* Update Intel IXP4xx support
- Add IXP4xx NPE ethernet MAC support
- Add support for Intel IXDPG425 board
- Add support for Prodrive PDNB3 board
- Add IRQ support
Patch by Stefan Roese, 23 May 2006
[This patch does not include cpu/ixp/npe/IxNpeMicrocode.c which still
sufferes from licensing issues. Blame Intel.]
diff --git a/cpu/ixp/npe/include/IxEthDB.h b/cpu/ixp/npe/include/IxEthDB.h
new file mode 100644
index 0000000..1189c9a
--- /dev/null
+++ b/cpu/ixp/npe/include/IxEthDB.h
@@ -0,0 +1,2373 @@
+/** @file IxEthDB.h
+ *
+ * @brief this file contains the public API of @ref IxEthDB component
+ *
+ *
+ * @par
+ * IXP400 SW Release version 2.0
+ *
+ * -- Copyright Notice --
+ *
+ * @par
+ * Copyright 2001-2005, Intel Corporation.
+ * All rights reserved.
+ *
+ * @par
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the Intel Corporation nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * @par
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS''
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * @par
+ * -- End of Copyright Notice --
+ *
+ */
+
+#ifndef IxEthDB_H
+#define IxEthDB_H
+
+#include <IxOsBuffMgt.h>
+#include <IxTypes.h>
+
+/**
+ * @defgroup IxEthDB IXP400 Ethernet Database (IxEthDB) API
+ *
+ * @brief ethDB is a library that does provides a MAC address database learning/filtering capability
+ *
+ *@{
+ */
+
+#define INLINE __inline__
+
+#define IX_ETH_DB_PRIVATE PRIVATE /* imported from IxTypes.h */
+
+#define IX_ETH_DB_PUBLIC PUBLIC
+
+/**
+ * @brief port ID => message handler NPE id conversion (0 => NPE_B, 1 => NPE_C)
+ */
+#define IX_ETH_DB_PORT_ID_TO_NPE(id) (id == 0 ? 1 : (id == 1 ? 2 : (id == 2 ? 0 : -1)))
+
+/**
+ * @def IX_ETH_DB_NPE_TO_PORT_ID(npe)
+ * @brief message handler NPE id => port ID conversion (NPE_B => 0, NPE_C => 1)
+ */
+#define IX_ETH_DB_NPE_TO_PORT_ID(npe) (npe == 0 ? 2 : (npe == 1 ? 0 : (npe == 2 ? 1 : -1)))
+
+/* temporary define - won't work for Azusa */
+#define IX_ETH_DB_PORT_ID_TO_NPE_LOGICAL_ID(id) (IX_ETH_DB_PORT_ID_TO_NPE(id) << 4)
+#define IX_ETH_DB_NPE_LOGICAL_ID_TO_PORT_ID(id) (IX_ETH_DB_NPE_TO_PORT_ID(id >> 4))
+
+/**
+ * @def IX_IEEE803_MAC_ADDRESS_SIZE
+ * @brief The size of the MAC address
+ */
+#define IX_IEEE803_MAC_ADDRESS_SIZE (6)
+
+/**
+ * @def IX_IEEE802_1Q_QOS_PRIORITY_COUNT
+ * @brief Number of QoS priorities defined by IEEE802.1Q
+ */
+#define IX_IEEE802_1Q_QOS_PRIORITY_COUNT (8)
+
+/**
+ * @enum IxEthDBStatus
+ * @brief Ethernet Database API return values
+ */
+typedef enum /* IxEthDBStatus */
+{
+ IX_ETH_DB_SUCCESS = IX_SUCCESS, /**< Success */
+ IX_ETH_DB_FAIL = IX_FAIL, /**< Failure */
+ IX_ETH_DB_INVALID_PORT, /**< Invalid port */
+ IX_ETH_DB_PORT_UNINITIALIZED, /**< Port not initialized */
+ IX_ETH_DB_MAC_UNINITIALIZED, /**< MAC not initialized */
+ IX_ETH_DB_INVALID_ARG, /**< Invalid argument */
+ IX_ETH_DB_NO_SUCH_ADDR, /**< Address not found for search or delete operations */
+ IX_ETH_DB_NOMEM, /**< Learning database memory full */
+ IX_ETH_DB_BUSY, /**< Learning database cannot complete operation, access temporarily blocked */
+ IX_ETH_DB_END, /**< Database browser passed the end of the record set */
+ IX_ETH_DB_INVALID_VLAN, /**< Invalid VLAN ID (valid range is 0..4094, 0 signifies no VLAN membership, used for priority tagged frames) */
+ IX_ETH_DB_INVALID_PRIORITY, /**< Invalid QoS priority/traffic class (valid range for QoS priority is 0..7, valid range for traffic class depends on run-time configuration) */
+ IX_ETH_DB_NO_PERMISSION, /**< No permission for attempted operation */
+ IX_ETH_DB_FEATURE_UNAVAILABLE, /**< Feature not available (or not enabled) */
+ IX_ETH_DB_INVALID_KEY, /**< Invalid search key */
+ IX_ETH_DB_INVALID_RECORD_TYPE /**< Invalid record type */
+} IxEthDBStatus;
+
+/** @brief VLAN ID type, valid range is 0..4094, 0 signifying no VLAN membership */
+typedef UINT32 IxEthDBVlanId;
+
+/** @brief 802.1Q VLAN tag, contains 3 bits user priority, 1 bit CFI, 12 bits VLAN ID */
+typedef UINT32 IxEthDBVlanTag;
+
+/** @brief QoS priority/traffic class type, valid range is 0..7, 0 being the lowest */
+typedef UINT32 IxEthDBPriority;
+
+/** @brief Priority mapping table; 0..7 QoS priorities used to index, table contains traffic classes */
+typedef UINT8 IxEthDBPriorityTable[8];
+
+/** @brief A 4096 bit array used to map the complete VLAN ID range */
+typedef UINT8 IxEthDBVlanSet[512];
+
+#define IX_ETH_DB_802_1Q_VLAN_MASK (0xFFF)
+#define IX_ETH_DB_802_1Q_QOS_MASK (0x7)
+
+#define IX_ETH_DB_802_1Q_MAX_VLAN_ID (0xFFE)
+
+/**
+ * @def IX_ETH_DB_SET_VLAN_ID
+ * @brief returns the given 802.1Q tag with the VLAN ID field substituted with the given VLAN ID
+ *
+ * This macro is used to change the VLAN ID in a 802.1Q tag.
+ *
+ * Example:
+ *
+ * tag = IX_ETH_DB_SET_VLAN_ID(tag, 32)
+ *
+ * inserts the VLAN ID "32" in the given tag.
+ */
+#define IX_ETH_DB_SET_VLAN_ID(vlanTag, vlanID) (((vlanTag) & 0xF000) | ((vlanID) & IX_ETH_DB_802_1Q_VLAN_MASK))
+
+/**
+* @def IX_ETH_DB_GET_VLAN_ID
+* @brief returns the VLAN ID from the given 802.1Q tag
+*/
+#define IX_ETH_DB_GET_VLAN_ID(vlanTag) ((vlanTag) & IX_ETH_DB_802_1Q_VLAN_MASK)
+
+#define IX_ETH_DB_GET_QOS_PRIORITY(vlanTag) (((vlanTag) >> 13) & IX_ETH_DB_802_1Q_QOS_MASK)
+
+#define IX_ETH_DB_SET_QOS_PRIORITY(vlanTag, priority) (((vlanTag) & 0x1FFF) | (((priority) & IX_ETH_DB_802_1Q_QOS_MASK) << 13))
+
+#define IX_ETH_DB_CHECK_VLAN_TAG(vlanTag) { if(((vlanTag & 0xFFFF0000) != 0) || (IX_ETH_DB_GET_VLAN_ID(vlanTag) > 4094)) return IX_ETH_DB_INVALID_VLAN; }
+
+#define IX_ETH_DB_CHECK_VLAN_ID(vlanId) { if (vlanId > IX_ETH_DB_802_1Q_MAX_VLAN_ID) return IX_ETH_DB_INVALID_VLAN; }
+
+#define IX_IEEE802_1Q_VLAN_TPID (0x8100)
+
+typedef enum
+{
+ IX_ETH_DB_UNTAGGED_FRAMES = 0x1, /**< Accepts untagged frames */
+ IX_ETH_DB_VLAN_TAGGED_FRAMES = 0x2, /**< Accepts tagged frames */
+ IX_ETH_DB_PRIORITY_TAGGED_FRAMES = 0x4, /**< Accepts tagged frames with VLAN ID set to 0 (no VLAN membership) */
+ IX_ETH_DB_ACCEPT_ALL_FRAMES =
+ IX_ETH_DB_UNTAGGED_FRAMES | IX_ETH_DB_VLAN_TAGGED_FRAMES /**< Accepts all the frames */
+} IxEthDBFrameFilter;
+
+typedef enum
+{
+ IX_ETH_DB_PASS_THROUGH = 0x1, /**< Leave frame as-is */
+ IX_ETH_DB_ADD_TAG = 0x2, /**< Add default port VLAN tag */
+ IX_ETH_DB_REMOVE_TAG = 0x3 /**< Remove VLAN tag from frame */
+} IxEthDBTaggingAction;
+
+typedef enum
+{
+ IX_ETH_DB_FIREWALL_WHITE_LIST = 0x1, /**< Firewall operates in white-list mode (MAC address based admission) */
+ IX_ETH_DB_FIREWALL_BLACK_LIST = 0x2 /**< Firewall operates in black-list mode (MAC address based blocking) */
+} IxEthDBFirewallMode;
+
+typedef enum
+{
+ IX_ETH_DB_FILTERING_RECORD = 0x01, /**< <table><caption> Filtering record </caption>
+ * <tr><td> MAC address <td> static/dynamic type <td> age
+ * </table>
+ */
+ IX_ETH_DB_FILTERING_VLAN_RECORD = 0x02, /**< <table><caption> VLAN-enabled filtering record </caption>
+ * <tr><td> MAC address <td> static/dynamic type <td> age <td> 802.1Q tag
+ * </table>
+ */
+ IX_ETH_DB_WIFI_RECORD = 0x04, /**< <table><caption> WiFi header conversion record </caption>
+ * <tr><td> MAC address <td> optional gateway MAC address <td>
+ * </table>
+ */
+ IX_ETH_DB_FIREWALL_RECORD = 0x08, /**< <table><caption> Firewall record </caption>
+ * <tr><td> MAC address
+ * </table>
+ */
+ IX_ETH_DB_GATEWAY_RECORD = 0x10, /**< <i>For internal use only</i> */
+ IX_ETH_DB_MAX_RECORD_TYPE_INDEX = 0x10, /**< <i>For internal use only</i> */
+ IX_ETH_DB_NO_RECORD_TYPE = 0, /**< None of the registered record types */
+ IX_ETH_DB_ALL_FILTERING_RECORDS = IX_ETH_DB_FILTERING_RECORD | IX_ETH_DB_FILTERING_VLAN_RECORD, /**< All the filtering records */
+ IX_ETH_DB_ALL_RECORD_TYPES = IX_ETH_DB_FILTERING_RECORD | IX_ETH_DB_FILTERING_VLAN_RECORD |
+ IX_ETH_DB_WIFI_RECORD | IX_ETH_DB_FIREWALL_RECORD /**< All the record types registered within EthDB */
+} IxEthDBRecordType;
+
+typedef enum
+{
+ IX_ETH_DB_LEARNING = 0x01, /**< Learning feature; enables EthDB to learn MAC address (filtering) records, including 802.1Q enabled records */
+ IX_ETH_DB_FILTERING = 0x02, /**< Filtering feature; enables EthDB to communicate with the NPEs for downloading filtering information in the NPEs; depends on the learning feature */
+ IX_ETH_DB_VLAN_QOS = 0x04, /**< VLAN/QoS feature; enables EthDB to configure NPEs to operate in VLAN/QoS aware modes */
+ IX_ETH_DB_FIREWALL = 0x08, /**< Firewall feature; enables EthDB to configure NPEs to operate in firewall mode, using white/black address lists */
+ IX_ETH_DB_SPANNING_TREE_PROTOCOL = 0x10, /**< Spanning tree protocol feature; enables EthDB to configure the NPEs as STP nodes */
+ IX_ETH_DB_WIFI_HEADER_CONVERSION = 0x20 /**< WiFi 802.3 to 802.11 header conversion feature; enables EthDB to handle WiFi conversion data */
+} IxEthDBFeature;
+
+typedef UINT32 IxEthDBProperty; /**< Property ID type */
+
+typedef enum
+{
+ IX_ETH_DB_INTEGER_PROPERTY = 0x1, /**< 4 byte unsigned integer type */
+ IX_ETH_DB_STRING_PROPERTY = 0x2, /**< NULL-terminated string type of maximum 255 characters (including the terminator) */
+ IX_ETH_DB_MAC_ADDR_PROPERTY = 0x3, /**< 6 byte MAC address type */
+ IX_ETH_DB_BOOL_PROPERTY = 0x4 /**< 4 byte boolean type; can contain only TRUE and FALSE values */
+} IxEthDBPropertyType;
+
+/* list of supported properties for the IX_ETH_DB_VLAN_QOS feature */
+#define IX_ETH_DB_QOS_TRAFFIC_CLASS_COUNT_PROPERTY (0x01) /**< Property identifying number the supported number of traffic classes */
+#define IX_ETH_DB_QOS_TRAFFIC_CLASS_0_RX_QUEUE_PROPERTY (0x10) /**< Rx queue assigned to traffic class 0 */
+#define IX_ETH_DB_QOS_TRAFFIC_CLASS_1_RX_QUEUE_PROPERTY (0x11) /**< Rx queue assigned to traffic class 1 */
+#define IX_ETH_DB_QOS_TRAFFIC_CLASS_2_RX_QUEUE_PROPERTY (0x12) /**< Rx queue assigned to traffic class 2 */
+#define IX_ETH_DB_QOS_TRAFFIC_CLASS_3_RX_QUEUE_PROPERTY (0x13) /**< Rx queue assigned to traffic class 3 */
+#define IX_ETH_DB_QOS_TRAFFIC_CLASS_4_RX_QUEUE_PROPERTY (0x14) /**< Rx queue assigned to traffic class 4 */
+#define IX_ETH_DB_QOS_TRAFFIC_CLASS_5_RX_QUEUE_PROPERTY (0x15) /**< Rx queue assigned to traffic class 5 */
+#define IX_ETH_DB_QOS_TRAFFIC_CLASS_6_RX_QUEUE_PROPERTY (0x16) /**< Rx queue assigned to traffic class 6 */
+#define IX_ETH_DB_QOS_TRAFFIC_CLASS_7_RX_QUEUE_PROPERTY (0x17) /**< Rx queue assigned to traffic class 7 */
+
+/* private property used by EthAcc to indicate queue configuration complete */
+#define IX_ETH_DB_QOS_QUEUE_CONFIGURATION_COMPLETE (0x18)
+
+/**
+ *
+ * @brief The IEEE 802.3 Ethernet MAC address structure.
+ *
+ * The data should be packed with bytes xx:xx:xx:xx:xx:xx
+ *
+ * @note The data must be packed in network byte order.
+ */
+typedef struct
+{
+ UINT8 macAddress[IX_IEEE803_MAC_ADDRESS_SIZE];
+} IxEthDBMacAddr;
+
+/**
+ * @ingroup IxEthDB
+ *
+ * @brief Definition of an IXP400 port.
+ */
+typedef UINT32 IxEthDBPortId;
+
+/**
+ * @ingroup IxEthDB
+ *
+ * @brief Port dependency map definition
+ */
+typedef UINT8 IxEthDBPortMap[32];
+
+/**
+ * @ingroup IxEthDB
+ *
+ * @fn IxEthDBStatus ixEthDBInit(void)
+ *
+ * @brief Initializes the Ethernet learning/filtering database
+ *
+ * @note calling this function multiple times does not constitute an error;
+ * redundant calls will be ignored, returning IX_ETH_DB_SUCCESS
+ *
+ * @retval IX_ETH_DB_SUCCESS initialization was successful
+ * @retval IX_ETH_DB_FAIL initialization failed (OS error)
+ */
+IX_ETH_DB_PUBLIC
+IxEthDBStatus ixEthDBInit(void);
+
+/**
+ * @ingroup IxEthDB
+ *
+ * @fn IxEthDBStatus ixEthDBUnload(void)
+ *
+ * @brief Stops and prepares the EthDB component for unloading.
