* Update Intel IXP4xx support
- Add IXP4xx NPE ethernet MAC support
- Add support for Intel IXDPG425 board
- Add support for Prodrive PDNB3 board
- Add IRQ support
Patch by Stefan Roese, 23 May 2006
[This patch does not include cpu/ixp/npe/IxNpeMicrocode.c which still
sufferes from licensing issues. Blame Intel.]
diff --git a/board/prodrive/pdnb3/pdnb3.c b/board/prodrive/pdnb3/pdnb3.c
new file mode 100644
index 0000000..e2fed5d
--- /dev/null
+++ b/board/prodrive/pdnb3/pdnb3.c
@@ -0,0 +1,249 @@
+/*
+ * (C) Copyright 2006
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <malloc.h>
+#include <asm/arch/ixp425.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* Prototypes */
+int gunzip(void *, int, unsigned char *, unsigned long *);
+int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+
+/* predefine these here for FPGA programming (before including fpga.c) */
+#define SET_FPGA(data) *IXP425_GPIO_GPOUTR = (data)
+#define FPGA_DONE_STATE (*IXP425_GPIO_GPINR & CFG_FPGA_DONE)
+#define FPGA_INIT_STATE (*IXP425_GPIO_GPINR & CFG_FPGA_INIT)
+#define OLD_VAL old_val
+
+static unsigned long old_val = 0;
+
+/*
+ * include common fpga code (for prodrive boards)
+ */
+#include "../common/fpga.c"
+
+/*
+ * Miscelaneous platform dependent initialisations
+ */
+int board_post_init(void)
+{
+ return (0);
+}
+
+int board_init(void)
+{
+ /* arch number of PDNB3 */
+ gd->bd->bi_arch_number = MACH_TYPE_PDNB3;
+
+ /* adress of boot parameters */
+ gd->bd->bi_boot_params = 0x00000100;
+
+ GPIO_OUTPUT_SET(CFG_GPIO_FPGA_RESET);
+ GPIO_OUTPUT_ENABLE(CFG_GPIO_FPGA_RESET);
+
+ GPIO_OUTPUT_SET(CFG_GPIO_SYS_RUNNING);
+ GPIO_OUTPUT_ENABLE(CFG_GPIO_SYS_RUNNING);
+
+ /*
+ * Setup GPIO's for FPGA programming
+ */
+ GPIO_OUTPUT_CLEAR(CFG_GPIO_PRG);
+ GPIO_OUTPUT_CLEAR(CFG_GPIO_CLK);
+ GPIO_OUTPUT_CLEAR(CFG_GPIO_DATA);
+ GPIO_OUTPUT_ENABLE(CFG_GPIO_PRG);
+ GPIO_OUTPUT_ENABLE(CFG_GPIO_CLK);
+ GPIO_OUTPUT_ENABLE(CFG_GPIO_DATA);
+ GPIO_OUTPUT_DISABLE(CFG_GPIO_INIT);
+ GPIO_OUTPUT_DISABLE(CFG_GPIO_DONE);
+
+ /*
+ * Setup GPIO's for interrupts
+ */
+ GPIO_OUTPUT_DISABLE(CFG_GPIO_PCI_INTA);
+ GPIO_INT_ACT_LOW_SET(CFG_GPIO_PCI_INTA);
+ GPIO_OUTPUT_DISABLE(CFG_GPIO_PCI_INTB);
+ GPIO_INT_ACT_LOW_SET(CFG_GPIO_PCI_INTB);
+ GPIO_OUTPUT_DISABLE(CFG_GPIO_RESTORE_INT);
+ GPIO_INT_ACT_LOW_SET(CFG_GPIO_RESTORE_INT);
+ GPIO_OUTPUT_DISABLE(CFG_GPIO_RESTART_INT);
+ GPIO_INT_ACT_LOW_SET(CFG_GPIO_RESTART_INT);
+
+ /*
+ * Setup GPIO's for 33MHz clock output
+ */
+ *IXP425_GPIO_GPCLKR = 0x01FF0000;
+ GPIO_OUTPUT_ENABLE(CFG_GPIO_CLK_33M);
+
+ /*
+ * Setup other chip select's
+ */
+ *IXP425_EXP_CS1 = CFG_EXP_CS1;
+
+ return 0;
+}
+
+/*
+ * Check Board Identity
+ */
+int checkboard(void)
+{
+ char *s = getenv("serial#");
+
+ puts("Board: PDNB3");
+
+ if (s != NULL) {
+ puts(", serial# ");
+ puts(s);
+ }
+ putc('\n');
+
+ return (0);
+}
+
+int dram_init(void)
+{
+ gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+ gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+
+ return (0);
+}
+
+int do_fpga_boot(unsigned char *fpgadata)
+{
+ unsigned char *dst;
+ int status;
+ int index;
+ int i;
+ ulong len = CFG_MALLOC_LEN;
+
+ /*
+ * Setup GPIO's for FPGA programming
+ */
+ GPIO_OUTPUT_CLEAR(CFG_GPIO_PRG);
+ GPIO_OUTPUT_CLEAR(CFG_GPIO_CLK);
+ GPIO_OUTPUT_CLEAR(CFG_GPIO_DATA);
+
+ /*
+ * Save value so no readback is required upon programming
+ */
+ old_val = *IXP425_GPIO_GPOUTR;
+
+ /*
+ * First try to decompress fpga image (gzip compressed?)
