spl: Move all VPL, TPL and PowerPC specific CONFIG options to separate files
- Move all PowerPC (and some shared with Layerscape) options to
common/spl/Kconfig.nxp
- Move all other TPL related options to common/spl/Kconfig.tpl
- Move all VPL related options to common/spl/Kconfig.vpl
This makes the whole of common/spl/Kconfig slightly more readable.
Signed-off-by: Tom Rini <trini@konsulko.com>
diff --git a/common/spl/Kconfig.nxp b/common/spl/Kconfig.nxp
new file mode 100644
index 0000000..8da8553
--- /dev/null
+++ b/common/spl/Kconfig.nxp
@@ -0,0 +1,124 @@
+menu "PowerPC and LayerScape SPL Boot options"
+ depends on (PPC && SUPPORT_SPL && !SPL_FRAMEWORK) || \
+ ((ARCH_LS1021A || ARCH_LS1043A || ARCH_LS1046A) && SUPPORT_SPL)
+
+config SPL_NAND_BOOT
+ bool "Load SPL from NAND flash"
+ depends on PPC && (SUPPORT_SPL && !SPL_FRAMEWORK)
+
+config SPL_MMC_BOOT
+ bool "Load SPL from SD Card / eMMC"
+ depends on PPC && (SUPPORT_SPL && !SPL_FRAMEWORK)
+
+config SPL_SPI_BOOT
+ bool "Load SPL from SPI flash"
+ depends on PPC && (SUPPORT_SPL && !SPL_FRAMEWORK)
+
+config SPL_FSL_PBL
+ bool "Create SPL in Freescale PBI format"
+ depends on (PPC || ARCH_LS1021A || ARCH_LS1043A || ARCH_LS1046A) && \
+ SUPPORT_SPL
+ help
+ Create boot binary having SPL binary in PBI format concatenated with
+ u-boot binary.
+
+config SPL_SYS_CCSR_DO_NOT_RELOCATE
+ bool "Ensures that CCSR is not relocated"
+ depends on PPC
+ help
+ If this is defined, then CONFIG_SYS_CCSRBAR_PHYS will be forced to a
+ value that ensures that CCSR is not relocated.
+
+config TPL_SYS_CCSR_DO_NOT_RELOCATE
+ def_bool y
+ depends on SPL_SYS_CCSR_DO_NOT_RELOCATE
+
+menu "PowerPC SPL / TPL specific options"
+ depends on PPC && (SPL && !SPL_FRAMEWORK)
+
+config SPL_INIT_MINIMAL
+ bool "Arch init code will be built for a very small image"
+
+config SPL_FLUSH_IMAGE
+ bool "Clean dcache and invalidate icache after loading the image"
+
+config SPL_SKIP_RELOCATE
+ bool "Skip relocating SPL"
+
+config SPL_GD_ADDR
+ hex "Address to use for global data (gd) in SPL"
+ depends on !SPL_INIT_MINIMAL
+
+config SPL_RELOC_TEXT_BASE
+ hex "Address to relocate SPL to"
+ default SPL_TEXT_BASE
+ help
+ If unspecified, this is equal to CONFIG_SPL_TEXT_BASE (i.e. no
+ relocation is done).
+
+config SPL_RELOC_STACK
+ hex "Address of the start of the stack SPL will use after relocation."
+ help
+ If unspecified, this is equal to CONFIG_SYS_SPL_MALLOC_START. Starting
+ address of the malloc pool used in SPL. When this option is set the full
+ malloc is used in SPL and it is set up by spl_init() and before that, the
+ simple malloc() can be used if CONFIG_SYS_MALLOC_F is defined.
+
+config SPL_RELOC_MALLOC
+ bool "SPL has malloc pool after relocation"
+
+config SPL_RELOC_MALLOC_ADDR
+ hex "Address of malloc pool in SPL"
+ depends on SPL_RELOC_MALLOC
+
+config SPL_RELOC_MALLOC_SIZE
+ hex "Size of malloc pool in SPL"
+ depends on SPL_RELOC_MALLOC
+
+config TPL_GD_ADDR
+ hex "Address to use for global data (gd) in TPL"
+ depends on TPL
+
+config TPL_RELOC_TEXT_BASE
+ hex "Address to relocate TPL to"
+ depends on TPL
+ default TPL_TEXT_BASE
+ help
+ If unspecified, this is equal to CONFIG_TPL_TEXT_BASE (i.e. no
+ relocation is done).
+
+config TPL_RELOC_STACK
+ hex "Address of the start of the stack TPL will use after relocation."
+ depends on TPL
+ help
+ If unspecified, this is equal to CONFIG_SYS_TPL_MALLOC_START. Starting
+ address of the malloc pool used in TPL. When this option is set the full
+ malloc is used in TPL and it is set up by spl_init() and before that, the
+ simple malloc() can be used if CONFIG_SYS_MALLOC_F is defined.
+
+config TPL_RELOC_MALLOC
+ bool "TPL has malloc pool after relocation"
+ depends on TPL
+
+config TPL_RELOC_MALLOC_ADDR
+ hex "Address of malloc pool in TPL"
+ depends on TPL_RELOC_MALLOC
+
+config TPL_RELOC_MALLOC_SIZE
+ hex "Size of malloc pool in TPL"
+ depends on TPL_RELOC_MALLOC
+
+config TPL_PAD_TO
+ hex "Offset to which the TPL should be padded before appending the TPL payload"
+ depends on TPL && !TPL_FRAMEWORK
+ default TPL_MAX_SIZE
+ help
+ Image offset to which the TPL should be padded before appending the
+ TPL payload. By default, this is defined as CONFIG_TPL_MAX_SIZE, or 0 if
+ CONFIG_TPL_MAX_SIZE is undefined. CONFIG_TPL_PAD_TO must be either
+ 0, meaning to append the TPL payload without any padding, or >=
+ CONFIG_TPL_MAX_SIZE.
+endmenu
+
+endmenu
+