = <&mmc3_pins_a>, <&mmc3_cd_pin_orangepi>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
- cd-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
- cd-inverted;
+ cd-gpios = <&pio 7 11 GPIO_ACTIVE_LOW>; /* PH11 */
status = "okay";
};
@@ -166,52 +188,41 @@
&pio {
usb0_id_detect_pin: usb0_id_detect_pin@0 {
- allwinner,pins = "PH4";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PH4";
+ function = "gpio_in";
+ bias-pull-up;
};
mmc0_cd_pin_orangepi: mmc0_cd_pin@0 {
- allwinner,pins = "PH10";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PH10";
+ function = "gpio_in";
+ bias-pull-up;
};
mmc3_cd_pin_orangepi: mmc3_cd_pin@0 {
- allwinner,pins = "PH11";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PH11";
+ function = "gpio_in";
+ bias-pull-up;
};
usb2_vbus_pin_bananapro: usb2_vbus_pin@0 {
- allwinner,pins = "PH22";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH22";
+ function = "gpio_out";
};
gmac_power_pin_orangepi: gmac_power_pin@0 {
- allwinner,pins = "PH23";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH23";
+ function = "gpio_out";
};
led_pins_orangepi: led_pins@0 {
- allwinner,pins = "PH24", "PH25";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH24", "PH25";
+ function = "gpio_out";
};
usb1_vbus_pin_bananapro: usb1_vbus_pin@0 {
- allwinner,pins = "PH26";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH26";
+ function = "gpio_out";
};
};
diff --git a/arch/arm/dts/sun7i-a20-orangepi.dts b/arch/arm/dts/sun7i-a20-orangepi.dts
index 71125bf..7a4244e 100644
--- a/arch/arm/dts/sun7i-a20-orangepi.dts
+++ b/arch/arm/dts/sun7i-a20-orangepi.dts
@@ -48,7 +48,6 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Orange Pi";
@@ -136,8 +135,7 @@
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_orangepi>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
- cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */
- cd-inverted;
+ cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */
status = "okay";
};
@@ -147,45 +145,35 @@
&pio {
usb0_id_detect_pin: usb0_id_detect_pin@0 {
- allwinner,pins = "PH4";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PH4";
+ function = "gpio_in";
+ bias-pull-up;
};
mmc0_cd_pin_orangepi: mmc0_cd_pin@0 {
- allwinner,pins = "PH10";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PH10";
+ function = "gpio_in";
+ bias-pull-up;
};
usb2_vbus_pin_bananapro: usb2_vbus_pin@0 {
- allwinner,pins = "PH22";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH22";
+ function = "gpio_out";
};
gmac_power_pin_orangepi: gmac_power_pin@0 {
- allwinner,pins = "PH23";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH23";
+ function = "gpio_out";
};
led_pins_orangepi: led_pins@0 {
- allwinner,pins = "PH24";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH24";
+ function = "gpio_out";
};
usb1_vbus_pin_bananapro: usb1_vbus_pin@0 {
- allwinner,pins = "PH26";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH26";
+ function = "gpio_out";
};
};
diff --git a/arch/arm/dts/sun7i-a20-pcduino3-nano.dts b/arch/arm/dts/sun7i-a20-pcduino3-nano.dts
index ddac732..bfca960 100644
--- a/arch/arm/dts/sun7i-a20-pcduino3-nano.dts
+++ b/arch/arm/dts/sun7i-a20-pcduino3-nano.dts
@@ -58,6 +58,17 @@
stdout-path = "serial0:115200n8";
};
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -90,6 +101,10 @@
cpu-supply = <®_dcdc2>;
};
+&de {
+ status = "okay";
+};
+
&ehci0 {
status = "okay";
};
@@ -110,6 +125,16 @@
};
};
+&hdmi {
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
@@ -130,11 +155,10 @@
&mmc0 {
pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+ pinctrl-0 = <&mmc0_pins_a>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
- cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
- cd-inverted;
+ cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
status = "okay";
};
@@ -152,31 +176,24 @@
&pio {
ahci_pwr_pin_pcduino3_nano: ahci_pwr_pin@0 {
- allwinner,pins = "PH2";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH2";
+ function = "gpio_out";
};
led_pins_pcduino3_nano: led_pins@0 {
- allwinner,pins = "PH16", "PH15";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH16", "PH15";
+ function = "gpio_out";
};
usb0_id_detect_pin: usb0_id_detect_pin@0 {
- allwinner,pins = "PH4";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PH4";
+ function = "gpio_in";
+ bias-pull-up;
};
usb1_vbus_pin_pcduino3_nano: usb1_vbus_pin@0 {
- allwinner,pins = "PD2";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PD2";
+ function = "gpio_out";
};
};
diff --git a/arch/arm/dts/sun7i-a20-pcduino3.dts b/arch/arm/dts/sun7i-a20-pcduino3.dts
index 7f449b6..c576f10 100644
--- a/arch/arm/dts/sun7i-a20-pcduino3.dts
+++ b/arch/arm/dts/sun7i-a20-pcduino3.dts
@@ -48,7 +48,6 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "LinkSprite pcDuino3";
@@ -107,10 +106,6 @@
status = "okay";
};
-&ahci_pwr_pin_a {
- allwinner,pins = "PH2";
-};
-
&codec {
status = "okay";
};
@@ -161,7 +156,7 @@
&mmc0 {
pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+ pinctrl-0 = <&mmc0_pins_a>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
@@ -182,24 +177,19 @@
&pio {
led_pins_pcduino3: led_pins@0 {
- allwinner,pins = "PH15", "PH16";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH15", "PH16";
+ function = "gpio_out";
};
key_pins_pcduino3: key_pins@0 {
- allwinner,pins = "PH17", "PH18", "PH19";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH17", "PH18", "PH19";
+ function = "gpio_in";
};
usb0_id_detect_pin: usb0_id_detect_pin@0 {
- allwinner,pins = "PH4";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PH4";
+ function = "gpio_in";
+ bias-pull-up;
};
};
diff --git a/arch/arm/dts/sun7i-a20-primo73.dts b/arch/arm/dts/sun7i-a20-primo73.dts
index 0658f82..b7294e0 100644
--- a/arch/arm/dts/sun7i-a20-primo73.dts
+++ b/arch/arm/dts/sun7i-a20-primo73.dts
@@ -60,43 +60,33 @@
chosen {
stdout-path = "serial0:115200n8";
};
+};
- soc@01c00000 {
- mmc0: mmc@01c0f000 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
- vmmc-supply = <®_vcc3v3>;
- bus-width = <4>;
- cd-gpios = <&pio 7 1 0>; /* PH1 */
- cd-inverted;
- status = "okay";
- };
+&ehci1 {
+ status = "okay";
+};
- usbphy: phy@01c13400 {
- usb2_vbus-supply = <®_usb2_vbus>;
- status = "okay";
- };
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+ status = "okay";
+};
- ehci1: usb@01c1c000 {
- /* rtl8188etv wifi is connected here */
- status = "okay";
- };
+®_usb2_vbus {
+ gpio = <&pio 7 12 0>; /* PH12 */
+ status = "okay";
+};
- pinctrl@01c20800 {
- usb2_vbus_pin_a: usb2_vbus_pin@0 {
- allwinner,pins = "PH12";
- };
- };
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
- uart0: serial@01c28000 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
- status = "okay";
- };
- };
-
- reg_usb2_vbus: usb2-vbus {
- gpio = <&pio 7 12 0>; /* PH12 */
- status = "okay";
- };
+&usbphy {
+ usb2_vbus-supply = <®_usb2_vbus>;
+ status = "okay";
};
diff --git a/arch/arm/dts/sun7i-a20-wexler-tab7200.dts b/arch/arm/dts/sun7i-a20-wexler-tab7200.dts
index 2f6b21a..8202c87 100644
--- a/arch/arm/dts/sun7i-a20-wexler-tab7200.dts
+++ b/arch/arm/dts/sun7i-a20-wexler-tab7200.dts
@@ -151,11 +151,10 @@
&mmc0 {
pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+ pinctrl-0 = <&mmc0_pins_a>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
- cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
- cd-inverted;
+ cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
status = "okay";
};
@@ -173,31 +172,24 @@
&pio {
bl_enable_pin: bl_enable_pin@0 {
- allwinner,pins = "PH7";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH7";
+ function = "gpio_out";
};
codec_pa_pin: codec_pa_pin@0 {
- allwinner,pins = "PH15";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH15";
+ function = "gpio_out";
};
ts_reset_pin: ts_reset_pin@0 {
- allwinner,pins = "PB13";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PB13";
+ function = "gpio_out";
};
usb0_id_detect_pin: usb0_id_detect_pin@0 {
- allwinner,pins = "PH4";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PH4";
+ function = "gpio_in";
+ bias-pull-up;