+ *
+ * @retval IX_ETH_DB_SUCCESS de-initialization was successful
+ * @retval IX_ETH_DB_BUSY de-initialization failed, ports must be disabled first
+ * @retval IX_ETH_DB_FAIL de-initialization failed (OS error)
+ */
+IX_ETH_DB_PUBLIC
+IxEthDBStatus ixEthDBUnload(void);
+
+/**
+ * @ingroup IxEthDB
+ *
+ * @fn void ixEthDBPortInit(IxEthDBPortId portID)
+ *
+ * @brief Initializes a port
+ *
+ * This function is called automatically by the Ethernet Access
+ * ixEthAccPortInit() routine for Ethernet NPE ports and should be manually
+ * called for any user-defined port (any port that is not one of
+ * the two Ethernet NPEs).
+ *
+ * @param portID @ref IxEthDBPortId [in] - ID of the port to be initialized
+ *
+ * @see IxEthDBPortDefs.h for port definitions
+ *
+ * @note calling this function multiple times does not constitute an error;
+ * redundant calls will be ignored
+ */
+IX_ETH_DB_PUBLIC
+void ixEthDBPortInit(IxEthDBPortId portID);
+
+/**
+ * @ingroup IxEthDB
+ *
+ * @fn IxEthDBStatus ixEthDBPortEnable(IxEthDBPortId portID)
+ *
+ * @brief Enables a port
+ *
+ * This function is called automatically from the Ethernet Access component
+ * ixEthAccPortEnable() routine for Ethernet NPE ports and should be manually
+ * called for any user-defined port (any port that is not one of
+ * the Ethernet NPEs).
+ *
+ * @param portID @ref IxEthDBPortId [in] - ID of the port to enable processing on
+ *
+ * @retval IX_ETH_DB_SUCCESS if enabling is successful
+ * @retval IX_ETH_DB_FAIL if the enabling was not successful due to
+ * a message handler error
+ * @retval IX_ETH_DB_MAC_UNINITIALIZED the MAC address of this port was
+ * not initialized (only for Ethernet NPEs)
+ * @retval IX_ETH_DB_INVALID_PORT if portID is invalid
+ *
+ * @pre ixEthDBPortAddressSet needs to be called prior to enabling the port events
+ * for Ethernet NPEs
+ *
+ * @see ixEthDBPortAddressSet
+ *
+ * @see IxEthDBPortDefs.h for port definitions
+ *
+ * @note calling this function multiple times does not constitute an error;
+ * redundant calls will be ignored
+ */
+IX_ETH_DB_PUBLIC
+IxEthDBStatus ixEthDBPortEnable(IxEthDBPortId portID);
+
+/**
+ * @ingroup IxEthDB
+ *
+ * @fn IxEthDBStatus ixEthDBPortDisable(IxEthDBPortId portID)
+ *
+ * @brief Disables processing on a port
+ *
+ * This function is called automatically from the Ethernet Access component
+ * ixEthAccPortDisable() routine for Ethernet NPE ports and should be manually
+ * called for any user-defined port (any port that is not one of
+ * the Ethernet NPEs).
+ *
+ * @note Calling ixEthAccPortDisable() will disable the respective Ethernet NPE.
+ * After Ethernet NPEs are disabled they are stopped therefore
+ * when re-enabled they need to be reset, downloaded with microcode and started.
+ * For learning to restart working the user needs to call again
+ * ixEthAccPortUnicastMacAddressSet or ixEthDBUnicastAddressSet
+ * with the respective port MAC address.
+ * Residual MAC addresses learnt before the port was disabled are deleted as soon
+ * as the port is disabled. This only applies to dynamic (learnt) entries, static
+ * entries do not dissapear when the port is disabled.
+ *
+ * @param portID @ref IxEthDBPortId [in] - ID of the port to disable processing on
+ *
+ * @retval IX_ETH_DB_SUCCESS if disabling is successful
+ * @retval IX_ETH_DB_FAIL if the disabling was not successful due to
+ * a message handler error
+ * @retval IX_ETH_DB_INVALID_PORT if portID is invalid
+ *
+ * @note calling this function multiple times after the first time completed successfully
+ * does not constitute an error; redundant calls will be ignored and return IX_ETH_DB_SUCCESS
+*/
+IX_ETH_DB_PUBLIC
+IxEthDBStatus ixEthDBPortDisable(IxEthDBPortId portID);
+
+/**
+ * @ingroup IxEthDB
+ *
+ * @fn IxEthDBStatus ixEthDBPortAddressSet(IxEthDBPortId portID, IxEthDBMacAddr *macAddr)
+ *
+ * @brief Sets the port MAC address
+ *
+ * This function is to be called from the Ethernet Access component top-level
+ * ixEthDBUnicastAddressSet(). Event processing cannot be enabled for a port
+ * until its MAC address has been set.
+ *
+ * @param portID @ref IxEthDBPortId [in] - ID of the port whose MAC address is set
+ * @param macAddr @ref IxEthDBMacAddr [in] - port MAC address
+ *
+ * @retval IX_ETH_DB_SUCCESS MAC address was set successfully
+ * @retval IX_ETH_DB_FAIL MAC address was not set due to a message handler failure
+ * @retval IX_ETH_DB_INVALID_PORT if the port is not an Ethernet NPE
+ *
+ * @see IxEthDBPortDefs.h for port definitions
+ */
+IX_ETH_DB_PUBLIC
+IxEthDBStatus ixEthDBPortAddressSet(IxEthDBPortId portID, IxEthDBMacAddr *macAddr);
+
+/**
+ * @ingroup IxEthDB
+ *
+ * @fn IxEthDBStatus ixEthDBFilteringPortMaximumFrameSizeSet(IxEthDBPortId portID, UINT32 maximumFrameSize)
+ *
+ * @brief Set the maximum frame size supported on the given port ID
+ *
+ * This functions set the maximum frame size supported on a specific port ID
+ *
+ * - Reentrant - yes
+ * - ISR Callable - no
+ *
+ * @param portID @ref IxEthDBPortId [in] - port ID to configure
+ * @param maximumFrameSize UINT32 [in] - maximum frame size to configure
+ *
+ * @retval IX_ETH_DB_SUCCESS the port is configured
+ * @retval IX_ETH_DB_PORT_UNINITIALIZED the port has not been initialized
+ * @retval IX_ETH_DB_INVALID_PORT portID is invalid
+ * @retval IX_ETH_DB_INVALID_ARG size parameter is out of range
+ * @retval IX_ETH_DB_NO_PERMISSION selected port is not an Ethernet NPE
+ * @retval IX_FAIL unknown OS or NPE communication error
+ *
+ * @note
+ * This maximum frame size is used to filter the frames based on their
+ * destination addresses and the capabilities of the destination port.
+ * The mximum value that can be set for a NPE port is 16320.
+ * (IX_ETHNPE_ACC_FRAME_LENGTH_MAX)
+ */
+IX_ETH_DB_PUBLIC
+IxEthDBStatus ixEthDBFilteringPortMaximumFrameSizeSet(IxEthDBPortId portID, UINT32 maximumFrameSize);
+
+/**
+ * @ingroup IxEthDB
+ *
+ * @fn IxEthDBStatus ixEthDBFilteringStaticEntryProvision(IxEthDBPortId portID, IxEthDBMacAddr *macAddr)
+ *
+ * @brief Populate the Ethernet learning/filtering database with a static MAC address
+ *
+ * Populates the Ethernet learning/filtering database with a static MAC address. The entry will not be subject to aging.
+ * If there is an entry (static or dynamic) with the corresponding MAC address on any port this entry will take precedence.
+ * Any other entry with the same MAC address will be removed.
+ *
+ * - Reentrant - yes
+ * - ISR Callable - yes
+ *
+ * @param portID @ref IxEthDBPortId [in] - port ID to add the static address to
+ * @param macAddr @ref IxEthDBMacAddr [in] - static MAC address to add
+ *
+ * @retval IX_ETH_DB_SUCCESS the add was successful
+ * @retval IX_ETH_DB_FAIL failed to populate the database entry
+ * @retval IX_ETH_DB_BUSY failed due to a temporary busy condition (i.e. lack of CPU cycles), try again later
+ * @retval IX_ETH_DB_INVALID_PORT portID is invalid
+ * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized
+ * @retval IX_ETH_DB_INVALID_ARG invalid <i>macAddr</i> pointer argument
+ * @retval IX_ETH_DB_FEATURE_UNAVAILABLE learning feature is disabled
+ */
+IX_ETH_DB_PUBLIC
+IxEthDBStatus ixEthDBFilteringStaticEntryProvision(IxEthDBPortId portID, IxEthDBMacAddr *macAddr);
+
+/**
+ * @ingroup IxEthDB
+ *
+ * @fn IxEthDBStatus ixEthDBFilteringDynamicEntryProvision(IxEthDBPortId portID, IxEthDBMacAddr *macAddr)
+ *
+ * @brief Populate the Ethernet learning/filtering database with a dynamic MAC address
+ *
+ * Populates the Ethernet learning/filtering database with a dynamic MAC address. This entry will be subject to normal
+ * aging function, if aging is enabled on its port.
+ * If there is an entry (static or dynamic) with the same MAC address on any port this entry will take precedence.
+ * Any other entry with the same MAC address will be removed.
+ *
+ * - Reentrant - yes
+ * - ISR Callable - yes
+ *
+ * @param portID @ref IxEthDBPortId [in] - port ID to add the dynamic address to
+ * @param macAddr @ref IxEthDBMacAddr [in] - static MAC address to add
+ *
+ * @retval IX_ETH_DB_SUCCESS the add was successful
+ * @retval IX_ETH_DB_FAIL failed to populate the database entry
+ * @retval IX_ETH_DB_BUSY failed due to a temporary busy condition (i.e. lack of CPU cycles), try again later
+ * @retval IX_ETH_DB_INVALID_PORT portID is invalid
+ * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized
+ * @retval IX_ETH_DB_INVALID_ARG invalid <i>macAddr</i> pointer argument
+ * @retval IX_ETH_DB_FEATURE_UNAVAILABLE learning feature is disabled
+ */
+IX_ETH_DB_PUBLIC
+IxEthDBStatus ixEthDBFilteringDynamicEntryProvision(IxEthDBPortId portID, IxEthDBMacAddr *macAddr);
+
+/**
+ * @ingroup IxEthDB
+ *
+ * @fn IxEthDBStatus ixEthDBFilteringEntryDelete(IxEthDBMacAddr *macAddr)
+ *
+ * @brief Removes a MAC address entry from the Ethernet learning/filtering database
+ *
+ * @param macAddr IxEthDBMacAddr [in] - MAC address to remove
+ *
+ * - Reentrant - yes
+ * - ISR Callable - no
+ *
+ * @retval IX_ETH_DB_SUCCESS the removal was successful
+ * @retval IX_ETH_DB_NO_SUCH_ADDR failed to remove the address (not in the database)
+ * @retval IX_ETH_DB_INVALID_ARG invalid <i>macAddr</i> pointer argument
+ * @retval IX_ETH_DB_BUSY failed due to a temporary busy condition (i.e. lack of CPU cycles), try again later
+ */
+IX_ETH_DB_PUBLIC
+IxEthDBStatus ixEthDBFilteringEntryDelete(IxEthDBMacAddr *macAddr);
+
+/**
+ * @ingroup IxEthDB
+ *
+ * @fn IxEthDBStatus ixEthDBFilteringPortSearch(IxEthDBPortId portID, IxEthDBMacAddr *macAddr)
+ *
+ * @brief Search the Ethernet learning/filtering database for the given MAC address and port ID
+ *
+ * This functions searches the database for a specific port ID and MAC address. Both the port ID
+ * and the MAC address have to match in order for the record to be reported as found.
+ *
+ * - Reentrant - yes
+ * - ISR Callable - no
+ *
+ * @param portID @ref IxEthDBPortId [in] - port ID to search for
+ * @param macAddr @ref IxEthDBMacAddr [in] - MAC address to search for
+ *
+ * @retval IX_ETH_DB_SUCCESS the record exists in the database
+ * @retval IX_ETH_DB_INVALID_ARG invalid macAddr pointer argument
+ * @retval IX_ETH_DB_NO_SUCH_ADDR the record was not found in the database
+ * @retval IX_ETH_DB_INVALID_PORT portID is invalid
+ * @retval IX_ETH_DB_PORT_UNINITIALIZED port ID is not initialized
+ * @retval IX_ETH_DB_FEATURE_UNAVAILABLE learning feature is disabled
+ */
+IX_ETH_DB_PUBLIC
+IxEthDBStatus ixEthDBFilteringPortSearch(IxEthDBPortId portID, IxEthDBMacAddr *macAddr);
+
+/**
+ * @ingroup IxEthDB
+ *
+ * @fn IxEthDBStatus ixEthDBFilteringDatabaseSearch(IxEthDBPortId *portID, IxEthDBMacAddr *macAddr)
+ *
+ * @brief Search the Ethernet learning/filtering database for a MAC address and return the port ID
+ *
+ * Searches the database for a MAC address. The function returns the portID for the
+ * MAC address record, if found. If no match is found the function returns IX_ETH_DB_NO_SUCH_ADDR.
+ * The portID is only valid if the function finds a match.
+ *
+ * - Reentrant - yes
+ * - ISR Callable - no
+ *
+ * @param portID @ref IxEthDBPortId [in] - port ID the address belongs to (populated only on a successful search)
+ * @param macAddr @ref IxEthDBMacAddr [in] - MAC address to search for
+ *
+ * @retval IX_ETH_DB_SUCCESS the record exists in the database
+ * @retval IX_ETH_DB_NO_SUCH_ADDR the record was not found in the database
+ * @retval IX_ETH_DB_INVALID_ARG invalid macAddr or portID pointer argument(s)
+ */
+IX_ETH_DB_PUBLIC
+IxEthDBStatus ixEthDBFilteringDatabaseSearch(IxEthDBPortId *portID, IxEthDBMacAddr *macAddr);
+
+/**
+ * @ingroup IxEthDB
+ *
+ * @fn IxEthDBStatus ixEthDBFilteringPortUpdatingSearch(IxEthDBPortId *portID, IxEthDBMacAddr *macAddr)
+ *
+ * @brief Search the filtering database for a MAC address, return the port ID and reset the record age
+ *
+ * Searches the database for a MAC address. The function returns the portID for the
+ * MAC address record and resets the entry age to 0, if found.
+ * If no match is found the function returns IX_ETH_DB_NO_SUCH_ADDR.
+ * The portID is only valid if the function finds a match.
+ *
+ * - Reentrant - yes
+ * - ISR Callable - no
+ *
+ * @retval IX_ETH_DB_SUCCESS the MAC address was found
+ * @retval IX_ETH_DB_NO_SUCH_ADDR the MAC address was not found
+ * @retval IX_ETH_DB_INVALID_ARG invalid macAddr or portID pointer argument(s)
+ */
+IX_ETH_DB_PUBLIC
+IxEthDBStatus ixEthDBFilteringPortUpdatingSearch(IxEthDBPortId *portID, IxEthDBMacAddr *macAddr);
+
+/**
+ * @ingroup IxEthDB
+ *
+ * @def IX_ETH_DB_MAINTENANCE_TIME
+ *
+ * @brief The @ref ixEthDBDatabaseMaintenance must be called by the user at a frequency of
+ * IX_ETH_DB_MAINTENANCE_TIME
+ *
+ */
+#define IX_ETH_DB_MAINTENANCE_TIME (1 * 60) /* 1 Minute */
+
+/**
+ * @ingroup IxEthDB
+ *
+ * @def IX_ETH_DB_LEARNING_ENTRY_AGE_TIME
+ *
+ * @brief The define specifies the filtering database age entry time. Static entries older than
+ * IX_ETH_DB_LEARNING_ENTRY_AGE_TIME +/- IX_ETH_DB_MAINTENANCE_TIME shall be removed.
