arm: Remove imx27lite, imx27_litekit and magnesium boards
These boards have not been converted to generic board by the deadline.
Remove them.
Signed-off-by: Simon Glass <sjg@chromium.org>
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 277339f..6daa969 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -152,14 +152,6 @@
select CPU_ARM926EJS
select SUPPORT_SPL
-config TARGET_IMX27LITE
- bool "Support imx27lite"
- select CPU_ARM926EJS
-
-config TARGET_MAGNESIUM
- bool "Support magnesium"
- select CPU_ARM926EJS
-
config TARGET_APX4DEVKIT
bool "Support apx4devkit"
select CPU_ARM926EJS
@@ -831,7 +823,6 @@
source "board/isee/igep0033/Kconfig"
source "board/jornada/Kconfig"
source "board/karo/tx25/Kconfig"
-source "board/logicpd/imx27lite/Kconfig"
source "board/logicpd/imx31_litekit/Kconfig"
source "board/maxbcm/Kconfig"
source "board/mpl/vcma9/Kconfig"
diff --git a/board/logicpd/imx27lite/Kconfig b/board/logicpd/imx27lite/Kconfig
deleted file mode 100644
index c7de2e3..0000000
--- a/board/logicpd/imx27lite/Kconfig
+++ /dev/null
@@ -1,31 +0,0 @@
-if TARGET_IMX27LITE
-
-config SYS_BOARD
- default "imx27lite"
-
-config SYS_VENDOR
- default "logicpd"
-
-config SYS_SOC
- default "mx27"
-
-config SYS_CONFIG_NAME
- default "imx27lite"
-
-endif
-
-if TARGET_MAGNESIUM
-
-config SYS_BOARD
- default "imx27lite"
-
-config SYS_VENDOR
- default "logicpd"
-
-config SYS_SOC
- default "mx27"
-
-config SYS_CONFIG_NAME
- default "magnesium"
-
-endif
diff --git a/board/logicpd/imx27lite/MAINTAINERS b/board/logicpd/imx27lite/MAINTAINERS
deleted file mode 100644
index a7b22ac..0000000
--- a/board/logicpd/imx27lite/MAINTAINERS
+++ /dev/null
@@ -1,12 +0,0 @@
-IMX27LITE BOARD
-M: Wolfgang Denk <wd@denx.de>
-S: Maintained
-F: board/logicpd/imx27lite/
-F: include/configs/imx27lite.h
-F: configs/imx27lite_defconfig
-
-MAGNESIUM BOARD
-M: Heiko Schocher <hs@denx.de>
-S: Maintained
-F: include/configs/magnesium.h
-F: configs/magnesium_defconfig
diff --git a/board/logicpd/imx27lite/Makefile b/board/logicpd/imx27lite/Makefile
deleted file mode 100644
index 50a3da6..0000000
--- a/board/logicpd/imx27lite/Makefile
+++ /dev/null
@@ -1,9 +0,0 @@
-#
-# (C) Copyright 2000-2004
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y := imx27lite.o
-obj-y += lowlevel_init.o
diff --git a/board/logicpd/imx27lite/imx27lite.c b/board/logicpd/imx27lite/imx27lite.c
deleted file mode 100644
index 07b07a0..0000000
--- a/board/logicpd/imx27lite/imx27lite.c
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- * Copyright (C) 2007 Sascha Hauer, Pengutronix
- * Copyright (C) 2008,2009 Eric Jarrige <jorasse@users.sourceforge.net>
- * Copyright (C) 2009 Ilya Yanok <yanok@emcraft.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/imx-regs.h>
-#include <asm/gpio.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int board_init(void)