};
};
diff --git a/arch/arm/dts/sun7i-a20-wits-pro-a20-dkt.dts b/arch/arm/dts/sun7i-a20-wits-pro-a20-dkt.dts
index dc31d47..ff5c108 100644
--- a/arch/arm/dts/sun7i-a20-wits-pro-a20-dkt.dts
+++ b/arch/arm/dts/sun7i-a20-wits-pro-a20-dkt.dts
@@ -120,11 +120,10 @@
&mmc0 {
pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+ pinctrl-0 = <&mmc0_pins_a>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
- cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
- cd-inverted;
+ cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
status = "okay";
};
@@ -137,7 +136,7 @@
non-removable;
status = "okay";
- brcmf: bcrmf@1 {
+ brcmf: wifi@1 {
reg = <1>;
compatible = "brcm,bcm4329-fmac";
interrupt-parent = <&pio>;
@@ -160,17 +159,14 @@
&pio {
vmmc3_pin_ap6xxx_wl_regon: vmmc3_pin@0 {
- allwinner,pins = "PH9";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH9";
+ function = "gpio_out";
};
usb0_id_detect_pin: usb0_id_detect_pin@0 {
- allwinner,pins = "PH4";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PH4";
+ function = "gpio_in";
+ bias-pull-up;
};
};
diff --git a/arch/arm/dts/sun7i-a20.dtsi b/arch/arm/dts/sun7i-a20.dtsi
index 4394711..e529e4f 100644
--- a/arch/arm/dts/sun7i-a20.dtsi
+++ b/arch/arm/dts/sun7i-a20.dtsi
@@ -46,10 +46,9 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/thermal/thermal.h>
-
-#include <dt-bindings/clock/sun4i-a10-pll2.h>
#include <dt-bindings/dma/sun4i-a10.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
+#include <dt-bindings/clock/sun7i-a20-ccu.h>
+#include <dt-bindings/reset/sun4i-a10-ccu.h>
/ {
interrupt-parent = <&gic>;
@@ -67,9 +66,10 @@
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "de_be0-lcd0-hdmi";
- clocks = <&ahb_gates 36>, <&ahb_gates 43>,
- <&ahb_gates 44>, <&de_be0_clk>,
- <&tcon0_ch1_clk>, <&dram_gates 26>;
+ clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_HDMI0>,
+ <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_DE_BE0>,
+ <&ccu CLK_TCON0_CH1>, <&ccu CLK_DRAM_DE_BE0>,
+ <&ccu CLK_HDMI>;
status = "disabled";
};
@@ -77,9 +77,9 @@
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "de_be0-lcd0";
- clocks = <&ahb_gates 36>, <&ahb_gates 44>,
- <&de_be0_clk>, <&tcon0_ch0_clk>,
- <&dram_gates 26>;
+ clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_DE_BE0>,
+ <&ccu CLK_DE_BE0>, <&ccu CLK_TCON0_CH0>,
+ <&ccu CLK_DRAM_DE_BE0>;
status = "disabled";
};
@@ -87,10 +87,10 @@
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "de_be0-lcd0-tve0";
- clocks = <&ahb_gates 34>, <&ahb_gates 36>,
- <&ahb_gates 44>,
- <&de_be0_clk>, <&tcon0_ch1_clk>,
- <&dram_gates 5>, <&dram_gates 26>;
+ clocks = <&ccu CLK_AHB_TVE0>, <&ccu CLK_AHB_LCD0>,
+ <&ccu CLK_AHB_DE_BE0>,
+ <&ccu CLK_DE_BE0>, <&ccu CLK_TCON0_CH1>,
+ <&ccu CLK_DRAM_TVE0>, <&ccu CLK_DRAM_DE_BE0>;
status = "disabled";
};
};
@@ -103,7 +103,7 @@
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <0>;
- clocks = <&cpu>;
+ clocks = <&ccu CLK_CPU>;
clock-latency = <244144>; /* 8 32k periods */
operating-points = <
/* kHz uV */
@@ -116,8 +116,6 @@
144000 1000000
>;
#cooling-cells = <2>;
- cooling-min-level = <0>;
- cooling-max-level = <6>;
};
cpu@1 {
@@ -182,23 +180,13 @@
#size-cells = <1>;
ranges;
- osc24M: clk@01c20050 {
+ osc24M: clk@1c20050 {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-osc-clk";
- reg = <0x01c20050 0x4>;
+ compatible = "fixed-clock";
clock-frequency = <24000000>;
clock-output-names = "osc24M";
};
- osc3M: osc3M_clk {
- #clock-cells = <0>;
- compatible = "fixed-factor-clock";
- clock-div = <8>;
- clock-mult = <1>;
- clocks = <&osc24M>;
- clock-output-names = "osc3M";
- };
-
osc32k: clk@0 {
#clock-cells = <0>;
compatible = "fixed-clock";
@@ -206,528 +194,6 @@
clock-output-names = "osc32k";
};
- pll1: clk@01c20000 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-pll1-clk";
- reg = <0x01c20000 0x4>;
- clocks = <&osc24M>;
- clock-output-names = "pll1";
- };
-
- pll2: clk@01c20008 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-pll2-clk";
- reg = <0x01c20008 0x8>;
- clocks = <&osc24M>;
- clock-output-names = "pll2-1x", "pll2-2x",
- "pll2-4x", "pll2-8x";
- };
-
- pll3: clk@01c20010 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-pll3-clk";
- reg = <0x01c20010 0x4>;
- clocks = <&osc3M>;
- clock-output-names = "pll3";
- };
-
- pll3x2: pll3x2_clk {
- #clock-cells = <0>;
- compatible = "fixed-factor-clock";
- clocks = <&pll3>;
- clock-div = <1>;
- clock-mult = <2>;
- clock-output-names = "pll3-2x";
- };
-
- pll4: clk@01c20018 {
- #clock-cells = <0>;
- compatible = "allwinner,sun7i-a20-pll4-clk";
- reg = <0x01c20018 0x4>;
- clocks = <&osc24M>;
- clock-output-names = "pll4";
- };
-
- pll5: clk@01c20020 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-pll5-clk";
- reg = <0x01c20020 0x4>;
- clocks = <&osc24M>;
- clock-output-names = "pll5_ddr", "pll5_other";
- };
-
- pll6: clk@01c20028 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-pll6-clk";
- reg = <0x01c20028 0x4>;
- clocks = <&osc24M>;
- clock-output-names = "pll6_sata", "pll6_other", "pll6",
- "pll6_div_4";
- };
-
- pll7: clk@01c20030 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-pll3-clk";
- reg = <0x01c20030 0x4>;
- clocks = <&osc3M>;
- clock-output-names = "pll7";
- };
-
- pll7x2: pll7x2_clk {
- #clock-cells = <0>;
- compatible = "fixed-factor-clock";
- clocks = <&pll7>;
- clock-div = <1>;
- clock-mult = <2>;
- clock-output-names = "pll7-2x";
- };
-
- pll8: clk@01c20040 {
- #clock-cells = <0>;
- compatible = "allwinner,sun7i-a20-pll4-clk";
- reg = <0x01c20040 0x4>;
- clocks = <&osc24M>;
- clock-output-names = "pll8";
- };
-
- cpu: cpu@01c20054 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-cpu-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll6 1>;
- clock-output-names = "cpu";
- };
-
- axi: axi@01c20054 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-axi-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&cpu>;
- clock-output-names = "axi";
- };
-
- ahb: ahb@01c20054 {
- #clock-cells = <0>;
- compatible = "allwinner,sun5i-a13-ahb-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&axi>, <&pll6 3>, <&pll6 1>;
- clock-output-names = "ahb";
- /*
- * Use PLL6 as parent, instead of CPU/AXI
- * which has rate changes due to cpufreq
- */
- assigned-clocks = <&ahb>;
- assigned-clock-parents = <&pll6 3>;
- };
-
- ahb_gates: clk@01c20060 {
- #clock-cells = <1>;
- compatible = "allwinner,sun7i-a20-ahb-gates-clk";
- reg = <0x01c20060 0x8>;
- clocks = <&ahb>;
- clock-indices = <0>, <1>,
- <2>, <3>, <4>,
- <5>, <6>, <7>, <8>,
- <9>, <10>, <11>, <12>,
- <13>, <14>, <16>,
- <17>, <18>, <20>, <21>,
- <22>, <23>, <25>,
- <28>, <32>, <33>, <34>,
- <35>, <36>, <37>, <40>,
- <41>, <42>, <43>,
- <44>, <45>, <46>,
- <47>, <49>, <50>,
- <52>;
- clock-output-names = "ahb_usb0", "ahb_ehci0",
- "ahb_ohci0", "ahb_ehci1", "ahb_ohci1",
- "ahb_ss", "ahb_dma", "ahb_bist", "ahb_mmc0",
- "ahb_mmc1", "ahb_mmc2", "ahb_mmc3", "ahb_ms",
- "ahb_nand", "ahb_sdram", "ahb_ace",
- "ahb_emac", "ahb_ts", "ahb_spi0", "ahb_spi1",
- "ahb_spi2", "ahb_spi3", "ahb_sata",
- "ahb_hstimer", "ahb_ve", "ahb_tvd", "ahb_tve0",
- "ahb_tve1", "ahb_lcd0", "ahb_lcd1", "ahb_csi0",
- "ahb_csi1", "ahb_hdmi1", "ahb_hdmi0",
- "ahb_de_be0", "ahb_de_be1", "ahb_de_fe0",
- "ahb_de_fe1", "ahb_gmac", "ahb_mp",
- "ahb_mali";
- };
-
- apb0: apb0@01c20054 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-apb0-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&ahb>;
- clock-output-names = "apb0";
- };
-
- apb0_gates: clk@01c20068 {
- #clock-cells = <1>;
- compatible = "allwinner,sun7i-a20-apb0-gates-clk";
- reg = <0x01c20068 0x4>;
- clocks = <&apb0>;
- clock-indices = <0>, <1>,
- <2>, <3>, <4>,
- <5>, <6>, <7>,
- <8>, <10>;
- clock-output-names = "apb0_codec", "apb0_spdif",
- "apb0_ac97", "apb0_i2s0", "apb0_i2s1",
- "apb0_pio", "apb0_ir0", "apb0_ir1",
- "apb0_i2s2", "apb0_keypad";
- };
-
- apb1: clk@01c20058 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-apb1-clk";
- reg = <0x01c20058 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&osc32k>;
- clock-output-names = "apb1";
- };
-
