blob: 1cda1e34ebf78c1d9ac2c1663ba1892a7c4aed86 [file] [log] [blame]
/*
* Copyright 2004 Freescale Semiconductor.
* (C) Copyright 2003 Motorola Inc.
* Xianghua Xiao, (X.Xiao@motorola.com)
*
* (C) Copyright 2000
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <ppc_asm.tmpl>
#include <asm/processor.h>
DECLARE_GLOBAL_DATA_PTR;
/* --------------------------------------------------------------- */
void get_sys_info (sys_info_t * sysInfo)
{
volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
uint plat_ratio,e500_ratio,half_freqSystemBus;
plat_ratio = (gur->porpllsr) & 0x0000003e;
plat_ratio >>= 1;
sysInfo->freqSystemBus = plat_ratio * CONFIG_SYS_CLK_FREQ;
e500_ratio = (gur->porpllsr) & 0x003f0000;
e500_ratio >>= 16;
/* Divide before multiply to avoid integer
* overflow for processor speeds above 2GHz */
half_freqSystemBus = sysInfo->freqSystemBus/2;
sysInfo->freqProcessor = e500_ratio*half_freqSystemBus;
/* Note: freqDDRBus is the MCLK frequency, not the data rate. */
sysInfo->freqDDRBus = sysInfo->freqSystemBus;
#ifdef CONFIG_DDR_CLK_FREQ
{
u32 ddr_ratio = ((gur->porpllsr) & 0x00003e00) >> 9;
if (ddr_ratio != 0x7)
sysInfo->freqDDRBus = ddr_ratio * CONFIG_DDR_CLK_FREQ;
}
#endif
}
int get_clocks (void)
{
sys_info_t sys_info;
#ifdef CONFIG_MPC8544
volatile ccsr_gur_t *gur = (void *) CFG_MPC85xx_GUTS_ADDR;
#endif
#if defined(CONFIG_CPM2)
volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CFG_MPC85xx_CPM_ADDR;
uint sccr, dfbrg;
/* set VCO = 4 * BRG */
cpm->im_cpm_intctl.sccr &= 0xfffffffc;
sccr = cpm->im_cpm_intctl.sccr;
dfbrg = (sccr & SCCR_DFBRG_MSK) >> SCCR_DFBRG_SHIFT;
#endif
get_sys_info (&sys_info);
gd->cpu_clk = sys_info.freqProcessor;
gd->bus_clk = sys_info.freqSystemBus;
gd->mem_clk = sys_info.freqDDRBus;
/*
* The base clock for I2C depends on the actual SOC. Unfortunately,
* there is no pattern that can be used to determine the frequency, so
* the only choice is to look up the actual SOC number and use the value
* for that SOC. This information is taken from application note
* AN2919.
*/
#if defined(CONFIG_MPC8540) || defined(CONFIG_MPC8541) || \
defined(CONFIG_MPC8560) || defined(CONFIG_MPC8555)
gd->i2c1_clk = sys_info.freqSystemBus;
#elif defined(CONFIG_MPC8544)
/*
* On the 8544, the I2C clock is the same as the SEC clock. This can be
* either CCB/2 or CCB/3, depending on the value of cfg_sec_freq. See
* 4.4.3.3 of the 8544 RM. Note that this might actually work for all
* 85xx, but only the 8544 has cfg_sec_freq, so it's unknown if the
* PORDEVSR2_SEC_CFG bit is 0 on all 85xx boards that are not an 8544.
*/
if (gur->pordevsr2 & MPC85xx_PORDEVSR2_SEC_CFG)
gd->i2c1_clk = sys_info.freqSystemBus / 3;
else
gd->i2c1_clk = sys_info.freqSystemBus / 2;
#else
/* Most 85xx SOCs use CCB/2, so this is the default behavior. */
gd->i2c1_clk = sys_info.freqSystemBus / 2;
#endif
gd->i2c2_clk = gd->i2c1_clk;
#if defined(CONFIG_MPC8536)
gd->sdhc_clk = gd->bus_clk / 2;
#endif
#if defined(CONFIG_CPM2)
gd->vco_out = 2*sys_info.freqSystemBus;
gd->cpm_clk = gd->vco_out / 2;
gd->scc_clk = gd->vco_out / 4;
gd->brg_clk = gd->vco_out / (1 << (2 * (dfbrg + 1)));
#endif
if(gd->cpu_clk != 0) return (0);
else return (1);
}
/********************************************
* get_bus_freq
* return system bus freq in Hz
*********************************************/
ulong get_bus_freq (ulong dummy)
{
return gd->bus_clk;
}
/********************************************
* get_ddr_freq
* return ddr bus freq in Hz
*********************************************/
ulong get_ddr_freq (ulong dummy)
{
return gd->mem_clk;
}