+ *
+ */
+#define IX_ETH_DB_LEARNING_ENTRY_AGE_TIME (15 * 60 ) /* 15 Mins */
+
+/**
+ * @ingroup IxEthDB
+ *
+ * @fn IxEthDBStatus ixEthDBPortAgingDisable(IxEthDBPortId portID)
+ *
+ * @brief Disable the aging function for a specific port
+ *
+ * @param portID @ref IxEthDBPortId [in] - port ID to disable aging on
+ *
+ * - Reentrant - yes
+ * - ISR Callable - no
+ *
+ * @retval IX_ETH_DB_SUCCESS aging disabled successfully
+ * @retval IX_ETH_DB_INVALID_PORT portID is invalid
+ * @retval IX_ETH_DB_PORT_UNINITIALIZED port ID is not initialized
+ * @retval IX_ETH_DB_FEATURE_UNAVAILABLE learning feature is disabled
+ */
+IX_ETH_DB_PUBLIC
+IxEthDBStatus ixEthDBPortAgingDisable(IxEthDBPortId portID);
+
+/**
+ * @ingroup IxEthDB
+ *
+ * @fn IxEthDBStatus ixEthDBPortAgingEnable(IxEthDBPortId portID)
+ *
+ * @brief Enable the aging function for a specific port
+ *
+ * Enables the aging of dynamic MAC address entries stored in the learning/filtering database
+ *
+ * @note The aging function relies on the @ref ixEthDBDatabaseMaintenance being called with a period of
+ * @ref IX_ETH_DB_MAINTENANCE_TIME seconds.
+ *
+ * - Reentrant - yes
+ * - ISR Callable - no
+ *
+ * @param portID @ref IxEthDBPortId [in] - port ID to enable aging on
+ *
+ * @retval IX_ETH_DB_SUCCESS aging enabled successfully
+ * @retval IX_ETH_DB_INVALID_PORT portID is invalid
+ * @retval IX_ETH_DB_PORT_UNINITIALIZED port ID is not initialized
+ * @retval IX_ETH_DB_FEATURE_UNAVAILABLE learning feature is disabled
+ */
+IX_ETH_DB_PUBLIC
+IxEthDBStatus ixEthDBPortAgingEnable(IxEthDBPortId portID);
+
+/**
+ * @ingroup IxEthDB
+ *
+ * @fn void ixEthDBDatabaseMaintenance(void)
+ *
+ * @brief Performs a maintenance operation on the Ethernet learning/filtering database
+ *
+ * In order to perform a database maintenance this function must be called every
+ * @ref IX_ETH_DB_MAINTENANCE_TIME seconds. It should be called regardless of whether learning is
+ * enabled or not.
+ *
+ * - Reentrant - no
+ * - ISR Callable - no
+ *
+ * @note this function call will be ignored if the learning feature is disabled
+ */
+IX_ETH_DB_PUBLIC
+void ixEthDBDatabaseMaintenance(void);
+
+/**
+ * @ingroup IxEthDB
+ *
+ * @fn IxEthDBStatus ixEthDBFilteringDatabaseShow(IxEthDBPortId portID)
+ *
+ * @brief This function displays the Mac Ethernet MAC address filtering tables.
+ *
+ * It displays the MAC address, port ID, entry type (dynamic/static),and age for
+ * the given port ID.
+ *
+ * - Reentrant - no
+ * - ISR Callable - no
+ *
+ * @param portID @ref IxEthDBPortId [in] - port ID to display the MAC address entries
+ *
+ * @retval IX_ETH_DB_SUCCESS operation completed successfully
+ * @retval IX_ETH_DB_INVALID_PORT portID is invalid
+ * @retval IX_ETH_DB_PORT_UNINITIALIZED port ID is not initialized
+ * @retval IX_ETH_DB_FAIL record browser failed due to an internal busy or lock condition
+ *
+ * @note this function is deprecated and kept for compatibility reasons; use @ref ixEthDBFilteringDatabaseShowRecords instead
+ *
+ * @see ixEthDBFilteringDatabaseShowRecords
+ */
+IX_ETH_DB_PUBLIC
+IxEthDBStatus ixEthDBFilteringDatabaseShow(IxEthDBPortId portID);
+
+/**
+ * @ingroup IxEthDB
+ *
+ * @fn void ixEthDBFilteringDatabaseShowAll(void)
+ *
+ * @brief Displays the MAC address recorded in the filtering database for all registered
+ * ports (see IxEthDBPortDefs.h), grouped by port ID.
+ *
+ * - Reentrant - no
+ * - ISR Callable - no
+ *
+ * @retval void
+ *
+ * @note this function is deprecated and kept for compatibility reasons; use @ref ixEthDBFilteringDatabaseShowRecords instead
+ *
+ * @see ixEthDBFilteringDatabaseShowRecords
+ */
+IX_ETH_DB_PUBLIC
+void ixEthDBFilteringDatabaseShowAll(void);
+
+/**
+ * @ingroup IxEthDB
+ *
+ * @fn IxEthDBStatus ixEthDBFilteringDatabaseShowRecords(IxEthDBPortId portID, IxEthDBRecordType recordFilter)
+ *
+ * @brief This function displays per port database records, given a record type filter
+ *
+ * The supported record type filters are:
+ *
+ * - IX_ETH_DB_FILTERING_RECORD - displays the non-VLAN filtering records (MAC address, age, static/dynamic)
+ * - IX_ETH_DB_FILTERING_VLAN_RECORD - displays the VLAN filtering records (MAC address, age, static/dynamic, VLAN ID, CFI, QoS class)
+ * - IX_ETH_DB_FILTERING_RECORD | IX_ETH_DB_FILTERING_VLAN_RECORD - displays the previous two types of records
+ * - IX_ETH_DB_WIFI_RECORD - displays the WiFi header conversion records (MAC address, optional gateway MAC address) and WiFi header conversion parameters (BBSID, Duration/ID)
+ * - IX_ETH_DB_FIREWALL_RECORD - displays the firewall MAC address table and firewall operating mode (white list/black list)
+ * - IX_ETH_DB_ALL_RECORD_TYPES - displays all the record types
+ * - IX_ETH_DB_NO_RECORD_TYPE - displays only the port status (no records are displayed)
+ *
+ * Additionally, the status of each port will be displayed, containg the following information: type, capabilities, enabled status,
+ * aging enabled status, group membership and maximum frame size.
+ *
+ * The port ID can either be an actual port or IX_ETH_DB_ALL_PORTS, in which case the requested information
+ * will be displayed for all the ports (grouped by port)
+ *
+ * - Reentrant - no
+ * - ISR Callable - no
+ *
+ * @param portID ID of the port to display information on (use IX_ETH_DB_ALL_PORTS for all the ports)
+ * @param recordFilter record type filter
+ *
+ * @retval IX_ETH_DB_SUCCESS operation completed successfully
+ * @retval IX_ETH_DB_INVALID_PORT portID is invalid
+ * @retval IX_ETH_DB_PORT_UNINITIALIZED port ID is not initialized
+ */
+IX_ETH_DB_PUBLIC
+IxEthDBStatus ixEthDBFilteringDatabaseShowRecords(IxEthDBPortId portID, IxEthDBRecordType recordFilter);
+
+/**
+ * @ingroup IxEthDB
+ *
+ * @fn IxEthDBStatus ixEthDBPortDependencyMapSet(IxEthDBPortId portID, IxEthDBPortMap dependencyPortMap)
+ *
+ * @brief Sets the dependency port map for a port
+ *
+ * @param portID ID of the port to set the dependency map to
+ * @param dependencyPortMap new dependency map (as bitmap, each bit set indicates a port being included)
+ *
+ * This function is used to share filtering information between ports.
+ * By adding a port into another port's dependency map the target port
+ * filtering data will import the filtering data from the port it depends on.
+ * Any changes to filtering data for a port - such as adding, updating or removing records -
+ * will trigger updates in the filtering information for all the ports depending on
+ * on the updated port.
+ *
+ * For example, if ports 2 and 3 are set in the port 0 dependency map the filtering
+ * information for port 0 will also include the filtering information from ports 2 and 3.
+ * Adding a record to port 2 will also trigger an update not only on port 2 but also on
+ * port 0.
+ *
+ * The dependency map is a 256 bit array where each bit corresponds to a port corresponding to the
+ * bit offset (bit 0 - port 0, bit 1 - port 1 etc). Setting a bit to 1 indicates that the corresponding
+ * port is the port map. For example, a dependency port map of 0x14 consists in the ports with IDs 2 and 4.
+ * Note that the last bit (offset 255) is reserved and should never be set (it will be automatically
+ * cleared by the function).
+ *
+ * By default, each port has a dependency port map consisting only of itself, i.e.
+ *
+ * @verbatim
+ IxEthDBPortMap portMap;
+
+ // clear all ports from port map
+ memset(portMap, 0, sizeof (portMap));
+
+ // include portID in port map
+ portMap[portID / 8] = 1 << (portID % 8);
+ @endverbatim
+ *
+ * - Reentrant - no
+ * - ISR Callable - no
+ *
+ * @note Setting dependency maps is useful for NPE ports, which benefit from automatic updates
+ * of filtering information. Setting dependency maps for user-defined ports is not an error
+ * but will have no actual effect.
+ *
+ * @note Including a port in its own dependency map is not compulsory, however note that
+ * in this case updating the port will not trigger an update on the port itself, which
+ * might not be the intended behavior
+ *
+ * @retval IX_ETH_DB_SUCCESS operation completed successfully
+ * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier
+ * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized
+ * @retval IX_ETH_DB_INVALID_ARG invalid <i>dependencyPortMap</i> pointer
+ * @retval IX_ETH_DB_FEATURE_UNAVAILABLE Filtering is not available or not enabled for the port
+ */
+IX_ETH_DB_PUBLIC
+IxEthDBStatus ixEthDBPortDependencyMapSet(IxEthDBPortId portID, IxEthDBPortMap dependencyPortMap);
+
+/**
+ * @ingroup IxEthDB
+ *
+ * @fn IxEthDBStatus ixEthDBPortDependencyMapGet(IxEthDBPortId portID, IxEthDBPortMap dependencyPortMap)
+ *
+ * @brief Retrieves the dependency port map for a port
+ *
+ * @param portID ID of the port to set the dependency map to
+ * @param dependencyPortMap location where the port dependency map is to be copied
+ *
+ * This function will copy the port dependency map to a user specified location.
+ *
+ * - Reentrant - no
+ * - ISR Callable - no
+ *
+ * @retval IX_ETH_DB_SUCCESS operation completed successfully
+ * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier
+ * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized
+ * @retval IX_ETH_DB_INVALID_ARG invalid <i>dependencyPortMap</i> pointer
+ * @retval IX_ETH_DB_FEATURE_UNAVAILABLE Filtering is not available or not enabled for the port
+ */
+IX_ETH_DB_PUBLIC
+IxEthDBStatus ixEthDBPortDependencyMapGet(IxEthDBPortId portID, IxEthDBPortMap dependencyPortMap);
+
+/**
+ * @ingroup IxEthDB
+ *
+ * @fn IxEthDBStatus ixEthDBPortVlanTagSet(IxEthDBPortId portID, IxEthDBVlanTag vlanTag)
+ *
+ * @brief Sets the default 802.1Q VLAN tag for a given port
+ *
+ * @param portID @ref IxEthDBPortId [in] - ID of the port to set the default VLAN tag to
+ * @param vlanTag @ref IxEthDBVlanTag [in] - default 802.1Q VLAN tag
+ *
+ * The tag format has 16 bits and it is defined in the IEEE802.1Q specification.
+ * This tag will be used for tagging untagged frames (if enabled) and classifying
+ * unexpedited traffic into an internal traffic class (using the user priority field).
+ *
+ * <table border="1"> <caption> 802.1Q tag format </caption>
+ * <tr> <td> <b> 3 bits <td> <b> 1 bit <td> <b> 12 bits </b>
+ * <tr> <td> user priority <td> CFI <td> VID
+ * </table>
+ *
+ * User Priority : Defines user priority, giving eight (2^3) priority levels. IEEE 802.1P defines
+ * the operation for these 3 user priority bits
+ *
+ * CFI : Canonical Format Indicator is always set to zero for Ethernet switches. CFI is used for
+ * compatibility reason between Ethernet type network and Token Ring type network. If a frame received
+ * at an Ethernet port has a CFI set to 1, then that frame should not be forwarded as it is to an untagged port.
+ *
+ * VID : VLAN ID is the identification of the VLAN, which is basically used by the standard 802.1Q.
+ * It has 12 bits and allow the id entification of 4096 (2^12) VLANs. Of the 4096 possible VIDs, a VID of 0
+ * is used to identify priority frames and value 4095 (FFF) is reserved, so the maximum possible VLAN
+ * configurations are 4,094.
+ *
+ * - Reentrant - no
+ * - ISR Callable - no
+ *
+ * @retval IX_ETH_DB_SUCCESS operation completed successfully
+ * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier
+ * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized
+ * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port
+ * @retval IX_ETH_DB_INVALID_VLAN <i>vlanTag</i> argument does not parse to a valid 802.1Q VLAN tag
+ *
+ * @note a VLAN ID value of 0 indicates that the port is not part of any VLAN
+ * @note the value of the cannonical frame indicator (CFI) field is ignored, the
+ * field being used only in frame tagging operations
+ */
+IX_ETH_DB_PUBLIC
+IxEthDBStatus ixEthDBPortVlanTagSet(IxEthDBPortId portID, IxEthDBVlanTag vlanTag);
+
+/**
+ * @ingroup IxEthDB
+ *
+ * @fn IxEthDBStatus ixEthDBPortVlanTagGet(IxEthDBPortId portID, IxEthDBVlanTag *vlanTag)
+ *
+ * @brief Retrieves the default 802.1Q port VLAN tag for a given port (see also @ref ixEthDBPortVlanTagSet)
+ *
+ * @param portID @ref IxEthDBPortId [in] - ID of the port to retrieve the default VLAN tag from
+ * @param vlanTag @ref IxEthDBVlanTag [out] - location to write the default port 802.1Q VLAN tag to
+ *
+ * - Reentrant - no
+ * - ISR Callable - no
+ *
+ * @retval IX_ETH_DB_SUCCESS operation completed successfully
+ * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier
+ * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized
+ * @retval IX_ETH_DB_INVALID_ARG invalid vlanTag pointer
+ * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port
+ */
+IX_ETH_DB_PUBLIC
+IxEthDBStatus ixEthDBPortVlanTagGet(IxEthDBPortId portID, IxEthDBVlanTag *vlanTag);
+
+/**
+ * @ingroup IxEthDB
+ *
+ * @fn IxEthDBStatus ixEthDBVlanTagSet(IxEthDBMacAddr *macAddr, IxEthDBVlanTag vlanTag)
+ *
+ * @brief Sets the 802.1Q VLAN tag for a database record
+ *
+ * @param macAddr MAC address
+ * @param vlanTag 802.1Q VLAN tag
+ *
+ * This function is used together with @ref ixEthDBVlanTagGet to provide MAC-based VLAN classification support.
+ * Please note that the bridging application must contain specific code to make use of this feature (see below).
+ *
+ * VLAN tags can be set only in IX_ETH_DB_FILTERING_RECORD or IX_ETH_DB_FILTERING_VLAN_RECORD type records.
+ * If to an IX_ETH_DB_FILTERING_RECORD type record is added a VLAN tag the record type is automatically
+ * changed to IX_ETH_DB_FILTERING_VLAN_RECORD. Once this has occurred the record type will never
+ * revert to a non-VLAN type (unless deleted and re-added).
+ *
+ * Record types used for different purposes (such as IX_ETH_DB_WIFI_RECORD) will be ignored by
+ * this function.