- apb1_gates: clk@01c2006c {
- #clock-cells = <1>;
- compatible = "allwinner,sun7i-a20-apb1-gates-clk";
- reg = <0x01c2006c 0x4>;
- clocks = <&apb1>;
- clock-indices = <0>, <1>,
- <2>, <3>, <4>,
- <5>, <6>, <7>,
- <15>, <16>, <17>,
- <18>, <19>, <20>,
- <21>, <22>, <23>;
- clock-output-names = "apb1_i2c0", "apb1_i2c1",
- "apb1_i2c2", "apb1_i2c3", "apb1_can",
- "apb1_scr", "apb1_ps20", "apb1_ps21",
- "apb1_i2c4", "apb1_uart0", "apb1_uart1",
- "apb1_uart2", "apb1_uart3", "apb1_uart4",
- "apb1_uart5", "apb1_uart6", "apb1_uart7";
- };
-
- nand_clk: clk@01c20080 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c20080 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "nand";
- };
-
- ms_clk: clk@01c20084 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c20084 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "ms";
- };
-
- mmc0_clk: clk@01c20088 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-mmc-clk";
- reg = <0x01c20088 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "mmc0",
- "mmc0_output",
- "mmc0_sample";
- };
-
- mmc1_clk: clk@01c2008c {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-mmc-clk";
- reg = <0x01c2008c 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "mmc1",
- "mmc1_output",
- "mmc1_sample";
- };
-
- mmc2_clk: clk@01c20090 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-mmc-clk";
- reg = <0x01c20090 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "mmc2",
- "mmc2_output",
- "mmc2_sample";
- };
-
- mmc3_clk: clk@01c20094 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-mmc-clk";
- reg = <0x01c20094 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "mmc3",
- "mmc3_output",
- "mmc3_sample";
- };
-
- ts_clk: clk@01c20098 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c20098 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "ts";
- };
-
- ss_clk: clk@01c2009c {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c2009c 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "ss";
- };
-
- spi0_clk: clk@01c200a0 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200a0 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "spi0";
- };
-
- spi1_clk: clk@01c200a4 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200a4 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "spi1";
- };
-
- spi2_clk: clk@01c200a8 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200a8 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "spi2";
- };
-
- pata_clk: clk@01c200ac {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200ac 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "pata";
- };
-
- ir0_clk: clk@01c200b0 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200b0 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "ir0";
- };
-
- ir1_clk: clk@01c200b4 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200b4 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "ir1";
- };
-
- i2s0_clk: clk@01c200b8 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod1-clk";
- reg = <0x01c200b8 0x4>;
- clocks = <&pll2 SUN4I_A10_PLL2_8X>,
- <&pll2 SUN4I_A10_PLL2_4X>,
- <&pll2 SUN4I_A10_PLL2_2X>,
- <&pll2 SUN4I_A10_PLL2_1X>;
- clock-output-names = "i2s0";
- };
-
- ac97_clk: clk@01c200bc {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod1-clk";
- reg = <0x01c200bc 0x4>;
- clocks = <&pll2 SUN4I_A10_PLL2_8X>,
- <&pll2 SUN4I_A10_PLL2_4X>,
- <&pll2 SUN4I_A10_PLL2_2X>,
- <&pll2 SUN4I_A10_PLL2_1X>;
- clock-output-names = "ac97";
- };
-
- spdif_clk: clk@01c200c0 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod1-clk";
- reg = <0x01c200c0 0x4>;
- clocks = <&pll2 SUN4I_A10_PLL2_8X>,
- <&pll2 SUN4I_A10_PLL2_4X>,
- <&pll2 SUN4I_A10_PLL2_2X>,
- <&pll2 SUN4I_A10_PLL2_1X>;
- clock-output-names = "spdif";
- };
-
- keypad_clk: clk@01c200c4 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200c4 0x4>;
- clocks = <&osc24M>;
- clock-output-names = "keypad";
- };
-
- usb_clk: clk@01c200cc {
- #clock-cells = <1>;
- #reset-cells = <1>;
- compatible = "allwinner,sun4i-a10-usb-clk";
- reg = <0x01c200cc 0x4>;
- clocks = <&pll6 1>;
- clock-output-names = "usb_ohci0", "usb_ohci1",
- "usb_phy";
- };
-
- spi3_clk: clk@01c200d4 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200d4 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "spi3";
- };
-
- i2s1_clk: clk@01c200d8 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod1-clk";
- reg = <0x01c200d8 0x4>;
- clocks = <&pll2 SUN4I_A10_PLL2_8X>,
- <&pll2 SUN4I_A10_PLL2_4X>,
- <&pll2 SUN4I_A10_PLL2_2X>,
- <&pll2 SUN4I_A10_PLL2_1X>;
- clock-output-names = "i2s1";
- };
-
- i2s2_clk: clk@01c200dc {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-mod1-clk";
- reg = <0x01c200dc 0x4>;
- clocks = <&pll2 SUN4I_A10_PLL2_8X>,
- <&pll2 SUN4I_A10_PLL2_4X>,
- <&pll2 SUN4I_A10_PLL2_2X>,
- <&pll2 SUN4I_A10_PLL2_1X>;
- clock-output-names = "i2s2";
- };
-
- dram_gates: clk@01c20100 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-a10-dram-gates-clk";
- reg = <0x01c20100 0x4>;
- clocks = <&pll5 0>;
- clock-indices = <0>,
- <1>, <2>,
- <3>,
- <4>,
- <5>, <6>,
- <15>,
- <24>, <25>,
- <26>, <27>,
- <28>, <29>;
- clock-output-names = "dram_ve",
- "dram_csi0", "dram_csi1",
- "dram_ts",
- "dram_tvd",
- "dram_tve0", "dram_tve1",
- "dram_output",
- "dram_de_fe1", "dram_de_fe0",
- "dram_de_be0", "dram_de_be1",
- "dram_de_mp", "dram_ace";
- };
-
- de_be0_clk: clk@01c20104 {
- #clock-cells = <0>;
- #reset-cells = <0>;
- compatible = "allwinner,sun4i-a10-display-clk";
- reg = <0x01c20104 0x4>;
- clocks = <&pll3>, <&pll7>, <&pll5 1>;
- clock-output-names = "de-be0";
- };
-
- de_be1_clk: clk@01c20108 {
- #clock-cells = <0>;
- #reset-cells = <0>;
- compatible = "allwinner,sun4i-a10-display-clk";
- reg = <0x01c20108 0x4>;
- clocks = <&pll3>, <&pll7>, <&pll5 1>;
- clock-output-names = "de-be1";
- };
-
- de_fe0_clk: clk@01c2010c {
- #clock-cells = <0>;
- #reset-cells = <0>;
- compatible = "allwinner,sun4i-a10-display-clk";
- reg = <0x01c2010c 0x4>;
- clocks = <&pll3>, <&pll7>, <&pll5 1>;
- clock-output-names = "de-fe0";
- };
-
- de_fe1_clk: clk@01c20110 {
- #clock-cells = <0>;
- #reset-cells = <0>;
- compatible = "allwinner,sun4i-a10-display-clk";
- reg = <0x01c20110 0x4>;
- clocks = <&pll3>, <&pll7>, <&pll5 1>;
- clock-output-names = "de-fe1";
- };
-
- tcon0_ch0_clk: clk@01c20118 {
- #clock-cells = <0>;
- #reset-cells = <1>;
- compatible = "allwinner,sun4i-a10-tcon-ch0-clk";
- reg = <0x01c20118 0x4>;
- clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>;
- clock-output-names = "tcon0-ch0-sclk";
-
- };
-
- tcon1_ch0_clk: clk@01c2011c {
- #clock-cells = <0>;
- #reset-cells = <1>;
- compatible = "allwinner,sun4i-a10-tcon-ch1-clk";
- reg = <0x01c2011c 0x4>;
- clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>;
- clock-output-names = "tcon1-ch0-sclk";
-
- };
-
- tcon0_ch1_clk: clk@01c2012c {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-tcon-ch0-clk";
- reg = <0x01c2012c 0x4>;
- clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>;
- clock-output-names = "tcon0-ch1-sclk";
-
- };
-
- tcon1_ch1_clk: clk@01c20130 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-tcon-ch1-clk";
- reg = <0x01c20130 0x4>;
- clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>;
- clock-output-names = "tcon1-ch1-sclk";
-
- };
-
- ve_clk: clk@01c2013c {
- #clock-cells = <0>;
- #reset-cells = <0>;
- compatible = "allwinner,sun4i-a10-ve-clk";
- reg = <0x01c2013c 0x4>;
- clocks = <&pll4>;
- clock-output-names = "ve";
- };
-
- codec_clk: clk@01c20140 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-a10-codec-clk";
- reg = <0x01c20140 0x4>;
- clocks = <&pll2 SUN4I_A10_PLL2_1X>;
- clock-output-names = "codec";
- };
-
- mbus_clk: clk@01c2015c {
- #clock-cells = <0>;
- compatible = "allwinner,sun5i-a13-mbus-clk";
- reg = <0x01c2015c 0x4>;
- clocks = <&osc24M>, <&pll6 2>, <&pll5 1>;
- clock-output-names = "mbus";
- };
-
/*
* The following two are dummy clocks, placeholders
* used in the gmac_tx clock. The gmac driver will
@@ -737,71 +203,50 @@
* The actual TX clock rate is not controlled by the
* gmac_tx clock.