+ */
+ dst = malloc(CFG_FPGA_MAX_SIZE);
+ if (gunzip(dst, CFG_FPGA_MAX_SIZE, (uchar *)fpgadata, &len) != 0) {
+ printf("Error: Image has to be gzipp'ed!\n");
+ return -1;
+ }
+
+ status = fpga_boot(dst, len);
+ if (status != 0) {
+ printf("\nFPGA: Booting failed ");
+ switch (status) {
+ case ERROR_FPGA_PRG_INIT_LOW:
+ printf("(Timeout: INIT not low after asserting PROGRAM*)\n ");
+ break;
+ case ERROR_FPGA_PRG_INIT_HIGH:
+ printf("(Timeout: INIT not high after deasserting PROGRAM*)\n ");
+ break;
+ case ERROR_FPGA_PRG_DONE:
+ printf("(Timeout: DONE not high after programming FPGA)\n ");
+ break;
+ }
+
+ /* display infos on fpgaimage */
+ index = 15;
+ for (i=0; i<4; i++) {
+ len = dst[index];
+ printf("FPGA: %s\n", &(dst[index+1]));
+ index += len+3;
+ }
+ putc ('\n');
+ /* delayed reboot */
+ for (i=5; i>0; i--) {
+ printf("Rebooting in %2d seconds \r",i);
+ for (index=0;index<1000;index++)
+ udelay(1000);
+ }
+ putc('\n');
+ do_reset(NULL, 0, 0, NULL);
+ }
+
+ puts("FPGA: ");
+
+ /* display infos on fpgaimage */
+ index = 15;
+ for (i=0; i<4; i++) {
+ len = dst[index];
+ printf("%s ", &(dst[index+1]));
+ index += len+3;
+ }
+ putc('\n');
+
+ free(dst);
+
+ /*
+ * Reset FPGA
+ */
+ GPIO_OUTPUT_CLEAR(CFG_GPIO_FPGA_RESET);
+ udelay(10);
+ GPIO_OUTPUT_SET(CFG_GPIO_FPGA_RESET);
+
+ return (0);
+}
+
+int do_fpga(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ ulong addr;
+
+ if (argc < 2) {
+ printf ("Usage:\n%s\n", cmdtp->usage);
+ return 1;
+ }
+
+ addr = simple_strtoul(argv[1], NULL, 16);
+
+ return do_fpga_boot((unsigned char *)addr);
+}
+
+U_BOOT_CMD(
+ fpga, 2, 0, do_fpga,
+ "fpga - boot FPGA\n",
+ "address size\n - boot FPGA with gzipped image at <address>\n"
+);
+
+#if (CONFIG_COMMANDS & CFG_CMD_PCI) || defined(CONFIG_PCI)
+extern struct pci_controller hose;
+extern void pci_ixp_init(struct pci_controller * hose);
+
+void pci_init_board(void)
+{
+ extern void pci_ixp_init (struct pci_controller *hose);
+
+ pci_ixp_init(&hose);
+}
+#endif