+ *
+ * After using this function to associate a VLAN ID with a MAC address the VLAN ID can be extracted knowing the
+ * MAC address using @ref ixEthDBVlanTagGet. This mechanism can be used to implement MAC-based VLAN classification
+ * if a bridging application searches for the VLAN tag when receiving a frame based on the source MAC address
+ * (contained in the <i>ixp_ne_src_mac</i> field of the buffer header).
+ * If found in the database, the application can instruct the NPE to tag the frame by writing the VLAN tag
+ * in the <i>ixp_ne_vlan_tci</i> field of the buffer header. This way the NPE will inspect the Egress tagging
+ * rule associated with the given VLAN ID on the Tx port and tag the frame if Egress tagging on the VLAN is
+ * allowed. Additionally, Egress tagging can be forced by setting the <i>ixp_ne_tx_flags.tag_over</i> and
+ * <i>ixp_ne_tx_flags.tag_mode</i> flags in the buffer header.
+ *
+ * - Reentrant - no
+ * - ISR Callable - no
+ *
+ * @note this function will <b>not</b> add a filtering record, it can only be used to update an existing one
+ *
+ * @retval IX_ETH_DB_SUCCESS operation completed successfully
+ * @retval IX_ETH_DB_INVALID_ARG invalid <i>macAddr</i> pointer
+ * @retval IX_ETH_DB_NO_SUCH_ADDR a filtering record with the specified MAC address was not found
+ * @retval IX_ETH_DB_INVALID_VLAN <i>vlanTag</i> argument does not parse to a valid 802.1Q VLAN tag
+ */
+IX_ETH_DB_PUBLIC
+IxEthDBStatus ixEthDBVlanTagSet(IxEthDBMacAddr *macAddr, IxEthDBVlanTag vlanTag);
+
+/**
+ * @ingroup IxEthDB
+ *
+ * @fn ixEthDBVlanTagGet(IxEthDBMacAddr *macAddr, IxEthDBVlanTag *vlanTag)
+ *
+ * @brief Retrieves the 802.1Q VLAN tag from a database record given the record MAC address
+ *
+ * @param macAddr MAC address
+ * @param vlanTag location to write the record 802.1Q VLAN tag to
+ *
+ * @note VLAN tags can be retrieved only from IX_ETH_DB_FILTERING_VLAN_RECORD type records
+ *
+ * This function is used together with ixEthDBVlanTagSet to provide MAC-based VLAN classification support.
+ * Please note that the bridging application must contain specific code to make use of this feature (see @ref ixEthDBVlanTagSet).
+ *
+ * - Reentrant - no
+ * - ISR Callable - no
+ *
+ * @retval IX_ETH_DB_SUCCESS operation completed successfully
+ * @retval IX_ETH_DB_INVALID_ARG invalid <i>macAddr</i> or <i>vlanTag</i> pointer
+ * @retval IX_ETH_DB_NO_SUCH_ADDR a filtering record with the specified MAC address was not found
+ */
+IX_ETH_DB_PUBLIC
+IxEthDBStatus ixEthDBVlanTagGet(IxEthDBMacAddr *macAddr, IxEthDBVlanTag *vlanTag);
+
+/**
+ * @ingroup IxEthDB
+ *
+ * @fn IxEthDBStatus ixEthDBPortVlanMembershipAdd(IxEthDBPortId portID, IxEthDBVlanId vlanID)
+ *
+ * @brief Adds a VLAN ID to a port's VLAN membership table
+ *
+ * Adding a VLAN ID to a port's VLAN membership table will cause frames tagged with the specified
+ * VLAN ID to be accepted by the frame filter, if Ingress VLAN membership filtering is enabled.
+ *
+ * - Reentrant - no
+ * - ISR Callable - no
+ *
+ * @param portID @ref IxEthDBPortId [in] - ID of the port to add the VLAN ID membership to
+ * @param vlanID @ref IxEthDBVlanId [in] - VLAN ID to be added to the port membership table
+ *
+ * @retval IX_ETH_DB_SUCCESS operation completed successfully
+ * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier
+ * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized
+ * @retval IX_ETH_DB_INVALID_VLAN vlanID is not a valid VLAN ID
+ * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port
+ * @retval IX_FAIL unknown OS or NPE communication error
+ *
+ * @note A port's default VLAN ID is always in its own membership table, hence there
+ * is no need to explicitly add it using this function (although it is not an error
+ * to do so)
+ */
+IX_ETH_DB_PUBLIC
+IxEthDBStatus ixEthDBPortVlanMembershipAdd(IxEthDBPortId portID, IxEthDBVlanId vlanID);
+
+/**
+ * @ingroup IxEthDB
+ *
+ * @fn IxEthDBStatus ixEthDBPortVlanMembershipRangeAdd(IxEthDBPortId portID, IxEthDBVlanId vlanIDMin, IxEthDBVlanId vlanIDMax)
+ *
+ * @brief Adds a VLAN ID range to a port's VLAN membership table
+ *
+ * All the VLAN IDs in the specified range will be added to the port VLAN
+ * membership table, including the range start and end VLAN IDs. Tagged frames with
+ * VLAN IDs in the specified range will be accepted by the frame filter, if Ingress VLAN
+ * membership filtering is enabled.
+ *
+ * - Reentrant - no
+ * - ISR Callable - no
+ *
+ * @param portID @ref IxEthDBPortId [in] - port ID to add the VLAN membership range into
+ * @param vlanIDMin @ref IxEthDBVlanId [in] - start of the VLAN ID range
+ * @param vlanIDMax @ref IxEthDBVlanId [in] - end of the VLAN ID range
+ *
+ * @retval IX_ETH_DB_SUCCESS operation completed successfully
+ * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier
+ * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized
+ * @retval IX_ETH_DB_INVALID_VLAN the specified VLAN IDs are invalid or do not constitute a range
+ * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port
+ * @retval IX_FAIL unknown OS or NPE communication error
+ *
+ * @note Is is valid to use the same VLAN ID for both vlanIDMin and vlanIDMax, in which case this
+ * function will behave as @ref ixEthDBPortVlanMembershipAdd
+ *
+ * @note A port's default VLAN ID is always in its own membership table, hence there is no need
+ * to explicitly add it using this function (although it is not an error to do so)
+ */
+IX_ETH_DB_PUBLIC
+IxEthDBStatus ixEthDBPortVlanMembershipRangeAdd(IxEthDBPortId portID, IxEthDBVlanId vlanIDMin, IxEthDBVlanId vlanIDMax);
+
+/**
+ * @ingroup IxEthDB
+ *
+ * @fn IxEthDBStatus ixEthDBPortVlanMembershipRemove(IxEthDBPortId portID, IxEthDBVlanId vlanID)
+ *
+ * @brief Removes a VLAN ID from a port's VLAN membership table
+ *
+ * Frames tagged with a VLAN ID which is not in a port's VLAN membership table
+ * will be discarded by the frame filter, if Ingress membership filtering is enabled.
+ *
+ * - Reentrant - no
+ * - ISR Callable - no
+ *
+ * @param portID @ref IxEthDBPortId [in] - ID of the port to remove the VLAN ID membership from
+ * @param vlanID @ref IxEthDBVlanId [in] - VLAN ID to be removed from the port membership table
+ *
+ * @retval IX_ETH_DB_SUCCESS operation completed successfully
+ * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier
+ * @retval IX_ETH_DB_INVALID_VLAN vlanID is not a valid VLAN ID
+ * @retval IX_ETH_DB_NO_PERMISSION attempted to remove the default VLAN ID
+ * from the port membership table (vlanID was set to the default port VLAN ID)
+ * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port
+ * @retval IX_FAIL unknown OS or NPE communication error
+ *
+ * @note A port's default VLAN ID cannot be removed from the port's membership
+ * table; attempting it will return IX_ETH_DB_NO_PERMISSION
+ */
+IX_ETH_DB_PUBLIC
+IxEthDBStatus ixEthDBPortVlanMembershipRemove(IxEthDBPortId portID, IxEthDBVlanId vlanID);
+
+/**
+ * @ingroup IxEthDB
+ *
+ * @fn IxEthDBStatus ixEthDBPortVlanMembershipRangeRemove(IxEthDBPortId portID, IxEthDBVlanId vlanIDMin, IxEthDBVlanId vlanIDMax)
+ *
+ * @brief Removes a VLAN ID range from a port's VLAN membership table
+ *
+ * All the VLAN IDs in the specified range will be removed from the port VLAN
+ * membership table, including the range start and end VLAN IDs. Tagged frames
+ * with VLAN IDs in the range will be discarded by the frame filter, if Ingress
+ * membership filtering is enabled.
+ *
+ * - Reentrant - no
+ * - ISR Callable - no
+ *
+ * @param portID @ref IxEthDBPortId [in] - ID of the port to remove the VLAN membership range from
+ * @param vlanIDMin @ref IxEthDBVlanId [in] - start of the VLAN ID range
+ * @param vlanIDMax @ref IxEthDBVlanId [in] - end of the VLAN ID range
+ *
+ * @retval IX_ETH_DB_SUCCESS operation completed successfully
+ * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier
+ * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized
+ * @retval IX_ETH_DB_INVALID_VLAN the specified VLAN IDs are invalid or do not constitute a range
+ * @retval IX_ETH_DB_NO_PERMISSION attempted to remove the default VLAN ID
+ * from the port membership table (both vlanIDMin and vlanIDMax were set to the default port VLAN ID)
+ * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port
+ * @retval IX_FAIL unknown OS or NPE communication error
+ *
+ * @note Is is valid to use the same VLAN ID for both vlanIDMin and vlanIDMax, in which case
+ * function will behave as @ref ixEthDBPortVlanMembershipRemove
+ *
+ * @note If the given range overlaps the default port VLAN ID this function
+ * will remove all the VLAN IDs in the range except for the port VLAN ID from its
+ * own membership table. This situation will be silently dealt with (no error message
+ * will be returned) as long as the range contains more than one value (i.e. at least
+ * one other value, apart from the default port VLAN ID). If the function is called
+ * with the vlanIDMin and vlanIDMax parameters both set to the port default VLAN ID, the
+ * function will infer that an attempt was specifically made to remove the default port
+ * VLAN ID from the port membership table, in which case the return value will be
+ * IX_ETH_DB_NO_PERMISSION.
+ */
+IX_ETH_DB_PUBLIC
+IxEthDBStatus ixEthDBPortVlanMembershipRangeRemove(IxEthDBPortId portID, IxEthDBVlanId vlanIDMin, IxEthDBVlanId vlanIDMax);
+
+/**
+ * @ingroup IxEthDB
+ *
+ * @fn IxEthDBStatus ixEthDBPortVlanMembershipSet(IxEthDBPortId portID, IxEthDBVlanSet vlanSet)
+ *
+ * @brief Sets a port's VLAN membership table
+ *
+ * Sets a port's VLAN membership table from a complete VLAN table containing all the possible
+ * 4096 VLAN IDs. The table format is an array containing 4096 bits (512 bytes), where each bit
+ * indicates whether the VLAN at that bit index is in the port's membership list (if set) or
+ * not (unset).
+ *
+ * The bit at index 0, indicating VLAN ID 0, indicates no VLAN membership and therefore no
+ * other bit must be set if bit 0 is set.
+ *
+ * The bit at index 4095 is reserved and should never be set (it will be ignored if set).
+ *
+ * The bit referencing the same VLAN ID as the default port VLAN ID should always be set, as
+ * the membership list must contain at least the default port VLAN ID.
+ *
+ * - Reentrant - no
+ * - ISR Callable - no
+ *
+ * @param portID @ref IxEthDBPortId [in] - port ID to set the VLAN membership table to
+ * @param vlanSet @ref IxEthDBVlanSet [in] - pointer to the VLAN membership table
+ *
+ * @retval IX_ETH_DB_SUCCESS operation completed successfully
+ * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier
+ * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized
+ * @retval IX_ETH_DB_INVALID_ARG invalid <i>vlanSet</i> pointer
+ * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port
+ * @retval IX_FAIL unknown OS or NPE communication error
+ */
+IX_ETH_DB_PUBLIC
+IxEthDBStatus ixEthDBPortVlanMembershipSet(IxEthDBPortId portID, IxEthDBVlanSet vlanSet);
+
+/**
+ * @ingroup IxEthDB
+ *
+ * @fn IxEthDBStatus ixEthDBPortVlanMembershipGet(IxEthDBPortId portID, IxEthDBVlanSet vlanSet)
+ *
+ * @brief Retrieves a port's VLAN membership table
+ *
+ * Retrieves the complete VLAN membership table from a port, containing all the possible
+ * 4096 VLAN IDs. The table format is an array containing 4096 bits (512 bytes), where each bit
+ * indicates whether the VLAN at that bit index is in the port's membership list (if set) or
+ * not (unset).
+ *
+ * The bit at index 0, indicating VLAN ID 0, indicates no VLAN membership and therefore no
+ * other bit will be set if bit 0 is set.
+ *
+ * The bit at index 4095 is reserved and will not be set (it will be ignored if set).
+ *
+ * The bit referencing the same VLAN ID as the default port VLAN ID will always be set, as
+ * the membership list must contain at least the default port VLAN ID.
+ *
+ * - Reentrant - no
+ * - ISR Callable - no
+ *
+ * @param portID @ref IxEthDBPortId [in] - port ID to retrieve the VLAN membership table from
+ * @param vlanSet @ref IxEthDBVlanSet [out] - pointer a location where the VLAN membership table will be
+ * written to
+ *
+ * @retval IX_ETH_DB_SUCCESS operation completed successfully
+ * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier
+ * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized
+ * @retval IX_ETH_DB_INVALID_ARG invalid <i>vlanSet</i> pointer
+ * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port
+ */
+IX_ETH_DB_PUBLIC
+IxEthDBStatus ixEthDBPortVlanMembershipGet(IxEthDBPortId portID, IxEthDBVlanSet vlanSet);
+
+/**
+ * @ingroup IxEthDB
+ *
+ * @fn IxEthDBStatus ixEthDBAcceptableFrameTypeSet(IxEthDBPortId portID, IxEthDBFrameFilter frameFilter)
+ *
+ * @brief Sets a port's acceptable frame type filter
+ *
+ * The acceptable frame type is one (or a combination) of the following values:
+ * - IX_ETH_DB_ACCEPT_ALL_FRAMES - accepts all the frames
+ * - IX_ETH_DB_UNTAGGED_FRAMES - accepts untagged frames
+ * - IX_ETH_DB_VLAN_TAGGED_FRAMES - accepts tagged frames
+ * - IX_ETH_DB_PRIORITY_TAGGED_FRAMES - accepts tagged frames with VLAN ID set to 0 (no VLAN membership)
+ *
+ * Except for using the exact values given above only the following combinations are valid:
+ * - IX_ETH_DB_UNTAGGED_FRAMES | IX_ETH_DB_VLAN_TAGGED_FRAMES
+ * - IX_ETH_DB_UNTAGGED_FRAMES | IX_ETH_DB_PRIORITY_TAGGED_FRAMES
+ *
+ * Please note that IX_ETH_DB_UNTAGGED_FRAMES | IX_ETH_DB_VLAN_TAGGED_FRAMES is equivalent
+ * to IX_ETH_DB_ACCEPT_ALL_FRAMES.