*/
- mii_phy_tx_clk: clk@2 {
+ mii_phy_tx_clk: clk@1 {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <25000000>;
clock-output-names = "mii_phy_tx";
};
- gmac_int_tx_clk: clk@3 {
+ gmac_int_tx_clk: clk@2 {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <125000000>;
clock-output-names = "gmac_int_tx";
};
- gmac_tx_clk: clk@01c20164 {
+ gmac_tx_clk: clk@1c20164 {
#clock-cells = <0>;
compatible = "allwinner,sun7i-a20-gmac-clk";
reg = <0x01c20164 0x4>;
clocks = <&mii_phy_tx_clk>, <&gmac_int_tx_clk>;
clock-output-names = "gmac_tx";
};
-
- /*
- * Dummy clock used by output clocks
- */
- osc24M_32k: clk@1 {
- #clock-cells = <0>;
- compatible = "fixed-factor-clock";
- clock-div = <750>;
- clock-mult = <1>;
- clocks = <&osc24M>;
- clock-output-names = "osc24M_32k";
- };
-
- clk_out_a: clk@01c201f0 {
- #clock-cells = <0>;
- compatible = "allwinner,sun7i-a20-out-clk";
- reg = <0x01c201f0 0x4>;
- clocks = <&osc24M_32k>, <&osc32k>, <&osc24M>;
- clock-output-names = "clk_out_a";
- };
-
- clk_out_b: clk@01c201f4 {
- #clock-cells = <0>;
- compatible = "allwinner,sun7i-a20-out-clk";
- reg = <0x01c201f4 0x4>;
- clocks = <&osc24M_32k>, <&osc32k>, <&osc24M>;
- clock-output-names = "clk_out_b";
- };
};
- soc@01c00000 {
+
+ de: display-engine {
+ compatible = "allwinner,sun7i-a20-display-engine";
+ allwinner,pipelines = <&fe0>, <&fe1>;
+ status = "disabled";
+ };
+
+ soc@1c00000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
- sram-controller@01c00000 {
+ sram-controller@1c00000 {
compatible = "allwinner,sun4i-a10-sram-controller";
reg = <0x01c00000 0x30>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
- sram_a: sram@00000000 {
+ sram_a: sram@0 {
compatible = "mmio-sram";
reg = <0x00000000 0xc000>;
#address-cells = <1>;
@@ -815,14 +260,14 @@
};
};
- sram_d: sram@00010000 {
+ sram_d: sram@10000 {
compatible = "mmio-sram";
reg = <0x00010000 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x00010000 0x1000>;
- otg_sram: sram-section@0000 {
+ otg_sram: sram-section@0 {
compatible = "allwinner,sun4i-a10-sram-d";
reg = <0x0000 0x1000>;
status = "disabled";
@@ -830,7 +275,7 @@
};
};
- nmi_intc: interrupt-controller@01c00030 {
+ nmi_intc: interrupt-controller@1c00030 {
compatible = "allwinner,sun7i-a20-sc-nmi";
interrupt-controller;
#interrupt-cells = <2>;
@@ -838,19 +283,19 @@
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
};
- dma: dma-controller@01c02000 {
+ dma: dma-controller@1c02000 {
compatible = "allwinner,sun4i-a10-dma";
reg = <0x01c02000 0x1000>;
interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ahb_gates 6>;
+ clocks = <&ccu CLK_AHB_DMA>;
#dma-cells = <2>;
};
- nfc: nand@01c03000 {
+ nfc: nand@1c03000 {
compatible = "allwinner,sun4i-a10-nand";
reg = <0x01c03000 0x1000>;
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ahb_gates 13>, <&nand_clk>;
+ clocks = <&ccu CLK_AHB_NAND>, <&ccu CLK_NAND>;
clock-names = "ahb", "mod";
dmas = <&dma SUN4I_DMA_DEDICATED 3>;
dma-names = "rxtx";
@@ -859,11 +304,11 @@
#size-cells = <0>;
};
- spi0: spi@01c05000 {
+ spi0: spi@1c05000 {
compatible = "allwinner,sun4i-a10-spi";
reg = <0x01c05000 0x1000>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ahb_gates 20>, <&spi0_clk>;
+ clocks = <&ccu CLK_AHB_SPI0>, <&ccu CLK_SPI0>;
clock-names = "ahb", "mod";
dmas = <&dma SUN4I_DMA_DEDICATED 27>,
<&dma SUN4I_DMA_DEDICATED 26>;
@@ -871,13 +316,14 @@
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
+ num-cs = <4>;
};
- spi1: spi@01c06000 {
+ spi1: spi@1c06000 {
compatible = "allwinner,sun4i-a10-spi";
reg = <0x01c06000 0x1000>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ahb_gates 21>, <&spi1_clk>;
+ clocks = <&ccu CLK_AHB_SPI1>, <&ccu CLK_SPI1>;
clock-names = "ahb", "mod";
dmas = <&dma SUN4I_DMA_DEDICATED 9>,
<&dma SUN4I_DMA_DEDICATED 8>;
@@ -885,18 +331,19 @@
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
+ num-cs = <1>;
};
- emac: ethernet@01c0b000 {
+ emac: ethernet@1c0b000 {
compatible = "allwinner,sun4i-a10-emac";
reg = <0x01c0b000 0x1000>;
interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ahb_gates 17>;
+ clocks = <&ccu CLK_AHB_EMAC>;
allwinner,sram = <&emac_sram 1>;
status = "disabled";
};
- mdio: mdio@01c0b080 {
+ mdio: mdio@1c0b080 {
compatible = "allwinner,sun4i-a10-mdio";
reg = <0x01c0b080 0x14>;
status = "disabled";
@@ -904,14 +351,111 @@
#size-cells = <0>;
};
- mmc0: mmc@01c0f000 {
- compatible = "allwinner,sun7i-a20-mmc",
- "allwinner,sun5i-a13-mmc";
+ tcon0: lcd-controller@1c0c000 {
+ compatible = "allwinner,sun7i-a20-tcon";
+ reg = <0x01c0c000 0x1000>;
+ interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&ccu RST_TCON0>;
+ reset-names = "lcd";
+ clocks = <&ccu CLK_AHB_LCD0>,
+ <&ccu CLK_TCON0_CH0>,
+ <&ccu CLK_TCON0_CH1>;
+ clock-names = "ahb",
+ "tcon-ch0",
+ "tcon-ch1";
+ clock-output-names = "tcon0-pixel-clock";
+ dmas = <&dma SUN4I_DMA_DEDICATED 14>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ tcon0_in: port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ tcon0_in_be0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&be0_out_tcon0>;
+ };
+
+ tcon0_in_be1: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&be1_out_tcon0>;
+ };
+ };
+
+ tcon0_out: port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ tcon0_out_hdmi: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&hdmi_in_tcon0>;
+ allwinner,tcon-channel = <1>;
+ };
+ };
+ };
+ };
+
+ tcon1: lcd-controller@1c0d000 {
+ compatible = "allwinner,sun7i-a20-tcon";
+ reg = <0x01c0d000 0x1000>;
+ interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&ccu RST_TCON1>;
+ reset-names = "lcd";
+ clocks = <&ccu CLK_AHB_LCD1>,
+ <&ccu CLK_TCON1_CH0>,
+ <&ccu CLK_TCON1_CH1>;
+ clock-names = "ahb",
+ "tcon-ch0",
+ "tcon-ch1";
+ clock-output-names = "tcon1-pixel-clock";
+ dmas = <&dma SUN4I_DMA_DEDICATED 15>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ tcon1_in: port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ tcon1_in_be0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&be0_out_tcon1>;
+ };
+
+ tcon1_in_be1: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&be1_out_tcon1>;
+ };
+ };
+
+ tcon1_out: port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ tcon1_out_hdmi: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&hdmi_in_tcon1>;
+ allwinner,tcon-channel = <1>;
+ };
+ };
+ };
+ };
+
+ mmc0: mmc@1c0f000 {
+ compatible = "allwinner,sun7i-a20-mmc";
reg = <0x01c0f000 0x1000>;
- clocks = <&ahb_gates 8>,
- <&mmc0_clk 0>,
- <&mmc0_clk 1>,
- <&mmc0_clk 2>;
+ clocks = <&ccu CLK_AHB_MMC0>,
+ <&ccu CLK_MMC0>,
+ <&ccu CLK_MMC0_OUTPUT>,
+ <&ccu CLK_MMC0_SAMPLE>;
clock-names = "ahb",
"mmc",
"output",
@@ -922,14 +466,13 @@
#size-cells = <0>;
};
- mmc1: mmc@01c10000 {
- compatible = "allwinner,sun7i-a20-mmc",
- "allwinner,sun5i-a13-mmc";
+ mmc1: mmc@1c10000 {
+ compatible = "allwinner,sun7i-a20-mmc";