-{
-#if defined(CONFIG_SYS_NAND_LARGEPAGE)
- struct system_control_regs *sc_regs =
- (struct system_control_regs *)IMX_SYSTEM_CTL_BASE;
-#endif
-
- gd->bd->bi_arch_number = MACH_TYPE_IMX27LITE;
- gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
-
-#ifdef CONFIG_MXC_UART
- mx27_uart1_init_pins();
-#endif
-#ifdef CONFIG_FEC_MXC
- mx27_fec_init_pins();
- imx_gpio_mode((GPIO_PORTC | GPIO_OUT | GPIO_PUEN | GPIO_GPIO | 31));
- gpio_set_value(GPIO_PORTC | 31, 1);
-#endif
-#ifdef CONFIG_MXC_MMC
-#if defined(CONFIG_MAGNESIUM)
- mx27_sd1_init_pins();
-#else
- mx27_sd2_init_pins();
-#endif
-#endif
-
-#if defined(CONFIG_SYS_NAND_LARGEPAGE)
- /*
- * set in FMCR NF_FMS Bit(5) to 1
- * (NAND Flash with 2 Kbyte page size)
- */
- writel(readl(&sc_regs->fmcr) | (1 << 5), &sc_regs->fmcr);
-#endif
- return 0;
-}
-
-int dram_init(void)
-{
- /* dram_init must store complete ramsize in gd->ram_size */
- gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
- PHYS_SDRAM_1_SIZE);
- return 0;
-}
-
-void dram_init_banksize(void)
-{
- gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
- gd->bd->bi_dram[0].size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
- PHYS_SDRAM_1_SIZE);
-#if CONFIG_NR_DRAM_BANKS > 1
- gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
- gd->bd->bi_dram[1].size = get_ram_size((void *)PHYS_SDRAM_2,
- PHYS_SDRAM_2_SIZE);
-#endif
-}
-
-int checkboard(void)
-{
- puts("Board: ");
- puts(CONFIG_BOARDNAME);
- return 0;
-}
diff --git a/board/logicpd/imx27lite/lowlevel_init.S b/board/logicpd/imx27lite/lowlevel_init.S
deleted file mode 100644
index 9cb702f..0000000
--- a/board/logicpd/imx27lite/lowlevel_init.S
+++ /dev/null
@@ -1,156 +0,0 @@
-/*
- * For clock initialization, see chapter 3 of the "MCIMX27 Multimedia
- * Applications Processor Reference Manual, Rev. 0.2".
- *
- * (C) Copyright 2008 Eric Jarrige <eric.jarrige@armadeus.org>
- * (C) Copyright 2009 Ilya Yanok <yanok@emcraft.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-
-#include <config.h>
-#include <asm/macro.h>
-#include <asm/arch/imx-regs.h>
-#include <generated/asm-offsets.h>
-
-SOC_ESDCTL_BASE_W: .word IMX_ESD_BASE
-SOC_SI_ID_REG_W: .word IMX_SYSTEM_CTL_BASE
-SDRAM_ESDCFG_T1_W: .word SDRAM_ESDCFG_REGISTER_VAL(0)
-SDRAM_ESDCFG_T2_W: .word SDRAM_ESDCFG_REGISTER_VAL(3)
-SDRAM_PRECHARGE_CMD_W: .word (ESDCTL_SDE | ESDCTL_SMODE_PRECHARGE | \
- ESDCTL_ROW13 | ESDCTL_COL10)
-SDRAM_AUTOREF_CMD_W: .word (ESDCTL_SDE | ESDCTL_SMODE_AUTO_REF | \
- ESDCTL_ROW13 | ESDCTL_COL10)
-SDRAM_LOADMODE_CMD_W: .word (ESDCTL_SDE | ESDCTL_SMODE_LOAD_MODE | \
- ESDCTL_ROW13 | ESDCTL_COL10)
-SDRAM_NORMAL_CMD_W: .word SDRAM_ESDCTL_REGISTER_VAL
-
-.macro init_aipi
- /*
- * setup AIPI1 and AIPI2
- */
- write32 AIPI1_PSR0, AIPI1_PSR0_VAL
- write32 AIPI1_PSR1, AIPI1_PSR1_VAL
- write32 AIPI2_PSR0, AIPI2_PSR0_VAL