+ *
+ * - Reentrant - no
+ * - ISR Callable - no
+ *
+ * @note by default the acceptable frame type filter is set to IX_ETH_DB_ACCEPT_ALL_FRAMES
+ *
+ * @note setting the acceptable frame type to PRIORITY_TAGGED_FRAMES is internally
+ * accomplished by changing the frame filter to VLAN_TAGGED_FRAMES and setting the
+ * VLAN membership list to include only VLAN ID 0; the membership list will need
+ * to be restored manually to an appropriate value if the acceptable frame type
+ * filter is changed back to ACCEPT_ALL_FRAMES or VLAN_TAGGED_FRAMES; failure to do so
+ * will filter all VLAN traffic bar frames tagged with VLAN ID 0
+ *
+ * @param portID @ref IxEthDBPortId [in] - port ID to set the acceptable frame type filter to
+ * @param frameFilter @ref IxEthDBFrameFilter [in] - acceptable frame type filter
+ *
+ * @retval IX_ETH_DB_SUCCESS operation completed successfully
+ * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier
+ * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized
+ * @retval IX_ETH_DB_INVALID_ARG invalid frame type filter
+ * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port
+ * @retval IX_FAIL unknown OS or NPE communication error
+ */
+IX_ETH_DB_PUBLIC
+IxEthDBStatus ixEthDBAcceptableFrameTypeSet(IxEthDBPortId portID, IxEthDBFrameFilter frameFilter);
+
+/**
+ * @ingroup IxEthDB
+ *
+ * @fn IxEthDBStatus ixEthDBAcceptableFrameTypeGet(IxEthDBPortId portID, IxEthDBFrameFilter *frameFilter)
+ *
+ * @brief Retrieves a port's acceptable frame type filter
+ *
+ * For a description of the acceptable frame types see @ref ixEthDBAcceptableFrameTypeSet
+ *
+ * - Reentrant - no
+ * - ISR Callable - no
+ *
+ * @param portID @ref IxEthDBPortId [in] - port ID to retrieve the acceptable frame type filter from
+ * @param frameFilter @ref IxEthDBFrameFilter [out] - location to store the acceptable frame type filter
+ *
+ * @retval IX_ETH_DB_SUCCESS operation completed successfully
+ * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier
+ * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized
+ * @retval IX_ETH_DB_INVALID_ARG invalid <i>frameFilter</i> pointer argument
+ * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port
+ */
+IX_ETH_DB_PUBLIC
+IxEthDBStatus ixEthDBAcceptableFrameTypeGet(IxEthDBPortId portID, IxEthDBFrameFilter *frameFilter);
+
+/**
+ * @ingroup IxEthDB
+ *
+ * @fn IxEthDBStatus ixEthDBPriorityMappingTableSet(IxEthDBPortId portID, IxEthDBPriorityTable priorityTable)
+ *
+ * @brief Sets a port's priority mapping table
+ *
+ * The priority mapping table is an 8x2 table mapping a QoS (user) priority into an internal
+ * traffic class. There are 8 valid QoS priorities (0..7, 0 being the lowest) which can be
+ * mapped into one of the 4 available traffic classes (0..3, 0 being the lowest).
+ * If a custom priority mapping table is not specified using this function the following
+ * default priority table will be used (as per IEEE 802.1Q and IEEE 802.1D):
+ *
+ * <table border="1"> <caption> QoS traffic classes </caption>
+ * <tr> <td> <b> QoS priority <td> <b> Default traffic class <td> <b> Traffic type </b>
+ * <tr> <td> 0 <td> 1 <td> Best effort, default class for unexpedited traffic
+ * <tr> <td> 1 <td> 0 <td> Background traffic
+ * <tr> <td> 2 <td> 0 <td> Spare bandwidth
+ * <tr> <td> 3 <td> 1 <td> Excellent effort
+ * <tr> <td> 4 <td> 2 <td> Controlled load
+ * <tr> <td> 5 <td> 2 <td> Video traffic
+ * <tr> <td> 6 <td> 3 <td> Voice traffic
+ * <tr> <td> 7 <td> 3 <td> Network control
+ * </table>
+ *
+ * - Reentrant - no
+ * - ISR Callable - no
+ *
+ * @param portID @ref IxEthDBPortId [in] - port ID of the port to set the priority mapping table to
+ * @param priorityTable @ref IxEthDBPriorityTable [in] - location of the user priority table
+ *
+ * @note The provided table will be copied into internal data structures in EthDB and
+ * can be deallocated by the called after this function has completed its execution, if
+ * so desired
+ *
+ * @warning The number of available traffic classes differs depending on the NPE images
+ * and queue configuration. Check IxEthDBQoS.h for up-to-date information on the availability of
+ * traffic classes. Note that specifiying a traffic class in the priority map which exceeds
+ * the system availability will produce an IX_ETH_DB_INVALID_PRIORITY return error code and no
+ * priority will be remapped.
+ *
+ * @retval IX_ETH_DB_SUCCESS operation completed successfully
+ * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier
+ * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized
+ * @retval IX_ETH_DB_INVALID_ARG invalid <i>priorityTable</i> pointer
+ * @retval IX_ETH_DB_INVALID_PRIORITY at least one priority value exceeds
+ * the current number of available traffic classes
+ * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port
+ * @retval IX_FAIL unknown OS or NPE communication error
+ */
+IX_ETH_DB_PUBLIC
+IxEthDBStatus ixEthDBPriorityMappingTableSet(IxEthDBPortId portID, IxEthDBPriorityTable priorityTable);
+
+/**
+ * @ingroup IxEthDB
+ *
+ * @fn IxEthDBStatus ixEthDBPriorityMappingTableGet(IxEthDBPortId portID, IxEthDBPriorityTable priorityTable)
+ *
+ * @brief Retrieves a port's priority mapping table
+ *
+ * The priority mapping table for the given port will be copied in the location
+ * specified by the caller using "priorityTable"
+ *
+ * - Reentrant - no
+ * - ISR Callable - no
+ *
+ * @param portID ID @ref IxEthDBPortId [in] - of the port to retrieve the priority mapping table from
+ * @param priorityTable @ref IxEthDBPriorityTable [out] - pointer to a user specified location where the table will be copied to
+ *
+ * @retval IX_ETH_DB_SUCCESS operation completed successfully
+ * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier
+ * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized
+ * @retval IX_ETH_DB_INVALID_ARG invalid priorityTable pointer
+ * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port
+ */
+IX_ETH_DB_PUBLIC
+IxEthDBStatus ixEthDBPriorityMappingTableGet(IxEthDBPortId portID, IxEthDBPriorityTable priorityTable);
+
+/**
+ * @ingroup IxEthDB
+ *
+ * @fn IxEthDBStatus ixEthDBPriorityMappingClassSet(IxEthDBPortId portID, IxEthDBPriority userPriority, IxEthDBPriority trafficClass)
+ *
+ * @brief Sets one QoS/user priority => traffic class mapping in a port's priority mapping table
+ *
+ * This function establishes a mapping between a user (QoS) priority and an internal traffic class.
+ * The mapping will be saved in the port's priority mapping table. Use this function when not all
+ * the QoS priorities need remapping (see also @ref ixEthDBPriorityMappingTableSet)
+ *
+ * - Reentrant - no
+ * - ISR Callable - no
+ *
+ * @param portID @ref IxEthDBPortId [in] - ID of the port to set the mapping to
+ * @param userPriority @ref IxEthDBPriority [in] - user (QoS) priority, between 0 and 7 (0 being the lowest)
+ * @param trafficClass @ref IxEthDBPriority [in] - internal traffic class, between 0 and 3 (0 being the lowest)
+ *
+ * @retval IX_ETH_DB_SUCCESS operation completed successfully
+ * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier
+ * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized
+ * @retval IX_ETH_DB_INVALID_PRIORITY <i>userPriority</i> out of range or
+ * <i>trafficClass</i> is beyond the number of currently available traffic classes
+ * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port
+ * @retval IX_FAIL unknown OS or NPE communication error
+ */
+IX_ETH_DB_PUBLIC
+IxEthDBStatus ixEthDBPriorityMappingClassSet(IxEthDBPortId portID, IxEthDBPriority userPriority, IxEthDBPriority trafficClass);
+
+/**
+ * @ingroup IxEthDB
+ *
+ * @fn IxEthDBStatus ixEthDBPriorityMappingClassGet(IxEthDBPortId portID, IxEthDBPriority userPriority, IxEthDBPriority *trafficClass)
+ *
+ * @brief Retrieves one QoS/user priority => traffic class mapping in a port's priority mapping table
+ *
+ * This function retrieves the internal traffic class associated with a QoS (user) priority from a given
+ * port's priority mapping table. Use this function when not all the QoS priority mappings are
+ * required (see also @ref ixEthDBPriorityMappingTableGet)
+ *
+ * - Reentrant - no
+ * - ISR Callable - no
+ *
+ * @param portID @ref IxEthDBPortId [in] - ID of the port to set the mapping to
+ * @param userPriority @ref IxEthDBPriority [in] - user (QoS) priority, between 0 and 7 (0 being the lowest)
+ * @param trafficClass @ref IxEthDBPriority [out] - location to write the corresponding internal traffic class to
+ *
+ * @retval IX_ETH_DB_SUCCESS operation completed successfully
+ * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier
+ * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized
+ * @retval IX_ETH_DB_INVALID_PRIORITY invalid userPriority value (out of range)
+ * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port
+ * @retval IX_ETH_DB_INVALID_ARG invalid <i>trafficClass</i> pointer argument
+ */
+IX_ETH_DB_PUBLIC
+IxEthDBStatus ixEthDBPriorityMappingClassGet(IxEthDBPortId portID, IxEthDBPriority userPriority, IxEthDBPriority *trafficClass);
+
+/**
+ * @ingroup IxEthDB
+ *
+ * @fn IxEthDBStatus ixEthDBEgressVlanEntryTaggingEnabledSet(IxEthDBPortId portID, IxEthDBVlanId vlanID, BOOL enabled)
+ *
+ * @brief Enables or disables Egress VLAN tagging for a port and a given VLAN
+ *
+ * This function enables or disables Egress VLAN tagging for the given port and VLAN ID.
+ * If the VLAN tagging for a certain VLAN ID is enabled then all the frames to be
+ * transmitted on the given port tagged with the same VLAN ID will be transmitted in a tagged format.
+ * If tagging is not enabled for the given VLAN ID, the VLAN tag from the frames matching
+ * this VLAN ID will be removed (the frames will be untagged).
+ *
+ * VLAN ID 4095 is reserved and should never be used with this function.
+ * VLAN ID 0 has the special meaning of "No VLAN membership" and it is used in this
+ * context to allow the port to send priority-tagged frames or not.
+ *
+ * By default, no Egress VLAN tagging is enabled on any port.
+ *
+ * - Reentrant - no
+ * - ISR Callable - no
+ *
+ * @param portID @ref IxEthDBPortId [in] - ID of the port to enable or disable the VLAN ID Egress tagging on
+ * @param vlanID @ref IxEthDBVlanId [in] - VLAN ID to be matched against outgoing frames
+ * @param enabled BOOL [in] - TRUE to enable Egress VLAN tagging on the port and given VLAN, and
+ * FALSE to disable Egress VLAN tagging
+ *
+ * @retval IX_ETH_DB_SUCCESS operation completed successfully
+ * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier
+ * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized
+ * @retval IX_ETH_DB_INVALID_VLAN invalid VLAN ID (out of range)
+ * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port
+ * @retval IX_FAIL unknown OS or NPE communication error
+ */
+IX_ETH_DB_PUBLIC
+IxEthDBStatus ixEthDBEgressVlanEntryTaggingEnabledSet(IxEthDBPortId portID, IxEthDBVlanId vlanID, BOOL enabled);
+
+/**
+ * @ingroup IxEthDB
+ *
+ * @fn IxEthDBStatus ixEthDBEgressVlanEntryTaggingEnabledGet(IxEthDBPortId portID, IxEthDBVlanId vlanID, BOOL *enabled)
+ *
+ * @brief Retrieves the Egress VLAN tagging enabling status for a port and VLAN ID
+ *
+ * @param portID [in] - ID of the port to extract the Egress VLAN ID tagging status from
+ * @param vlanID VLAN [in] - ID whose tagging status is to be extracted
+ * @param enabled [in] - user-specifed location where the status is copied to; following
+ * the successfull execution of this function the value will be TRUE if Egress VLAN
+ * tagging is enabled for the given port and VLAN ID, and FALSE otherwise
+ *
+ * - Reentrant - no
+ * - ISR Callable - no
+ *
+ * @see ixEthDBEgressVlanEntryTaggingEnabledGet
+ *
+ * @retval IX_ETH_DB_SUCCESS operation completed successfully
+ * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier
+ * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized
+ * @retval IX_ETH_DB_INVALID_VLAN invalid VLAN ID (out of range)
+ * @retval IX_ETH_DB_INVALID_ARG invalid <i>enabled</i> argument pointer
+ * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port
+ */
+IX_ETH_DB_PUBLIC
+IxEthDBStatus ixEthDBEgressVlanEntryTaggingEnabledGet(IxEthDBPortId portID, IxEthDBVlanId vlanID, BOOL *enabled);
+
+/**
+ * @ingroup IxEthDB
+ *
+ * @fn IxEthDBStatus ixEthDBEgressVlanRangeTaggingEnabledSet(IxEthDBPortId portID, IxEthDBVlanId vlanIDMin, IxEthDBVlanId vlanIDMax, BOOL enabled)
+ *
+ * @brief Enables or disables Egress VLAN tagging for a port and given VLAN range
+ *
+ * This function is very similar to @ref ixEthDBEgressVlanEntryTaggingEnabledSet with the
+ * difference that it can manipulate the Egress tagging status on multiple VLAN IDs,
+ * defined by a contiguous range. Note that both limits in the range are explicitly
+ * included in the execution of this function.
+ *
+ * - Reentrant - no
+ * - ISR Callable - no
+ *
+ * @param portID @ref IxEthDBPortId [in] - ID of the port to enable or disable the VLAN ID Egress tagging on
+ * @param vlanIDMin @ref IxEthDBVlanId [in] - start of the VLAN range to be matched against outgoing frames
+ * @param vlanIDMax @ref IxEthDBVlanId [in] - end of the VLAN range to be matched against outgoing frames
+ * @param enabled BOOL [in] - TRUE to enable Egress VLAN tagging on the port and given VLAN range,
+ * and FALSE to disable Egress VLAN tagging
+ *
+ * @retval IX_ETH_DB_SUCCESS operation completed successfully
+ * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier
+ * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized
+ * @retval IX_ETH_DB_INVALID_VLAN invalid VLAN ID (out of range), or do not constitute a range
+ * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port
+ * @retval IX_ETH_DB_NO_PERMISSION attempted to explicitly remove the default port VLAN ID from the tagging table
+ * @retval IX_FAIL unknown OS or NPE communication error
+ *
+ * @note Specifically removing the default port VLAN ID from the Egress tagging table by setting both vlanIDMin and vlanIDMax
+ * to the VLAN ID portion of the PVID is not allowed by this function and will return IX_ETH_DB_NO_PERMISSION.
+ * However, this can be circumvented, should the user specifically desire this, by either using a
+ * larger range (vlanIDMin < vlanIDMax) or by using ixEthDBEgressVlanEntryTaggingEnabledSet.
+ */
+IX_ETH_DB_PUBLIC
+IxEthDBStatus ixEthDBEgressVlanRangeTaggingEnabledSet(IxEthDBPortId portID, IxEthDBVlanId vlanIDMin, IxEthDBVlanId vlanIDMax, BOOL enabled);
+
+/**
+ * @ingroup IxEthDB
+ *
+ * @fn IxEthDBStatus ixEthDBEgressVlanTaggingEnabledSet(IxEthDBPortId portID, IxEthDBVlanSet vlanSet)
+ *
+ * @brief Sets the complete Egress VLAN tagging table for a port
+ *
+ * This function is used to set the VLAN tagging/untagging per VLAN ID for a given port
+ * covering the entire VLAN ID range (0..4094). The <i>vlanSet</i> parameter is a 4096
+ * bit array, each bit indicating the Egress behavior for the corresponding VLAN ID.
+ * If a bit is set then outgoing frames with the corresponding VLAN ID will be transmitted
+ * with the VLAN tag, otherwise the frame will be transmitted without the VLAN tag.
+ *
+ * Bit 0 has a special significance, indicating tagging or tag removal for priority-tagged
+ * frames.
+ *
+ * Bit 4095 is reserved and should never be set (it will be ignored if set).