reg = <0x01c10000 0x1000>;
- clocks = <&ahb_gates 9>,
- <&mmc1_clk 0>,
- <&mmc1_clk 1>,
- <&mmc1_clk 2>;
+ clocks = <&ccu CLK_AHB_MMC1>,
+ <&ccu CLK_MMC1>,
+ <&ccu CLK_MMC1_OUTPUT>,
+ <&ccu CLK_MMC1_SAMPLE>;
clock-names = "ahb",
"mmc",
"output",
@@ -940,14 +483,13 @@
#size-cells = <0>;
};
- mmc2: mmc@01c11000 {
- compatible = "allwinner,sun7i-a20-mmc",
- "allwinner,sun5i-a13-mmc";
+ mmc2: mmc@1c11000 {
+ compatible = "allwinner,sun7i-a20-mmc";
reg = <0x01c11000 0x1000>;
- clocks = <&ahb_gates 10>,
- <&mmc2_clk 0>,
- <&mmc2_clk 1>,
- <&mmc2_clk 2>;
+ clocks = <&ccu CLK_AHB_MMC2>,
+ <&ccu CLK_MMC2>,
+ <&ccu CLK_MMC2_OUTPUT>,
+ <&ccu CLK_MMC2_SAMPLE>;
clock-names = "ahb",
"mmc",
"output",
@@ -958,14 +500,13 @@
#size-cells = <0>;
};
- mmc3: mmc@01c12000 {
- compatible = "allwinner,sun7i-a20-mmc",
- "allwinner,sun5i-a13-mmc";
+ mmc3: mmc@1c12000 {
+ compatible = "allwinner,sun7i-a20-mmc";
reg = <0x01c12000 0x1000>;
- clocks = <&ahb_gates 11>,
- <&mmc3_clk 0>,
- <&mmc3_clk 1>,
- <&mmc3_clk 2>;
+ clocks = <&ccu CLK_AHB_MMC3>,
+ <&ccu CLK_MMC3>,
+ <&ccu CLK_MMC3_OUTPUT>,
+ <&ccu CLK_MMC3_SAMPLE>;
clock-names = "ahb",
"mmc",
"output",
@@ -976,10 +517,10 @@
#size-cells = <0>;
};
- usb_otg: usb@01c13000 {
+ usb_otg: usb@1c13000 {
compatible = "allwinner,sun4i-a10-musb";
reg = <0x01c13000 0x0400>;
- clocks = <&ahb_gates 0>;
+ clocks = <&ccu CLK_AHB_OTG>;
interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "mc";
phys = <&usbphy 0>;
@@ -989,51 +530,97 @@
status = "disabled";
};
- usbphy: phy@01c13400 {
+ usbphy: phy@1c13400 {
#phy-cells = <1>;
compatible = "allwinner,sun7i-a20-usb-phy";
reg = <0x01c13400 0x10 0x01c14800 0x4 0x01c1c800 0x4>;
reg-names = "phy_ctrl", "pmu1", "pmu2";
- clocks = <&usb_clk 8>;
+ clocks = <&ccu CLK_USB_PHY>;
clock-names = "usb_phy";
- resets = <&usb_clk 0>, <&usb_clk 1>, <&usb_clk 2>;
+ resets = <&ccu RST_USB_PHY0>,
+ <&ccu RST_USB_PHY1>,
+ <&ccu RST_USB_PHY2>;
reset-names = "usb0_reset", "usb1_reset", "usb2_reset";
status = "disabled";
};
- ehci0: usb@01c14000 {
+ ehci0: usb@1c14000 {
compatible = "allwinner,sun7i-a20-ehci", "generic-ehci";
reg = <0x01c14000 0x100>;
interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ahb_gates 1>;
+ clocks = <&ccu CLK_AHB_EHCI0>;
phys = <&usbphy 1>;
phy-names = "usb";
status = "disabled";
};
- ohci0: usb@01c14400 {
+ ohci0: usb@1c14400 {
compatible = "allwinner,sun7i-a20-ohci", "generic-ohci";
reg = <0x01c14400 0x100>;
interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&usb_clk 6>, <&ahb_gates 2>;
+ clocks = <&ccu CLK_USB_OHCI0>, <&ccu CLK_AHB_OHCI0>;
phys = <&usbphy 1>;
phy-names = "usb";
status = "disabled";
};
- crypto: crypto-engine@01c15000 {
- compatible = "allwinner,sun4i-a10-crypto";
+ crypto: crypto-engine@1c15000 {
+ compatible = "allwinner,sun7i-a20-crypto",
+ "allwinner,sun4i-a10-crypto";
reg = <0x01c15000 0x1000>;
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ahb_gates 5>, <&ss_clk>;
+ clocks = <&ccu CLK_AHB_SS>, <&ccu CLK_SS>;
clock-names = "ahb", "mod";
};
- spi2: spi@01c17000 {
+ hdmi: hdmi@1c16000 {
+ compatible = "allwinner,sun7i-a20-hdmi",
+ "allwinner,sun5i-a10s-hdmi";
+ reg = <0x01c16000 0x1000>;
+ interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_AHB_HDMI0>, <&ccu CLK_HDMI>,
+ <&ccu CLK_PLL_VIDEO0_2X>,
+ <&ccu CLK_PLL_VIDEO1_2X>;
+ clock-names = "ahb", "mod", "pll-0", "pll-1";
+ dmas = <&dma SUN4I_DMA_NORMAL 16>,
+ <&dma SUN4I_DMA_NORMAL 16>,
+ <&dma SUN4I_DMA_DEDICATED 24>;
+ dma-names = "ddc-tx", "ddc-rx", "audio-tx";
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hdmi_in: port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ hdmi_in_tcon0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&tcon0_out_hdmi>;
+ };
+
+ hdmi_in_tcon1: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&tcon1_out_hdmi>;
+ };
+ };
+
+ hdmi_out: port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+ };
+ };
+
+ spi2: spi@1c17000 {
compatible = "allwinner,sun4i-a10-spi";
reg = <0x01c17000 0x1000>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ahb_gates 22>, <&spi2_clk>;
+ clocks = <&ccu CLK_AHB_SPI2>, <&ccu CLK_SPI2>;
clock-names = "ahb", "mod";
dmas = <&dma SUN4I_DMA_DEDICATED 29>,
<&dma SUN4I_DMA_DEDICATED 28>;
@@ -1041,41 +628,42 @@
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
+ num-cs = <1>;
};
- ahci: sata@01c18000 {
+ ahci: sata@1c18000 {
compatible = "allwinner,sun4i-a10-ahci";
reg = <0x01c18000 0x1000>;
interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&pll6 0>, <&ahb_gates 25>;
+ clocks = <&ccu CLK_AHB_SATA>, <&ccu CLK_SATA>;
status = "disabled";
};
- ehci1: usb@01c1c000 {
+ ehci1: usb@1c1c000 {
compatible = "allwinner,sun7i-a20-ehci", "generic-ehci";
reg = <0x01c1c000 0x100>;
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ahb_gates 3>;
+ clocks = <&ccu CLK_AHB_EHCI1>;
phys = <&usbphy 2>;
phy-names = "usb";
status = "disabled";
};
- ohci1: usb@01c1c400 {
+ ohci1: usb@1c1c400 {
compatible = "allwinner,sun7i-a20-ohci", "generic-ohci";
reg = <0x01c1c400 0x100>;
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&usb_clk 7>, <&ahb_gates 4>;
+ clocks = <&ccu CLK_USB_OHCI1>, <&ccu CLK_AHB_OHCI1>;
phys = <&usbphy 2>;
phy-names = "usb";
status = "disabled";
};
- spi3: spi@01c1f000 {
+ spi3: spi@1c1f000 {
compatible = "allwinner,sun4i-a10-spi";
reg = <0x01c1f000 0x1000>;
interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ahb_gates 23>, <&spi3_clk>;
+ clocks = <&ccu CLK_AHB_SPI3>, <&ccu CLK_SPI3>;
clock-names = "ahb", "mod";
dmas = <&dma SUN4I_DMA_DEDICATED 31>,
<&dma SUN4I_DMA_DEDICATED 30>;
@@ -1083,319 +671,258 @@
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
+ num-cs = <1>;
};
- pio: pinctrl@01c20800 {
+ ccu: clock@1c20000 {
+ compatible = "allwinner,sun7i-a20-ccu";
+ reg = <0x01c20000 0x400>;
+ clocks = <&osc24M>, <&osc32k>;
+ clock-names = "hosc", "losc";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ pio: pinctrl@1c20800 {
compatible = "allwinner,sun7i-a20-pinctrl";
reg = <0x01c20800 0x400>;
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb0_gates 5>;
+ clocks = <&ccu CLK_APB0_PIO>, <&osc24M>, <&osc32k>;
+ clock-names = "apb", "hosc", "losc";
gpio-controller;
interrupt-controller;
#interrupt-cells = <3>;
#gpio-cells = <3>;
+ can0_pins_a: can0@0 {
+ pins = "PH20", "PH21";
+ function = "can";
+ };
+
clk_out_a_pins_a: clk_out_a@0 {
- allwinner,pins = "PI12";
- allwinner,function = "clk_out_a";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PI12";
+ function = "clk_out_a";
};
clk_out_b_pins_a: clk_out_b@0 {
- allwinner,pins = "PI13";
- allwinner,function = "clk_out_b";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PI13";
+ function = "clk_out_b";
};
emac_pins_a: emac0@0 {
- allwinner,pins = "PA0", "PA1", "PA2",
- "PA3", "PA4", "PA5", "PA6",
- "PA7", "PA8", "PA9", "PA10",
- "PA11", "PA12", "PA13", "PA14",