- write32 AIPI2_PSR1, AIPI2_PSR1_VAL
-
-.endm /* init_aipi */
-
-.macro init_clock
- ldr r0, =CSCR
- /* disable MPLL/SPLL first */
- ldr r1, [r0]
- bic r1, r1, #(CSCR_MPEN|CSCR_SPEN)
- str r1, [r0]
-
- write32 MPCTL0, MPCTL0_VAL
- write32 SPCTL0, SPCTL0_VAL
-
- write32 CSCR, CSCR_VAL | CSCR_MPLL_RESTART | CSCR_SPLL_RESTART
-
- /*
- * add some delay here
- */
- wait_timer 0x1000
-
- /* peripheral clock divider */
- write32 PCDR0, PCDR0_VAL
- write32 PCDR1, PCDR1_VAL
-
- /* Configure PCCR0 and PCCR1 */
- write32 PCCR0, PCCR0_VAL
- write32 PCCR1, PCCR1_VAL
-
-.endm /* init_clock */
-
-.macro sdram_init
- ldr r0, SOC_ESDCTL_BASE_W
- mov r2, #PHYS_SDRAM_1
-
- /* Do initial reset */
- mov r1, #ESDMISC_MDDR_DL_RST
- str r1, [r0, #ESDMISC_ROF]
-
- /* Hold for more than 200ns */
- wait_timer 0x10000
-
- /* Activate LPDDR iface */
- mov r1, #ESDMISC_MDDREN
- str r1, [r0, #ESDMISC_ROF]
-
- /* Check The chip version TO1 or TO2 */
- ldr r1, SOC_SI_ID_REG_W
- ldr r1, [r1]
- ands r1, r1, #0xF0000000
- /* add Latency on CAS only for TO2 */
- ldreq r1, SDRAM_ESDCFG_T2_W
- ldrne r1, SDRAM_ESDCFG_T1_W
- str r1, [r0, #ESDCFG0_ROF]
-
- /* Run initialization sequence */
- ldr r1, SDRAM_PRECHARGE_CMD_W
- str r1, [r0, #ESDCTL0_ROF]
- ldr r1, [r2, #SDRAM_ALL_VAL]
-
- ldr r1, SDRAM_AUTOREF_CMD_W
- str r1, [r0, #ESDCTL0_ROF]
- ldr r1, [r2, #SDRAM_ALL_VAL]
- ldr r1, [r2, #SDRAM_ALL_VAL]
-
- ldr r1, SDRAM_LOADMODE_CMD_W
- str r1, [r0, #ESDCTL0_ROF]
- ldrb r1, [r2, #SDRAM_MODE_REGISTER_VAL]
- add r3, r2, #SDRAM_EXT_MODE_REGISTER_VAL
- ldrb r1, [r3]
-
- ldr r1, SDRAM_NORMAL_CMD_W
- str r1, [r0, #ESDCTL0_ROF]
-
-#if (CONFIG_NR_DRAM_BANKS > 1)
- /* 2nd sdram */
- mov r2, #PHYS_SDRAM_2
-
- /* Check The chip version TO1 or TO2 */
- ldr r1, SOC_SI_ID_REG_W
- ldr r1, [r1]
- ands r1, r1, #0xF0000000
- /* add Latency on CAS only for TO2 */
- ldreq r1, SDRAM_ESDCFG_T2_W
- ldrne r1, SDRAM_ESDCFG_T1_W
- str r1, [r0, #ESDCFG1_ROF]
-
- /* Run initialization sequence */
- ldr r1, SDRAM_PRECHARGE_CMD_W
- str r1, [r0, #ESDCTL1_ROF]
- ldr r1, [r2, #SDRAM_ALL_VAL]
-
- ldr r1, SDRAM_AUTOREF_CMD_W
- str r1, [r0, #ESDCTL1_ROF]
- ldr r1, [r2, #SDRAM_ALL_VAL]
- ldr r1, [r2, #SDRAM_ALL_VAL]
-
- ldr r1, SDRAM_LOADMODE_CMD_W
- str r1, [r0, #ESDCTL1_ROF]
- ldrb r1, [r2, #SDRAM_MODE_REGISTER_VAL]
- add r3, r2, #SDRAM_EXT_MODE_REGISTER_VAL
- ldrb r1, [r3]
-
- ldr r1, SDRAM_NORMAL_CMD_W
- str r1, [r0, #ESDCTL1_ROF]
-#endif /* CONFIG_NR_DRAM_BANKS > 1 */
-
-.endm /* sdram_init */
-
-.globl lowlevel_init
-lowlevel_init:
-
- mov r10, lr
-
- init_aipi
-
- init_clock
-
- sdram_init
-
- mov pc,r10
diff --git a/configs/imx27lite_defconfig b/configs/imx27lite_defconfig
deleted file mode 100644
index b02955d..0000000
--- a/configs/imx27lite_defconfig
+++ /dev/null
@@ -1,3 +0,0 @@
-CONFIG_ARM=y
-CONFIG_TARGET_IMX27LITE=y
-# CONFIG_CMD_SETEXPR is not set