+ *
+ * - Reentrant - no
+ * - ISR Callable - no
+ *
+ * @param portID @ref IxEthDBPortId [in] - ID of the port whose Egress VLAN tagging behavior is set
+ * @param vlanSet @ref IxEthDBVlanSet [in] - 4096 bit array controlling per-VLAN tagging and untagging
+ *
+ * @retval IX_ETH_DB_SUCCESS operation completed successfully
+ * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier
+ * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized
+ * @retval IX_ETH_DB_INVALID_ARG invalid <i>vlanSet</i> pointer
+ * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port
+ * @retval IX_FAIL unknown OS or NPE communication error
+ *
+ * @warning This function will automatically add the default port VLAN ID to the Egress tagging table
+ * every time it is called. The user should manually call ixEthDBEgressVlanEntryTaggingEnabledSet to
+ * prevent tagging on the default port VLAN ID if the default behavior is not intended.
+ */
+IX_ETH_DB_PUBLIC
+IxEthDBStatus ixEthDBEgressVlanTaggingEnabledSet(IxEthDBPortId portID, IxEthDBVlanSet vlanSet);
+
+/**
+ * @ingroup IxEthDB
+ *
+ * @fn IxEthDBStatus ixEthDBEgressVlanTaggingEnabledGet(IxEthDBPortId portID, IxEthDBVlanSet vlanSet)
+ *
+ * @brief Retrieves the complete Egress VLAN tagging table from a port
+ *
+ * This function copies the 4096 bit table controlling the Egress VLAN tagging into a user specified
+ * area. Each bit in the array indicates whether tagging for the corresponding VLAN (the bit position
+ * in the array) is enabled (the bit is set) or not (the bit is unset).
+ *
+ * Bit 4095 is reserved and should not be set (it will be ignored if set).
+ *
+ * @see ixEthDBEgressVlanTaggingEnabledSet
+ *
+ * @param portID @ref IxEthDBPortId [in] - ID of the port whose Egress VLAN tagging behavior is retrieved
+ * @param vlanSet @ref IxEthDBVlanSet [out] - user location to copy the Egress tagging table into; should have
+ * room to store 4096 bits (512 bytes)
+ *
+ * @retval IX_ETH_DB_SUCCESS operation completed successfully
+ * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier
+ * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized
+ * @retval IX_ETH_DB_INVALID_ARG invalid <i>vlanSet</i> pointer
+ * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port
+ */
+IX_ETH_DB_PUBLIC
+IxEthDBStatus ixEthDBEgressVlanTaggingEnabledGet(IxEthDBPortId portID, IxEthDBVlanSet vlanSet);
+
+/**
+ * @ingroup IxEthDB
+ *
+ * @fn IxEthDBStatus ixEthDBIngressVlanTaggingEnabledSet(IxEthDBPortId portID, IxEthDBTaggingAction taggingAction)
+ *
+ * @brief Sets the Ingress VLAN tagging behavior for a port
+ *
+ * A port's Ingress tagging behavior is controlled by the taggingAction parameter,
+ * which can take one of the following values:
+ *
+ * - IX_ETH_DB_PASS_THROUGH - leaves the frame unchanged (does not add or remove the VLAN tag)
+ * - IX_ETH_DB_ADD_TAG - adds the VLAN tag if not present, using the default port VID
+ * - IX_ETH_DB_REMOVE_TAG - removes the VLAN tag if present
+ *
+ * @param portID @ref IxEthDBPortId [in] - ID of the port whose Ingress VLAN tagging behavior is set
+ * @param taggingAction @ref IxEthDBTaggingAction [in] - tagging behavior for the port
+ *
+ * @retval IX_ETH_DB_SUCCESS operation completed successfully
+ * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier
+ * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized
+ * @retval IX_ETH_DB_INVALID_ARG invalid <i>taggingAction</i> argument
+ * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port
+ * @retval IX_FAIL unknown OS or NPE communication error
+ */
+IX_ETH_DB_PUBLIC
+IxEthDBStatus ixEthDBIngressVlanTaggingEnabledSet(IxEthDBPortId portID, IxEthDBTaggingAction taggingAction);
+
+/**
+ * @ingroup IxEthDB
+ *
+ * @fn IxEthDBStatus ixEthDBIngressVlanTaggingEnabledGet(IxEthDBPortId portID, IxEthDBTaggingAction *taggingAction)
+ *
+ * @brief Retrieves the Ingress VLAN tagging behavior from a port (see @ref ixEthDBIngressVlanTaggingEnabledSet)
+ *
+ * @param portID @ref IxEthDBPortId [in] - ID of the port whose Ingress VLAN tagging behavior is set
+ * @param taggingAction @ref IxEthDBTaggingAction [out] - location where the tagging behavior for the port is written to
+ *
+ * @retval IX_ETH_DB_SUCCESS operation completed successfully
+ * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier
+ * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized
+ * @retval IX_ETH_DB_INVALID_ARG invalid <i>taggingAction</i> pointer argument
+ * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port
+ */
+IX_ETH_DB_PUBLIC
+IxEthDBStatus ixEthDBIngressVlanTaggingEnabledGet(IxEthDBPortId portID, IxEthDBTaggingAction *taggingAction);
+
+/**
+ * @ingroup IxEthDB
+ *
+ * @fn IxEthDBStatus ixEthDBVlanPortExtractionEnable(IxEthDBPortId portID, BOOL enable)
+ *
+ * @brief Enables or disables port ID extraction
+ *
+ * This feature can be used in the situation when a multi-port device (e.g. a switch)
+ * is connected to an IXP4xx port and the device can provide incoming frame port
+ * identification by tagging the TPID field in the Ethernet frame. Enabling
+ * port extraction will instruct the NPE to copy the TPID field from the frame and
+ * place it in the <i>ixp_ne_src_port</i> of the <i>ixp_buf</i> header. In addition,
+ * the NPE restores the TPID field to 0.
+ *
+ * If the frame is not tagged the NPE will fill the <i>ixp_ne_src_port</i> with the
+ * port ID of the MII interface the frame was received from.
+ *
+ * The TPID field is the least significant byte of the type/length field, which is
+ * normally set to 0x8100 for 802.1Q-tagged frames.
+ *
+ * This feature is disabled by default.
+ *
+ * @param portID ID of the port to configure port ID extraction on
+ * @param enable TRUE to enable port ID extraction and FALSE to disable it
+ *
+ * @retval IX_ETH_DB_SUCCESS operation completed successfully
+ * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier
+ * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized
+ * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port
+ * @retval IX_FAIL unknown OS or NPE communication error
+ */
+IX_ETH_DB_PUBLIC
+IxEthDBStatus ixEthDBVlanPortExtractionEnable(IxEthDBPortId portID, BOOL enable);
+
+/**
+ * @ingroup IxEthDB
+ *
+ * @fn IxEthDBStatus ixEthDBFeatureCapabilityGet(IxEthDBPortId portID, IxEthDBFeature *featureSet)
+ *
+ * @brief Retrieves the feature capability set for a port
+ *
+ * This function retrieves the feature capability set for a port or the common capabilities shared between all
+ * the ports, writing the feature capability set in a user specified location.
+ *
+ * The feature capability set will consist of a set formed by OR-ing one or more of the following values:
+ * - IX_ETH_DB_LEARNING - Learning feature; enables EthDB to learn MAC address (filtering) records, including 802.1Q enabled records
+ * - IX_ETH_DB_FILTERING - Filtering feature; enables EthDB to communicate with the NPEs for downloading filtering information in the NPEs; depends on the learning feature
+ * - IX_ETH_DB_VLAN_QOS - VLAN/QoS feature; enables EthDB to configure NPEs to operate in VLAN/QoS aware modes
+ * - IX_ETH_DB_FIREWALL - Firewall feature; enables EthDB to configure NPEs to operate in firewall mode, using white/black address lists
+ * - IX_ETH_DB_SPANNING_TREE_PROTOCOL - Spanning tree protocol feature; enables EthDB to configure the NPEs as STP nodes
+ * - IX_ETH_DB_WIFI_HEADER_CONVERSION - WiFi 802.3 to 802.11 header conversion feature; enables EthDB to handle WiFi conversion data
+ *
+ * Note that EthDB provides only the LEARNING feature for non-NPE ports.
+ *
+ * @param portID @ref IxEthDBPortId [in] - ID of the port to retrieve the capability set for
+ * (use IX_ETH_DB_ALL_PORTS to retrieve the common capabilities shared between all the ports)
+ * @param featureSet @ref IxEthDBFeature [out] - location where the capability set will be written to
+ *
+ * @retval IX_ETH_DB_SUCCESS operation completed successfully
+ * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier
+ * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized
+ * @retval IX_ETH_DB_INVALID_ARG invalid <i>featureSet</i> pointer
+ */
+IX_ETH_DB_PUBLIC
+IxEthDBStatus ixEthDBFeatureCapabilityGet(IxEthDBPortId portID, IxEthDBFeature *featureSet);
+
+/**
+ * @ingroup IxEthDB
+ *
+ * @fn IxEthDBStatus ixEthDBFeatureEnable(IxEthDBPortId portID, IxEthDBFeature feature, BOOL enabled)
+ *
+ * @brief Enables or disables one or more EthDB features
+ *
+ * Selects one or more features (see @ref ixEthDBFeatureCapabilityGet for a description of the supported
+ * features) to be enabled or disabled on the selected port (or all the ports).
+ *
+ * Note that some features are mutually incompatible:
+ * - IX_ETH_DB_FILTERING is incompatible with IX_ETH_DB_WIFI_HEADER_CONVERSION
+ *
+ * Also note that some features require other features to be enabled:
+ * - IX_ETH_DB_FILTERING requires IX_ETH_DB_LEARNING
+ *
+ * This function will either enable the entire selected feature set for the selected port (or all the ports),
+ * in which case it will return IX_ETH_DB_SUCCESS, or in case of error it will not enable any feature at all
+ * and return an appropriate error message.
+ *
+ * The following features are enabled by default (for ports with the respective capability),
+ * for compatibility reasons with previous versions of CSR:
+ * - IX_ETH_DB_LEARNING
+ * - IX_ETH_DB_FILTERING
+ *
+ * All other features are disabled by default and require manual enabling using ixEthDBFeatureEnable.
+ *
+ * <b>Default settings for VLAN, QoS, Firewall and WiFi header conversion features:</b>
+ *
+ * <i>VLAN</i>
+ *
+ * When the VLAN/QoS feature is enabled for a port for the first time the default VLAN behavior
+ * of the port is set to be as <b>permissive</b> (it will accept all the frames) and
+ * <b>non-interferential</b> (it will not change any frames) as possible:
+ * - the port VLAN ID (VID) is set to 0
+ * - the Ingress acceptable frame filter is set to accept all frames
+ * - the VLAN port membership is set to the complete VLAN range (0 - 4094)
+ * - the Ingress tagging mode is set to pass-through (will not change frames)
+ * - the Egress tagging mode is to send tagged frames in the entire VLAN range (0 - 4094)
+ *
+ * Note that further disabling and re-enabling the VLAN feature for a given port will not reset the port VLAN behavior
+ * to the settings listed above. Any VLAN settings made by the user are kept.
+ *
+ * <i>QoS</i>
+ *
+ * The following default priority mapping table will be used (as per IEEE 802.1Q and IEEE 802.1D):
+ *
+ * <table border="1"> <caption> QoS traffic classes </caption>
+ * <tr> <td> <b> QoS priority <td> <b> Default traffic class <td> <b> Traffic type </b>
+ * <tr> <td> 0 <td> 1 <td> Best effort, default class for unexpedited traffic
+ * <tr> <td> 1 <td> 0 <td> Background traffic
+ * <tr> <td> 2 <td> 0 <td> Spare bandwidth
+ * <tr> <td> 3 <td> 1 <td> Excellent effort
+ * <tr> <td> 4 <td> 2 <td> Controlled load
+ * <tr> <td> 5 <td> 2 <td> Video traffic
+ * <tr> <td> 6 <td> 3 <td> Voice traffic
+ * <tr> <td> 7 <td> 3 <td> Network control
+ * </table>
+ *
+ * <i> Firewall </i>
+ *
+ * The port firewall is configured by default in <b>black-list mode</b>, and the firewall address table is empty.
+ * This means the firewall will not filter any frames until the feature is configured and the firewall table is
+ * downloaded to the NPE.
+ *
+ * <i> Spanning Tree </i>
+ *
+ * The port is set to <b>STP unblocked mode</b>, therefore it will accept all frames until re-configured.
+ *
+ * <i> WiFi header conversion </i>
+ *
+ * The WiFi header conversion database is empty, therefore no actual header conversion will take place until this
+ * feature is configured and the conversion table downloaded to the NPE.
+ *
+ * @param portID @ref IxEthDBPortId [in] - ID of the port to enable or disable the features on (use IX_ETH_DB_ALL_PORTS for all the ports)
+ * @param feature @ref IxEthDBFeature [in] - feature or feature set to enable or disable
+ * @param enabled BOOL [in] - TRUE to enable the feature and FALSE to disable it
+ *
+ * @note Certain features, from a functional point of view, cannot be disabled as such at NPE level;
+ * when such features are set to <i>disabled</i> using the EthDB API they will be configured in such
+ * a way to determine a behavior equivalent to the feature being disabled. As well as this, disabled
+ * features cannot be configured or accessed via the EthDB API (except for getting their status).
+ *
+ * @retval IX_ETH_DB_SUCCESS operation completed successfully
+ * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier
+ * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized
+ * @retval IX_ETH_DB_NO_PERMISSION attempted to enable mutually exclusive features,
+ * or a feature that depends on another feature which is not present or enabled
+ * @retval IX_ETH_DB_FEATURE_UNAVAILABLE at least one of the features selected is unavailable
+ * @retval IX_FAIL unknown OS or NPE communication error
+ */
+IX_ETH_DB_PUBLIC
+IxEthDBStatus ixEthDBFeatureEnable(IxEthDBPortId portID, IxEthDBFeature feature, BOOL enabled);
+
+/**
+ * @ingroup IxEthDB
+ *
+ * @fn IxEthDBStatus ixEthDBFeatureStatusGet(IxEthDBPortId portID, IxEthDBFeature feature, BOOL *present, BOOL *enabled)
+ *
+ * @brief Retrieves the availability and status of a feature set
+ *
+ * This function returns the availability and status for a feature set.
+ * Note that if more than one feature is selected (e.g. IX_ETH_DB_LEARNING | IX_ETH_DB_FILTERING)
+ * the "present" and "enabled" return values will be set to TRUE only if all the features in the
+ * feature set are present and enabled (not only some).
+ *
+ * @param portID @ref IxEthDBPortId [in] - ID of the port
+ * @param feature @ref IxEthDBFeature [in] - identifier of the feature to retrieve the status for
+ * @param present BOOL [out] - location where a boolean flag indicating whether this feature is present will be written to
+ * @param enabled BOOL [out] - location where a boolean flag indicating whether this feature is enabled will be written to
+ *
+ * @retval IX_ETH_DB_SUCCESS operation completed successfully
+ * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier
+ * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized
+ * @retval IX_ETH_DB_INVALID_ARG either <i>present</i> or <i>enabled</i> pointer argument is invalid
+ */
+IX_ETH_DB_PUBLIC
+IxEthDBStatus ixEthDBFeatureStatusGet(IxEthDBPortId portID, IxEthDBFeature feature, BOOL *present, BOOL *enabled);
+
+/**
+ * @ingroup IxEthDB
+ *
+ * @fn IxEthDBStatus ixEthDBFeaturePropertyGet(IxEthDBPortId portID, IxEthDBFeature feature, IxEthDBProperty property, IxEthDBPropertyType *type, void *value)
+ *
+ * @brief Retrieves the value of a feature property
+ *
+ * The EthDB features usually contain feature-specific properties describing or
+ * controlling how the feature operates. While essential properties (e.g. the
+ * firewall operating mode) have their own API, secondary properties can be
+ * retrieved using this function.
+ *
+ * Properties can be read-only or read-write. ixEthDBFeaturePropertyGet operates with
+ * both types of features.
+ *
+ * Properties have types associated with them. A descriptor indicating the property
+ * type is returned in the <i>type</i> argument for convenience.