- "PA15", "PA16";
- allwinner,function = "emac";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PA0", "PA1", "PA2",
+ "PA3", "PA4", "PA5", "PA6",
+ "PA7", "PA8", "PA9", "PA10",
+ "PA11", "PA12", "PA13", "PA14",
+ "PA15", "PA16";
+ function = "emac";
};
gmac_pins_mii_a: gmac_mii@0 {
- allwinner,pins = "PA0", "PA1", "PA2",
- "PA3", "PA4", "PA5", "PA6",
- "PA7", "PA8", "PA9", "PA10",
- "PA11", "PA12", "PA13", "PA14",
- "PA15", "PA16";
- allwinner,function = "gmac";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PA0", "PA1", "PA2",
+ "PA3", "PA4", "PA5", "PA6",
+ "PA7", "PA8", "PA9", "PA10",
+ "PA11", "PA12", "PA13", "PA14",
+ "PA15", "PA16";
+ function = "gmac";
};
gmac_pins_rgmii_a: gmac_rgmii@0 {
- allwinner,pins = "PA0", "PA1", "PA2",
- "PA3", "PA4", "PA5", "PA6",
- "PA7", "PA8", "PA10",
- "PA11", "PA12", "PA13",
- "PA15", "PA16";
- allwinner,function = "gmac";
+ pins = "PA0", "PA1", "PA2",
+ "PA3", "PA4", "PA5", "PA6",
+ "PA7", "PA8", "PA10",
+ "PA11", "PA12", "PA13",
+ "PA15", "PA16";
+ function = "gmac";
/*
* data lines in RGMII mode use DDR mode
* and need a higher signal drive strength
*/
- allwinner,drive = <SUN4I_PINCTRL_40_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ drive-strength = <40>;
};
i2c0_pins_a: i2c0@0 {
- allwinner,pins = "PB0", "PB1";
- allwinner,function = "i2c0";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PB0", "PB1";
+ function = "i2c0";
};
i2c1_pins_a: i2c1@0 {
- allwinner,pins = "PB18", "PB19";
- allwinner,function = "i2c1";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PB18", "PB19";
+ function = "i2c1";
};
i2c2_pins_a: i2c2@0 {
- allwinner,pins = "PB20", "PB21";
- allwinner,function = "i2c2";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PB20", "PB21";
+ function = "i2c2";
};
i2c3_pins_a: i2c3@0 {
- allwinner,pins = "PI0", "PI1";
- allwinner,function = "i2c3";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PI0", "PI1";
+ function = "i2c3";
};
ir0_rx_pins_a: ir0@0 {
- allwinner,pins = "PB4";
- allwinner,function = "ir0";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PB4";
+ function = "ir0";
};
ir0_tx_pins_a: ir0@1 {
- allwinner,pins = "PB3";
- allwinner,function = "ir0";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PB3";
+ function = "ir0";
};
ir1_rx_pins_a: ir1@0 {
- allwinner,pins = "PB23";
- allwinner,function = "ir1";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PB23";
+ function = "ir1";
};
ir1_tx_pins_a: ir1@1 {
- allwinner,pins = "PB22";
- allwinner,function = "ir1";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PB22";
+ function = "ir1";
};
mmc0_pins_a: mmc0@0 {
- allwinner,pins = "PF0", "PF1", "PF2",
- "PF3", "PF4", "PF5";
- allwinner,function = "mmc0";
- allwinner,drive = <SUN4I_PINCTRL_30_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
-
- mmc0_cd_pin_reference_design: mmc0_cd_pin@0 {
- allwinner,pins = "PH1";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PF0", "PF1", "PF2",
+ "PF3", "PF4", "PF5";
+ function = "mmc0";
+ drive-strength = <30>;
+ bias-pull-up;
};
mmc2_pins_a: mmc2@0 {
- allwinner,pins = "PC6", "PC7", "PC8",
- "PC9", "PC10", "PC11";
- allwinner,function = "mmc2";
- allwinner,drive = <SUN4I_PINCTRL_30_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PC6", "PC7", "PC8",
+ "PC9", "PC10", "PC11";
+ function = "mmc2";
+ drive-strength = <30>;
+ bias-pull-up;
};
mmc3_pins_a: mmc3@0 {
- allwinner,pins = "PI4", "PI5", "PI6",
- "PI7", "PI8", "PI9";
- allwinner,function = "mmc3";
- allwinner,drive = <SUN4I_PINCTRL_30_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PI4", "PI5", "PI6",
+ "PI7", "PI8", "PI9";
+ function = "mmc3";
+ drive-strength = <30>;
+ bias-pull-up;
};
ps20_pins_a: ps20@0 {
- allwinner,pins = "PI20", "PI21";
- allwinner,function = "ps2";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PI20", "PI21";
+ function = "ps2";
};
ps21_pins_a: ps21@0 {
- allwinner,pins = "PH12", "PH13";
- allwinner,function = "ps2";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH12", "PH13";
+ function = "ps2";
};
pwm0_pins_a: pwm0@0 {
- allwinner,pins = "PB2";
- allwinner,function = "pwm";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PB2";
+ function = "pwm";
};
pwm1_pins_a: pwm1@0 {
- allwinner,pins = "PI3";
- allwinner,function = "pwm";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PI3";
+ function = "pwm";
};
spdif_tx_pins_a: spdif@0 {
- allwinner,pins = "PB13";
- allwinner,function = "spdif";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ pins = "PB13";
+ function = "spdif";
+ bias-pull-up;
};
spi0_pins_a: spi0@0 {
- allwinner,pins = "PI11", "PI12", "PI13";
- allwinner,function = "spi0";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PI11", "PI12", "PI13";
+ function = "spi0";
};
spi0_cs0_pins_a: spi0_cs0@0 {
- allwinner,pins = "PI10";
- allwinner,function = "spi0";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PI10";
+ function = "spi0";
};
spi0_cs1_pins_a: spi0_cs1@0 {
- allwinner,pins = "PI14";
- allwinner,function = "spi0";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PI14";
+ function = "spi0";
};
spi1_pins_a: spi1@0 {
- allwinner,pins = "PI17", "PI18", "PI19";
- allwinner,function = "spi1";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PI17", "PI18", "PI19";
+ function = "spi1";
};
spi1_cs0_pins_a: spi1_cs0@0 {
- allwinner,pins = "PI16";
- allwinner,function = "spi1";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PI16";
+ function = "spi1";
};
spi2_pins_a: spi2@0 {
- allwinner,pins = "PC20", "PC21", "PC22";
- allwinner,function = "spi2";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PC20", "PC21", "PC22";
+ function = "spi2";
};
spi2_pins_b: spi2@1 {
- allwinner,pins = "PB15", "PB16", "PB17";
- allwinner,function = "spi2";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PB15", "PB16", "PB17";
+ function = "spi2";
};
spi2_cs0_pins_a: spi2_cs0@0 {
- allwinner,pins = "PC19";
- allwinner,function = "spi2";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PC19";
+ function = "spi2";
};
spi2_cs0_pins_b: spi2_cs0@1 {
- allwinner,pins = "PB14";
- allwinner,function = "spi2";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PB14";
+ function = "spi2";
};
uart0_pins_a: uart0@0 {
- allwinner,pins = "PB22", "PB23";
- allwinner,function = "uart0";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PB22", "PB23";
+ function = "uart0";
};
uart2_pins_a: uart2@0 {
- allwinner,pins = "PI16", "PI17", "PI18", "PI19";
- allwinner,function = "uart2";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PI16", "PI17", "PI18", "PI19";
+ function = "uart2";
};
uart3_pins_a: uart3@0 {
- allwinner,pins = "PG6", "PG7", "PG8", "PG9";
- allwinner,function = "uart3";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PG6", "PG7", "PG8", "PG9";
+ function = "uart3";
};
uart3_pins_b: uart3@1 {