diff --git a/configs/magnesium_defconfig b/configs/magnesium_defconfig
deleted file mode 100644
index 2fa6589..0000000
--- a/configs/magnesium_defconfig
+++ /dev/null
@@ -1,3 +0,0 @@
-CONFIG_ARM=y
-CONFIG_TARGET_MAGNESIUM=y
-# CONFIG_CMD_SETEXPR is not set
diff --git a/include/configs/imx27lite.h b/include/configs/imx27lite.h
deleted file mode 100644
index c18c35e..0000000
--- a/include/configs/imx27lite.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * Copyright (C) 2009 Ilya Yanok <yanok@emcraft.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/* include common defines/options for all imx27lite related boards */
-#include "imx27lite-common.h"
-/*
- * SoC Configuration
- */
-#define CONFIG_IMX27LITE
-#define CONFIG_HOSTNAME imx27
-#define CONFIG_BOARDNAME "LogicPD imx27lite\n"
-
-/*
- * Flash & Environment
- */
-#define CONFIG_SYS_FLASH_SECT_SZ 0x2000 /* 8KB sect size Intel Flash */
-#define CONFIG_ENV_OFFSET (PHYS_FLASH_SIZE - 0x20000)
-#define PHYS_FLASH_SIZE 0x200000
-#define CONFIG_ENV_SECT_SIZE 0x10000 /* Env sector Size */
-
-/*
- * SD/MMC
- */
-#define CONFIG_MXC_MCI_REGS_BASE 0x10014000
-
-/*
- * MTD partitions
- */
-#define MTDIDS_DEFAULT "nor0=physmap-flash.0,nand0=mxc_nand.0"
-#define MTDPARTS_DEFAULT \
- "mtdparts=" \
- "physmap-flash.0:" \
- "256k(U-Boot)," \
- "1664k(user)," \
- "64k(env1)," \
- "64k(env2);" \
- "mxc_nand.0:" \
- "128k(IPL-SPL)," \
- "4m(kernel)," \
- "22m(rootfs)," \
- "-(userfs)"
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/magnesium.h b/include/configs/magnesium.h
deleted file mode 100644
index 3364bde..0000000
--- a/include/configs/magnesium.h
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * Copyright (C) 2010 Heiko Schocher <hs@denx.de>
- *
- * based on:
- * Copyright (C) 2009 Ilya Yanok <yanok@emcraft.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/* include common defines/options for all imx27lite related boards */
-#include "imx27lite-common.h"
-
-/*
- * SoC Configuration
- */
-#define CONFIG_MAGNESIUM
-#define CONFIG_HOSTNAME magnesium
-#define CONFIG_BOARDNAME "Projectiondesign magnesium\n"
-
-/*
- * Flash & Environment
- */
-#define CONFIG_SYS_FLASH_SECT_SZ 0x8000 /* 64KB sect size */
-#define CONFIG_ENV_OFFSET (PHYS_FLASH_SIZE - 0x40000)
-#define PHYS_FLASH_SIZE 0x800000
-#define CONFIG_ENV_SECT_SIZE 0x20000 /* Env sector Size */
-
-/*
- * NAND
- */
-#define CONFIG_SYS_NAND_LARGEPAGE
-
-/*
- * SD/MMC
- */
-#define CONFIG_MXC_MCI_REGS_BASE 0x10013000
-
-/*
- * MTD partitions
- */
-#define MTDIDS_DEFAULT "nor0=physmap-flash.0,nand0=mxc_nand.0"
-#define MTDPARTS_DEFAULT \
- "mtdparts=" \
- "physmap-flash.0:" \
- "256k(U-Boot)," \
- "7680k(user)," \
- "128k(env1)," \
- "128k(env2);" \
- "mxc_nand.0:" \
- "128k(IPL-SPL)," \
- "4m(kernel)," \
- "22m(rootfs)," \
- "-(userfs)"
-
-#endif /* __CONFIG_H */