+ *
+ * The currently supported properties and their corresponding features are as follows:
+ *
+ * <table border="1"> <caption> Properties for IX_ETH_DB_VLAN_QOS </caption>
+ * <tr> <td> <b> Property identifier <td> <b> Property type <td> <b> Property value <td> <b> Read-Only </b>
+ * <tr> <td> IX_ETH_DB_QOS_TRAFFIC_CLASS_COUNT_PROPERTY <td> IX_ETH_DB_INTEGER_PROPERTY <td> number of internal traffic classes <td> Yes
+ * <tr> <td> IX_ETH_DB_QOS_TRAFFIC_CLASS_0_RX_QUEUE_PROPERTY <td> IX_ETH_DB_INTEGER_PROPERTY <td> queue assignment for traffic class 0 <td> Yes
+ * <tr> <td> IX_ETH_DB_QOS_TRAFFIC_CLASS_1_RX_QUEUE_PROPERTY <td> IX_ETH_DB_INTEGER_PROPERTY <td> queue assignment for traffic class 1 <td> Yes
+ * <tr> <td> IX_ETH_DB_QOS_TRAFFIC_CLASS_2_RX_QUEUE_PROPERTY <td> IX_ETH_DB_INTEGER_PROPERTY <td> queue assignment for traffic class 2 <td> Yes
+ * <tr> <td> IX_ETH_DB_QOS_TRAFFIC_CLASS_3_RX_QUEUE_PROPERTY <td> IX_ETH_DB_INTEGER_PROPERTY <td> queue assignment for traffic class 3 <td> Yes
+ * <tr> <td> IX_ETH_DB_QOS_TRAFFIC_CLASS_4_RX_QUEUE_PROPERTY <td> IX_ETH_DB_INTEGER_PROPERTY <td> queue assignment for traffic class 4 <td> Yes
+ * <tr> <td> IX_ETH_DB_QOS_TRAFFIC_CLASS_5_RX_QUEUE_PROPERTY <td> IX_ETH_DB_INTEGER_PROPERTY <td> queue assignment for traffic class 5 <td> Yes
+ * <tr> <td> IX_ETH_DB_QOS_TRAFFIC_CLASS_6_RX_QUEUE_PROPERTY <td> IX_ETH_DB_INTEGER_PROPERTY <td> queue assignment for traffic class 6 <td> Yes
+ * <tr> <td> IX_ETH_DB_QOS_TRAFFIC_CLASS_7_RX_QUEUE_PROPERTY <td> IX_ETH_DB_INTEGER_PROPERTY <td> queue assignment for traffic class 7 <td> Yes
+ * </table>
+ *
+ * @see ixEthDBFeaturePropertySet
+ *
+ * @param portID @ref IxEthDBPortId [in] - ID of the port
+ * @param feature @ref IxEthDBFeature [in] - EthDB feature for which the property is retrieved
+ * @param property @ref IxEthDBProperty [in] - property identifier
+ * @param type @ref IxEthDBPropertyType [out] - location where the property type will be stored
+ * @param value void [out] - location where the property value will be stored
+ *
+ * @retval IX_ETH_DB_SUCCESS operation completed successfully
+ * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier
+ * @retval IX_ETH_DB_INVALID_ARG invalid property identifier, <i>type</i> or <i>value</i> pointer arguments
+ * @retval IX_ETH_DB_FAIL incorrect property value or unknown error
+ */
+IX_ETH_DB_PUBLIC
+IxEthDBStatus ixEthDBFeaturePropertyGet(IxEthDBPortId portID, IxEthDBFeature feature, IxEthDBProperty property, IxEthDBPropertyType *type, void *value);
+
+/**
+ * @ingroup IxEthDB
+ *
+ * @fn IxEthDBStatus ixEthDBFeaturePropertySet(IxEthDBPortId portID, IxEthDBFeature feature, IxEthDBProperty property, void *value)
+ *
+ * @brief Sets the value of a feature property
+ *
+ * Unlike @ref ixEthDBFeaturePropertyGet, this function operates only with read-write properties
+ *
+ * The currently supported properties and their corresponding features are as follows:
+ *
+ * - IX_ETH_DB_QOS_QUEUE_CONFIGURATION_COMPLETE (for IX_ETH_DB_VLAN_QOS): freezes the availability of traffic classes
+ * to the number of traffic classes currently in use
+ *
+ * Note that this function creates deep copies of the property values; once the function is invoked the client
+ * can free or reuse the memory area containing the original property value.
+ *
+ * Copy behavior for different property types is defined as follows:
+ *
+ * - IX_ETH_DB_INTEGER_PROPERTY - 4 bytes are copied from the source location
+ * - IX_ETH_DB_STRING_PROPERTY - the source string will be copied up to the NULL '\0' string terminator, maximum of 255 characters
+ * - IX_ETH_DB_MAC_ADDR_PROPERTY - 6 bytes are copied from the source location
+ * - IX_ETH_DB_BOOL_PROPERTY - 4 bytes are copied from the source location; the only allowed values are TRUE (1L) and false (0L)
+ *
+ * @see ixEthDBFeaturePropertySet
+ *
+ * @warning IX_ETH_DB_QOS_QUEUE_CONFIGURATION_COMPLETE is provided for EthAcc internal use;
+ * do not attempt to set this property directly
+ *
+ * @param portID @ref IxEthDBPortId [in] - ID of the port
+ * @param feature @ref IxEthDBFeature [in] - EthDB feature for which the property is set
+ * @param property @ref IxEthDBProperty [in] - property identifier
+ * @param value void [in] - location where the property value is to be copied from
+ *
+ * @retval IX_ETH_DB_SUCCESS operation completed successfully
+ * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier
+ * @retval IX_ETH_DB_INVALID_ARG invalid property identifier, <i>value</i> pointer, or invalid property value
+ */
+IX_ETH_DB_PUBLIC
+IxEthDBStatus ixEthDBFeaturePropertySet(IxEthDBPortId portID, IxEthDBFeature feature, IxEthDBProperty property, void *value);
+
+/**
+ * @ingroup IxEthDB
+ *
+ * @fn IxEthDBStatus ixEthDBDatabaseClear(IxEthDBPortId portID, IxEthDBRecordType recordType)
+ *
+ * @brief Deletes a set of record types from the Ethernet Database
+ *
+ * This function deletes all the records of certain types (specified in the recordType filter)
+ * associated with a port. Additionally, the IX_ETH_DB_ALL_PORTS value can be used as port ID
+ * to indicate that the specified record types should be deleted for all the ports.
+ *
+ * The record type filter can be an ORed combination of the following types:
+ *
+ * <caption> Record types </caption>
+ * - IX_ETH_DB_FILTERING_RECORD <table><caption> Filtering record </caption>
+ * <tr><td> MAC address <td> static/dynamic type <td> age </tr>
+ * </table>
+ *
+ * - IX_ETH_DB_FILTERING_VLAN_RECORD <table><caption> VLAN-enabled filtering record </caption>
+ * <tr><td> MAC address <td> static/dynamic type <td> age <td> 802.1Q tag </tr>
+ * </table>
+ *
+ * - IX_ETH_DB_WIFI_RECORD <table><caption> WiFi header conversion record </caption>
+ * <tr><td> MAC address <td> optional gateway MAC address <td> </tr>
+ * </table>
+ *
+ * - IX_ETH_DB_FIREWALL_RECORD <table><caption> Firewall record </caption>
+ * <tr><td> MAC address </tr>
+ * </table>
+ * - IX_ETH_DB_ALL_RECORD_TYPES
+ *
+ * Any combination of the above types is valid e.g.
+ *
+ * (IX_ETH_DB_FILTERING_RECORD | IX_ETH_DB_FILTERING_VLAN_RECORD | IX_ETH_DB_FIREWALL_RECORD),
+ *
+ * although some might be redundant (it is not an error to do so) e.g.
+ *
+ * (IX_ETH_DB_FILTERING_RECORD | IX_ETH_DB_ALL_RECORD_TYPES)
+ *
+ * @param portID @ref IxEthDBPortId [in] - ID of the port
+ * @param recordType @ref IxEthDBRecordType [in] - record type filter
+ *
+ * @retval IX_ETH_DB_SUCCESS operation completed successfully
+ * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier
+ * @retval IX_ETH_DB_INVALID_ARG invalid <i>recordType</i> filter
+ *
+ * @note If the record type filter contains any unrecognized value (hence the
+ * IX_ETH_DB_INVALID_ARG error value is returned) no actual records will be deleted.
+ */
+IX_ETH_DB_PUBLIC
+IxEthDBStatus ixEthDBDatabaseClear(IxEthDBPortId portID, IxEthDBRecordType recordType);
+
+/**
+ * @ingroup IxEthDB
+ *
+ * @fn IxEthDBStatus ixEthDBWiFiStationEntryAdd(IxEthDBPortId portID, IxEthDBMacAddr *macAddr)
+ *
+ * @brief Adds an "Access Point to Station" record to the database, for 802.3 => 802.11 frame
+ * header conversion
+ *
+ * Frame header conversion is controlled by the set of MAC addresses
+ * added using @ref ixEthDBWiFiStationEntryAdd and @ref ixEthDBWiFiAccessPointEntryAdd.
+ * Conversion arguments are added using @ref ixEthDBWiFiFrameControlSet,
+ * @ref ixEthDBWiFiDurationIDSet and @ref ixEthDBWiFiBBSIDSet.
+ *
+ * Note that adding the same MAC address twice will not return an error
+ * (but will not accomplish anything either), while re-adding a record previously added
+ * as an "Access Point to Access Point" will migrate the record to the "Access Point
+ * to Station" type.
+ *
+ * @param portID @ref IxEthDBPortId [in] - ID of the port
+ * @param macAddr @ref IxEthDBMacAddr [in] - MAC address to add
+ *
+ * @retval IX_ETH_DB_SUCCESS operation completed successfully
+ * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier
+ * @retval IX_ETH_DB_INVALID_ARG macAddr is an invalid pointer
+ * @retval IX_ETH_DB_FEATURE_UNAVAILABLE WiFi feature not enabled
+ * @retval IX_ETH_DB_INVALID_ARG invalid <i>macAddr</i> pointer argument
+ * @retval IX_ETH_DB_NOMEM maximum number of records reached
+ * @retval IX_ETH_DB_BUSY lock condition or transaction in progress, try again later
+ */
+IX_ETH_DB_PUBLIC
+IxEthDBStatus ixEthDBWiFiStationEntryAdd(IxEthDBPortId portID, IxEthDBMacAddr *macAddr);
+
+/**
+ * @ingroup IxEthDB
+ *
+ * @fn IxEthDBStatus ixEthDBWiFiAccessPointEntryAdd(IxEthDBPortId portID, IxEthDBMacAddr *macAddr, IxEthDBMacAddr *gatewayMacAddr)
+ *
+ * @brief Adds an "Access Point to Access Point" record to the database
+ *
+ * @see ixEthDBWiFiStationEntryAdd
+ *
+ * Note that adding the same MAC address twice will simply overwrite the previously
+ * defined gateway MAC address value in the same record, if the record was previously of the
+ * "Access Point to Access Point" type.
+ *
+ * Re-adding a MAC address as "Access Point to Access Point", which was previously added as
+ * "Access Point to Station" will migrate the record type to "Access Point to Access Point" and
+ * record the gateway MAC address.
+ *
+ * @param portID @ref IxEthDBPortId [in] - ID of the port
+ * @param macAddr @ref IxEthDBMacAddr [in] - MAC address to add
+ * @param gatewayMacAddr @ref IxEthDBMacAddr [in] - MAC address of the gateway Access Point
+ *
+ * @retval IX_ETH_DB_SUCCESS operation completed successfully
+ * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier
+ * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized
+ * @retval IX_ETH_DB_INVALID_ARG macAddr is an invalid pointer
+ * @retval IX_ETH_DB_FEATURE_UNAVAILABLE WiFi feature not enabled
+ * @retval IX_ETH_DB_INVALID_ARG invalid <i>macAddr</i> or <i>gatewayMacAddr</i> pointer argument
+ * @retval IX_ETH_DB_NOMEM maximum number of records reached
+ * @retval IX_ETH_DB_BUSY lock condition or transaction in progress, try again later
+ */
+IX_ETH_DB_PUBLIC
+IxEthDBStatus ixEthDBWiFiAccessPointEntryAdd(IxEthDBPortId portID, IxEthDBMacAddr *macAddr, IxEthDBMacAddr *gatewayMacAddr);
+
+/**
+ * @ingroup IxEthDB
+ *
+ * @fn IxEthDBStatus ixEthDBWiFiEntryRemove(IxEthDBPortId portID, IxEthDBMacAddr *macAddr)
+ *
+ * @brief Removes a WiFi station record
+ *
+ * This function removes both types of WiFi records ("Access Point to Station" and
+ * "Access Point to Access Point").
+ *
+ * @param portID @ref IxEthDBPortId [in] - ID of the port
+ * @param macAddr @ref IxEthDBMacAddr [in] - MAC address to remove
+ *
+ * @retval IX_ETH_DB_SUCCESS operation completed successfully
+ * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier
+ * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized
+ * @retval IX_ETH_DB_INVALID_ARG invalid <i>macAddr</i> pointer argument
+ * @retval IX_ETH_DB_NO_SUCH_ADDR specified address was not found in the database
+ * @retval IX_ETH_DB_FEATURE_UNAVAILABLE WiFi feature not enabled
+ * @retval IX_ETH_DB_BUSY lock condition or transaction in progress, try again later
+ */
+IX_ETH_DB_PUBLIC
+IxEthDBStatus ixEthDBWiFiEntryRemove(IxEthDBPortId portID, IxEthDBMacAddr *macAddr);
+
+/**
+ * @ingroup IxEthDB
+ *
+ * @fn IxEthDBStatus ixEthDBWiFiConversionTableDownload(IxEthDBPortId portID)
+ *
+ * @brief Downloads the MAC address table for 802.3 => 802.11 frame header
+ * conversion to the NPE
+ *
+ * Note that the frame conversion MAC address table must be individually downloaded
+ * to each NPE for which the frame header conversion feature is enabled (i.e. it
+ * is not possible to specify IX_ETH_DB_ALL_PORTS).
+ *
+ * @param portID @ref IxEthDBPortId [in] - ID of the port
+ *
+ * @retval IX_ETH_DB_SUCCESS operation completed successfully
+ * @retval IX_ETH_DB_PORT_UNINITIALIZED port not initialized
+ * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier
+ * @retval IX_ETH_DB_FEATURE_UNAVAILABLE WiFi feature not enabled
+ * @retval IX_ETH_DB_FAIL unknown OS or NPE communication error
+ */
+IX_ETH_DB_PUBLIC
+IxEthDBStatus ixEthDBWiFiConversionTableDownload(IxEthDBPortId portID);
+
+/**
+ * @ingroup IxEthDB
+ *
+ * @fn IxEthDBStatus ixEthDBWiFiFrameControlSet(IxEthDBPortId portID, UINT16 frameControl)
+ *
+ * @brief Sets the GlobalFrameControl field
+ *
+ * The GlobalFrameControl field is a 2-byte value inserted in the <i>Frame Control</i>
+ * field for all 802.3 to 802.11 frame header conversions
+ *
+ * @param portID @ref IxEthDBPortId [in] - ID of the port
+ * @param frameControl UINT16 [in] - GlobalFrameControl value
+ *
+ * @retval IX_ETH_DB_SUCCESS operation completed successfully
+ * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier
+ * @retval IX_ETH_DB_PORT_UNINITIALIZED port not initialized
+ * @retval IX_ETH_DB_FEATURE_UNAVAILABLE WiFi feature not enabled
+ * @retval IX_ETH_DB_FAIL unknown OS or NPE communication error
+ */
+IX_ETH_DB_PUBLIC
+IxEthDBStatus ixEthDBWiFiFrameControlSet(IxEthDBPortId portID, UINT16 frameControl);
+
+/**
+ * @ingroup IxEthDB
+ *
+ * @fn IxEthDBStatus ixEthDBWiFiDurationIDSet(IxEthDBPortId portID, UINT16 durationID)
+ *
+ * @brief Sets the GlobalDurationID field
+ *
+ * The GlobalDurationID field is a 2-byte value inserted in the <i>Duration/ID</i>
+ * field for all 802.3 to 802.11 frame header conversions
+ *
+ * @param portID @ref IxEthDBPortId [in] - ID of the port
+ * @param durationID UINT16 [in] - GlobalDurationID field
+ *
+ * @retval IX_ETH_DB_SUCCESS operation completed successfully
+ * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier
+ * @retval IX_ETH_DB_PORT_UNINITIALIZED port not initialized
+ * @retval IX_ETH_DB_FEATURE_UNAVAILABLE WiFi feature not enabled
+ * @retval IX_ETH_DB_FAIL unknown OS or NPE communication error
+ */
+IX_ETH_DB_PUBLIC
+IxEthDBStatus ixEthDBWiFiDurationIDSet(IxEthDBPortId portID, UINT16 durationID);
+
+/**
+ * @ingroup IxEthDB
+ *
+ * @fn IxEthDBStatus ixEthDBWiFiBBSIDSet(IxEthDBPortId portID, IxEthDBMacAddr *bbsid)
+ *
+ * @brief Sets the BBSID field
+ *
+ * The BBSID field is a 6-byte value which
+ * identifies the infrastructure of the service set managed
+ * by the Access Point having the IXP400 as its processor. The value
+ * is written in the <i>BBSID</i> field of the 802.11 frame header.