- allwinner,pins = "PH0", "PH1";
- allwinner,function = "uart3";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH0", "PH1";
+ function = "uart3";
};
uart4_pins_a: uart4@0 {
- allwinner,pins = "PG10", "PG11";
- allwinner,function = "uart4";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PG10", "PG11";
+ function = "uart4";
};
uart4_pins_b: uart4@1 {
- allwinner,pins = "PH4", "PH5";
- allwinner,function = "uart4";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PH4", "PH5";
+ function = "uart4";
};
uart5_pins_a: uart5@0 {
- allwinner,pins = "PI10", "PI11";
- allwinner,function = "uart5";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PI10", "PI11";
+ function = "uart5";
};
uart6_pins_a: uart6@0 {
- allwinner,pins = "PI12", "PI13";
- allwinner,function = "uart6";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PI12", "PI13";
+ function = "uart6";
};
uart7_pins_a: uart7@0 {
- allwinner,pins = "PI20", "PI21";
- allwinner,function = "uart7";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ pins = "PI20", "PI21";
+ function = "uart7";
};
};
- timer@01c20c00 {
+ timer@1c20c00 {
compatible = "allwinner,sun4i-a10-timer";
reg = <0x01c20c00 0x90>;
interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
@@ -1407,18 +934,18 @@
clocks = <&osc24M>;
};
- wdt: watchdog@01c20c90 {
+ wdt: watchdog@1c20c90 {
compatible = "allwinner,sun4i-a10-wdt";
reg = <0x01c20c90 0x10>;
};
- rtc: rtc@01c20d00 {
+ rtc: rtc@1c20d00 {
compatible = "allwinner,sun7i-a20-rtc";
reg = <0x01c20d00 0x20>;
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
};
- pwm: pwm@01c20e00 {
+ pwm: pwm@1c20e00 {
compatible = "allwinner,sun7i-a20-pwm";
reg = <0x01c20e00 0xc>;
clocks = <&osc24M>;
@@ -1426,12 +953,12 @@
status = "disabled";
};
- spdif: spdif@01c21000 {
+ spdif: spdif@1c21000 {
#sound-dai-cells = <0>;
compatible = "allwinner,sun4i-a10-spdif";
reg = <0x01c21000 0x400>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb0_gates 1>, <&spdif_clk>;
+ clocks = <&ccu CLK_APB0_SPDIF>, <&ccu CLK_SPDIF>;
clock-names = "apb", "spdif";
dmas = <&dma SUN4I_DMA_NORMAL 2>,
<&dma SUN4I_DMA_NORMAL 2>;
@@ -1439,30 +966,30 @@
status = "disabled";
};
- ir0: ir@01c21800 {
+ ir0: ir@1c21800 {
compatible = "allwinner,sun4i-a10-ir";
- clocks = <&apb0_gates 6>, <&ir0_clk>;
+ clocks = <&ccu CLK_APB0_IR0>, <&ccu CLK_IR0>;
clock-names = "apb", "ir";
interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x01c21800 0x40>;
status = "disabled";
};
- ir1: ir@01c21c00 {
+ ir1: ir@1c21c00 {
compatible = "allwinner,sun4i-a10-ir";
- clocks = <&apb0_gates 7>, <&ir1_clk>;
+ clocks = <&ccu CLK_APB0_IR1>, <&ccu CLK_IR1>;
clock-names = "apb", "ir";
interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x01c21c00 0x40>;
status = "disabled";
};
- i2s1: i2s@01c22000 {
+ i2s1: i2s@1c22000 {
#sound-dai-cells = <0>;
compatible = "allwinner,sun4i-a10-i2s";
reg = <0x01c22000 0x400>;
interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb0_gates 4>, <&i2s1_clk>;
+ clocks = <&ccu CLK_APB0_I2S1>, <&ccu CLK_I2S1>;
clock-names = "apb", "mod";
dmas = <&dma SUN4I_DMA_NORMAL 4>,
<&dma SUN4I_DMA_NORMAL 4>;
@@ -1470,12 +997,12 @@
status = "disabled";
};
- i2s0: i2s@01c22400 {
+ i2s0: i2s@1c22400 {
#sound-dai-cells = <0>;
compatible = "allwinner,sun4i-a10-i2s";
reg = <0x01c22400 0x400>;
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb0_gates 3>, <&i2s0_clk>;
+ clocks = <&ccu CLK_APB0_I2S0>, <&ccu CLK_I2S0>;
clock-names = "apb", "mod";
dmas = <&dma SUN4I_DMA_NORMAL 3>,
<&dma SUN4I_DMA_NORMAL 3>;
@@ -1483,19 +1010,19 @@
status = "disabled";
};
- lradc: lradc@01c22800 {
+ lradc: lradc@1c22800 {
compatible = "allwinner,sun4i-a10-lradc-keys";
reg = <0x01c22800 0x100>;
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
- codec: codec@01c22c00 {
+ codec: codec@1c22c00 {
#sound-dai-cells = <0>;
compatible = "allwinner,sun7i-a20-codec";
reg = <0x01c22c00 0x40>;
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb0_gates 0>, <&codec_clk>;
+ clocks = <&ccu CLK_APB0_CODEC>, <&ccu CLK_CODEC>;
clock-names = "apb", "codec";
dmas = <&dma SUN4I_DMA_NORMAL 19>,
<&dma SUN4I_DMA_NORMAL 19>;
@@ -1503,17 +1030,17 @@
status = "disabled";
};
- sid: eeprom@01c23800 {
+ sid: eeprom@1c23800 {
compatible = "allwinner,sun7i-a20-sid";
reg = <0x01c23800 0x200>;
};
- i2s2: i2s@01c24400 {
+ i2s2: i2s@1c24400 {
#sound-dai-cells = <0>;
compatible = "allwinner,sun4i-a10-i2s";
reg = <0x01c24400 0x400>;
interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb0_gates 8>, <&i2s2_clk>;
+ clocks = <&ccu CLK_APB0_I2S2>, <&ccu CLK_I2S2>;
clock-names = "apb", "mod";
dmas = <&dma SUN4I_DMA_NORMAL 6>,
<&dma SUN4I_DMA_NORMAL 6>;
@@ -1521,154 +1048,204 @@
status = "disabled";
};
- rtp: rtp@01c25000 {
+ rtp: rtp@1c25000 {
compatible = "allwinner,sun5i-a13-ts";
reg = <0x01c25000 0x100>;
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
#thermal-sensor-cells = <0>;
};
- uart0: serial@01c28000 {
+ uart0: serial@1c28000 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28000 0x400>;
interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 16>;
+ clocks = <&ccu CLK_APB1_UART0>;
status = "disabled";
};
- uart1: serial@01c28400 {
+ uart1: serial@1c28400 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28400 0x400>;
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 17>;
+ clocks = <&ccu CLK_APB1_UART1>;
status = "disabled";
};
- uart2: serial@01c28800 {
+ uart2: serial@1c28800 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28800 0x400>;
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 18>;
+ clocks = <&ccu CLK_APB1_UART2>;
status = "disabled";
};
- uart3: serial@01c28c00 {
+ uart3: serial@1c28c00 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28c00 0x400>;
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 19>;
+ clocks = <&ccu CLK_APB1_UART3>;
status = "disabled";
};
- uart4: serial@01c29000 {
+ uart4: serial@1c29000 {
compatible = "snps,dw-apb-uart";
reg = <0x01c29000 0x400>;
interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 20>;
+ clocks = <&ccu CLK_APB1_UART4>;
status = "disabled";
};
- uart5: serial@01c29400 {
+ uart5: serial@1c29400 {
compatible = "snps,dw-apb-uart";
reg = <0x01c29400 0x400>;
interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 21>;
+ clocks = <&ccu CLK_APB1_UART5>;
status = "disabled";
};
- uart6: serial@01c29800 {
+ uart6: serial@1c29800 {
compatible = "snps,dw-apb-uart";
reg = <0x01c29800 0x400>;
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 22>;
+ clocks = <&ccu CLK_APB1_UART6>;
status = "disabled";
};
- uart7: serial@01c29c00 {
+ uart7: serial@1c29c00 {
compatible = "snps,dw-apb-uart";
reg = <0x01c29c00 0x400>;
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 23>;
+ clocks = <&ccu CLK_APB1_UART7>;
status = "disabled";
};
- i2c0: i2c@01c2ac00 {
+ ps20: ps2@1c2a000 {
