arm: dts: k3: Add phy specific properties to SD card node
With changes in the driver requiring phy related properties,
add the same for the SD card node to prevent breaking boot with
the driver update.
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
diff --git a/arch/arm/dts/k3-am654-base-board-u-boot.dtsi b/arch/arm/dts/k3-am654-base-board-u-boot.dtsi
index e135cfb..71d6c31 100644
--- a/arch/arm/dts/k3-am654-base-board-u-boot.dtsi
+++ b/arch/arm/dts/k3-am654-base-board-u-boot.dtsi
@@ -36,6 +36,8 @@
clocks = <&k3_clks 48 1>;
power-domains = <&k3_pds 48>;
max-frequency = <25000000>;
+ ti,otap-del-sel = <0x2>;
+ ti,trm-icp = <0x8>;
};
};
@@ -328,6 +330,7 @@
pinctrl-names = "default";
pinctrl-0 = <&main_mmc1_pins_default>;
sdhci-caps-mask = <0x7 0x0>;
+ ti,driver-strength-ohm = <50>;
};
&mcu_cpsw {
diff --git a/arch/arm/dts/k3-am654-r5-base-board.dts b/arch/arm/dts/k3-am654-r5-base-board.dts
index 1ca4757..8deda32 100644
--- a/arch/arm/dts/k3-am654-r5-base-board.dts
+++ b/arch/arm/dts/k3-am654-r5-base-board.dts
@@ -174,4 +174,5 @@
clock-names = "clk_xin";
clocks = <&clk_200mhz>;
/delete-property/ power-domains;
+ ti,driver-strength-ohm = <50>;
};