+ * The BBSID value is the MAC address of the Access Point.
+ *
+ * @param portID @ref IxEthDBPortId [in] - ID of the port
+ * @param bbsid @ref IxEthDBMacAddr [in] - pointer to 6 bytes containing the BSSID
+ *
+ * @retval IX_ETH_DB_SUCCESS operation completed successfully
+ * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier
+ * @retval IX_ETH_DB_PORT_UNINITIALIZED port not initialized
+ * @retval IX_ETH_DB_INVALID_ARG invalid <i>bbsid</i> pointer argument
+ * @retval IX_ETH_DB_FEATURE_UNAVAILABLE WiFi feature not enabled
+ * @retval IX_ETH_DB_FAIL unknown OS or NPE communication error
+ */
+IX_ETH_DB_PUBLIC
+IxEthDBStatus ixEthDBWiFiBBSIDSet(IxEthDBPortId portID, IxEthDBMacAddr *bbsid);
+
+/**
+ * @ingroup IxEthDB
+ *
+ * @fn IxEthDBStatus ixEthDBSpanningTreeBlockingStateSet(IxEthDBPortId portID, BOOL blocked)
+ *
+ * @brief Sets the STP blocked/unblocked state for a port
+ *
+ * @param portID @ref IxEthDBPortId [in] - ID of the port
+ * @param blocked BOOL [in] - TRUE to set the port as STP blocked, FALSE to set it as unblocked
+ *
+ * @retval IX_ETH_DB_SUCCESS operation completed successfully
+ * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier
+ * @retval IX_ETH_DB_PORT_UNINITIALIZED port not initialized
+ * @retval IX_ETH_DB_FEATURE_UNAVAILABLE Spanning Tree Protocol feature not enabled
+ * @retval IX_ETH_DB_FAIL unknown OS or NPE communication error
+ */
+IX_ETH_DB_PUBLIC
+IxEthDBStatus ixEthDBSpanningTreeBlockingStateSet(IxEthDBPortId portID, BOOL blocked);
+
+/**
+ * @ingroup IxEthDB
+ *
+ * @fn IxEthDBStatus ixEthDBSpanningTreeBlockingStateGet(IxEthDBPortId portID, BOOL *blocked)
+ *
+ * @brief Retrieves the STP blocked/unblocked state for a port
+ *
+ * @param portID @ref IxEthDBPortId [in] - ID of the port
+ * @param blocked BOOL * [in] - set to TRUE if the port is STP blocked, FALSE otherwise
+ *
+ * @retval IX_ETH_DB_SUCCESS operation completed successfully
+ * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier
+ * @retval IX_ETH_DB_PORT_UNINITIALIZED port not initialized
+ * @retval IX_ETH_DB_INVALID_ARG invalid <i>blocked</i> pointer argument
+ * @retval IX_ETH_DB_FEATURE_UNAVAILABLE Spanning Tree Protocol feature not enabled
+ */
+IX_ETH_DB_PUBLIC
+IxEthDBStatus ixEthDBSpanningTreeBlockingStateGet(IxEthDBPortId portID, BOOL *blocked);
+
+/**
+ * @ingroup IxEthDB
+ *
+ * @fn IxEthDBStatus ixEthDBFirewallModeSet(IxEthDBPortId portID, IxEthDBFirewallMode mode)
+ *
+ * @brief Sets the firewall mode to use white or black listing
+ *
+ * When enabled, the NPE MAC address based firewall support operates in two modes:
+ *
+ * - white-list mode (MAC address based admission)
+ * - <i>mode</i> set to IX_ETH_DB_FIREWALL_WHITE_LIST
+ * - only packets originating from MAC addresses contained in the firewall address list
+ * are allowed on the Rx path
+ * - black-list mode (MAC address based blocking)
+ * - <i>mode</i> set to IX_ETH_DB_FIREWALL_BLACK_LIST
+ * - packets originating from MAC addresses contained in the firewall address list
+ * are discarded
+ *
+ * @param portID @ref IxEthDBPortId [in] - ID of the port
+ * @param mode @ref IxEthDBFirewallMode [in] - firewall mode (IX_ETH_DB_FIREWALL_WHITE_LIST or IX_ETH_DB_FIREWALL_BLACK_LIST)
+ *
+ * @note by default the firewall operates in black-list mode with an empty address
+ * list, hence it doesn't filter any packets
+ *
+ * @retval IX_ETH_DB_SUCCESS operation completed successfully
+ * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier
+ * @retval IX_ETH_DB_PORT_UNINITIALIZED port not initialized
+ * @retval IX_ETH_DB_FEATURE_UNAVAILABLE Firewall feature not enabled
+ * @retval IX_ETH_DB_INVALID_ARGUMENT <i>mode</i> argument is not a valid firewall configuration mode
+ * @retval IX_ETH_DB_FAIL unknown OS or NPE communication error
+*/
+IX_ETH_DB_PUBLIC
+IxEthDBStatus ixEthDBFirewallModeSet(IxEthDBPortId portID, IxEthDBFirewallMode mode);
+
+/**
+ * @ingroup IxEthDB
+ *
+ * @fn ixEthDBFirewallInvalidAddressFilterEnable(IxEthDBPortId portID, BOOL enable)
+ *
+ * @brief Enables or disables invalid MAC address filtering
+ *
+ * According to IEEE802 it is illegal for a source address to be a multicast
+ * or broadcast address. If this feature is enabled the NPE inspects the source
+ * MAC addresses of incoming frames and discards them if invalid addresses are
+ * detected.
+ *
+ * By default this service is enabled, if the firewall feature is supported by the
+ * NPE image.
+ *
+ * @param portID ID of the port
+ * @param enable TRUE to enable invalid MAC address filtering and FALSE to disable it
+ *
+ * @retval IX_ETH_DB_SUCCESS operation completed successfully
+ * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier
+ * @retval IX_ETH_DB_PORT_UNINITIALIZED port not initialized
+ * @retval IX_ETH_DB_FEATURE_UNAVAILABLE Firewall feature not enabled
+ * @retval IX_ETH_DB_FAIL unknown OS or NPE communication error
+ */
+IX_ETH_DB_PUBLIC
+IxEthDBStatus ixEthDBFirewallInvalidAddressFilterEnable(IxEthDBPortId portID, BOOL enable);
+
+/**
+ * @ingroup IxEthDB
+ *
+ * @fn IxEthDBStatus ixEthDBFirewallEntryAdd(IxEthDBPortId portID, IxEthDBMacAddr *macAddr)
+ *
+ * @brief Adds a MAC address to the firewall address list
+ *
+ * Note that adding the same MAC address twice will not return an error
+ * but will not actually accomplish anything.
+ *
+ * The firewall MAC address list has a limited number of entries; once
+ * the maximum number of entries has been reached this function will failed
+ * to add more addresses, returning IX_ETH_DB_NOMEM.
+ *
+ * @param portID @ref IxEthDBPortId [in] - ID of the port
+ * @param macAddr @ref IxEthDBMacAddr [in] - MAC address to be added
+ *
+ * @retval IX_ETH_DB_SUCCESS operation completed successfully
+ * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier
+ * @retval IX_ETH_DB_PORT_UNINITIALIZED port not initialized
+ * @retval IX_ETH_DB_INVALID_ARG invalid <i>macAddr</i> pointer argument
+ * @retval IX_ETH_DB_NOMEM maximum number of records reached
+ * @retval IX_ETH_DB_BUSY lock condition or transaction in progress, try again later
+ * @retval IX_ETH_DB_FEATURE_UNAVAILABLE Firewall feature not enabled
+ */
+IX_ETH_DB_PUBLIC
+IxEthDBStatus ixEthDBFirewallEntryAdd(IxEthDBPortId portID, IxEthDBMacAddr *macAddr);
+
+/**
+ * @ingroup IxEthDB
+ *
+ * @fn IxEthDBStatus ixEthDBFirewallEntryRemove(IxEthDBPortId portID, IxEthDBMacAddr *macAddr)
+ *
+ * @brief Removes a MAC address from the firewall address list
+ *
+ * @param portID @ref IxEthDBPortId [in] - ID of the port
+ * @param macAddr @ref IxEthDBMacAddr [in] - MAC address to be removed
+ *
+ * @retval IX_ETH_DB_SUCCESS operation completed successfully
+ * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier
+ * @retval IX_ETH_DB_PORT_UNINITIALIZED port not initialized
+ * @retval IX_ETH_DB_INVALID_ARG invalid <i>macAddr</i> pointer argument
+ * @retval IX_ETH_DB_NO_SUCH_ADDR address not found
+ * @retval IX_ETH_DB_FEATURE_UNAVAILABLE Firewall feature not enabled
+ */
+IX_ETH_DB_PUBLIC
+IxEthDBStatus ixEthDBFirewallEntryRemove(IxEthDBPortId portID, IxEthDBMacAddr *macAddr);
+
+/**
+ * @ingroup IxEthDB
+ *
+ * @fn IxEthDBStatus ixEthDBFirewallTableDownload(IxEthDBPortId portID)
+ *
+ * @brief Downloads the MAC firewall table to a port
+ *
+ * @param portID ID of the port
+ *
+ * @retval IX_ETH_DB_SUCCESS operation completed successfully
+ * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier
+ * @retval IX_ETH_DB_PORT_UNINITIALIZED port not initialized
+ * @retval IX_ETH_DB_FEATURE_UNAVAILABLE Firewall feature not enabled
+ * @retval IX_ETH_DB_FAIL unknown OS or NPE communication error
+ */
+IX_ETH_DB_PUBLIC
+IxEthDBStatus ixEthDBFirewallTableDownload(IxEthDBPortId portID);
+
+/**
+ * @ingroup IxEthDB
+ *
+ * @fn IxEthDBStatus ixEthDBUserFieldSet(IxEthDBRecordType recordType, IxEthDBMacAddr *macAddr, IxEthDBPortId portID, IxEthDBVlanId vlanID, void *field)
+ *
+ * @brief Adds a user-defined field to a database record
+ *
+ * This function associates a user-defined field to a database record.
+ * The user-defined field is passed as a <i>(void *)</i> parameter, hence it can be used
+ * for any purpose (such as identifying a structure). Retrieving the user-defined field from
+ * a record is done using @ref ixEthDBUserFieldGet. Note that EthDB never uses the user-defined
+ * field for any internal operation and it is not aware of the significance of its contents. The
+ * field is only stored as a pointer.
+ *
+ * The database record is identified using a combination of the given parameters, depending on the record type.
+ * All the record types require the record MAC address.
+ *
+ * - IX_ETH_DB_FILTERING_RECORD requires only the MAC address
+ * - IX_ETH_DB_VLAN_FILTERING_RECORD requires the MAC address and the VLAN ID
+ * - IX_ETH_DB_WIFI_RECORD requires the MAC address and the portID
+ * - IX_ETH_DB_FIREWALL_RECORD requires the MAC address and the portID
+ *
+ * Please note that if a parameter is not required it is completely ignored (it does not undergo parameter checking).
+ * The user-defined field can be cleared using a <b>NULL</b> <i>field</i> parameter.
+ *
+ * @param recordType @ref IxEthDBRecordType [in] - type of record (can be IX_ETH_DB_FILTERING_RECORD,
+ * IX_ETH_DB_FILTERING_VLAN_RECORD, IX_ETH_DB_WIFI_RECORD or IX_ETH_DB_FIREWALL_RECORD)
+ * @param portID @ref IxEthDBPortId [in] - ID of the port (required only for WIFI and FIREWALL records)
+ * @param macAddr @ref IxEthDBMacAddr * [in] - MAC address of the record
+ * @param vlanID @ref IxEthDBVlanId [in] - VLAN ID of the record (required only for FILTERING_VLAN records)
+ * @param field void * [in] - user defined field
+ *
+ * @retval IX_ETH_DB_SUCCESS operation completed successfully
+ * @retval IX_ETH_DB_INVALID_PORT portID was required but it is not a valid port identifier
+ * @retval IX_ETH_DB_INVALID_ARG invalid <i>macAddr</i> pointer argument
+ * @retval IX_ETH_DB_NO_SUCH_ADDR record not found
+ */
+IX_ETH_DB_PUBLIC
+IxEthDBStatus ixEthDBUserFieldSet(IxEthDBRecordType recordType, IxEthDBMacAddr *macAddr, IxEthDBPortId portID, IxEthDBVlanId vlanID, void *field);
+
+/**
+ * @ingroup IxEthDB
+ *
+ * @fn IxEthDBStatus ixEthDBUserFieldGet(IxEthDBRecordType recordType, IxEthDBMacAddr *macAddr, IxEthDBPortId portID, IxEthDBVlanId vlanID, void **field)
+ *
+ * @brief Retrieves a user-defined field from a database record
+ *
+ * The database record is identified using a combination of the given parameters, depending on the record type.
+ * All the record types require the record MAC address.
+ *
+ * - IX_ETH_DB_FILTERING_RECORD requires only the MAC address
+ * - IX_ETH_DB_VLAN_FILTERING_RECORD requires the MAC address and the VLAN ID
+ * - IX_ETH_DB_WIFI_RECORD requires the MAC address and the portID
+ * - IX_ETH_DB_FIREWALL_RECORD requires the MAC address and the portID
+ *
+ * Please note that if a parameter is not required it is completely ignored (it does not undergo parameter checking).
+ *
+ * If no user-defined field was registered with the specified record then <b>NULL</b> will be written
+ * at the location specified by <i>field</i>.
+ *
+ * @param recordType type of record (can be IX_ETH_DB_FILTERING_RECORD, IX_ETH_DB_FILTERING_VLAN_RECORD, IX_ETH_DB_WIFI_RECORD
+ * or IX_ETH_DB_FIREWALL_RECORD)
+ * @param portID ID of the port (required only for WIFI and FIREWALL records)
+ * @param macAddr MAC address of the record
+ * @param vlanID VLAN ID of the record (required only for FILTERING_VLAN records)
+ * @param field location to write the user defined field into
+ *
+ * @retval IX_ETH_DB_SUCCESS operation completed successfully
+ * @retval IX_ETH_DB_INVALID_PORT portID was required but it is not a valid port identifier
+ * @retval IX_ETH_DB_INVALID_ARG invalid <i>macAddr</i> or <i>field</i> pointer arguments
+ * @retval IX_ETH_DB_NO_SUCH_ADDR record not found
+ */
+IX_ETH_DB_PUBLIC
+IxEthDBStatus ixEthDBUserFieldGet(IxEthDBRecordType recordType, IxEthDBMacAddr *macAddr, IxEthDBPortId portId, IxEthDBVlanId vlanID, void **field);
+
+/**
+ * @}
+ */
+
+#endif /* IxEthDB_H */