+ compatible = "allwinner,sun4i-a10-ps2";
+ reg = <0x01c2a000 0x400>;
+ interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_APB1_PS20>;
+ status = "disabled";
+ };
+
+ ps21: ps2@1c2a400 {
+ compatible = "allwinner,sun4i-a10-ps2";
+ reg = <0x01c2a400 0x400>;
+ interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_APB1_PS21>;
+ status = "disabled";
+ };
+
+ i2c0: i2c@1c2ac00 {
compatible = "allwinner,sun7i-a20-i2c",
"allwinner,sun4i-a10-i2c";
reg = <0x01c2ac00 0x400>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb1_gates 0>;
+ clocks = <&ccu CLK_APB1_I2C0>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
- i2c1: i2c@01c2b000 {
+ i2c1: i2c@1c2b000 {
compatible = "allwinner,sun7i-a20-i2c",
"allwinner,sun4i-a10-i2c";
reg = <0x01c2b000 0x400>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb1_gates 1>;
+ clocks = <&ccu CLK_APB1_I2C1>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
- i2c2: i2c@01c2b400 {
+ i2c2: i2c@1c2b400 {
compatible = "allwinner,sun7i-a20-i2c",
"allwinner,sun4i-a10-i2c";
reg = <0x01c2b400 0x400>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb1_gates 2>;
+ clocks = <&ccu CLK_APB1_I2C2>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
- i2c3: i2c@01c2b800 {
+ i2c3: i2c@1c2b800 {
compatible = "allwinner,sun7i-a20-i2c",
"allwinner,sun4i-a10-i2c";
reg = <0x01c2b800 0x400>;
interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb1_gates 3>;
+ clocks = <&ccu CLK_APB1_I2C3>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
- i2c4: i2c@01c2c000 {
+ can0: can@1c2bc00 {
+ compatible = "allwinner,sun7i-a20-can",
+ "allwinner,sun4i-a10-can";
+ reg = <0x01c2bc00 0x400>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_APB1_CAN>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@1c2c000 {
compatible = "allwinner,sun7i-a20-i2c",
"allwinner,sun4i-a10-i2c";
reg = <0x01c2c000 0x400>;
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb1_gates 15>;
+ clocks = <&ccu CLK_APB1_I2C4>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
- gmac: ethernet@01c50000 {
+ mali: gpu@1c40000 {
+ compatible = "allwinner,sun7i-a20-mali", "arm,mali-400";
+ reg = <0x01c40000 0x10000>;
+ interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "gp",
+ "gpmmu",
+ "pp0",
+ "ppmmu0",
+ "pp1",
+ "ppmmu1",
+ "pmu";
+ clocks = <&ccu CLK_AHB_GPU>, <&ccu CLK_GPU>;
+ clock-names = "bus", "core";
+ resets = <&ccu RST_GPU>;
+
+ assigned-clocks = <&ccu CLK_GPU>;
+ assigned-clock-rates = <384000000>;
+ };
+
+ gmac: ethernet@1c50000 {
compatible = "allwinner,sun7i-a20-gmac";
reg = <0x01c50000 0x10000>;
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq";
- clocks = <&ahb_gates 49>, <&gmac_tx_clk>;
+ clocks = <&ccu CLK_AHB_GMAC>, <&gmac_tx_clk>;
clock-names = "stmmaceth", "allwinner_gmac_tx";
snps,pbl = <2>;
snps,fixed-burst;
@@ -1678,20 +1255,20 @@
#size-cells = <0>;
};
- hstimer@01c60000 {
+ hstimer@1c60000 {
compatible = "allwinner,sun7i-a20-hstimer";
reg = <0x01c60000 0x1000>;
interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ahb_gates 28>;
+ clocks = <&ccu CLK_AHB_HSTIMER>;
};
- gic: interrupt-controller@01c81000 {
- compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
+ gic: interrupt-controller@1c81000 {
+ compatible = "arm,gic-400", "arm,cortex-a7-gic", "arm,cortex-a15-gic";
reg = <0x01c81000 0x1000>,
- <0x01c82000 0x1000>,
+ <0x01c82000 0x2000>,
<0x01c84000 0x2000>,
<0x01c86000 0x2000>;
interrupt-controller;
@@ -1699,20 +1276,164 @@
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
};
- ps20: ps2@01c2a000 {
- compatible = "allwinner,sun4i-a10-ps2";
- reg = <0x01c2a000 0x400>;
- interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb1_gates 6>;
- status = "disabled";
+ fe0: display-frontend@1e00000 {
+ compatible = "allwinner,sun7i-a20-display-frontend";
+ reg = <0x01e00000 0x20000>;
+ interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_AHB_DE_FE0>, <&ccu CLK_DE_FE0>,
+ <&ccu CLK_DRAM_DE_FE0>;
+ clock-names = "ahb", "mod",
+ "ram";
+ resets = <&ccu RST_DE_FE0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fe0_out: port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ fe0_out_be0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&be0_in_fe0>;
+ };
+
+ fe0_out_be1: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&be1_in_fe0>;
+ };
+ };
+ };
};
- ps21: ps2@01c2a400 {
- compatible = "allwinner,sun4i-a10-ps2";
- reg = <0x01c2a400 0x400>;
- interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb1_gates 7>;
- status = "disabled";
+ fe1: display-frontend@1e20000 {
+ compatible = "allwinner,sun7i-a20-display-frontend";
+ reg = <0x01e20000 0x20000>;
+ interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_AHB_DE_FE1>, <&ccu CLK_DE_FE1>,
+ <&ccu CLK_DRAM_DE_FE1>;
+ clock-names = "ahb", "mod",
+ "ram";
+ resets = <&ccu RST_DE_FE1>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fe1_out: port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ fe1_out_be0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&be0_in_fe1>;
+ };
+
+ fe1_out_be1: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&be1_in_fe1>;
+ };
+ };
+ };
+ };
+
+ be1: display-backend@1e40000 {
+ compatible = "allwinner,sun7i-a20-display-backend";
+ reg = <0x01e40000 0x10000>;
+ interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_AHB_DE_BE1>, <&ccu CLK_DE_BE1>,
+ <&ccu CLK_DRAM_DE_BE1>;
+ clock-names = "ahb", "mod",
+ "ram";
+ resets = <&ccu RST_DE_BE1>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ be1_in: port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ be1_in_fe0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&fe0_out_be1>;
+ };
+
+ be1_in_fe1: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&fe1_out_be1>;
+ };
+ };
+
+ be1_out: port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ be1_out_tcon0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&tcon0_in_be1>;
+ };
+
+ be1_out_tcon1: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&tcon1_in_be1>;
+ };
+ };
+ };
+ };
+
+ be0: display-backend@1e60000 {
+ compatible = "allwinner,sun7i-a20-display-backend";
+ reg = <0x01e60000 0x10000>;
+ interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_DE_BE0>,
+ <&ccu CLK_DRAM_DE_BE0>;
+ clock-names = "ahb", "mod",
+ "ram";
+ resets = <&ccu RST_DE_BE0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ be0_in: port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ be0_in_fe0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&fe0_out_be0>;
+ };
+
+ be0_in_fe1: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&fe1_out_be0>;
+ };
+ };
+
+ be0_out: port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ be0_out_tcon0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&tcon0_in_be0>;
+ };
+
+ be0_out_tcon1: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&tcon1_in_be0>;
+ };
+ };
+ };
};
};
};